Controlling which WDS base station a machine connects to... how?

I'm trying to isolate a problem I've got with a simple WDS configuration. Configuration is:
Airport Extreme (n) Fast Ethernet - main WDS
Airport Extreme (Snow) - relay
Airport Express - remote
Due to configuration, machines that connect to the Express can also 'just see' the other two machines. One of them (a CoreDuo iMac) is reporting very poor Airport signal strength - even when the Airport Express is plugged in within 2 feet of the machine. We think that it is connecting to one of the other base stations - but can't work out how to find out if this is so, and if so how to stop it.
The iMac has recently returned from Applecare having had a new screen installed - is it possible that the airport antenna could have been disconnected as part of this? This might explain problem - but again I can't work out how to test this.
Suggestions anyone?

Airport Extreme (Snow) - relay
I know that you mean round AirPort Extreme base station (AEBS) but I want to clarify something.
There is not a snow AEBS. Referring to it that way is confusing because there IS an 802.11b Dual-Ethenret (aka "snow") AirPort base station (ABS). The snow ABS does not do WDS and does not have a USB port.
The iMac has recently returned from Applecare having had a new screen installed - is it possible that the airport antenna could have been disconnected as part of this?
Quite possibly.
There isn't any way to control which base station it connects to BUT you can see which one it is connected to. If the iMac is running OS 10.5, hold down the OPTION key while selecting the network name on the AirPort menu. You will see the MAC address of the base station which the iMac is connected to.

Similar Messages

  • How do I know which AirPort base station I am connected to?

    I have an AirPort network which consists of a Time Capsule and 2 AirPort Expresses connected in 'extended' mode. I want to test each of the AirPort Express units to ensure that they are doing what they should be (i.e. extending my network). However, I can't figure out how to determine which base station I'm actually connected to at any given moment. When I look at the AirPort status in the menu bar or at Network Preferences it simply tells me the name of the network that I'm connected to but not the specific AirPort unit. Is there any way to see this information?
    For all I know, I could be connected to the Time Capsule no matter when in my home I'm located.
    Cheers,
    Barry

    OK, let's recheck some settings as you definitely should not be picking up a wireless signal from the TC if you have an Express much closer to the computer.
    Using AirPort Utility here, click your TC and click Manual Setup.
    Click the Wireless tab below the icons
    Wireless Mode should be set to "Create a wireless network"
    There must be a check mark next to "Allow this network to be extended"
    Update to save any changes.
    On each Express, using Manual Setup again.
    Wireless Mode set to "Extend a wireless network"
    The network name that the TC is creating should be displayed
    There must be a check mark next to "Allow wireless clients"
    Please check your settings to verify. Then start with only one Express device and put it in a another room not too far away from the TC. Power it up and keep your laptop close to the Express. Using the "option" click on the Airport icon, test to see if you see the MAC address of the Express. Any luck? If yes, then power down the first Express and test the second the same way, etc.
    The "extend" a wireless network feature works like the hub and spoke of a wheel. The main router is the hub and Express devices are at the ends of the spokes. Each Express communicates directly with the TC. There are no "relays" or "in between" devices. If the TC is at one end of the house, you may find that you get better results using fewer Expresses. It will take some experimenting to get the best location for each Express, etc.

  • How to control an Apple Base Station with 3rd-party wireless card?

    I recently upgraded my early 2004 Power Mac G5 2GHz DP to the 802.11n standard using a Newertechnology MAXPower 802.11n/g/b Wireless PCI Adapter to communicate with my new "n"-standard 2TB Time Capsule. My G5 shipped with an 802.11g-standard Airport Card which I disconnected when I installed the PCI card to avoid hardware conflicts. The new n-standard wireless set-up works without a problem, but having lost the Apple Airport Card, I no longer have the ability to control/manipulate the Timecapsule via the third-party card e.g. I cannot connect/disconnect my internet connection or otherwise troubleshoot the base station.
    So, the question is, how can control an Apple base station with a third-party wireless card? As it stands now, I must boot up my laptop just to see if I have a connection.
    My thanks in advance,
    T. North
    Brussels, Belgium

    Thanks for the assistance. Yes, I can indeed administer the Time Capsule from inside the Airport Utility, but I am still unable to connect or disconnect the Internet connection like you can with an Airport card (using the Airport drop-down menu.) If my ISP signal drops for whatever reason (which is does often) I have to boot up my laptop just to reconnect. Is there some feature within the Airport Utility that permits one to connect/disconnect the signal? If there is, I haven't found it yet.

