Controls on the $79.00 MA850G/A Earbuds go wacky while running

On my second in-ear headphones with remote and mic ($79.00 ones). Same problem with both - controls function fine. When I've run about 15 minutes, the remote volume controls stop working and when I get to about 45 minutes or more, the tracking control starts to go bonkers - pauses, starts, jumps forward, jumps back. Thought I had a defective product initially, but same thing is happening with my second set now. Anyone else experience this? Solutions? I use a 120GB iPod and have it in an armband while I run. Only thing I can think about is whether sweating could be an issue. (a few hours later, everything is fine again.) Thanks

I have the same problem.
I just used mine for the second time today. After about 10 or 15 minutes of running the volume controls stopped working and still don't work (it's been about an hour).
I use the new iPod Shuffle. This is a problem because it doesn't have any volume or tracking controls on the Shuffle itself. If these headphones don't work then the new Shuffle can't be used for working out. Really disappointing...

Similar Messages

The remote server returned an error: (401) Unauthorized. while running client context using sharepoint client object model

Hi,
I have started using the client object model so that i do not have to go to sharepoint admins to perform some basic operations on remote server. While assigning list item level permission i am getting following error, could you please help. thanks.
The remote server returned an error: (401) Unauthorized.
   at
System.Net.HttpWebRequest.GetResponse()
   at
Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute()
   at
Microsoft.SharePoint.Client.ClientContext.EnsureFormDigest()
   at
Microsoft.SharePoint.Client.ClientContext.ExecuteQuery()
   at
SetDowntimeItemPermission.SetPermission.Main(String[] args) in

it seems your request was unauthenticated i'm not sure are you using a web application with FBA or desktop application my suggestion would be try to impersonate your request by passing network credentials (COM works on network credentials )
NetworkCredential credentials = new NetworkCredential("username", "pwd", "domain");
ClientContext context = new ClientContext("http://site-url");
context.Credentials = credentials;
Best Regards, Ashutosh | SharePoint World

After deploy into weblogic server while running the application-404 Error

Hi All,
Created an ADF application and Deployed this application to Weblogic server.
I am getting the below error After deploy into weblogic server while running the application
I am able to run this application well in JDeveloper using the IntegratedWebLogicServer.
The Application is successfully deployed to the Web Logic server.
While creating the domain, I have extended the Oracle JRF classes.
Error
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
JDeveloper Version : 11.1.1.3.0
Weblogic Version : 10.3.3.0
Thanks
Satish

On the Deployments look for the Testing tab.. you will see your test link to check your deployment ..
Some times.. for some reasons( which i dontKnow :( it doesnt identify with m/c name.. repalce it with IP address..and give a try.. if its on local /c u can try 127.0.0.1 /(or local host too)

How to find the missing fonts while running the script?

hi,
I need to create a script to find the missing font. not only for that. Actually i created a script to read the file properties. but i have a problem while running the script.
I have put "User Interation Level" to never interact. Even i need to check wheather each file have "missing fonts". mean time i never stop the script.
Is It Possible???
Regards,
SubhaOviya

Here's a shot of the Find Font Dialog:
Papyrus (highlighted in the list) is missing, and there's a yellow warning triangle to show that. Fonts that ar not missing have an icon to show the type of font. You'll also see it shown as missing in the "Info" box at the bottom of the dialog.
If you use the Replace With dropdown you will only see fonts listed that are installed on the system. In order to actually use the missing font, rather than substitute a different font in its place, you must obtain and install the missing font on the system.
Are you seeing something different when you open Find Font?

"A critical error has occurred while running the virtual machine and the machine execution has been stopped"

I have the following error:
"A critical error has occurred while running the virtual machine and the machine execution has been stopped"
When I am installing grid clusterware and when is copying files from one node to other I received that virtualbox error and is stop working.
Can somebody give me any hint how to solve it ?
Thank you
Eugen

I think that is not a Clusterware issue, The clusterware installation may generating a high load on your machine and Virtual Box is not supporting.
Check vbox.log file to identify root cause.

