Convergence and Calendar Server 6.3

Good Morning,
We are in the process of looking at upgrading to Convergence 2.0. We are still running Calendar Server 6.3. From looking at the wiki page: https://wikis.oracle.com/display/CommSuite/Convergence+Patches+by+Release
It appears that I can install Convergence 2 Patch 2 and still be compatible with Calendar Server 6.3. Is that correct?
We need to get upgraded so that we have the support for newer versions of IE and to get our customization done before looking to upgrade to Calendar Server 7.
Thanks,
Doug

Yes, Calendar 6.3 (patch -44 or higher) is compatible with Convergence 2.
See https://wikis.oracle.com/display/CommSuite7U2/Communications+Suite+Component+Products+Release+Notes#CommunicationsSuiteComponentProductsReleaseNotes-commsuiterequirements
When you are ready to migrate to Calendar 7, you might be interested in:
Creating a Calendar Server 6 and Calendar Server 7 Coexistent Deployment
https://wikis.oracle.com/display/CommSuite/Creating+a+Calendar+Server+6+and+Calendar+Server+7+Coexistent+Deployment
and
Calendar Server 6 and Calendar Server 7 Comparison and Coexistence
https://wikis.oracle.com/display/CommSuite/Calendar+Server+6+and+Calendar+Server+7+Comparison+and+Coexistence
until the migration is complete.

Similar Messages

Convergence and Calendar Server 7

I did installed the Calendar Server 7 and Sun Convergence 1 Update 3. But, reviewing the Convergence 1 Update 3 requirements this product can be integrated with Calendar Server 6.3 or higer but Calendar Server 7 doesn´t have support for this product (Convergence).
There is an new version or patch for the Convergence Server that support Calendar Server 7?. If NOT please let know when the new release is going to be available?.
In the case the answer is YES, please let me know where I can get it?
Thanks is advance.

shjorth wrote:
bootbk wrote:
I did installed the Calendar Server 7 and Sun Convergence 1 Update 3. But, reviewing the Convergence 1 Update 3 requirements this product can be integrated with Calendar Server 6.3 or higer but Calendar Server 7 doesn´t have support for this product (Convergence).Calendar Server 7 is a completely different product to Calendar Server 6.3. The "or higher" refers to the patch level of Calendar Server 6.3.
There is an new version or patch for the Convergence Server that support Calendar Server 7?Convergence 2 will support Calendar Server 7 update 1.
If NOT please let know when the new release is going to be available?. ~3-4 months as part of Comm-Suite-7 update 1.
Regards,
Shane.Thanks

Contacts and Calendar Server, Pointless?

Hello!
MLS N00B here, not really much experience with ML Server. Only had it a few weeks, and the new Profile Managaer instead of WGM thing really messed me around, seems unstable and a little too new.
Anyway. Todays discussion comes in the shape of Contacts and Calendar server. What are they actually for?
Profile Manager pushed a payload to all users (by default) so they know where the calendar and contacts server is. This seems to be a side effect of activating the services in the Server app. However, the client computers don't actually seem to use them in any way.
No contacts, not even the Directory contacts (searching via directory is enabled) are visible in the Contacts app. Nothing 'network' based in calendars either.
Group calendars are also a mystery to me.
My question is. Where would you create a 'Group' based contact list, or a 'Group' specific calendar? and make them available automagically (using PM) to all users within that group?
I've tried creating Wiki specific calendars and assigning the correct groups and permissions, but I can't see how I'd get them in to iCal. I've even tried adding extra iCal payloads to the groups in PM and using the URL field - still nothing.
Any help is welcome, thanks guys

The 'server' Contacts and Calendars services in OS X server don't work the way you would expect — like the functionality you would see on a server app like Microsoft Exchange. That is that various users can have shared resources and/or you have server owned resources that you then make available to users/groups with individual, fine-grained permissions.
You can have 'shared' server Contacts & Calendars in OS X Server but what you have to do is setup a (dedicated) user account on which you then create various calendars and address book(s). Then in the Calendar & Contacts apps on OS X and iOS you make accounts on the clients and use that pseudo account on the server as the account — not each individual users' account on the server. So each (real) user 'shares' the pseudo user's account with, obviously, full read-write access.
It ain't beautiful... but it works.

How to best set up a mail and calendar server for a church

I am the IT guy for a smaller church of 200 regular attendees. We want to start hosting our own mail and calendar server. We bought a mac mini and installed mac os x server. So far I have enabled the mail, calendar, and contacts sections of the server but we aren't live quite yet (domain is not pointed at the server yet). My question is, I do not know much about profile manager or open directory, would those benefit me at all? I do not wish to manage devices, I just want to make the most use out of the computer as a mail server primarily. I have found some limitations on users and groups where I wish I could do more (such as creating mailing lists that include e-mails that are not hosted from within the server without creating a user that forwards to personal e-mail for every person).
Would open directory and/or profile manager add more functionality to the computer as a mail server?
Thank you

@camelot
What is it exactly open directory will give me that I cannot do with the regular software in this regard? I am not sure what you mean by a signle shared mailbox and calendar.
@cpragman
Google apps for business was something I was looking into at one point but decided not to use it. Once we grow more I can see us moving over to it but with just maybe 5 people tops having a real e-mail address it seems a little overkill. (I apologize, I omitted that from my original question, i only put in the number of attendees)
@Lincdavis
Fortunately I don't care about whether they can create it themselves or not . And your comment about creating a sharing-only user. Do you mean for every external e-mail I want in a mailing list, I need to create a user for them (with services disabled) and then change mail options to forward to their personal e-mail?
Then go back to groups, create a group that can be e-mailed, and add those users to it?
Thanks

