Conversão de medida
Pessoal, bom dia
Estou em um projeto e me deparei com um problema no GRC quando a unidade de medida do XML é CNT (cento), criamos uma tabela "Z"de unidade de medidda (De Para), onde informo que a unidade do xml - CNT é = a CEM no SAP.
Fui no cadastro do material e inseri essa conversão onde 1 cento = 100 PC, porém na atividade de "Simular fatura NF_e" o sistema executa a conversão normalmente, quando tento gravar o resultado, o sistema informa que as unidades do XML difere da unidade do PO e dá erro não permitindo dar sequencia no processo...Aguém já passou por esse erro?
Qq. ajuda, ficarei grato., estamos no SP14
Abç
Félix
Erro, na conversão de medida após execução do processo.
Similar Messages
-
Transferência de Mercadoria com unidade de medida em Caixa
Boa tarde prezados,
estou com uma dificuldade em um determinado cliente no que se refere a transferência de mercadorias para as filiais. O que ocorre é o seguinte, um determinado item é configurado para comprar em Caixas e cada caixa contém 6 Unidades. Quando é realizado a compra desse item, por exemplo 10 caixas, o SAP contabiliza o estoque corretamente na quantidade de 60 Unidades (10 x 6 ). O problema começa a ocorrer quando eu vou fazer as transferências.
Para se fazer as transferências o cliente utiliza o pedido de venda com suprimento, criando assim o pedido de compra para não ter que digitar todos os itens do pedido. E aqui começa o problema, quando eu faço o pedido de venda com a quantidade de 4 unidades no pedido de compras a quantidade que o SAP calcula que é referente a Caixa é de 0,67 isso equivale a 4,02 unidades, confirme figura 01. Quando se é feita a nota fiscal de transferência, no SAP é Entrega do módulo de Venda, a quantidade que é retirada do estoque "01" é realmente de 04 unidades, mas quando se é feito o Recebimento dessa nota, no SAP é Recebimento de Merc. no módulo de Compra, o estoque é incrementado de 4,02 Unidades conforme Figura 02.
Para fazer o ajuste no estoque o cliente vai em transações do inventário e faz uma saída de 0,02 unidades do item, a pergunta é como fazer para que o SAP considere na entrada a quantidade de Unidades e não de Caixas? Como resolver essa questão?
Segue imagem para melhor entendimentos, quem puder dar uma ajuda, desde já agradeço atenção.]Boa tarde Rodrigo,
Tem um campo no pedido de compra e venda que define se você vai comprar/vender na unidade de compra/venda ou unidade do estoque, ele se chama "unidade de medida de estoque".
Por exemplo:
Se o campo estiver não, se eu fizer o pedido de compra ou venda usando 2 caixas, ele vai entrar/sair 12 unidades de refrigerante.
Quantidade confirmada (no meu exemplo fiz no pedido de venda), 12 unidades de refrigerante. (2 quantidade x 6 por caixa).
Se eu ativo o campo "unidade de medida de estoque", ele considera que a quantidade digitada é a quantidade na unidade de estoque.
Ele considera como 2 itens, e não faz a conversão de unidades.
Infelizmente o SAP 8.82 só tem essa conversão básica de unidade, já na nova versão 9.0 tem muito mais possibilidades de conversão de estoque.
Espero ter ajudado,
Abraço,
Fabio
SAP 8.82 PL16 / SAP 9.0 PL11 (Test) -
Erro de conversão taxa de câmbio em BRL
Olá Grupo, bom dia.
Estou em projeto de migração 4.7 para 6.0, prem estou com erro na pricing do calculo do custo do frete (VI01), onde tenho uma condição que está apresentando a seguinte mensagem:
Condição ZTOG (erro de conversão taxa de câmbio em BRL)
Nº mensagem V1208
Diagnóstico
Na conversão da moeda ocorreu um erro.
As seguintes causas são possíveis:
não existe nenhuma conversão de moeda válida
a operação aritmética está errada
Procedimento
Verificar no customizing na etapa 'Definir fatores de conversão para a conversão da moeda' se existe uma taxa de câmbio válida de ZTOG para e complementá-la eventualmente.
Caso o usuário não possa efetuar esta atividade devido à autorização, deve informar a administração do sistema.
Esse erro impede que o calculo do item seja realizado completamente e isso está interferindo na transferencia para contabilidade do valor do custo do frete.
Alguem já passou por esse erro antes?
Agradeço pela atenção de todos.
Att.
Alécio SilvaMoçatto.
Consegui identificar o erro.
Na condição ZTOG a mesma estava definida como regra de calculo G - Formula, modifiquei para B - Montante Fixo pois já tem uma formula atribuida a pricing na condição que executa o calculo dos valores.
