Convergent Charging how to rate through the BART-API

Hallo,
I'm new in the SAP Business and I don't know how to say the BART-Server that he should rate the CDRs?
The Connection can be set up by the CDRServiceClient. This Client has methods like
- startAcquisitionSession(...)
- acquireCDR(...)
- stopAcquisitionSession(...)
With this methodes the CDRs can be acquired in CC.
How can I rate the CDRs in CC after the acquisition?
Thanks
E.F.

Ciao Matteo,
have you already done it?
I also haven't a mediation system in my landscape...
We are looking for a way to test SAP CC Diameter server with a sort of tools to simulate diameters clients, but still without success. If you google it, you'll find out a list of tools. Seagull is one of then.
I was expecting to POST under HTTP to the SAP CC diameter server, as well as we do when posting to the updater port in Convergent Charging (usually when provisoning, etc).
But diameter is a different protocol, and I'm not sure how it is used by the mediations system in order to comunicate with the diameter server.
Any information will be usefful.
Regards,
Leonardo Gazella
skp: leogazella

Similar Messages

  • My ipad is barely charging - how can i tell the difference between iphone 6 charger and ipad

    my ipad is barely charging - how can i tell the difference between iphone 6 charger and ipad

    See the following page for info on all of Apple's chargers (you'll need to scroll down a bit on that page):
    Charge the battery in your iPad - Apple Support

  • How do I access the remote(requesting) clients IP address through the Portal API?

    How can I access the remote(requesting) clients IP address through the Portal API?
    On our 4.5 - IIS system, we can acces it using the Request.ServerVariables("Remote_Addr") in the ASP pages.
    We are deploying 5.0 on Java Portal and would like to be able to do this through the Portal's API so I can call it in one of our custom login Activity space or control etc.
    I have looked documentation for the HTTPServletRequest object. It seems like we should be able to access it through one of the methods getRemoteAddr if we can get a handle to HTTPServletRequest object through the Plumtree's framework.
    I think the XPRequest object encapsulates the HTTPServletRequest but I didn't see getRemoteAddr method listed in the Javadocs.
    Is there a way to access the client's IP address through the Plumtree's framework?
    I need to do this so we know the location of the user and in our business case we have fixed IP adresss which let us identify which location is user accessign the system from. We can't do this through preferences or profile because we have to use generic userid for the specifc group of users.
    Any help on this would be appreciated.
    Thanks.
    Vanita

    Hi, Vanita. For now, you can use
    stringsClientIP = HttpContext.Current.Request.ServerVariables["REMOTE_ADDR"].ToString();
    Hope that helps!
    Sarah

  • Data access through the OLAP API

    We have created a number of Cubes from the AWM, and access the cubes from a web based application through the OLAP API. The cubes have both base measures and custom measures. Custom Measures are computed by creating the source object for given Formula Expression. The application works fine for a single user, but when a same cube is accessed concurrently by multiple users, we get the TransactionalObjectInvalidException when we call the MdmMeasure.getSource() function for the custom measures.
    Since each individual users have individual contexts and the static methods are properly sunchronized, we havent not been able to trace this error so far. The exception is thrown by oracle.olapi.data.source.ImmutableDefinition.checkValidity() API method. Error Trace is:
    oracle.olapi.transaction.TransactionalObjectInvalidException
    at oracle.olapi.data.source.ImmutableDefinition.checkValidity(Loracle.olapi.transaction.Transaction;)V(ImmutableDefinition.java:40)
    at oracle.olapi.data.source.SourceDefinition.getCurrentTransaction()Loracle.olapi.transaction.Transaction;(SourceDefinition.java:206)
    at oracle.olapi.data.source.SourceDefinition.getSource()Loracle.olapi.data.source.Source;(SourceDefinition.java:320)
    at oracle.olapi.metadata.mdm.MdmSource.getSource()Loracle.olapi.data.source.Source;(MdmSource.java:141)
    Any help will be highly appreciated.
    --Saajan                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    We have created a number of Cubes from the AWM, and access the cubes from a web based application through the OLAP API. The cubes have both base measures and custom measures. Custom Measures are computed by creating the source object for given Formula Expression. The application works fine for a single user, but when a same cube is accessed concurrently by multiple users, we get the TransactionalObjectInvalidException when we call the MdmMeasure.getSource() function for the custom measures.
    Since each individual users have individual contexts and the static methods are properly sunchronized, we havent not been able to trace this error so far. The exception is thrown by oracle.olapi.data.source.ImmutableDefinition.checkValidity() API method. Error Trace is:
    oracle.olapi.transaction.TransactionalObjectInvalidException
    at oracle.olapi.data.source.ImmutableDefinition.checkValidity(Loracle.olapi.transaction.Transaction;)V(ImmutableDefinition.java:40)
    at oracle.olapi.data.source.SourceDefinition.getCurrentTransaction()Loracle.olapi.transaction.Transaction;(SourceDefinition.java:206)
    at oracle.olapi.data.source.SourceDefinition.getSource()Loracle.olapi.data.source.Source;(SourceDefinition.java:320)
    at oracle.olapi.metadata.mdm.MdmSource.getSource()Loracle.olapi.data.source.Source;(MdmSource.java:141)
    Any help will be highly appreciated.
    --Saajan                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • My battery drained in my iPad 4S and now it won't charge and just cycles through the Apple logo and battery low screens. I can't turn the machine off or on