Messaging Server and Calendar Server Mount points for SAN

Hi! Jay,
We are planning to configure "JES 05Q4" Messaging and Calendar Servers on 2 v490 Servers running Solaris 9.0, Sun Cluster, Sun Volume Manager and UFS. The Servers will be connected to the SAN (EMC Symmetrix) for storage.
I have the following questions:
1. What are the SAN mount points to be setup for Messaging Server?
I was planning to have the following on SAN:
- /opt/SUNWmsgsr
- /var/opt/SUNWmsgsr
- Sun Cluster (Global Devices)
Are there any other mount points that needs to be on SAN for Messaging to be configured on Sun Cluster?
2. What are the SAN mount points to be setup for Calendar Server?
I was planning to have the following on SAN:
- /opt/SUNWics5
- /var/opt/SUNWics5
- /etc/opt/SUNWics5
3. What are the SAN mount points to be setup for Web Server (v 6.0) for Delegated Admin 1.2?
- /opt/ES60 (Planned location for Web Server)
Delegated Admin will be installed under /opt/ES60/ida12
Directory server will be on its own cluster. Are there any other storage needs to be considered?
Also, Is there a good document that walks through step-by-step on how to install Messaging, Calendar and Web Server on 2 node Sun Cluster.
The installation document doesn't do a good job or atleast I am seeing a lot of gaps.
Thanks

Hi,
There are basically two choices..
a) Have local binaries in cluster nodes (e.g 2 nodes) ... which means there will be two sets of binaries, one on each node in your case.
Then when you configure the software ..you will have to point the data directory to a cluster filesystem which may not be neccasarily global. But this filsystem should be mountable on both nodes.
The advantage of this method is that ... during patching and similar system maintenance activities....the downtime is minimum...
The disadvantage is that you have to maintain two sets of binaries ..i.e patch twice.
The suggested filesystems can be e.g.
/opt for local binaries
/SJE/SUNWmsgr for data (used during configure option)
This will mean installing the binaries twice...
b) Having a single copy of binaries on clustered filesystem....
This was the norm in iMS5.2 era ...and Sun would recommend this...though I have seen type a) also for iMs 5.2
This means there should no configuration files in local fs. Everything related to iPlanet on clustered filesystem.
I have not come accross type b) post SUNONE i.e 6.x .....it seems 6.x has to keep some files on the local filesystem anyway..so b) is either not possible or needs some special configuration
so may be you should try a) ...
The Sequence would be ..
After the cluster framework is ready:
1) Insall the binaries on both side
2 ) Install agent on one side
3) switch the filesytem resource on any node
4) Configure the software with the clustered FS
5) Switch the filesystem resource on the other node and useconfig of first node.
Cheers--

User Access for Messaging Server and Calendar Server

This is the first time i have setup JES. What i did was install Messaging, Calendar, Directory and Administration server. I did a configure after install option and followed the post install instructions for all of those servers.
I then started the administration console and added a user via the crete user option under "users and groups". Next i tried to logon as the user i just created via webmail and pop (exchange) and get an error message stating that the user does not exist. I did a search on the user via that admin server console and i did find the user and the "mail account" option was selected. I also verified the password was correct.
My main question is what am i doing wrong?
My goal is to create a email and calndar server using JES. I also want webmail.
Do i need to configure Identity Manager to create users for mail / calendar? Or do i create the users using the directory server / administration console?
Also i didnt setup delegated administrator. I didnt think i needed it becasue i will configure all of this using on administrator. If i dont need multiple administrators do i need delegated admin.
Here is some background information.
Sun W2100Z
4GB RAM
Solaris 10 01/06 x86
JES 2005 Q4
Thanks for any assistance.

You can not use the Administration console for creating Messaging users. Look-up "provisioning users" in the Messaging admin guide. If you're using schema 1, use Delegated Administrator. If you're using schema 2, use commadmin.
HTH,
Roger S.

Groupware Integration with Third party Email and calendar server

Hi All,
We are trying to integrate email, calender and other standard collaboration features with EP7.0.
As per the standard provided by SAP, only Lotus Notes and Exchange transports are provided by SAP.
I would appreciate if some one can guide on how to go about integration this collaboration features with thrid party email and calendar servers other than MS Exchange and Lotus notes.
I have this link but it does not provide information in more detail.
https://media.sdn.sap.com/html/submitted_docs/nw_kmc/howto/coll/How%20To%20Build%20a%20Groupware%20Connector.html
Appreciate your help
Regards
PN

Dear All.
Appreciate if any one can provide pointers in the right direction.
Thanks
PN

Convergence and messaging server http access

Hi,
Sun Java(tm) System Messaging Server 7.0-0.04 32bit (built Jun 20 2008)
libimta.so 7.0-0.04 32bit (built 01:01:00, Jun 20 2008)
Using /opt/sun/comms/messaging/config/imta.cnf
# /opt/sun/comms/iwc/sbin/iwcadmin -V
Sun Convergence 1.0-0.44 (built Jul 07 2008,09:50:03)
Convergence can't login into messaging server:
[06/Nov/2008:21:30:06 +0100] comms httpd[18455]: Account Notice: [x.x.x.x:47323] Password verification failed
[06/Nov/2008:21:30:06 +0100] comms httpd[18455]: Account Notice: badlogin: [x.x.x.x:47323] proxy admin [email protected]: user not found
[06/Nov/2008:21:30:08 +0100] comms httpd[18455]: Account Notice: close [x.x.x.x:47323] [unauthenticated] 2008/11/6 21:30:06 0:00:02 259 247 0
[06/Nov/2008:21:35:01 +0100] comms httpd[18455]: Account Information: connect [127.0.0.1:47369]
[06/Nov/2008:21:35:01 +0100] comms httpd[18455]: General Information: [127.0.0.1:47369] HEAD / HTTP/1.0
[06/Nov/2008:21:35:01 +0100] comms httpd[18455]: Account Notice: close [127.0.0.1:47369] [unauthenticated] 2008/11/6 21:35:01 0:00:00 17 216 0
IMAP/POP/SMTP works - I can use [email protected] from Thunderbird.
Everything works before I created a new domains in Delegated Administrator. Before that Convergence worked with Messaging Server.
Any idea?
Thanks