Is there a way of connecting the ipad to the smart board in the classroom, so that the smartboard is the control, and the ipad is displaying what is on the smartboard? This is to help a visually impaired child see what is on the smartboard.,

Is there a way of connecting the ipad to the smart board in the classroom, so that the smartboard is the control, and the ipad is displaying what is on the smartboard? This is to help a visually impaired child see what is on the smartboard.

Absolutely!
Install Splashtop2 on the PC and enable it to be controlled or ran from iPad or Reflection to simply allow iPad to serve as PC unwired monitor. With Splashtop and an Apple TV connected, you use the smartboard as usual, yet the PC and iPad can see the same content. The impaired child can even interact with the Smart Board via the iPad as if he were writing directly on the big screen. Erasing functions can be done by touching the Smart Board manual controls. Several variables are in play that cause this lack of functionality:
    Apple won't permit PC software that infringes its proprietary apps.
    Smart Board companies refuse to develop iPad apps because they feel threatened and are being replaced by iPads
    School districts think Apple TV is meant for copyright infringement and could expose them to safe harbor lawsuits
    Network administrators make it impossible to login Apple TVs because they don't want the streaming occurring
    Classrooms are not able to keep up with the technology of using the iPad
    Clicker companies refuse to play with iPad because they see it as a potential threat to their core business clients
    Apple is not working as hard as it could to exploit its capabilities in education, thus losing money in iPad sales
The bottom line is that we educators and technology developers are hurting our childern with petty conflicts.

System message at CKM3 - Control if the ordered item absorbed the cost

I have created an exclusive free goods agreement and I would like the ordered item to absorb the cost of the free goods. In order to transfer the correct information to CO-PA from SD billing, I have made the required customizations ( 1- Deactivated pricing in the item category of the free item    2- Set the cumulate indicator in copying control for the billing item). Now I want to control the result with the TCode CKM3 but it gives ot the following error message. Can anybody explain me what I should do step by step?
Thanks in advance.
Diagnosis
     In valuation area 9999 data can only be converted for the material ledger if the material ledger is active.
System response
     No data was converted in valuation area 9999 for the material ledger.
Action for the system administrator
     If the material ledger should be active in valuation area 9999 and you wish to convert data, use the Product Cost Controlling section of Customizing to activate the material ledger for this valuation area.

Hi Yasar
From the above post i understand that you are getting an error about valuation. Hence i think that the valuation area assignment is improper.
Check that, that should solve your issue
Regards
Ranjeet
Edited by: Ranjeet Rajendra Jain on Feb 11, 2008 2:41 PM

User-developed Fan Control for the S10(e)