    My battery drained on my iPad 4s and now I can't turn it off or on. It just continues to cycle through the Apple Logo scree for about 10 seconds and than goes blank. Any thoughts would be appreciated

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
     Cheers, Tom

  • Air blowing out of my macbook pro and battery not showing when charging has an x through the gauge what's going on?

    Hey, I noticed just today after not using my macbook for a couple days that it's blowing air out of the back part of my macbook and It's col air and the fan is loud. Also, when I plug in to charge my macbook it has an x through the battery gauge. Anyone know what this could be? I just had my Macbook restored by Apple itself not but a month ago. HELP PLEASE!!!

    Try resetting the  SMC http://support.apple.com/kb/ht3964

  • How to access an action's Due Date through the GP API

    I'm new to the GP API, and I would like to know how can I get/set an action's due date and notifications at runtime.
    Is it possible to create new actions and attach them to a process?
    Thanks in advance

    Thanks for your reply. You know? I already looked at those documents before, but I couldn't find the right API to acomplish my requirement.
    What I've found over and over is how to retrieve the notifications belonging to the process. But these are not the notifications that I need. Like the post's title reads, I need the <i>Activities/Actions</i> notifications.
    I read there's a method in the <i>NotificationManager</i> API to do so, but so far I've only manage to get a <i>NullPointerException</i>
    Here's the code:
    String processId = executionContext.getProcessId();
    String activityId = executionContext.getTaskId();
    IGPNotificationInstance notificationInstance =
            ntfm.retrieveNotification(
                    processId, activityId, notifId);
    String idNotificacion = "";
    if (notificationInstance != null) {
        deadline = notificationInstance.getDeadline();
    The notification ID comes from watching the faulty notifications in the queue manager (so it's hard-coded)
    It doesn't matter what property/method I try to access from the <i>notificationInstance </i>object. I get a <i>NullPointerException</i>.

  • Update PO item rate through interface or API

    Hi
    I have a scenario in which PO is created from PR through Autocreate but items rates need to be populated through interface or API. Please any doc or sample example on how to do that???
    I havent done interfacing or used api a lot before i was just on reporting side. I will be highly thankfull if Detailed Steps provided.
    regards

    Hi Goutam,
    Check with the following exits:
    MB_CF001  Customer Function Exit in the Case of Updating a Mat. Doc.
    MBCF0002  Customer function exit: Segment text in material doc. item
    MBCF0005  Material document item for goods receipt/issue slip
    Regards,
    Tutun

  • How do you get the Java API onto Computer

    Hi guys,
    Well I want to practice Java at home, but instead have been staying up late at night at the University's Computer Lab.
    I have downloaded the Forte for Java, but I don't need all the Graphics classes since my programming class is centered on Programming in the UNIX environment. Not too long ago, I purchased SuSE Linux which had the Java Language and the compiler. I successfully managed to dual boot an old computer with it. It was easy because SuSe Partitioned the drive for you if it had a WIN32 filesystem.
    My parents bought me a laptop and it came with Windows XP. I have ever since wanted to Dual Boot this system with Suse Linux, but can't because 1.) SuSe Linux doesn't partition the drive because Windows XP resides on a NTFS filesystem. 2.) I can't risk doing it myself because I have a lot of critcal information.
    It would be really neat to work in Linux to program, because then I could do some serious homework as well practice. Forte for Java I am not really knowledgeable of it. I can't get the editor to work and it doesn't feel like I am in UNIX at all which defeats the purpose of taking trying to succeed in this programming class.
    Could somebody help me with my woes on how to deal with these matters. How can I get SuSe Linux on my XP computer safely and if it can be done how do I use the Forte for Java.
    Thanks for all your support,
    mileinfive-serious about programming

    The first question: http://sdb.suse.de/en/sdb/html/dstark_linux_xp.html
    F4J will be the same on both operating systems.. what actually is your question regarding it?

  • How do I use the Kuler API?