estibi wrote:
[06/Nov/2008:21:30:06 +0100] comms httpd[18455]: Account Notice: [x.x.x.x:47323] Password verification failed
[06/Nov/2008:21:30:06 +0100] comms httpd[18455]: Account Notice: badlogin: [x.x.x.x:47323] proxy admin [email protected]: user not found
This error is due to the password for the "admin" user being invalid.
Everything works before I created a new domains in Delegated Administrator. Before that Convergence worked with Messaging Server.Try resetting the admin username/password e.g.
./iwcadmin -u <iwcadminuser> -w <iwcadminpass> -o mail.proxyadminid -v [email protected]
./iwcadmin -u <iwcadminuser> -w <iwcadminpass> -o mail.proxyadminpwd -v <adminpassword>Regards,
Shane.

How I migrated my caldav data (Contacts and Calendars) to Mavericks + Server

Hello,
I write this post to share with you the steps I had to take for correctly migrating my caldav database (containing data for Addressbook and Calendar Server) from a Lion Server to Mavericks with Server version 3.
The problem occured like this : after downloading and installing mavericks (from the Apple Store), and downloading/installing the Server Utility (version 3), everything migrated just fine, except I had an error message during the first launch of the Server utility, but since it eventually launched, and the services were running, I didn't notice anything at first.
But I rapidly saw a big problem : my caldav data was missing. If a client connected to their calendar application, they would get (after syncing with the server) a new empty calendar named "calendar" (this is typical of a fresh empty caldav database). Same for addressbook clients (empty contacts).
So I searched and read several post that helped me greatly :
https://discussions.apple.com/thread/3890595
https://discussions.apple.com/message/23581552
BUT, what is different in mavericks, is this :
The postgres cluster that hosts the caldav data seems to have move (again!), and this is by exploring several config files that I figured which was the right socket to use to connect to the good postgres cluster.
The clues were in the file : /Applications/Server.app/Contents/ServerRoot/private/etc/caldavd/caldavd-apple.p list
Where I found the precious parameter (under the Postgres section) :
<key>SocketDirectory</key>
<string>/var/run/caldavd/PostgresSocket</string>
What I also figured is that the user account to use for connecting to this postgres cluster is caldav, and not _postgres.
So here are basically the steps I had to take to reinstall my old database.
Step #0 :
First, you need to locate the dump of the old postgres database, I found that the migration process seemed to make a dump inside :
This method ONLY WORKS if you have the following file :
/Library/Server/Migrated/Library/Server/PostgreSQL/Backup/dumpall.psql.gz
If you have that file, you can extract it with the command :
gunzip /Library/Server/Migrated/Library/Server/PostgreSQL/Backup/dumpall.psql.gz
For the rest of the steps I assume this file is named /path/to/your/dump.psql
I think (but I'm not sure of it) that THIS precise dump is different than what you would get inside a manual dump, meaning that in this dump you have all the databases of the cluster. Again I'm not sure, but that's what I think since there are CREATE DATABASE instructions inside it).
If you don't have that file, perhaps you made a dump by hand.
If that's the case, I think that before Step #3 you will have to create an empty caldav database, BUT, I'm not sure the command "calendarserver_bootstrap_database -v" mentionned here will create the caldav in the right cluster (read above). Perhaps we could figured out together if that's your case.
Step #1 : stop the services
sudo serveradmin stop addressbook
sudo serveradmin stop calendar
Step #2 : drop the caldav database
sudo dropdb -h /var/run/caldavd/PostgresSocket -U caldav caldav
If you get this error message :
dropdb: database removal failed: ERROR: database "caldav" is being accessed by other users
DETAIL: There is 1 other session using the database.
then go to Step #2a, otherwise, go straight to Step #3
Step #2a : only if Step 2 didn't work, see above ! (taken from here)
# Connect to the postgres database
psql -h /var/run/caldavd/PostgresSocket -U caldav
# Terminate the current sessions
postgres=> select pg_terminate_backend(procpid) from pg_stat_activity where datname='caldav';
# Exit postgres
postgres=> \q
Step #3 : if your database dump is not from /Library/Server/Migrated/Library/Server/PostgreSQL/Backup/dumpall.psql.gz, then PERHAPS you will have to create manually an empty caldav database (see Step #0)
Step #4 : create the new database from the dump
sudo psql -h /var/run/caldavd/PostgresSocket -U caldav -f </path/to/your/dump.psql> caldav
A lot of things should be displayed, and I eventually got an error at the end :
psql:DataDump.sql:49844: \connect: FATAL: database "collab" does not exist
But in my case that didn't affect my migration.
Step #5 : restart services
sudo serveradmin start calendar
sudo serveradmin start addressbook
I hope that helps you.
Cheers

iCloud adds a new (additional) Address book to Outlook, it contains the iCloud contacts, if the iCloud contacts and the Outlook contacts are the same there will be duplicates:
Look in one Contact Folder only
Delete the Outlook Contacts (you can't delete the whole folder, only the contents
These are your choices.