Hello and welcome.
When you've searched the internet and found this thread, it's possible that you are an owner of a Lenovo Ideapad S10 or S10e which has a little problem with the behaviour and/or the noise of the fan. In this post you will get all the informations you need to handle this problem for yourself. It should also be the same on every S9/S9e.
Just a few comments before we begin:
This is not an official support or solution by Lenovo.
We are just normal users as you are, but we get rid of the fan and wanted to find a way to handle it. So if you want to try anything of the methods described here you have to know that you'll do all this only at your own risk. We are not responsible for any damages of your device. You should only use these methods if you know what you are doing.
Please note that this thread is only for discussing, improving, trouble shooting and perhaps extending the fan control utilities. Any general complaints about the fan problem itself should be placed in the original thread right here: http://forums.lenovo.com/lnv/board/message?board.id=IdeaPad_Netbook&thread.id=795. It already has 80+ pages (the link goes to the first page) and it is better to exclude all the fan control stuff because there it's very difficult to keep an overview.
Here you may post all of your questions, ideas/brainstorming, concerns, thanks and so on and you are really invited to participate and be an active member.
In this first part of this post I'm going to summarize all information about using a fan control utility. For any newbie it will be enough to read this post to get all necessary information. The second part does the same for developement of fan control utilities as we still have no known or working fan control utility for Linux, Mac OS X and other OSs I've forgotten - for now.
For getting started you need a S10 or S10e with an up-to-date BIOS. For the S10 it's the 90 67, for the S10e the 66.
The battery issue
Under very specific circumstances - that we haven't figured out yet - it might happen that your Lenovo S9/10(e) no longer detects the battery while using S10FanControl or S10Fan. It might occur after 2 minutes, it might occur after 2 months, it might never occur. It does not occur using Notebook Hardware Control.
It can be solved by removing the battery, waiting 10 seconds and put it back in. Then the battery is re-initialized and the detection works again.
S10FanControl - Windows
The first utility is S10FanControl created by user dresslerc. The current version is 1.0.0.1, available here: http://www.mediafire.com/file/yd5xmnrnijf/S10FanCtrl1.0.0.1.zip. After you've downloaded it you just have to extract it and start the .EXE in the "Release" folder. Here are the notes and the description dresslerc posted right here:
Everyone,
I've uploaded a version which everyone can use to test with. Remember this is still a TEST version although I think it works for the most part. It should work both on the S10/S10e.
Please install the .NET Framework 2.0 or later first.
Then click here to download the exe: http://www.mediafire.com/?jlg2enkjdxn
Once downloaded, extract the files and hit hte S10FanCtrl.Exe. Once this program launches you should be able to control the fan. Keep in mind that if you lower the fan speed then it'll take upto 30 seconds before the S10 registers the change, so be patient.
I've only tested this on the latest BIOS 59. I am sure it will work on the 57 as well but the individual speeds might not work properly on that version. Please try it out and report back.
The only issue that I heard so far is that occasionally the fan will kick in regardless if in Manual/Smart Mode. Also the temp it shows may not be accurate. If you find any other issues please let me know what they are so I can attempt to fix them.
Once we have all the kinks worked out then I will release the source.
Heres a quick Video: http://www.youtube.com/watch?v=_PKl70ZgmFg
REMEMBER: USE PROGRAM AT YOUR OWN RISK!!! I AM NOT RESPONSIBLE FOR ANY DAMAGES THIS PROGRAM MIGHT CAUSE.
Application Use:
BIOS Controlled - Fan is controlled by the BIOS
Smart Mode - Fan is controlled based on the conifguration in the options. You can set the threshold here at what temp you want the fan to kick in...
Manual - Fan is controlled manually by the slider.
If you want to have the program startup automatically, then place a shortcut of the app in the PROGRAM FILES -> STARTUP folder. Then you may want to go to the options and make the application minimize at startup.
Edit:
It seems there are some issues with the app and the S10e or previous BIOS versions. Will post a fix asap.
The source code for S10FanControl is available here: http://www.mediafire.com/?sharekey=7a3fb99d33817c08c2b435915e8821d7e04e75f6e8ebb871, written in Visual Basic .NET 2008.
S10Fan - Windows
The second utility is a tool written by user slash:
Hi guys,
Well it looks like Lenovo dropped this matter after all. Anyway, I have here another fan controller to add to the bunch. I have been using it for some time now without any problems. It is for both S10 and S10e.
What the program does is basically the same as others. The S10's fan speed is controlled according to the ACPI thermal zone temperature. By over writing the values which resides at offset 50h of the EC register at an appropriate timing, the ACPI thermal zone temperature is over ridden. The program is written in C and uses WinIo created by Sysinternals. The GUI version is available now.
It should be noted that the fan speed temperature thresholds differs with BIOS version. For 14CN67WW and 14CW90WW the fan changes speed at temperatures 60c, 65c, 70c, and 80c. Furthermore, the BIOS will automatically shutdown the S10 if the temperature reaches 90c.
The program has a fail safe mechanism that automatically disables itself if the actual ACPI thermal zone temperature goes above 85c. This allows the BIOS to regain control and the fan will work as intended by Lenovo. If the temperature drops below 85c the program will take over control again.
To run the program, you will need administrative privileges.
Known working BIOS versions: 14cn58ww, 14cn60ww, 14cn67ww, 14cn90ww
The program will work with any BIOS version as long as the BIOS uses the 50h EC register readouts to control the fan.
build 2009.05.24
Higher priorities for EC commands.
Usage: The program will run in the system tray. Double click or right click and use the menu to open the program. To determine the BIOS temperature thresholds, use the 'Setup' button. To run at boot time, place a short cut in the startup folder.
http://www.mediafire.com/file/njhz0icym2t/S10Fan.zip build 2009.05.23
Usage: S10Fan.exe
Added GUI.
build 2009.05.17
Usage: S10Fan.exe 60 65 70 80 70 75 80 85
S10Fan.exe test
