Controlling the page view between initial view, bookmarks and links

I have a 300 page InDesign document with links, buttons and bookmarks. The client wants it to open at an initial view of 50%. All of the other navigation is set to Inherent Zoom. This works well except the bookmarks which automatically switch to fit in window. (The bookmarks were made in InDesign). This happen whether they are used from the nav buttons (set as anchors) or using the side panel bookmarks for navigation.
If I go back and try to reset the view in bookmark properties in Acrobat it seems to add the 2 magnifications together.
Is there a way to set the bookmark to be at 50%? I tried going back to InDesign to set the bookmark when the magnification is at at certain % but that didn't seem to work either.
thanks!

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
I assume that you were referring to setting browser.tabs.onTop pref to false on the about:config page.
Current Firefox versions only show the "Tabs on Top" menu entry in the "View > Toolbars" and "Firefox > Options" menu and in toolbar context menus if the tabs aren't in the default position on top.

Similar Messages

Struggling with the page view of my link

Hello -
I made a 64 pg PDF with a Table of Contents that links to pages.
at the top of each page is a link to return to the TOC.
But when i return to that page, it only shows a portion of the page.
I can drag the marquee box in the page thumbnail version to encompass the whole page, but this will become very tiresome for the users i'm hoping will use the document.
I've looked all over and can't figure out even the correct question to ask (succinctly) as i search for an answer.
I've tried Page Display in Preferences... that didn't help.
So, i'm turning to 'the community'
If anyone has any suggestions, i'd be ever so grateful.
thanks in advance

Thanks, Gilad -
Luckily, i also figured out that i don't have to recreate the links, but in the Link Properties, can edit the action to FIT PAGE instead of zoom to Custom. So it was a bit less of a task. b

I unchecked the bar at the page top which has my bookmarks, and the bar that lets me type in new addresses. Now, I cant get them back on my page - any help? Thanks!

Must be a very simple procedure, but I am not very knowledgeable of computer interfaces, obviously.

If it is the menu bar that is missing, see the [[Menu bar is missing]] article, for other toolbars see [[Back and forward or other toolbar items are missing]].

Is it possible to widen the page view when drafting iWeb pages?

I'm drafting web pages via iWeb and figured out how to make the page content wider (in page layout/content width), but would like to be able to have a view of the entire page while I'm rearranging the text and images on the webpage. I cannot figure out how to be able to view the page without having to scroll left and right. Is it possible to see what the finished product looks like in its entirety before and/or after publishing to iWeb???

iLyzzard wrote:
Seems like my iMac with a 21.5 monitor should do the job. The webpages look great online, but how can I widen my draft-view so I don't have to keep guessing as to alignment of my text and images? Please advise.
I'm not really understanding your question since the way things look in iWeb is pretty much the way they look online.
In what way do your iWeb pages not look like what you see online?
This is really a feature in iWeb (and one which costs iWeb excessive code if anything): to be able to provide a WYSIWYG canvas on which to build.

Controlling the 'Rotate View Tool'

Hi there,
I'm a Flash/Flex developer working with PatchPanel and SwitchBoard to build AIR apps that can communicate with Creative Suite tools.
I was hoping to write a PatchPanel plug-in that would be able to control the 'Rotate View Tool' in Photoshop CS4 however, when I looked through the DOM there was no mention of it within the JavaScript Reference. My next tactic was to use the ScriptListener plug-in to record the action but alas, the resulting log did not contain the 'amount of rotation' as a variable :-(
Can anyone verify whether it is possible to dynamically control the 'Rotate View Tool'? If so, how would I go about passing the desired rotation value from my PatchPanel plug-in to Photoshop?
I should also say that I do not have access to the Photoshop SDK and have no experience of C++ but am willing to invest some time into solving this problem because I have something REALLY sweet planned. I'll keep it a surprise for now but if I can find a solution then I'd be more than happy to share it freely.
Many thanks in advance...
Cheers,
Andy McDonald
Centre for Advanced Textiles
Glasgow School of Art

Hi Andy,
It doesn't look like there are public APIs in the SDK. You've also found that what you want is not Actionable, thus no scripting support. Sorry.
Feel free to drop me an email and I can file a feature request.
regards,
steve

Doing a search is a mess as the default changes the page view-?

F/change in Indesign has a mode in my machine that jumps all the time to the founded work, not maintaining the page view.
It is a big problem as sometimes the words are out of sight (see screenshot); generally is a disorder.
If it is necessary to see the effect of some change in the whole page it is impossible as f/change focuses on the spot.
It is possible to alter this behaviour?

Thank you for this tip.
I tried it but continues the problem. Page is always jumping.
Your idea is to have two windows that sounds very clever.
But the f/change jumps in both (for the moment)
Steps you detailed:
Arrange > New window for <document name> tiles two windows with the same doc.
Set the view in window 1 to fit spread or fit page
Click in window 2 before running find/change.* If the window (1?, 2?) you are running find/change in is also zoomed to show the entire page the found text highlight travels through the page without changing the view.
If you zoom in on that window (1?, 2?), the view changes at the same zoom level to show the highlight. Window 2 does not change.
* If I click the other window the find/change by default will be executed on that clicked...