Integrating calendar server with messaging server

hi all,
i have installed messaging server but am not able to bind messaging server and calendar server together.the calendar server does not start with ./start-cal command.i am attaching the ics.conf file below.
!!!! ics.conf Parameter Specification: You can have three kinds of records
!!!! #1) Uncommented Key: Starts with alphabet [a-z] and in the form a="b"
!!!! #2) Commented key: Start with !!<alphabet> OR !![a-z]
!!!! And in the form !!a="b" (min 7 chars length)
!!!! #3) Commented Lines: Starts with ! But not with !![a-z]
!!!! #4) Records other than types #1, #2, #3 will be ignored or won't be
!!!! processed e.g. blank lines, lines starting with non-alphabets etc..
!!!! All these parameters are SINGLE valued
!!!! Imaginary Domain Names siroe.com, varrius.com, florizel.com, and sesta.com
!!!! are used in the examples below.
! Description sent with insufficient disk space messages.
alarm.diskstat.msgalarmdescription = "percentage calendar partition diskspace available"
! Number of seconds between monitoring disk space.
alarm.diskstat.msgalarmstatinterval = "3600"
! Percentage of available disk space that triggers sending a warning message.
alarm.diskstat.msgalarmthreshold = "10"
! Whether alarm.diskavail.msgalarmthreshold is above or below percentage. -1 is below and 1 would be above.
alarm.diskstat.msgalarmthresholddirection = "-1"
! Number of hours between sending warning messages about insufficient disk space sent out.
alarm.diskstat.msgalarmwarninginterval = "24"
! Specifies the SMTP host for server alarms.
alarm.msgalarmnoticehost = "sonlinux.bg2iop.com"
! Specifies the SMTP port for server alarms.
alarm.msgalarmnoticeport = "25"
! Who are server alarms sent to?
alarm.msgalarmnoticercpt = "[email protected]"
! When server alarms are sent, who is the sender?
alarm.msgalarmnoticesender = "[email protected]"
! Default is "From: %s\nTo: %s\nSubject: ALARM: %s of \"%s\" is %u\n\n%s\n"
alarm.msgalarmnoticetemplate = ""
! Description sent with no service response messages.
alarm.responsestat.msgalarmdescription = "calendar service not responding"
! Number of seconds between monitoring services.
alarm.responsestat.msgalarmstatinterval = "3600"
! Only trigger sending a warning message if no service response.
alarm.responsestat.msgalarmthreshold = "100"
! Whether alarm.responsestat.msgalarmthreshold is above or below percentage. -1 is below and 1 would be above.
alarm.responsestat.msgalarmthresholddirection = "-1"
! Number of hours between sending warning messages about no service response sent out.
alarm.responsestat.msgalarmwarninginterval = "24"
! Enable (yes) or Disable (no) browser cache for performance reasons.
browser.cache.enable = "no"
! Retry time in seconds after a recoverable alarm delivery error.
caldb.berkeleydb.alarmretrytime = "300"
caldb.berkeleydb.archive.enable = "0"
! Interval between hotbackup or archivebackup in seconds
caldb.berkeleydb.archive.interval = "120"
! Maximum number of days of archivebackup
caldb.berkeleydb.archive.maxdays = "6"
! Minimum number of days of archivebackup
caldb.berkeleydb.archive.mindays = "3"
caldb.berkeleydb.archive.path = "/var/opt/sun/calendar/csdb/archive"
! Percentage threshold of allowable disk space usage
caldb.berkeleydb.archive.threshold = "70"
! Seconds between checkpointing.
caldb.berkeleydb.checkpointinterval = "60"
! Remove checkpoint files after synchronized? (yes/no)
caldb.berkeleydb.circularlogging = "yes"
! Milliseconds between checking database deadlocks.
caldb.berkeleydb.deadlockinterval = "100"
! Enable more advanced notifications - replyevent/refreshevent/replytodo/refreshtodo considered
! as advanced topics. By default, all these notifications will be published to
! modifyevent and modifytodo respectively. If it is enabled modifyevent will get only
! organizer updates to components and attendees replies and the refreshes triggered by replies
! to components will be published to the respective topics. (yes/no)
caldb.berkeleydb.ensmsg.advancedtopics = "no"
! Create an ENS message when a calendar is created? (yes/no)
caldb.berkeleydb.ensmsg.createcal = "no"
! Create an ENS message when an event is created? (yes/no)
caldb.berkeleydb.ensmsg.createevent = "no"
! Create an ENS message when a task is created? (yes/no)
caldb.berkeleydb.ensmsg.createtodo = "no"
! Create an ENS message when a calendar is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deletecal = "no"
! Create an ENS message when an event is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deleteevent = "no"
! Create an ENS message when a task is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deletetodo = "no"
! Create an ENS message when a calendar is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifycal = "no"
! Create an ENS message when an event is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifyevent = "no"
! Create an ENS message when a task is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifytodo = "no"
! Initial size of the in-memory Event Notification Server message queue. This queue stores all ENS messages other than alarm reminders.
caldb.berkeleydb.ensmsg.qsize = "10000"
! Create an ENS message when an event is refreshed? (yes/no)
caldb.berkeleydb.ensmsg.refreshevent = "no"
! Create an ENS message when a task is refreshed? (yes/no)
caldb.berkeleydb.ensmsg.refreshtodo = "no"
! Create an ENS message when an event is replied? (yes/no)
caldb.berkeleydb.ensmsg.replyevent = "no"
! Create an ENS message when a task is replied? (yes/no)
caldb.berkeleydb.ensmsg.replytodo = "no"
! Create an ENS message when a scheduling request written to the calendar is deleted? (yes/no)
caldb.berkeleydb.ensmsg.schedreq = "no"
! Physical path location of database event, task, and alarm files.
caldb.berkeleydb.homedir.path = "/var/opt/sun/calendar/csdb"
caldb.berkeleydb.hotbackup.enable = "0"
! Maximum number of days of hotbackup
caldb.berkeleydb.hotbackup.maxdays = "6"
! Path for archivebackup
!caldb.berkeleydb.archive.path
! Path for hobackup
!caldb.berkeleydb.hotbackup.path
! Enable/disable of archivebackup feature, yes/no
!caldb.berkeleydb.archive.enable
! Enable/disable of hotbackup feature, yes/no
!caldb.berkeleydb.hotbackup.enable
! Minimum number of days of hotbackup
caldb.berkeleydb.hotbackup.mindays = "3"
caldb.berkeleydb.hotbackup.path = "/var/opt/sun/calendar/csdb/hotbackup"
! Percentage threshold of allowable disk space usage
caldb.berkeleydb.hotbackup.threshold = "70"
! Max megabytes of checkpoint file.
caldb.berkeleydb.logfilesizemb = "10"
! Max threads of database.
caldb.berkeleydb.maxthreads = "10000"
! Megabytes of shared memory.
