Controlling video independently from project controls

Hi! We are trying to make some specific thing in Captivate 5, Windows. Here is the description:
1. Make a new blank project (2 slides).
2. Insert FLV file on slide 2 (select skin 3).
3. Set video to autoplay.
4. Play the project (F4)
5. Pause the slide that contains the video - The video plays on.
6. You can now pause the video from its own skins control buttons.
7. When you set the video Timing: Synchronize with project, the video stops, when you pause the whole presentation, but you cannot control the video itself independetly from the presentation controls. You can only adjust the video volume.
Is there any way to make it work so, that when you pause the presentation, and the video pauses too, but then you can control the video, eg. scroll the progress bar and play? Scripts, actions, or something?
Cheers,
Jukka

You cannot do both - Either let the captivate synchromize the project and video or let the user control the playback (using a skin).
If you want captivate to do the synchronisation, then you can use this new feature in Captivate 5.0
Adobe Captivate 5 * Using slide video
-Sony

Similar Messages

Control for delivery from projects

Hi
Is there any way we can control the delivery of components from projects CNS0 using User statuses.
The components in project stock should not be delivered until the User status permits it.
Kindly advise.

Hi,
Please create a user status with business transaction "Goods Issue Delivery" as forbidden , and assign the status to the WBS element.
It should work. I have not tried it out though.
Muraleedharan.R

Clips from Project bin to source monitor causing video output to go out of sync(CS6 and CC)

Any footage I double-click or drag from the Project window to the Source monitor causes my video output to go out of sync. When I put the clips in the timeline, video goes back in sync and I'm able to view video output. My monitors are connected to a Blackmagic Intensity Shuttle Thunderbolt(9.7.5) via component and HDMI. Is this normal behavior in Premiere or is there a setting to enable this? No issues doing this in FCP7(clips from Project window to Canvas).
Can someone with an I/O from AJA, Matrox, or Blackmagic please test this out for me. Thanks...
2012 Macbook Pro
MacOS 10.8.3

Hi Joe,
How do you have your audio setup? Try the following.
- Set your OS system sound to Built-in or Line out audio
- Select Blackmagic for both Video and Audio in Preferences> Playback
- Select System Default Input/Output from Preferences> Audio Hardware
Hope this helps,
Peter Garaway
Adobe
Premiere Pro

How to make the audio track independent from the video track?

Can someone remind me how to make the audio track independent from the video track? My memory just went blank. Must be the age.
Thanks

Hi -
Select the clip in the timeline.
Type Command + L or go to the menu Modify > Link to toggle it off.
MtD

Export video clip from Premiere into an existing Encore project

New to encore.....love the software so far....but not much experience with it yet. Here is my question:
How do I go about exporting a video clip from premiere CS3 into an open/existing encore project. When I try to export to encore from the prem. timeline it makes a new proj. Sometimes I want to render out and export more than one asset into the same encore proj. but cant seem to figure out how to do that. any help would be great.
Thanks,
Eric

thanks J.....I have been doing it all along the way that you suggested. Just wondered if there might be a more efficient way to bring in multiple files. I appreciate your help with this....now at least I know that I am not doing things in a more difficult manner than necessary.
Thanks again!
~Eric

I DRAG AND DROP A VIDEO CLIP FROM THE EVENT BROWSER THAT IS 7.9 SECONDS INTO MY IMOVIE I'VE STARTED AND IT CHANGES IN THE PROJECT TO 4.9 SECONDS - HOW CAN I KEEP THE LENGTH THE SAME

I drag a video clip from Event to Project into my imovie I've started. The video clip length changes from 7.9 seconds to 4.9 seconds. How can I stop that length from being changed?

If you are using transitions either side of the clip they will use some of the clip to generate the effect, there isn't anything you can do unless you remove or shorten the transition.
If you aren't using transitions it may be that you are only selecting part of the clip in the event window, try dragging out the yellow frame to include all the video you want in the project.

Import video clip from other project

How to get video clip from other project?
I have been saving all the clips into one huge project and I think it is time to divide them into different projects.
Also, how do I know if the project would fit into one DVD when I burn it?
Your help is greatly appreciated.
Thank you,
Karen

You need iDVD for that.
See the iMovie tutorials (in html and QT movie form) at:
http://www.apple.com/support/imovie/
(Scroll down a bit)
See the iMovie tutorials (in pdf form) at:
http://manuals.info.apple.com/en/iMovieAtAGlance.pdf
http://manuals.info.apple.com/en/iMovieHDGettingStarted.pdf
http://manuals.info.apple.com/en/iMovieLesson1.pdf
http://manuals.info.apple.com/en/iMovieLesson2.pdf
http://manuals.info.apple.com/en/iMovieLesson3.pdf
http://manuals.info.apple.com/en/iMovieLesson4.pdf
http://manuals.info.apple.com/en/iMovieLesson5.pdf
http://manuals.info.apple.com/en/iMovieLesson6.pdf
http://manuals.info.apple.com/en/iMovieLesson7.pdf
See the iDVD tutorial at:
http://manuals.info.apple.com/en/iDVDAtAGlance.pdf
http://manuals.info.apple.com/en/iDVD5GettingStarted.pdf
http://manuals.info.apple.com/en/iDVDTutorial.pdf

How can I import video clips from my Kodak Z740?