  • This Airport Extreme base station can't connect to iCloud

    I have a Airport Extreme base station (model A1408) running firmware 7.6.4.
    In troubleshooting a Back to My Mac issue, I noticed that the configuration page for the base station had a yellow dot next to my apple id in the "Back to My Mac" section of the "Base Station" tab, with words underneath that say, "This Airport Extreme base station can't connect to iCloud".
    When I delete the id and re-enter it, the dot goes green and no errors are generated (the id/password tokens are accepted). Then, I push "Update", and after the base station comes back, the light is yellow again. (To be clear, the dot next to the apple id is yellow, not the base station status light, which is always green.)
    I'm connected to Xfinity Cable Internet service via a Motorola SB6141.
    Everything iCloud related works for my various iOS and MacOS devices except Back to My Mac.
    Can anyone point me to a solution? I've already been through Apple's troubleshooting and support docs related to Back to My Mac.
    Thanks in advance!

    NEVER MIND!
    After reverting to the old LinkSys router, I left the AEBS powered up all night. This morning, I tried once again and the AEBS mysteriously started working with my laptop after reconnecting and power-cycling the cable modem. Go figure!
    Unfortunately, the iMac in another room doesn't seem to be able to join the new network, but I'll close this thread and perhaps open a new one after doing some more trouble-shooting.
    Thanks for your comments and suggestions.
    -- Mike

  • I connected the TC T2 with the iMac and used Air Port Utility to have it join my existing network. Now I have green lights on Apple Base Station and TC with the cable connected to the Base Station because hen connected to TC -- I get only yellow lights fl

    I connected the TC T2 with the iMac and used Air Port Utility to have it join my existing network. Now I have green lights on Apple Base Station and TC with the cable connected to the Base Station because hen connected to TC -- I get only yellow lights flashing on both devices> 
    When Connected through the Apple Base station I have perfect internet wireless capability thru-out house.
    Lamont

    I connected the TC T2 with the iMac and used Air Port Utility to have it join my existing network. Now I have green lights on Apple Base Station and TC with the cable connected to the Base Station because hen connected to TC -- I get only yellow lights flashing on both devices> 
    When Connected through the Apple Base station I have perfect internet wireless capability thru-out house.
    Lamont

  • I have an airport extreme base station and have no clue how to set up a private wireless network instead ton open one i have now.

    I have an airport extreme base station and have no clue how to change to a pawword type network from the network i have now that is free to the neighbor hood.

    Which version of the AirPort Utility are you using?

  • I just had Uverse installed.  The iMac which was my base station is now connected via my household electric ground connection.  Another computer is now the base station.  I have connected my Time Capsule to my computer by USB cable, but can't set it up

    I just had Uverse installed.  My iMac desktop has been the base station for my wi fi, but we had to connect it via ground wire of my electrical system and use another desktop as the base station [with windows op system].  We have connected my Time Capsule to the computer via USB cable.  I believe that will require setting up the Capsule to use Ethernet, but the instructiions on the install disc only talk about using Airport.  How can I find instructions for setting up using USB cable and Ethernet?
    Thanks!
    Charles Leach

    All the manuals are listed at the head of the thread.
    https://discussions.apple.com/community/wireless/time_capsule?view=overview
    The TC cannot connect to the computer by USB.. it is network device.. it only connects by ethernet or wireless.. usb is for external drive or printer.

  • Can Airport Extreme Base Station 802.11g Connect To Park's Free WiFi?

