Converse 2300 - Problem with storing similar numbe...

Hi. We have several Converse 2300 phones in the office and I am trying to store two numbers we use the most under the one-touch memory buttons. The trouble that I am having is that because these two numbers coincidentally have the same last 6 digits (although the dialling code is different), the phone seems to think they are one and the same and I cannot store them as two separate names. Has anyone seen this problem and have any idea of how I can get around it? Any suggestions would be much appreciated as it is driving us all nuts! Thanks.

I am on my 3rd Converse phone for the same reason. I always answer by picking up phone and then hitting the headset button.
Other fault with this phone is one way transmission (caller cant hear you) got used to tapping the phone a couple of times just where the handset would lie (Used to be know years ago as sticky switch hooks)
Don't think there is much you can do, the rest of my colleagues at work use the same phone and we all have the same issues.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

Similar Messages

Problem with storing and retriving a different langauge font in mysql

hi,
i have problem with storing and retriving a different character set in
mysql database ( for example storing kannada font text in database)
it simply store what ever typed in JTextField in database in the
formate ??????????? and it showing ???????? .
please what can i do this problem.
thanks
daya

MySQL does not know about what type of Font you use or store. that is applicatioon specific. All it knows is the character set that you are storing and the data type and data. THere are something you should know when working with database and Java:
1. make sure you know what character set is used for the database table.
2. make sure you know what character set is used by Java (default to UTF-8 ..
sort off - there are few character that it cannot save). You can enforce the
character set being sent to the database by the String's getBytes(String charsetName) method.
3. make sure the application you use to view the table use the correct character set
if it use a different character set, then any character that it does not recogized
will be replaced with a quetion mark '?'....eventhough the data is correct.

Problem with Vikings Mobile number (Poland)

[Topic title updated by moderator to be more descriptive. Original topic title was: "Problem with Vikings Mobile number"]
Hello, I can't login Skype Qik for Windows Phone with Vikings Mobile country: Poland. Still getting msg wrong Phone number when try to login. On android i can login without any problems.

Hi, can you specify the first 5 digits of the phone number? For example +48 xxx
Добавляйте баллы, если моё сообщение вам помогло. Спасибо!
Возврат денег | Система обновления подписок | Заблокировали/взломали аккаунт? | Пропали контакты? | Не зайти в Skype/не добавляются контакты? | Не удалось загрузить базу данных?
Подписки | Цены

Problem with reached maximum number of connections to database

Dear Experts,
Our Production system was not responding properly last week.
The below was the reply from the Basis team.
"It seems that we have again problem with reached maximum number of connections to database. We have extended this number to 100 this year and now it seems that it’s not enough again. It seems that something is running on Production, which takes over too many connections."
They have increased the number to 200 as a work around.
Do we have any means to find out, which component or application is causing the issue.
Please advise me if any better way is available to correct the issue.
Please see the below trace.
From default trace:
======
Caused by: com.sap.engine.services.dbpool.exceptions.BaseSQLException: ResourceException occurred in method ConnectionFactoryImpl.getConnection(): javax.resource.R
esourceException: (Failed in component: dbpool, BC-JAS-TRH) Cannot create connection. Possible reasons: 1)Maximum allowed connections to DB or EIS is reached. You
can apply CSN Note 719778 in order to check and resolve connection leaks. 2) Configuration to DB/EIS is wrong or DB/EIS is temporary unreachable. 3) Connections ar
e not enough for current load.
        at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:60)
        at com.sap.security.core.persistence.datasource.imp.J2EEConnectionPool.getConnection(J2EEConnectionPool.java:205)
        ... 61 more
Caused by: javax.resource.ResourceException: (Failed in component: dbpool, BC-JAS-TRH) Cannot create connection. Possible reasons: 1)Maximum allowed connections to
DB or EIS is reached. You can apply CSN Note 719778 in order to check and resolve connection leaks. 2) Configuration to DB/EIS is wrong or DB/EIS is temporary unr
eachable. 3) Connections are not enough for current load.
        at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:230)
        at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:343)
        at com.sap.engine.services.connector.jca.ShareableConnectionManager.allocateConnection(ShareableConnectionManager.java:54)
        at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:52)
        ... 62 more
Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException is thrown by the pooled connection: com.sap.sql.log.OpenSQLException: No c
onnection to data source SAPEPPDB available. All 100 pooled connections are in use and 70 connection requests are currently waiting. The connection pool size might
need to be adjusted.
        at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:192)
        at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:221)
        ... 65 more
Caused by: com.sap.sql.log.OpenSQLException: No connection to data source SAPEPPDB available. All 100 pooled connections are in use and 70 connection requests are
currently waiting. The connection pool size might need to be adjusted.
======
Thanks and Kind Regards,
Jelbin