I have done this three times, and now I am unable to. I am losing my mind! I believe that when I did it before, I imported pictures first off the camera into iPhoto, then I pushed the import button again and the movie clips came in, which I then transferred to iMovie. This isn't working now. Help!

Hi Brealyn - welcome to iMovie Discussions!
Can you tell us more about what you are wanting to do?
Are you wanting to use movie clips from your digital still camera to make an iMovie video?
What part of the process is not working now? Are you able to import the still pictures into iPhoto successfully?
Can you also import the movie clips successfully, or is that the problem area?
If you have been able to import them, can you then not get them into iMovie?
Are you saying that you have succeeded three times in getting movie clips like that into iMovie?
Lots of questions!! Just want to clearly establish what you have managed before and what you cannot do now.
The following info comes from the iMovie Help Menu:
MPEG-4 video cameras (which yours is) may not have a FireWire connection, but have a USB connection. To transfer the video from and MPEG-4 device to your computer, connect the device to your computer using a USB cable. Your MPEG-4 camera or device appears as a hard disk on your desktop. You can open the hard disk icon and drag the video footage into your iMovie HD project or to your desktop for importing later.
When importing footage from an MPEG-4 device, your video is imported as a single clip into your project; iMovie HD does not break it up into cllps automatically. You cannot use the capture controls to import your video or control your camera. You cannot use the Make a Magic iMovie feature to import video automatically from an MPEG-4 camera connected by a USB cable.
The Help Menu is really worth looking at.

HELP !! --- Three Video Outputs from FM2-A55M-E35

I have put together a PC using FM2-A55M-E35 and A55 AMD CPU Chip set from Newegg.com a few weeks ago. I got a pleasant surprised that the HDMI, RGB and DVI-i, each connecting to one monitor, can project to each monitors as a distinct screen. Under the screen property, ,I can have a full three monitors setup showing monitor 1, 2, and 3. It works nicely.
Last night, the harddisk crashed (shouldn't have used a used harddisk). So I re-build the system from scratch.
However, when I load the driver CD that came with the motherboard, the driver program does not recognize any Video section at all. Whatever happen to the BIOS, it looks like from within Windows 7 the program does not understand the video any more. The motherboard basically has a SVGA output via HDMI and DVI. both showing the same content. When I go into the display property under Widnows, I can only see ONE monitor. It also shows SVGA, not the powerful video that the motherboard-CPU combo can do.
When I was in the BIOS, I restored the setting to default but it did not fix anything. The goal is to allow the video feature be restored to working with three distinct outputs.
I toggled the video setting from one to the other, it did not fix anything.
I am asking for HELP!. Worse yet, this is my work computer and I really need to have it fixed ASAP.
Tony

More information on the Video Card integration problem, but no success yet.
I plugged in the second monitor; an Acer AL2223W LCD connected to one of the ports on the EVGA GeForce GT 610 card, to see if it would be recognized. It displays "No Signal" when turned on.
Did a search on the computer and found the AMD VISION Engine Control Center. That had a place to search for video equipment and the only thing it would find is the Samsung 213T.
I verified that the fan on the card is running so the card is getting power via the PCI-E slot.
The 2 outputs on the video card and the receptacle on the Acer are DVI-I dual link configuration with 24 pins + 4 pins at the flat pin for analog signals. The Samsung has a DVI-D dual link receptacle (24 pins).
The cable is DVI-D Single Link (18 pins + the flat pin). When I get another cable it will be DVI-D Dual Link.
It seems that the EVGA GeForce GT 610 video card is not being recognized by the mother board or not putting out a signal.
There was no driver disk with either the video card or the computer.
Power supply is 430 Watts and the card specs say the PS should be at least 300 Watts.
Do I need to do something with the BIOS or get a driver or setup disk for the board or card or do something with a jumper on the MB?
Do I need to get the DVI-D Dual Link cable to get the signal from the Video Card to the Monitor?
Thanks for any help you can give me.
Bob Campbell

Video out from MacBook Pro to HDTV - no solution?

I've had this problem for over a year now and nobody has been able to help me solve it, not even the Apple guys. I need to get the video out from my MacBook Pro (Mini DisplayPort) to my HDTV which is an older model which only has Y/Pb/Pr analogue video inputs. Does anyone know which connectors I can use in order to get 1080i on my TV? My thoughts were MDP to VGA first so that we get an analogue signal, and then VGA to Y/Pb/Pr? Would this work? Why/why not? Please help!!!