caldb.berkeleydb.mempoolsizemb = "4"
! Time before which to purge deletelog
caldb.berkeleydb.purge.deletelog.beforetime = "86400"
! Time interval between auto purge of deletelog
caldb.berkeleydb.purge.deletelog.interval = "86400"
! If "yes", open the database in readonly mode
caldb.berkeleydb.readonly = "no"
! Email of calendar database administrator.
caldb.calmaster = "[email protected]"
! Seconds between checkpointing.
caldb.cld.cache.checkpointinterval = "60"
! Remove checkpoint files after synchronized? (yes/no)
caldb.cld.cache.circularlogging = "yes"
!service.calendarsearch.ldap.primaryownersearchfilter = "(&(|(uid=*%s*)(cn=*%s*))(objectclass=icsCalendarUser))"
! Enables ("yes") or disables ("no") cld db cache
caldb.cld.cache.enable = "yes"
! Physical path location of cache database
caldb.cld.cache.homedir.path = "/var/opt/sun/calendar/csdb/cld_cache"
! Max megabytes of checkpoint file.
caldb.cld.cache.logfilesizemb = "10"
! Max threads of database.
caldb.cld.cache.maxthreads = "1000"
! Megabytes of shared memory.
caldb.cld.cache.mempoolsizemb = "4"
! Type of Calendar Lookup Database plugin to use ("local" "algorithmic" or "directory").
caldb.cld.type = "local"
! Count data base statistics? (yes/no)
caldb.counters = "yes"
! Maximum number of calendars with counters.
caldb.counters.maxinstances = "100"
! Maximum number of backlogged requests before the server obtains a new network connection.
caldb.dwp.connthreshold = "1"
! Initial number of connections for DWP client to make to each DWP host.
caldb.dwp.initconns = "2"
! Initial number of threads for handling DWP requests.
caldb.dwp.initthreads = "2"
! Maximum number of connections allowed to a DWP server.
caldb.dwp.maxcons = "1000"
! Maximum number of threads to service HTTP requests in csdwpd.
caldb.dwp.maxthreads = "1000"
! Specifies if the server performs MD5 hash checking of all DWP requests.
caldb.dwp.md5 = "n"
! IP address of a specified DWP server.
!!caldb.dwp.server.[hostname.xyz.com].ip = "a.b.c.d"
! Port number of a specified DWP server (Algorithmic CLD only).
!!caldb.dwp.server.[hostname.xyz.com].port = "59779"
! Default DWP server (LDAP CLD only), used if user's icsDWPhost value does not exist.
!!caldb.dwp.server.default = "hostname.xyz.com"
! Stack size for DWP threads.
caldb.dwp.stacksize = "65536"
! Process alarms on the alarm queue -- that is, store them in the alarm queue when an event/todo is saved
caldb.serveralarms = "1"
! Timeout for contacting ENS. If no response, we assume ENS is not running
caldb.serveralarms.acktimeout = "30"
! Dispatch -- that is, enable alarm dispatching. When an alarm trigger time arrives send out email or ENS message.
caldb.serveralarms.dispatch = "yes"
! Enable binary alarms. Used by csnotifyd and csadmind. (default: yes)
!caldb.serveralarms.binary.enable = "yes"
! Binary alarm url. Used by csnotifyd and csadmind. (default: enp:///ics/alarm)
!caldb.serveralarms.binary.url = "enp:///ics/alarm"
! Custom alarm url. Use this to get xml or calendar mime type contents
!caldb.serveralarms.url = "enp:///ics/customalarm"
! Custom alarm url contenttype. (text/xml or text/calendar)
!caldb.serveralarms.contenttype = "text/calendar"
! Dispatch type for Calendar Server alarms ("ens" o "smtp").
caldb.serveralarms.dispatchtype = "ens"
! Initial number of threads for the Event Notification Server.
caldb.serveralarms.initthreads = "0"
! Specifies how long, in seconds, the server will continue to try reconnecting to ENS before giving up. -1 means forever.
caldb.serveralarms.maxretrytime = "-1"
! Maximum number of threads for the Event Notification Server
caldb.serveralarms.maxthreads = "10"
! Time to sleep, in seconds, after a timeout connecting to ens before making another attempt to connect to ens
caldb.serveralarms.retryinterval = "5"
! Stack frame size for Event Notification Server threads.
caldb.serveralarms.stacksize = "65536"
! Total time, in seconds, to retry connecting to ENS on startup.
caldb.serveralarms.startupretrytime = "30"
! Send alarms to this SMTP host.
caldb.smtphost = "sonlinux.bg2iop.com"
! Specifies the directory in cal/bin/config containing the localized version of the files used to format email notifications.
caldb.smtpmsgfmtdir = "en"
! Specifies the SMTP port.
caldb.smtpport = "25"
! Event reminder format file.
calmail.eventreminder.fname = "mail_eventreminder.fmt"
! Event cancellation format file.
calmail.imipeventcancel.fname = "mail_eventcancel.fmt"
! Event CANCEL NOTIFICATION message format file
calmail.imipeventcancelnotification.fname = "mail_eventcancelnotification.fmt"
calmail.imipeventcancelnotificationrecur.fname = "mail_eventcancelnotificationrecur.fmt"
! Event NOTIFICATION message format file
calmail.imipeventnotification.fname = "mail_eventnotification.fmt"
calmail.imipeventnotificationrecur.fname = "mail_eventnotificationrecur.fmt"
! Event notification format file.
calmail.imipeventpublish.fname = "mail_eventpublish.fmt"
! Event REPLY message format file
calmail.imipeventreply.fname = "mail_eventreply.fmt"
! Event REQUEST message format file
calmail.imipeventrequest.fname = "mail_eventrequest.fmt"
! Task cancellation format file.
calmail.imiptodocancel.fname = "mail_todocancel.fmt"
! Task notification format file
calmail.imiptodopublish.fname = "mail_todopublish.fmt"
! Task REPLY message format file
calmail.imiptodoreply.fname = "mail_todoreply.fmt"
! Task REQUEST Message format file
calmail.imiptodorequest.fname = "mail_todorequest.fmt"
! Task reminder format file.
calmail.todoreminder.fname = "mail_todoreminder.fmt"
! Anonymous login CALID.
calstore.anonymous.calid = "anonymous"
! Does server support only two privacy types for components - PRIVATE (acts as confidential) /PUBLIC instead of PRIVATE/CONFIDENTIAL/PUBLIC
calstore.binaryprivacy.mode = "no"
! When creating new calendar of user, whether to lowercase calendar or not
! Also, when looking up calendar, whether to lowercase or not
calstore.calendar.create.lowercase = "n"
! For a newly created calendar, set the ACL to this
calstore.calendar.default.acl = "@@o^a^r^g;@@o^c^wdeic^g;@^a^fs^g;@^c^^g;@^p^r^g"
! Definition of the "owner" acl
calstore.calendar.owner.acl = "@@o^a^rsf^g;@@o^c^wdeic^g"
! Timezone ID used when importing files.
calstore.default.timezoneID = "America/New_York"
! Whether to filtering the private/confidential events on queries to server
calstore.filterprivateevents = "yes"
! Is user's default calendar included in user's freebusy-calendar-list or not
calstore.freebusy.include.defaultcalendar = "yes"
! Can user's default calendar be removed from user's freebusy-calendar-list or not
calstore.freebusy.remove.defaultcalendar = "no"