The first 4 values are the BIOS temperature thresholds, the latter 4 are new thresholds that we want to over ride with. To determine the BIOS temperature thresholds, use the 'test' option.
build 2009.03.16
Usage: S10Fan.exe 70 75 80 85
-Slash
For updates and newer releases please check slash's post: http://forums.lenovo.com/lnv/board/message?board.id=IdeaPad_Netbook&view=by_date_ascending&message.i...
Notebook Hardware Control - Windows
The third utility is a profile for Notebook Hardware Control. I've adapted it from a profile for the Lenovo N500 which I've found here: http://nhc.yourcopy.de/overview/. With the manual for creating the profiles that can be found here: http://www.notebook-treff.de/board/database/hilfsprogramme-f%C3%BCr-nhc/92-how-to-create-an-acpi-fil... I was able to change the ACPI commands to work on the S10(e).
Installation and setup is divided in two steps. The program Notebook Hardware Control (NHC) is available at http://www.pbus-167.com/. Install the program, but do not start it for now. Then you need my NHCConfig utility, available here: http://forum.eeepcnews.de/download/file.php?id=1476. It detects your model number and BIOS-version via WMI and writes a proper S10(e) profile to the NHC acpi directory. The GUI is German if you have a German Windows and English if not. Additional languages can be added.
After you've extracted the ZIP-file you have to start the nhcc.exe (requires .NET Framework 2.0). At first a message appears that you use the program at your own risk. Then you can choose if you want to apply your own settings (experts) or if you just want the program to run with my defaults (newbies). In the settings window you can see your system details on the left, you can set up your thresholds in the middle and you can set the fan speed you want on the right. Then click on execute.
Now start NHC. Go to the "Settings" tab and click on "Show all NHC options and settings". Then a few more tabs appear. Go to the "ACPI" tab and check if the "ACPI Control System" is running (if everything works, the message "ACPI Control System running" will appear, otherwise it says "ACPI control system is not yet configured for this system"). Now click on "Show ACPI Control System details".
Here you can change the temperature values the fan control depends on (the settings from NHCC are the default values). On the bottom of the window you can see the "Current CPU temperature". That is the value you have to deal with. In general it has a value of around 60°C. In the middle you can see four user editable temperature values. You can leave the values as they are if everything works. The on/off values are responsible for the temperatures at which the fan starts running and stops again after cooling the device. The level values are responsible for the fan speed, for example you can set the off_level higher to let the fan run all the time at the lowest level, if the values do not fit for your device or whatever.
You can switch between NHC and BIOS control by disabling or enabling the "ACPI Control System" or by closing NHC.
Q:
A:
With every utility it is possible that it takes some time until you see an effect after you've started the program. Any failure of the programs should be no big problem because the only thing that should happen is that the BIOS controls the fan. Another issue that might occur due to the way the fan is controlled is that the fan may start running for a very short time and it looks like the fan control has lost control. The fan should stop immediately or at least after a few seconds.
Keep in mind that running the S10(e) with a fan control means that the S10(e) has to deal with higher temperatures. That could mean that the device will not last for 10 years but only 9 years (who uses a netbook so long...?). In every case you need a tool for monitoring your cpu temperature. We know that especially Core Temp 0.99.5 and Real Temp 3.00 do a very good job. That is important because the temperature values you need to set up the fan control are different from the values reported by the cpu sensor, they are between 15°C and 20°C higher. A normal temperature reported by the monitoring should be around 40°C, with the NHC default values the fan starts running at 52°C and stops at 38°C.
Q:
A:
Q:
A:
END using fan control
BEGINNING developing fan control
Controlling the S10(e)'s fan is a litte bit difficult because it looks like there is no way to control it directly. But it is possible to manipulate the temperature the BIOS fan control depends on. As long as the built-in fan control thinks that the cpu is cool enough the fan stays off. And that is exactly the point where we can attack.
The fan control depends on a field called RTMP in the memory of the embedded controller. It can be accessed via "_SB.PCI0.LPCB.EC0.ERAM", the offset of RTMP is 0x50 (hex) or 80 (dec). It is a direct I/O read/write. The complete NHC command for reading the value is: ACPI.FIELD.ReadByOffset("_SB.PCI0.LPCB.EC0.ERAM", ref value, 0x50, 8) with "value" as the variable which gets the value.
What program logic do you need? You need a timer or something else that conducts an always-refresh cycle. It sounds very easy: You read the value, manipulate it and write it back. And it is that easy, you just have to keep some things in mind.
This refresh has to be done very often. The procedure must be very thin and quick. Also the bus that is used to communicate with the EC is a problem, but since the S10e BIOS 66 it became a minor problem for me because it looks like the built-in fan control now depends on some kind of average value over the last few seconds and it doesn't really matter if one write-cycle is failing.
The read-event must be placed before the write-event. Otherwise you just read your manipulated value. The field is filled by the system regularly, so you just have to test if the read_value is different from the written_value, then you know that the field was filled with a "fresh" value. Like "if read_temperatue <> written_temperature then real_cpu_temperature = read_temperature else do nothing".
About the values you have to write back... you will have to test and play a bit. My experience is that you can select three fan levels, starting at 59°, 62° and 70° - at least with the NHC profile and my S10e it's like that. It's some trial 'n' error. My fan stays off at < 59°, but you should select a very low value for fan_off like 30°. In my opinion it switches off much faster the lower the written value is. But it's just a feeling, I haven't measured it.
Q:
A:
Q:
A:
Perhaps some users from countries with other languages than German and English can add tags for "fan", "control" and "noise".
Note from Moderator: Minor edits in title and disclaimer.
Message Edited by JaneL on 04-25-2009 02:32 PM