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Page Viewer to have links open a different page

I have a custom HTML page i have created that has links to site pages. I have a page viewer web part on my home page that points to this custom HTML page. I want it so when you click on a link on this html page, it doesn't just take you to the page
within the page viewer, but have the whole page navigate there.
I do not want the link to open a new tab or new window, just navigate from the home page to the page.
Any ideas?
I had it in a content editor before and it worked fine, but for some reason it changed all the hyperlink text to red, even though there is not one line in my css file to have any red text anywhere. Strange.
Thanks.

Hi,
According to your description, my understanding is that you want to redirect a new page directly outside the page view without tag or new window.
It could be achieved setting target attribute to _parent for <a> tag.
<a target="_parent" href="/sites/zhengyuGuo/">Click here to continue</a>
The link above will allow us open the link in the parent page.
More information:
Redirect the parent page from IFrame:
http://stackoverflow.com/questions/2092275/redirect-the-parent-page-from-iframe
Best regards,
Zhengyu Guo
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

All the pages I visit are being bookmarked under Unsorted bookmarks. This is a breach of privacy since anyone can check my browsing history. How do I stop this?

All the pages I visit are being bookmarked under Unsorted bookmarks. This is a breach of privacy since anyone can check my browsing history. How do I stop this? I have turned off Browsing History.

Firefox doesn't bookmark pages automatically to the Unsorted folder unless you click the star on the location bar.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

When opening a new tab, how can I change the page that is initially displayed?

When I open a new tab, the page that is initially displayed is one that provides a simple Bing! search. What can I do to make the initial display one of my own choosing?

Select Firefox (Top left) / Options/ Options / Main or General.
There you can select the thing you whant firefox to do when it is started up. If you would like it to open www.google.com for instance, you have to paste that url (= www.google.com) into the space below.
That's it!

My business has 100 ipads 3g with no control at the moment - i need to now control the ipads - what apps they can use - and restict certian use on the ipads - whats the best way to do this - it will need to be done remotley.

my business has 100 ipads 3g with no control at the moment - i need to now control the ipads - what apps they can use - and restict certian use on the ipads - whats the best way to do this - it will need to be done remotley.

MDM -- moble device management
MDMs
Airwatch, Meraki, MobileIron, Profile Manager on OS X Server, or Zenprise
For a comparison see this page:
http://www.enterpriseios.com/wiki/Comparison_MDM_Providers
Airwatch
http://www.air-watch.com/
Meraki -- A free MDM [ expect lots of email and phone calls about upgrades ]
http://www.meraki.com/products/systems-manager/
https://discussions.apple.com/thread/4067210?tstart=0
Good howto by Sergio Sosa.
https://discussions.apple.com/thread/2594001?start=15&tstart=0
MobileIron
http://www.mobileiron.com/
Profile Manager by Apple
Zenprise
http://www.zenprise.com/

I am looking to control a 4-way hydraulic solenoid valve. Do I need a PID control toolset, or can i control the system through my 16E4 daq card and scxi chasis

I am looking to control a 4-way hydraulic solenoid valve. Do I need a PID control toolset, or can i control the system through my 16E4 daq card and scxi chasis

I think you're asking 2 different questions.
The PID control toolset is for using PID loops for control; it's just software.
The DAQ card and scxi chassis are hardware. If you have the appropriate signal conditioning cards in your chassis to control/monitor your solenoid valve, then you can run a PID loop.
I believe the simple answer is: the PID control toolset is the best way to do control, but there are simple PID VI's (even on this website) that you can download and use for simple control.
Mark

Is there any changes in the DIAdem script between DIAdem 9.x and DIAdem 10.x ?

Hello,
I have got a question about DIAdem Script.
I saw the compatibility problem described in KB.
'Why do my DIAdem 9.1 Scripts not work in DIAdem 10?'
Many problems were solved, but some case were not.
So I guess there is some changes in the DIAdem script between DIAdem 9.x and DIAdem 10.x
Thanks for your help.

Hi supportko...
Yes, there were a lot of new features introduced in DIAdem 10.0, and 10.1. These are described in detail in each product's ReadMe file, and also in the Online Help under the "Index" tab at the node "DIAdem>>New Features>>New Commands and Variables"-- you will see 2 sections there: "Version 10.1", and "Version 10.0", showing you exactly what has changed. In most cases there is a compatability switch whenever a new feature creates a compatability issue for scripts developed in a previous DIAdem version. R&D works very hard to minimize the impact of new features on existing VBScript applications.
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Message Edited by Support on 05-02-2007 03:56 PM

What is the maximum distance between a time capsule and an airport express?

What is the maximum distance between a time capsule and an airport express?

You can only "extend" the signal one time, so you need to have the AirPort Express located approximately 1/2 to 2/3 of the distance from the Time Capsule to the area that needs more wireless coverage.
I doubt that this will help much since you have a very challenging setup. Wireless is really only for "same room" or "nearby rooms" around the corner.
To do this correctly you will need to use an Ethernet cable connection from the Time Capsule to the AirPort Express, which could then be located close to the xBox.
If it is not possible to run the Ethernet cable, you might look at a pair of Ethernet powerline adapters to send a "psuedo" Ethernet signal over the AC wiring in your home.
This will not be anywhere near the performance of a regular Ethernet cable, but it will likely be much better than wireless.
Since Ethernet over powerline (EOP) is somewhat unpredictable, you would want to have a very clear understanding of the store's return policy in case things don't work out as hoped. Any computer / electronics superstore will have a selection of powerline adapters to choose from.

Controlling the page view between initial view, bookmarks and links

Similar Messages

Maybe you are looking for