Stop all instances(including DB) and start again, Hope it should work.
It may happened that jar has not been synchronized with the database and may be version mismatch with the java.
719778 - Data Source fails to return connection
1650472 - Transactions are interrupted due to database connection periodically failing to establish
1138877 - How to Deploy External Drivers JDBC/JMS Adapters
Change the connection pool so that it can connect to DB as per the note 719778
Regards
Vijay Kalluri

Problem with material master number range

Hi,
we have a problem with the material number range when stop the transaction of creation a material master data (MM01) the system has a jump of number range.
Example -> while creating a new material master the system gives me a number preview (46) but if I stop the transanction without save the master data the system doesn't give me the number 46 in the next master data but give me the next number 8in this example 47).
It there a way for not have this jump of number range?
Thanks!
Gaetano

Hi Gaetano,
This ia a standard thing..even I have experienced it.
Regards,
Chiranjib

Hi I have a problem with my licence number for Lightroom

Hi I have a problem with my licence number for Lightroom, has been forced to re-install lightroom again but, have downloaded a trial version of adobe but now works license number are not, there are some who can help me with what is going wrong. Thanks Henrik

Download Lightroom 5 from Product updates and install, use your serial number

Problem with IN OUT Number, OUT RefCursor for EF Model StoredProcedure call

When I call a stored procedure using the EF Model and implicit binding via App.config which has three parameters i.e. 'IN Number', 'IN OUT Number' and 'OUT sys_refcursor', the 'IN OUT Number' is not set correctly on return from the procedure.
The 'IN OUT Number' is for an error code and is set to 12345 on input and is then set to 54321 by stored proceedure for return.
The correct value is returned when the call is via OracleCommand using implicit binding via App.config but remains unchanged when the call is via EF Model and implicit binding via App.config.
The ODP documentaion says you cannot have two OUT RefCursors when using EF Model but does not say you cannot have OUT RefCursor and other non-RefCursor OUT parameters.
The idea behind this type of procedure is to have multiple input parameters to configure and filter the stored procedure and an output result set that consists of an error code and a collection of result rows in a RefCursor.
I am using 11g R2 database and ODP 11g Release 2 (11.2.0.2.30) and ODAC Entity Framework beta.
The query uses Scott/tiger schema with parameters department code, error code and list of employees for department.
code:
PROCEDURE TEST_PARAMETERS
DEPT IN NUMBER,
ERROR_CODE IN OUT NUMBER,
DEPT_EMPLOYEES OUT sys_refcursor
AS
BEGIN
DBMS_OUTPUT.PUT_LINE('DEPT = [' || DEPT || ']');
DBMS_OUTPUT.PUT_LINE('ERROR_CODE = [' || ERROR_CODE || ']');
OPEN DEPT_EMPLOYEES for SELECT empno, ename from emp where deptno = DEPT;
-- set ERROR_CODE for return
ERROR_CODE := 54321;
END TEST_PARAMETERS;
The App.config for implicit RefCursor binding is as follows ...
<oracle.dataaccess.client>
<settings>
<add name="SCOTT.TEST_PARAMETERS.RefCursor.DEPT_EMPLOYEES"
value="implicitRefCursor bindinfo='mode=Output'" />
<add name="SCOTT.TEST_PARAMETERS.RefCursorMetaData.DEPT_EMPLOYEES.Column.0"
value="implicitRefCursor metadata='ColumnName=EMPNO;