Efetuamos os teste dos processo e funcionaou corretamente.
Como está sendo migrado da versão 4.7 para 6.0 as configurações foram copiadas, mas após aplicação do pacote SAPKH60506 começou a apresentar o erro que informei.
Quero agradeçer pela resposta sobre minha duvida.
Obrigado.
Abs.
Alécio -
Ativação da BadI - Conversão e validação de numeros de cod de barras
Bom dia,
Estou com um problema no qual eu preciso ativar a BadI - Conversão e validação de numeros de cod de barras boleto brasileiro que esta no SPRO ->Contab. financ.-> contab. clien. fornec. -> trans. contab.-> Saida de pag.-> saida de pag. aut.-> meio de pag. -> Config.esp.de pais p/ meio de pag.
Ao clicar nesta badI, vejo que a BOLETO_BARCODE_BR já está implementada, só falta ativar. até consigo ativa-la, quando eu tendo gravar não acontece nada, e é so eu sair da tela e voltar que eu vejo que ela segue desativada.
Analizando o Doc. de ajuda, A SAP me da as seguintes instruções:
Implementar o BAdI ou ativar a implementação fornecida (BOLETO_BARCODE_BR). Para tal, seguir as Instruções correspondentes.
Seguindo as instruções (no caso de Reimplementa-la) no passo 4 - que diz "4. Gravar as entradas e efetuar a atribuição a um pacote."
aparece um pop up pedindo o seguinte: "Executar registro em Online Service system (oss) R/3" e que ao executar esse regitro eu receberei uma chave de acesso.
1- O procedimento que eu estou executando está correto? Pois me parece muito estranho eu ter que reimplatar a BadI para assim eu poder ativa-la.
2- Se for este realmente o procedimento, como é que eu abro esta OSS? o que é preciso? pois eu nunca fiz este procedimento anteriormente.
agradeço desde já.
PauloBom dia Paulo,
A BAdI e esta implementação standard foram liberadas na SAP Note 784748.
Lá tem o passo-a-passo para a criação de tudo e ativação.
Para personalizar, como validações, a SAP recomenda que você crie a própria implementação ao invés de modificar a implementação standard BOLETO_BARCODE_BR, na nota tem estes passos.
Não sei se respondi a pergunta, mas qualquer coisa é só retrucar.
Atenciosamente, Fernando Da Ró -
ola boa tarde, tentei fazer a conversão de um arquivo em pdf para word e deu erro 2 vezes, o q eu faço?? comprei o pacote justa mente para converter esse arquivo e agora??
Hi Ailton,
Does the pdf have some sort of security that might be preventing the conversion.
Have you tried with other pdf files to check if you are able to convert fine?
Regards,
Rave -
Diferença de conversão - Versão 9.0
Bom dia! Prezados,
Na versão 9.0, o processo de reconciliação interna foi otimizado e bases que trabalham com moeda do sistema: Dólar Americano ou qualquer outra moeda que não seja real, no momento de gerar o contas a pagar / receber, apresenta a mensagem que é necessário, informar as seguintes contas: Ganhos por diferença de câmbio e Perdas por diferença de câmbio, onde são definidas em Determinação Contábil, nas Fichas Vendas, Compras, aba Geral. E caso as mesmas, não sejam informadas, o SAP não permite a adição de ambas operações (CP/CR). Após a configuração destas contas, ao incluir um CP ou CR, no LCM gerado, é incluído automaticamente um lançamento de diferença de conversão, constando no mesmo 3 lançamentos (Cliente/Fornecedor x Conta Banco + Conta diferença de conversão).
Gostaria de verificar se alguém já se deparou com este cenário e se possui alguma parametrização para que não seja obrigatório o lançamento de diferença de conversão?!
Atenciosamente,
FernandaBom dia Paulo,
Essa semana minha consultoria SAP já disponibilizou o SAP 9.0 PL11, é melhor você verificar também as outras versões além da PL6, tem várias correções e algumas especificas para o Brasil.
Segue link da central de notas do SAP 9.0
https://websmp230.sap-ag.de/sap/support/notes/1744462
Abraço
Fabio. -
I convered a pdf file to excel, where do i find it
i convered a pdf file to excel, where do i find it
Hi GeneHaas,
Hmmm, personally I run into this all the time. If I don't select 'desktop' it decides where it wants to go! Ha! - now did you check your download folder? Or even recent files under history?
It should also be found within your ExportPDF account.
Let us know if this helped!
Regards, Stacy -
Hi Gurus
When I am loding data from ODS to cube i am getting 'Error:Convers. foreign curr. -> local curr.0.0000000000000000E+00 not found'. Request was failed. Can any one help me in this issue.Up to Ods data loaded successfully.