Great opening post Carsten!
The latest bios:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-71252 (BIOS 66)
The FSB can be reduced from 133MHz to 100MHz using SetFSB, this also reduces the heat:
http://www13.plala.or.jp/setfsb/
clockgen = SLG8SP513V
If you add a shortcut to the startup folder the program will start at startup. Under properties you can change the target to:
"C:\Program Files\SetFSB\setfsb.exe" -s100 -b1 -cg[SLG8SP513V] -w20
So it starts with a FSB of 100Mhz, in the background, with the right clock generator, after 20 seconds.
Message Edited by quazar on 04-25-2009 05:07 AM

Custom Infotype - Using Table control in the screen. IN OM

Hi,
I am having a requriement where in I need to create a custom infotype using table control in the screen. I have to create this in OM and I am using PPCI transaction to create the info type. I am able to create the infotype with fields but not table control. Please let me know if any one of you came across and help me with the process I need to follow.
Thanks in advance.
Venkat.

Hello,
After you create the info type throug PPCi, you can directly go to the Sceen module program created automatically while creating Info type and edit the screen.
activate it after your changes.
Regards,
Srujan.

How can i distinguish two controls with the same name?

I'm recording automated tests with VS 2012 Coded Ui Test for testing a web application.
In that web application it is possible to enter data in something looking like a list.
There is - per example - an Edit control sitting on a ColumnHeader with the name/text "Description".
Below that header is another Edit control for data input - containing the text "Description" too and which lies on a Cell control.
When i playback my recording, Coded UI Test looks for a control with the name "Description" and gets the one, it finds at first.
In that case the Edit on the ColumnHeader, which causes an exception, when the Text will be setted with the data input from the recording.
Unfortunately the controls have no ID.
Is there a way to distinguish controls with the same name?
Thanks in advance!

Hi Patrick Pirzer,
>>Is there a way to distinguish controls with the same name?
Based on the blog "How does “Coded UI test” finds a control ??", we know that to really find a control, it would be related to the unique properties as the search properties,
so if two controls have the same property, please use other unique property as the search property would be better.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I make one control change the entry list of another?