! Maximum number attendees to be allowed in a LDAP group when expanding event. Value of 0 means expand group entirely.
calstore.group.attendee.maxsize = "0"
! Maximum number of events created by recurrence
calstore.recurrence.bound = "60"
! Is user's default calendar included in user's subscribed-calendar-list or not
calstore.subscribed.include.defaultcalendar = "yes"
! Can user's default calendar be removed from user's subscribed-calendar-list or not
calstore.subscribed.remove.defaultcalendar = "no"
! For attendee calendar lookup, when encountering string that looks like (jdoe OR jdoe:tv), treat string as a userid (uid) when looking-up in Directory.
! Value can be {uid | cn | gid | res | mailto | cap}
calstore.unqualifiedattendee.fmt1.type = "uid"
! For attendee calendar lookup, when encountering string that looks like ([email protected]) (has @ sign), treat string as a mailto address when looking-up in Directory
! Value can be {uid | cn | gid | res | mailto | cap}
calstore.unqualifiedattendee.fmt2.type = "mailto"
! For attendee calendar lookup, when encountering string that looks like (John Doe) (has space), treat string as a common name (cn) when looking-up in Directory
! Value can be {uid | cn | gid | res | cap}
calstore.unqualifiedattendee.fmt3.type = "cn"
! Maximum number of results returned from LDAP lookup from user search. Value of 0 means no limit.
calstore.userlookup.maxsize = "200"
! Is Server in Virtual Domain mode or not (this affects 5.0p2 only)
calstore.virtualdomain.mode = "n"
! Enable (y) or disable (n) Access Control plugin.
csapi.plugin.accesscontrol = "n"
! Load only the plugin specified in csapi.plugin.authentication.name? (y/n)
csapi.plugin.authentication = "n"
! Enable (y) or disable (n) Calendar Lookup Database plugins.
csapi.plugin.calendarlookup = "n"
! Specifies the name of a specific Calendar Lookup Database plugin to load. If "*", load the plugins.
csapi.plugin.calendarlookup.name = "*"
! Load only the plugin specified in csapi.plugin.database.name or if not specified, load all database plugins in alphabetical order.
csapi.plugin.database = "y"
! Only load this specific plugin if csapi.plugin.loadall is no and csapi.plugin.database is yes.
csapi.plugin.database.name = "cs_caldb_berkeley10"
! Load only the plugin specified in csapi.plugin.datatranslator.name? (y/n)
csapi.plugin.datatranslator = "y"
! Only load this specific plugin if csapi.plugin.loadall is no and csapi.plugin.data translator is yes.
csapi.plugin.datatranslator.name = "cs_datatranslatorcsv10"
! Enable (y) or disable (n) database-to-output format plugins.
csapi.plugin.dbtranslator = "y"
! If "*", then load all the database-to-output format plugins. If a library name, only load that plugin. csapi.plugin.dbtranslator must be set to "yes" to load plugin
csapi.plugin.dbtranslator.name = "*"
! Load all plugins found in the plugins directory? (y/n)
csapi.plugin.loadall = "n"
! Load only the plugin specified in csapi.plugin.userprefs.name? (y/n)
csapi.plugin.userprefs = "n"
! Load only this plugin if csapi.plugin.loadall is no and csapi.plugin.userprefs is yes.
!!csapi.plugin.userprefs.name = "plugin_name"
! Enable the RSA Cypher Encryption Family Services for SSL
!!encryption.rsa.nssslactivation = "on"
! Define the Certificate name for the RSA Cypher Encryption Family
!!encryption.rsa.nssslpersonalityssl = "SampleSSLServerCert"
! Define the location of the RSA Cypher Encryption Family token
!!encryption.rsa.nsssltoken = "internal"
! Specifies if the auto refresh feature is enabled or disbaled. (yes/no)
gse.autorefreshreplystatus = "yes"
! Specifies (in seconds) how long to wait before the server scans the schedule queue for incoming jobs.
gse.belowthresholdtimeout = "3"
! Maximum number of concurrent threads the server uses to process the schedule queue.
gse.maxthreads = "10"
! Maximum length of time the server will retry to complete a group scheduling job.
gse.retryexpiredinterval = "86400"
! Specifies (in seconds) how often the server will retry a previous failing job.
gse.retryinterval = "300"
! Maximum stack size (in bytes) of a group scheduling thread
gse.stacksize = "65535"
! global flags to control notification for invitation and cancellation.
! Enable (yes) Disable (no), default is enabled. Notification will be sent.
ine.cancellation.enable = "yes"
ine.invitation.enable = "yes"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.basedir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.betamajorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.betaminorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.caldbtype = "local"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csinstalldir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodbasedir.path = "/opt/sun/calendar"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodclassesdir.path = "/opt/sun/calendar/classes"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csproddir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodjavadir.path = "???"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodlibdir.path = "/opt/sun/calendar/lib"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodtoolsdir.path = "/opt/sun/calendar/tools"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csproduicustdir.path = "/opt/sun/calendar/uicust"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.fullversion = "6.0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.majorversion = "6"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.minorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osarch = "i386"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osname = "linux"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.ostype = "unix"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osversion = "2.6.9-22.el"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.patchversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.serveruidpassword = "icsuser"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.startupafterinstall = "no"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.startupatboot = "no"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.userauthtype = "ldap"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.userprefstype = "ldap"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.version = "6.0"
! Base DN for LDAP authentication. If not specified, use local.ugldapbasedn.
local.authldapbasedn = "o=bg2iop.com, dc=bg2iop,dc=com"
! Bind credentials (password) for user specified in local.authldapbinddn.
local.authldapbindcred = "admin123"
! DN used to bind to LDAP authentication host to search for user's dn.
local.authldapbinddn = "cn=Directory Manager"