    The RV resort where I'm staying has free WiFi for Internet connections. It shows up on my iBook's Airport list of possible networks in the menu bar, along with my own local network which is an older Airport Extreme Base Station (white dome 802.11g) which has my HP printer plugged into it via an ethernet cable.
    However, when I am connected to the park's WiFi via the laptop's Airport network choices, I am NOT connected to my AEBS, and therefore cannot print to the printer wirelesslessly. Is there a way for the AEBS to make the connection to the park's WiFi so I can use both Internet and printer from my iBook G4 without having to switch from one network to use the other?

    Is there a way for the AEBS to make the connection to the park's WiFi so I can use both Internet and printer from my iBook G4 without having to switch from one network to use the other?
    Sorry, but no. You cannot connect your iBook's AirPort to more than one wireless network at a time. Since it will be highly unlikely that you will be able to create a Wireless Distribution System (WDS) between your RV resort's Wi-Fi and the 802.11g AirPort Extreme Base Station (AEBS), you won't be able to extend it to meet your needs.

  • Airport Extreme 802.11g base station loses internet connection often

    I just installed an Airport Extreme base station (802.11g version Apple Base Station V5.7) last week. And it keeps dropping my internet connection at least once a day.
    I simply replaced an old SMC Barricade wireless router that died (and was a POS). But I only had to reset the SMC about once every 2 months. Nothing else has changed in my setup. Only the router/base station is different.
    The wireless part is fine. Even when the internet connection gets dropped the hard wired AND wireless clients can still access the local network. Reseting the DSL modem has no effect. The only solution is to power cycle (unplug and plug back in) the AEBS OR restart it from Airport Admin utility.
    But you can't do that from offsite. When the AEBS drops the internet connection I can't access my office network from home!
    Is there a place in Airport Admin Utility which tells you the status of your internet connection like most generic wireless routers with web-based software do?
    Any ideas on resolving this?
    Thanks

    "Any ideas on resolving this?"
    Looter,
    Based on your description, open AirPort Admin Utility and check the configuration of your main base station on the "Internet" pane. If you're using ethernet cable from the modem to the base station, the top selector [Connect Using:] should show "Ethernet" and the second selector [Configure:] should show "Using DHCP"
    Also, check your iMac's System Preferences>Network at "Show: AirPort" and check the PPPoE pane which should show no entries (unless your isp requires its use), and the TCP/IP pane which should show "Configure IPv4:" as being "Using DHCP" - while all other info is filled in automatically.
    "Is there a place in Airport Admin Utility which tells you the status of your internet connection like most generic wireless routers with web-based software do?"
    No, the AirPort Admin Utility is not web-based, only located on your computer with the information available to it necessary to operate the AirPort system. It does not actually administer the signal. I think that is done only by System Preferences>Network.
    "I'm actually referring to the Airport Express base station not my MacBook Pro's wireless connection. Is there anywhere in the Airport Admin Utility software that tells you the status of the AEBS' internet connection NOT the wireless connection."
    No, that info is not available in that utility. The information you seek is at System Preferences>Network, but only after the system scans for it. Click the "Assist me..." button and then, on the "Do you need assistance setting up a new network connection or solving a network problem?" panel that opens, click the "Diagnostics..." button. A "Network Diagnostics" panel will then open and if its scan shows there is no internet the lights to the left of "Internet" and "Server" will be yellow instead of green. Meanwhile, it continues scanning for the connection until it is re-established. I determined this by pulling my cable from the phone jack, later reinserting it.
    Further information that may be helpful to you can undoubtedly be found in threads such as this other one:
    http://discussions.apple.com/thread.jspa?threadID=884049&tstart=0
    edit-
    In re-reading, I may not have given you what you need. It sounds as if you may be "timing out" somehow on your connection. You might want to check around at some of your log-on settings to see if there is that possibility connected to one of them, even though the only thing I can think of is the "Renew DHCP Lease" button which is unknown to me, as I've never used it.
    Message was edited by: myhighway

  • I am trying to stop my Xbox from connecting to my Airport extreme base station and only connect to my airport express extender.  Anyone have any ideas?