See whether this sounds like it might be the answer:
http://www.startech.com/item-features/VGA2NTSCPRO-High-Resolution-PC-VGA-to-TV-C onverter-with-Remote-Control.aspx
Don't hesitate to call Startech's tech support people to check on its suitability for your purposes.

I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked. What am I doing wrong?

I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked, so that when I delete a song from one library it deletes from the other one.
On the online tutorials I've seen it shows that when you create a new iTunes library it should open as a blank account, but that isn't happening.
What am I doing wrong?

If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
If necessary:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X

Delivery from Project with reference to sales order

Dear All,
I am facing problem in delivery. In my case scenario is-
1. There are 10 materials with 20 quantities.
2. I create a sales order only for two material with 5 quantities and enter wbs element number.
Now when i use CNS0, enter sales order number and wbs elelment number system shows all 10 materials that I dont want means I want the materials that are included in sales order. Please help me how to control this.

Please read SAP Help for a better under standing...
I mentioned below a line from SAP help for your info.
...... it selects material components, the system takes components into account that have been assigned to either a network or ...... ...
Please follow the below path to access the help..
SAP Help Portal >>> Logistics >>>> Project System >>> Material >>>> Delivery from Projects......

Since upgrading to FF Ver. 24, I can no longer view videos/clips from fox News. What add-on do I need? Everything else seems to be working OK.

Since upgrading to ver. 24, I can no longer view the video clips from Fox News. the clip comes up but will not play. I don't have a problem using IE. I seldom use IE and FF is my main browser. What add-on or control do I need to rectify this situation? My e-mail is [email protected]
''(email obfuscated - please be cautious with posting your email address - c)''

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Can the 12 Ports of the PCI 6508 set independent from each other to I and O?

Hello,
can the 12 Ports of the PCI 6508 set independent from each other to I and O?
Or are they configured in groups like A, B and C ports?
Thanks,
BFutzi

Hello,
I am upgrading from Traditional DAQ to DAQmx on an old installation with a PXI-6508 board.
I struggle with this reset problem.
I read the post from NI "Archived: PCI DIO-96/PXI 6508/PCI 6503 Digital Ports cannot be Controlled Independently".
This post states:
"NI-DAQmx is expected to work around this issue by resetting the other ports of the 8255 to the last known state.This means that the other ports may momentarily be reset, but will return to their previously set values."
Does anyone can confirm that this is true?
I notice that e.a. port 11 is reset when I write to port 10, but the values of port 11 are not set to the last value I had written to it.
Herwig.

Possible to "grab" a video clip from a web page?

I am listening to a video clip (spoken by a favorite writer of mine,
http://anon.salon.speedera.net/anon.salon/mp3s/nin1.mp3 ) and I would like to get it, have it, and put it in my hard drive to listen to with a single click. Is this possible? To "grab" a video clip from the Internet?
Lorna in Southern California

Lorna,
the trick is not to hold down the shift key and then
press the rightmost arrow on the QT player, but hold
down the Ctr key instead.
.......... Lorna says .............................................
Hello, Mr. Ouderkirk.......... I FEEL LIKE THE BIGGEST NERD ON THE PLANET. I read your reply and also the reply of NewMacGuru and do not see any of the items to which you both refer. First of all, I actually was able to get the download by following Mike Wong's instructions, but you were very kind to reply and I want to acknowledge you (and I also want to learn what you are trying to teach me!!).
The thing for me is: I see a blank screen with a video clip icon. There are no down arrows, there is no indication of a QUICKTIME player anywhere. Thus, your and NewMacGuru's instructions to me to click this and that thing is like telling the nomad in the desert, "Find that Coke machine, insert 75¢, and the can will fall out" and the nomad is sitting there on his camel, scratching all the hairs out of his head. (But in a loving way.)
A menu will appear giving you the option to save the
movie to the desktop (at least it does that on my
computer, but I do use QT Pro)
An alternative for you could be to use Ambrosia
software's 'Wiretap' which lets you grap any sound
that your computer produces.
Have fun.
Harry
.......... Lorna says .............................................
Harry, I like the idea of Ambrosia, but there is the Basic 101 part of my brain that wants me to understand everyone's explanations. Maybe this is a bad thing for me and maybe I should just be glad that there are ways to do things without understanding what one is doing -- like iWeb making a webite without knowing a lick of HTML.
So.... imagine me seeing a white screen with no arrows, no nothng except that long thin horizontal icon of a video control bar, and you will see my predicament. BUT THANK YOU FOR TRYING, HARRY.
Lorna in Southern California

Controlling video independently from project controls

Similar Messages

Maybe you are looking for