Hi Venigalla,
You can implement a federated portal network (FPN) using the SAP NetWeaver platform to share content between portals.
A federated portal network allows organizations with distributed portal installations, both SAP and non-SAP, to provide a single portal access point per user to portal information, services and applications distributed on portals in the network.
WSRP-based application sharing (FPN Mode used for for integrating content between SAP and Non SAP portals) :-
--> Content administrators on a SAP NetWeaver consumer portal can integrate WSRP portlets (i.e. iViews) from remote non-SAP portals into SAP NetWeaver Portal.
--> SAP NetWeaver developers can create WSRP compliant iViews that can be consumed in non-SAP consumer portals.
You may kindly go through the below link, should be helpful:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/23fb36cad10d23e10000000a1553f7/frameset.htm
Regards,
Anagha

Cluster Installation of Calendar Server-RedHat3 ES -JES2005Q4-Fatal error

Hello,
I've installed messaging server and calendar server in cluster mode.
Messaging server works well either calendar on the first node.
On the second node Messaging server works (after shutting down the first node) but I didn't manage to start calendar server.
I don't use Sun Cluster Agent.
I've installed calendar server on the SAN (binaries and config files)
When I start it(on the second node) I have the following error message:
Restarting calendar services
Stopping all calendar services
Starting all calendar services
enpd is started
csnotifyd is started
Fatal error 70: Cannot start Alarm Dispatch thread
csadmind is not started
Calendar service(s) not started
PS: I've read this to help me
http://docs.sun.com/app/docs/doc/819-2433/6n4nlfjmo?q=calendar+server+cluster&a=view
PS2: I've tried to modify the ics.conf file with this but without any success
http://docs.sun.com/source/817-5699/index.html#wp75517
If anybody have a suggestion !
Thanks for your help and sorry for my english
Message was edited by:
aduneo92
Message was edited by:
aduneo92
Message was edited by:
aduneo92

[SOLVED]
Just need a full reinstallation (as usuall ...)