I am using LabView 2010 and would like to create a custom control, in which there are two ring controls (among other things).
The options shown in one ring menu should depend on what option is picked in the other ring menu.
How does one do that?
Solved!
Go to Solution.

Well the data that goes into the two rings will have to be initialised somehow... Or by constant array, or by reading them from file.
If you don't want to change your code, I would defenitly getting the string you want to get from file.
But still, to update the 2 rings, you will have to update the strings in the 2nd control on the fly.
FILE :
[OPTIONS]
Option1=...
Option2=...
[POSSIBLE_SELECTIONS]
Selection1.Parent=1
Selection1.Name=...
Selection2.Parent=1
Selection2.Name=...
This is how you could set up the file. where options are the items which your are going to put in the first ring.
Depending on that selection you will go fill out the names in the second ring depening on which parent is selected in the first ring
Kind regards,
- Bjorn -
Have fun using LabVIEW... and if you like my answer, please pay me back in Kudo's
LabVIEW 5.1 - LabVIEW 2012

HT5622 Have Family Mobile with 2 phones and only one Apple ID can all be controlled by the main phone?

Have Family Mobile with 2 phones and only one Apple ID can all be controlled by the main phone?

angiefromaustin wrote:
Yes I know the password for Apple ID.
Then there should be no issue for you.
angiefromaustin wrote:
I do not know the password to get onto the 3G phone to make changes or update apps etc.
Then there is more than one Apple ID involved.... Or a Restrictions Passcode has been set.
angiefromaustin wrote:
2 phones and only one Apple ID
Then what do you mean by this ?

My Apple TV can control all the apple devices in my home including my other family members devices why?

My Apple TV can control all the apple devices in my home including my other family members devices why? I have home sharing on so my MacBook pro, iPad, and iPhone can be put on my tv. How do I only contol my devices?

Lots of questions but essentially you want to try three steps:
Reset the power on the device
- issue continue?
Reset all settings from: Settings > General > Reset all settings > Reset All Settings
- issue continue?
Restore the devices software: Settings > General > Restore > Retore
- issue continue?
You likely have a hardware issue. Visit an Apple Retail Store

My kid dropped my iPad 2 and the volume control on the side got jammed in and now everytime my ipad is on the volume icon in the middle of the screen will not go away. I can not move the switch on the side, it is jammed, is there a way to fix it?

My kids dropped my iPad and the volume control on the side got jammed in and it will not move, how can I fix this? Can it be pulled out to unstuck it. The glass got chipped right next to it, but it is not that noticible. Everything else works on the iPad, but the other problem is that I am past my 90 day warrenty and it will cost me $265.00 to have Apple fix it. Is there anyway I can save my iPad?

Your warranty is actually one year - the 90-days is only for free telephone support - but the warranty would not cover damage due to the iPad being dropped. I doubt there's anything you can do to fix the rocker, so you'll probably need to pay to get the iPad exchanged (by Apple) or repaired (by a third party repair service).
Regards.

How to find out which control triggered the event?

In my program, there are six buttons that does similar things, like changing the value of an array depending on which button is clicked. I used an event structure to do this. However, instead of repeating my codes six times in six events (one for each button click), I'd like to program one event case that responds to any of the six buttons. The question is, how do I know which button is clicked inside the case (any of the button can be either false or true, so reading the button value won't help)?
Solved!
Go to Solution.

Steve Chandler wrote:
Jeff Bohrer wrote:
Oh when will the snipet tool get fixed?
Jeff, are you using Ton Plomp's Code Capture tool? It is awesome for a lot of reasons. The nicest part is that when you do a capture it saves the snippet to a temporary file and places the path to the temp file in the clipboard. You can create a VI, capture a selection, then in the browse for image control on the forum you just paste the file name from the clipboard. No need to go through the hassle of saving the snippet first then browsing for it.
Unfortunatly I'm behind a curtain here that discourages third party tools. I know of the third party stuff but it might as well not exist unless it comes on the installation DVD. Thanks for the response though some other member may find the link useful
I can't even load Firefox on this machine and am stuck with IE
Jeff

Controls on the $79.00 MA850G/A Earbuds go wacky while running

Similar Messages

Maybe you are looking for