Thanks in advance
SrimanHi,
first of all, I proposed to look at the currency rates in the system.
If you work with R/3 then you can copy rates into BW:
RSA1 - Source systems area - find your SS - right click on it - Transfer Exchange rates.
After or before that you can look in SE16 at the TCURR table and try to locate rates you need.
You can do it also, as well as set it up, in SPRO, general settings.
Regards,
San! -
X1Pro convering hand wriiten notes from . PDF to .doc
Scanned hand writen notes to .PDF then opened .PDFand saved as .doc
x1 Pro not convering hand writeen notes
exampleThis forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
Maybe Acrobat? http://forums.adobe.com/community/acrobat -
Carácter funcional en Medida dinámica
Hola.
Tenemos la siguiente problemática relativa a medidas dinámicas :
Disparamos la creación de un registro en el infotipo 2006, a partir del infotipo 16. El carácter funcional para éste es 04 (Crear) y, sin embargo, también se está creando en el 2006 a partir de modificaciones del 16. Entendemos que esto no debería ser así, puesto que el carácter funcional no es 06 (Crear y Modificar).
Agradeceríamos si alguien puede hacer alguna aportación al respecto.
Muchas gracias.Hemos visto la posible explicación : realmente no se trata de una modificación del infotipo 16 lo que dispara la creación del registro en infotipo 2006, sino una copia "COP". Por tanto, es posible que el valor 4 para el carácter funcional haga alusión tanto a "INS" como a "COP".
La cuestión sería entonces : ¿es posible en una medida dinámica disparar el evento si es "INS" pero no dispararlo si es "COP"?.
Muchas gracias. -
Hello,
my problem is that customer key has leading zeros in queries. Users don´t want those leading zeros.
Checking InfoObject defintion for customer - it is character and has no Convers.Routine.
Masterdata table however has leading zeros and so do InfoProvider. (Alpha Routine is used in InfoSources).
Now I wonder if the Conversion Routine entry in InfoObject definition would change the output of customer key in queries? Would there be more effects? Or is Alpha perhaps the wrong conversion routine?
I don´t want to get any problems in datastaging due to changing conversion routine in InfoObject definition.
Does anyone have experience with this problem?
Thanks,
AngelikaHi:
What is the data type for that infoObject. I think its CHAR.
If it is CHAR and they add zeros in Transfer Rule, you cannot get rid of them in Query easily because its almost like Text.
If you are using BEx, then you might think about writing some Custom Code.
Ram C. -
Creative MediaSource File Convers
I just bought a Zen Micro and I have a question about transfering mp3's using creative media source. I only want to upload 28kbs songs onto my micro to maximize the number of songs and reduce battery consumption. At the moment I'm using a third party program to convert 92, 320 etc bit rate mp3's into 28 kbs files and then uploading them to my Zen through the explorer.
Is there any way to do this in one quick step using Creative Media Source? I cant seem to find any instructions or information on this topic.
Thanks.Dingus' suggestion makes it somewhat easier as it allows you to place those songs directly into your MediaSource library and then just hit transfer. Its more efficient than using an independent encoder. I was hoping mediasource could do it in one step but this ways fine.
Thanks for your help. -
H/T make it so a contact can no longer see convers...
my private conversation with said "contact" is sharing our conversation with other people.
i need a way that will not just delete what i see as our history, but the history for the "contact".
actually i would rather keep the history for myself, but block the contact from seeing it.
if that's not possible, but it's still possible to block the contact from viewing conversation history, that is fine too.
willing to do anything that will stop this contact from viewing our conversation history any longer.
so no limits on what i will do, and anything helps.
i know that clearing history only effects my side, along with hiding conversation, and blocking contact.
wondering if it's possible to delete my skype account, and if that will remove my history with the contact.
once again, if this method also deletes history for myself and all other contacts, i am still willing.
anything to stop the contact from having the ability to view our conversation history.
this is extremely important as personal information was given out, identification to steal identity, banking information, excreta.
VERY IMPORTANT!
if this is not possible to do on my own, then i will need help from skype staff, and how to get in contact with them as soon as possible also needs to be known.
this matter is extremely pressing, and every moment that passes counts.
please & thank you so much for your time in only reading this.
if you can give me any information at all, it would help greatly.
PS: i dual boot between linux/ubuntu and windows XP, and have skype on both operating systems.Hi, Luluillu, and welcome to the Community,
Skype does not provide the facility you describe to "pull" instant message history from those with whom you have corresponded. Your commentary reads like a much larger issue - I recommend you contact your local law enforcement agency to seek counsel on what your options may be.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often! -
How to input GS vendor to P/O during convering from PR to PO by ME59
Dear Experts.