    I have an aiport extreme base station in my living room and an airport express in my bedroom extending the network.  For some reason my xbox along with some other devices always connects to the extreme base station in the living room which has a very low signal.  Is there a way to setup a seperate network for my express extender so that I can connect only certain devices?  HELP

    You would probably want your Express to join the network if an extender isn't required. Reset to factory settings and join the network.
    If you do want your Express as an extender run an Ethernet cable between the Express and the Verizon router and set the Express up to be in bridge mode, with the same WiFi network name and password as your Verizon router.

  • AE Base station will not connect to Internet

    First of all, let me state that I have been lurking here for about a month, trying to fix this on my own, before writing this post. The problem: My base station sends out a strong signal, and shows a green light, but the network diagnostics on my computer say that it is not connected to the ISP or server.
    I have tried (MANY times) the fix offered by Tesserax in this post: http://discussions.apple.com/thread.jspa?messageID=5750473&#5750473
    which, in my opinion, should have fixed it. I paid a consultant from the local Apple reseller to come and have a look at it. He checked the modem settings and the base station, and concluded that the base station was defective (it was brand new) and I sent it back and got a replacement model from Apple.
    The new base station has exactly the same problem. It won't connect to the ISP or the server. I brought it in to work, plugged it into the ethernet cable here, and it works just fine. It connects to the internet perfectly. (Incidently, I checked it using the same laptop I have at home).
    So it seems obvious to me that the problem lies somewhere in the communication between my home modem and the base station. (The home modem does connect to the internet when I plug it directly into the computer).
    But I still don't know what I can do other than reset the modem! I have rebooted it at least 25 times, left it unplugged overnight and everything...
    Please help!

    Would you be able to go over the internet settings with me? I find it a bit confusing.
    Either connect to the AEBS's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, using the AirPort Admin Utility, try these settings:
    AirPort tab
    o Base Station Name: <whatever you wish or use the default>
    o AirPort Network Name: <whatever you wish or use the default>
    o Create a closed network (unchecked)
    o Wireless Security: Not enabled
    o Channel: Automatic
    o Mode: 802.11b/g Compatible
    Internet tab
    o Connect Using: Ethernet
    o Configure: Using DHCP
    o WAN Ethernet Port: Automatic
    Network tab
    o Distribute IP addresses (checked)
    o Share a single IP address (using DHCP & NAT) (enabled)
    Once you verified that you can get Internet access for all of your computers, you should secure your wireless network. To do so, I suggest that you make these changes:
    My modem is set up to work as a DHCP server. In that case, the AEBS should NOT be configured to use DHCP as well, right?
    The AEBS should be configured for DHCP. Since the modem is connected to the AEBS's WAN port, only the AEBS will receive the modem's DHCP-assigned address. In turn, computers connected to the AEBS will get their IP addresses from the AEBS.

  • Airport Utility fails to see Airport Extreme Only an Older Base Station no longer connected

    Very weird what's happened... earlier this morning there was a power failure (none of my 2 computers were ON, and they are plugged in thru UPS with power surge/outage capabilities).
    I turned my old Macbook Pro (2007) and everythign is fine. My Mac Pro (2008) is fine but it can't connect to the internet.
    I've resetted both the modem and the Airport Extreme Base Station.
    I've restarted and resetted the PRAM on my Mac Pro.
    I've tried many times to diagnose it/change settings/create new network with Network and Airport Utility to no avail.
    When I open Airport Utility on the Macbook Pro, it shows the Airport Extreme and it all looks fine... when I open Airport Utility on the Mac Pro, it only sees an old Snow/Graphite Base Station I haven't had plugged in in a log time. It doesn't see anything else.
    I've tried trashing the Airport Utility preferences as well... but still nothing. The Wif Fi icon shows a '!'. When I click on it, the pull down menu shows an "Alert: No Internet Connection", but it still shows my network  (and the neighbours' network) and it even has the check mark next to my network... ???
    I'm running 10.8.5 and Airport Utility 6.3.1.
    Please. Help.