    For more information on the Kuler APIs and guidelines for usage and application naming, see the Kuler
    Update (5/30/13): We're working to rebuild the Kuler API to offer more robust capababilities.  Until then, we're no longer issuing new API keys.  If you already have a key and are using the API, your service will not be interupted (your key will continue to work).

    Neha, thanks for your response.
    However there are two issues that I don't think have been addressed that make the old API unusable:
    1) URLs in the RSS feeds are not publicly accessible links.  For example:
    http://internal-prod-backend-1515523722.us-east-1.elb.amazonaws.com/index.cfm#themeID/5956 36
    (Copied from https://kuler-api.adobe.com/rss/search.cfm?searchQuery=blue&key=mykey)
    2) There are application errors on the thumbnail URLs.  For example:
    https://kuler-api.adobe.com/rss/png/generateThemePng.cfm?themeid=11&key=mykey
    yields: "error on line 1 at column 1: Document is empty"

  • How do you include the Telemetry API in a Flex project

    I'm getting errors trying to use the Telemetry API as described in this thread,
    http://forums.adobe.com/message/5224777#5224777
    Is there a SWC that I need to add?

    try this
    getAllUserByStatusResult.token = userService.getAllUserByStatus(new Array('Active','Passive'));
    you need to use ASDoc comments in the PHP to tell Flex what type of return
    http://www.youtube.com/watch?v=1n1uHQAP18Q

  • How to loop through the "On My Mac" folders in mail?

    Hi there - i am new to applescript, but am slowly working out how to use it.
    I am stumped on how to write a rule that will move a message to a folder identified by a tag in a message (I am using MailTags).
    I have script that will take the first tag and move the message to a mail folder in a fixed location (e.g. Archive/<tag name>) however I wanted to make it more generic by looping over all of my mail folders and finding one that matched the tag name.
    However I am stumped on how to loop over all of my mail folder names - I have tried:
    repeat with aFolder in (every mailbox of (mailbox for "ON MY MAC"))
    and
    repeat with aFolder in every mailbox of inbox
    etc.
    but none of these seem to work.
    Is there some magic syntax to do this, so that I can do:
    if (name of aFolder = msgTag) then
    move oneMessage to mailbox (name of aFolder)
    end if
    Tim

    You don't necessarily need to assign a variable to the entire list in order to loop through them (unless you really want to) - for example:
    tell application "Mail" to repeat with aFolder in (get mailboxes)
            -- do stuff with aFolder
    end repeat
    There are several AppleScript resources, but the main ones I use are:
    AppleScript Language Guide
    AppleScript Tutorials at MacScripter.net

  • How can we access the java API from the BO report

    Post Author: kusammurali
    CA Forum: JAVA
    Hi,
    Pls clarify my doubt
       Busines Objects Developer suit comes with either JAVA SDK or .NET SDK  COM/VISUAL BASIC SDK . am i right?
       By Using visual basic we can customize the report  (Tools--->Macros  and create VB macro)
        What is the process of accessing  .NET or JAVA SDK ? is there any separate editor for java and .net ?
    Thanks
    Murali.

    Using object tags is the correct way and only way to download the plugin and let the client decide whether he can download it r not. There is no way to install automatically
    I dont think there is a way to install automatically without a user intervention coz, it can open the floodgates for potential hackers.
    Can u cite an example about which programs can be installed automatically and why do u want the plugin to be installed automatically?
    ciao

  • SAP Convergent Charging 2.0: BART server/IEC error in CDRs acquisition

    Good afternoon.
    After having installed the convergent charging 2.0 and run the processes, we can't use IEC to load a CDR into the BART database. We get the following error:
    Rejected [BART_ACQUISITION_SESSION_ACTION_3]*
    Error starting Acquisition Session, server is not available:*
    uid=null [reusable] {}
    The bart.config file seems to be well set. Where we can find that uid that has not been set?
    Kind regards,
    Matteo.

    Hi,
    1. Check whether you have activated your IEC senario within your CAT tool.
    2. Have you got any Usage charges within your Subscription and
    3. Have you linked Access to this Usage Charge within the Subscription ?
    Regards
    Shiva

  • How can I specify the number of bins?

    I am using DM4J to create an OCluster model build component and am utilizing the autobinning capability. I would like to specify for each field the number of bins in which I would like the data segmented. How would I go about accomplishing this task?
    Thanks,
    Dianna

    The ability to set specific number of bins or even custom bin definitions for each attribute is only supported through the ODM API at this point.
    Look at the ODM java doc that was installed in your JDev\lib\ext directory and check out the oracle.dmt.odm.transformation package. You can also look at the ODM Sample code which has sample code that creates the binning specification then applies it to data. The sample code is available in the database Oracle Home directory.

Maybe you are looking for