My SAP Version : R/3 release 4.6C
my company is 3rd party company so, most P/Os are created by P/R of 3rd S/O.
these days, we need to save P/O with Vendor and GS Partner Vendor.
we would like keep the way of S/O-P/R-P/O Creation by ME59 like following steps.
1. create S/O with GS(Goods Supplier) Vendor and HR(Fixed Vendor) .
2. check P/R with Fixed Vendor
3. run ME59.
I tried to find user exit to input GS partner vendor at P/O during running ME59.
but, it seems that there is no user-exit for EKPA and EKKO-LLIEF.
eventually, I'm going to modify RM06BB10 (ME59 program )
if there is no way.
Do you know any better way....?
any response would be helpful for me. thank you in advance..!
IF errflg EQ space.
CALL FUNCTION 'ME_CREATE_PO_HEADER'
EXPORTING
i_bedat = sy-datlo
i_bsart = hbsart
i_bukrs = hbukrs
i_ekgrp = bat-ekgrp
i_ekorg = bat-ekorg
i_konnr = bat-konnr
{ INSERT TKCK909997
i_llief = lv_llief " Set GS Vendor to P/O*
} INSERT
i_lifnr = bat-flief
i_reswk = bat-reswk
i_vorga = cva_ab
i_werks = i_werks
i_ltsnr = i_ltsnr
EXCEPTIONS
error_message = 1.
ENDIF.Hi Jane,
These are the user exits for tr ME59, you can check one of these:
Exit Name Description
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
Hope this will help you...... -
Right file adapter Content Convers Parameter needed ?
In text file to text file I have the following given input/output
Input structure is this:
<?xml version="1.0" encoding="UTF-8"?>
<ns:MT_SEND xmlns:ns="http://comp.com/sap">
<Recordset>
<Record>
<FIELD1>
<FIELD2>
<FIELD3>
</Record>
</Recordset>
</ns:MT_SEND>
Output structure is this:
<ns:MT_RECV xmlns:ns="http://comp.com/sap">
<Recordset>
<Header>
<field1>
<field2>
<field3>
</Header>
<Record>
<field4>
<field5>
<field6>
</Record>
</Recordset>
</ns:MT_RECV>
It is simple 1 to 1 mapping Record(SEND) to Record (RECV)
All Header fields are Constants: c1,c2,c3
All fields are strings.
The intput text file is fixed length:
Field4(5 char) Field3(char4) Field2(char3)
The desired output text file is fixed length:
field1( 8 char) field2(7 char) field3(6 char) field4(5 char) field3(char4) field2(char3)
Can someone please asap send me the right Content Conversions parameters for Receiver and Sender file adapters ?Please be specific when giving me Recordset, name, values,etc I will appreciate it much!
Thanks!
JonHello,
>>>>It is simple 1 to 1 mapping Record(SEND) to Record (RECV)
>>>>All Header fields are Constants: c1,c2,c3
>>>>All fields are strings.
>>>>The intput text file is fixed length:
>>>>Field4(5 char) Field3(char4) Field2(char3)
<b>But your source structure has Field1, Field2, Field3</b>
>>>>The desired output text file is fixed length:
>>>>field1( 8 char) field2(7 char) field3(6 char) <b>field4(5 char) field3(char4) field2(char3)
Same should be case below also confirm!!!</b>
Regards,
Maybe you are looking for
-
Htmldb_collection and db read
Is there a way to force sequential read over scattered read when using htmldb_collection.add_member? I have traced an issue with response time to the following section of my code: if length(dcg) > 1 then htmldb_collection.add_member(
-
Apple 160gb --- where is the album cover art???
Ok, I imported many songs from my CDs and when I went to the folder they were in, I saw the album cover. But for some reason, when these songs were transferred to the iPod, none of the album covers showed up. I did import the songs on iTunes. I impor
-
Oracle BLOB value to a LC variable
Hello, Is it possible in LC ES2 to coerce oracle blob value to some livecycle variable ? When mapping sql query result (column of type BLOB) to a LC variable (of type Document), we receive: com.adobe.workflow.datatype.InvalidCoercionException: Cannot
-
Shuffle won't sync file not found
I can't add songs to my ipod shuffle 4 - receive an error message - file not found
-
Spare parts Demand Planning and Forecasting SCM
Hi , I am APO DP consultant can any body help me on questions on AS-IS and To-Be analysis Of Spare Parts Demand Planning and forecasting in SAP SCM. If You have any Documents or links or nay information on these please give replay. Ram