    Just a quick update, spent 90 minutes on the phone with apple support today.  If I boot the mac in safe mode, the airport utility can see the base station.
    In the course of trouble shooting, a test account was created, but the airport utility had the same issue.  It proved that there isn't anything wrong with any of the hardware at the very least, and points to user level configuration problems (unfortunately, I was not able to sort that out with support).
    Regards,
    Seth

  • Swap out which is base station in 2 extreme set up

    Hi. I have two extremes. One is the base station and connected (wired) to the cable modem the other acts as a wireless signal booster for the other half of the house (non wired).  My issue is this the base station has only two of the three available ports going out available (lightening fried the other). The wireless one has all 3 ports available. My son wants to connect his xbox to the base station (via wire) my computer needs to be connected to the base station (wired) and our World book is connected to the base station. He constantly unplugs my wired computer connection for his xbox. A major inconvienience since they are top floor and basement away from each other.  Can I just swap out the location of the two extremes for each other (so the one with all 3 ports working is the base unit) or will I need to reconfigure them in order to do this? If I need to reconfigure them do I just copy over the setting from one to the other?  Thanks for the help.
    Running a windows 7 computer.

    You can swap the AiPort Extremes, but both of them will need to be completely re-configured....quite a chore.
    If all you really need are more Ethernet ports, it would be simple matter to add a 5-port Ethernet switch to one of the Ethernet ports on the "main" AirPort Extreme to create more connection capability.
    Any computer / electronics superstore will have what you need.  Something like this, for example:
    http://www.walmart.com/ip/5-Port-Gigabit-Ethernet-Switch-10-100-1000-Mbps/101048 35
    Just connect an Ethernet cable from one of the working ports on the AirPort Extreme to the switch. Now you have 4 available Ethernet ports for devices. If you need even more connections, you can buy an 8-port switch, 16-port switch, etc.

  • How do I tell what version airport express I have?  Airport Utility says this version does not support this base station.  What to do, how to update?

    I tried to add an older airport express to my network that I had not been using.  It shows up in Airport Utility but Airport Utility says that this version of Airport Utility Dies not support this base station.   I am running airport utility V6.3.4 on a mac mini running OS X 10.10.  Not sure which airport express it is, nor how to check.  I assume I need a firmware upgrade on the Airport Express, but not sure how to do this without Airport Utility.  I tried to download an older version of Airport Utility, but could not install because it does not support OS X 10.10   Any ideas other than throwing a perfectly good airport express away?

    Don't throw the AE away. It is still very useful as I have both the old & new each work well (sometimes the sound keeps dropping out but I think that has to do with the wirless settings!!!)
    You need Airport Utility 5.6.1 which works in 10.10 - I managed to download a .dmg from the net but not sure how I could get it to you.
    The new utility doesn't support  the old AEs unfortunately which I have and Apple have no intention of allowing a utility that will cover all
    AEs.
    Try and get a version 5.6.1.

  • Which base station am I connected to using WDS?

    I think I successfully set up WDS at home. I have an Extreme set up as the main station on the second floor of my home. I have an Express set up as the remote station on the first floor. I used Airport Admin Utility to set up after hard resets to both.
    If I carry my PowerBook from the second floor down to the first, will it automatically connect to the Express down there for a better signal? I have set both Airport units to use channel 2, interference robustness and a mulitcast rate of 5.5. It seems if I turn off IR, I have trouble connecting, so I'm leaving it on. The Extreme has the name of JCLR, and the Express' name is JCO, but the network is named JandC on both. Did I do it right?

    Thanks Rich. But whenever I pick up my PowerBook and go downstairs to where the remote Express is, it stays connected to the Extreme upstairs, even though I'm just a few feet from the Express down there. If I wake it from sleep, it connects to the closest one correctly, but if I move around while online it doesn't, unless I turn my PowerBook's Airport card off and on again.
    Any ideas? Is there a setting I'm missing somewhere?

Maybe you are looking for