Calendar Server/Convergence Issues

Hi,
I recently managed to install Comm Suite 7 on Solaris x86_64 under a sparse zone; I'm really new to this.
Calendar Server (CALDAV) 7u1 (7.1-1.11)
Convergence 2 (2.0-0.06)
running glassfish 2.2.1 (open source edition)
Within convergence I have 2 issues:
- Users can't click the 'New Event' button under the calendar view. Nothing appears, however if you navigate away from the page the browser warns that there are x forms left open for the x amount I clicked the new event button. Log files are not really telling me much
This issue only occurs on the default user calendar. When users create a new calendar and click the new event button, it works as expected.
- Not all timezones are listed; I lack all the European ones although that are present in the timezoneids.txt file under the deployment
Anyone encountered this or could point our where to start looking? I've been poring over the massive documentation set on the wiki and following some troubleshooting guides but nothing really came out.

Update:
This issue seems to be really down to timezones; I moved the file aside and created a new one just containing the one I want (Europe/Paris).
After that I switched all timezones (column wcaptzid) in the DB table CalProp to Europe/Paris and the convergence calendar behaves 'normal'
Still would be very interested in finding out how to look further into this and if possible work with more timezones than Europe/Paris :)

I am upgrading to Calendar Server 4.0 on NT with more than 9 nodes (or I already have) and my server won't start

I am upgrading to Calendar Server 4.0 on NT with more than 9 nodes
(or I already have) and my server won't start.
<P>
The steps are the same whether you have already upgraded or are about to.
<P>
Calendar Server 4.0 on the Windows NT platform can only support up to nine
nodes on one server, while 3.51 supported up to 14. If you have a Calendar
Server 3.51 with more than 9 nodes that you want to upgrade to Calendar Server
4.0, Netscape recommends that you migrate the extra nodes to another Calendar
Server 3.51 on another Windows NT system. To accomplish this:
<OL>
<LI>Install Calendar Server on another Windows NT machine and configure it to
use the same directory server as your current Calendar Server.
<LI>Stop and backup your current Calendar Server.
<LI>Individually zip up the node directories you want to move to the new
server. (drive:\unsers\unison\db\Nx
where "x" is the number of the node you want to use.)
<LI>Stop the new Calendar Server.
<LI>Unzip the files into the new Calendar Server in the same place as they
were on the old server.
<LI>Edit the unison.ini
file on the new server to add the nodes you have just migrated.
<LI>Edit the unison.ini
file on the old server to remove the nodes you have moved to the new server.
<LI>Edit the nodes.ini
file on the old server to remove the nodes you just moved and then add them
with the new hostname. Keep in mind that you will only be able to modify the
node network from the old host.
<LI>Run unidbfix -export
on both servers for all nodes.
<LI>Edit the remotenodes.ini
file on both servers to reflect your node topology.
<LI>Run unidbfix -import
to import the changes into the node databases.
<LI>Run unidbfix -c,
then -f,
then -c
again on both servers for all the nodes.
<LI>If you don't get any errors, run uninode -test all
to test if your nodes connections are set properly. If they are not, <B>do not</B>
start either of the servers; instead, fix the errors and try again.
<LI>Start both servers.
<LI>Log in and check to see if you can see people on remote nodes.
<LI>Notify the users on the moved nodes of their new calendar host.
<LI>If you did this in preparation of an upgrade, you can now run the upgrade to
4.0 since both servers contain fewer than 9 nodes.
</OL>

Use Disk Utility whihc is in the Utilities Folder.
Select your Boot Disk on the left.
Select Verify Permissions
If any errors the do Reapir permissions.
You might have to repeat the process.
see this:
Steve

I have updated to lion. Set up an iCloud so contacts and calendar are shared between iMac iPhone 4s and iPad 1. But iTunes is telling me to update the software on the iPad and iPhone, but it just gets stuck contacting the software server. What should I do

I have updated my iMac to lion so I can use iCloud to share contacts and calendar between iPhone 4s and iPads 1. Somehow it seems to have worked although still not sure how to move stuff in and out of iCloud. iTunes is telling me to update the software on the phone and iPad. When I try to do this it just gets stuck with a box saying connecting to software update server. This has never happened before. I cannot update or restore either the phone or the iPad in iTunes although I have synced the info. What should I do?

Something went wrong with the update, this can and does happen with every version of iOS.
There is nothing wrong with the update.
Simply restore the device via iTunes on the computer.
If iTunes is stating it will take hours to update, that indicates an extremely slow Internet connection and is likely the reason the OTA update failed.

Contacts and calendar items disappear when exchange server is off

Hi All
I've been having this problem for a few weeks now and it's most frustrating. My iphone is setup to sync over the air to our corporate exchange server. It seems that when the server is down for repair/patching ALL my contacts and calendar items disappear from my iphone. This doesn't seem to happen if the phone is out of signal?
I know that I can sync directly with Outlook, however this would then mean that the phone is only updated when synced with my laptop at work. If I sync both over the air AND with Outlook, I get duplicates of everything in my calendar.
I'm not restoring my iphone to factory defaults to get rid of the duplicates and go back to over the air sync only.
Does anyone have any ideas on how I can get calendar and contacts to work "offline" when the exchange server is down?
Main PC is running Windows 7 and exchange is 2007. This problem is only recent, I think in the last month of two. Nothing has changed other than the last few firmware updates from Apple.

hi, cheers for the info. That would make sense, however how come when I'm out of signal and not connected to wifi, the data doesn't also disappear as that too would render the server "unavailable".
Is there a way to make the iphone keep a copy of the data much the same as "offline mode" in Outlook where you can still browse your email, calendar and contacts when the server is offline, and it picks up where it left off when the server is available again?
I appreciate this may not be a "problem" as such, but is frustrating as all my contacts and calendar live in Outlook and I can't function without them
Message was edited by: spongmonkey

Convergence and Calendar Server 6.3

Similar Messages

Maybe you are looking for