          BaseColumnName=EMPNO;BaseSchemaName=SCOTT;BaseTableName=EMP;
          NATIVE_DATA_TYPE=number;ProviderType=Int32;
          PROVIDER_DB_TYPE=Int32;DataType=System.Int32;
          ColumnSize=4;NumericPrecision=10;
               NumericScale=3;AllowDBNull=false;IsKey=true'" />
<add name="SCOTT.TEST_PARAMETERS.RefCursorMetaData.DEPT_EMPLOYEES.Column.1"
value="implicitRefCursor metadata='ColumnName=ENAME;
          BaseColumnName=ENAME;BaseSchemaName=SCOTT;BaseTableName=EMP;
          NATIVE_DATA_TYPE=varchar2;ProviderType=Varchar2;
          PROVIDER_DB_TYPE=String;DataType=System.String;
          ColumnSize=10;AllowDBNull=true'" />
</settings>
</oracle.dataaccess.client>
When the call is via OracleCommand both outputs are correct i.e. ERROR_CODE gets set to 54321 and the correct emplyees for department 10 are returned
code:
private void TestParametersViaOracleCommand()
try
string constr = "DATA SOURCE=ORCL;PASSWORD=tiger;PERSIST SECURITY INFO=True;USER ID=SCOTT";
OracleConnection con = new OracleConnection(constr);
con.Open();
OracleCommand cmd = con.CreateCommand();
OracleDataAdapter adapter = new OracleDataAdapter(cmd);
DataSet ds = new DataSet();
cmd = con.CreateCommand();
cmd.CommandText = "SCOTT.TEST_PARAMETERS";
cmd.CommandType = CommandType.StoredProcedure;
cmd.BindByName = true;
OracleParameter dept = cmd.Parameters.Add("DEPT",
OracleDbType.Int32,
ParameterDirection.Input);
dept.Value = 10;
OracleParameter errorCode = cmd.Parameters.Add("ERROR_CODE",
OracleDbType.Int32,
ParameterDirection.InputOutput);
errorCode.Value = 12345;
// RefCursor output parameter implicitly bound via App.Config
adapter = new OracleDataAdapter(cmd);
adapter.Fill(ds);
// should be 54321 and is ...
Console.WriteLine("after call errorCode.Value = " + errorCode.Value);
Console.WriteLine("list size = {0}", ds.Tables[0].Rows.Count);
// only one table
DataTable deptEmployeesTable = ds.Tables[0];
for (int ii = 0; ii < deptEmployeesTable.Rows.Count; ++ii)
DataRow row = deptEmployeesTable.Rows[ii];
Console.WriteLine("EMPNO: " + row[0] + "; ENAME: " + row[1]);
catch (Exception ex)
// Output the message
Console.WriteLine(ex.Message);
if (ex.InnerException != null)
// If any details are available regarding
// errors in the app.config, print them out
Console.WriteLine(ex.InnerException.Message);
if (ex.InnerException.InnerException != null)
Console.WriteLine(
ex.InnerException.InnerException.Message);
output:
before call errorCode.Value = 12345
after call errorCode.Value = 54321 (should be 54321!)
list size = 3
EMPNO: 7782; ENAME: CLARK
EMPNO: 7839; ENAME: KING
EMPNO: 7934; ENAME: MILLER
However when call is via EF Model the correct employees are returned but the ERROR_CODE parameter is unchanged on return.
code:
private void TestParametersViaEFModel()
var context = new ScottEntities();
Decimal dept = 10;
ObjectParameter errorCodeParameter = new ObjectParameter("ERROR_CODE", typeof(decimal));
errorCodeParameter.Value = 12345;
Console.WriteLine("before call errorCodeParameter.Value = " + errorCodeParameter.Value);
// RefCursor output parameter implicitly bound via App.Config
var queryResult = context.TestParameters(dept, errorCodeParameter);
// should be 54321 and is ...
Console.WriteLine("after call errorCodeParameter.Value = " + errorCodeParameter.Value + " (should be 54321!)");
List<TestParameters_Result> deptEmployeesList = queryResult.ToList();
Console.WriteLine("list size = {0}", deptEmployeesList.Count);
for (int ii = 0; ii < deptEmployeesList.Count; ++ii)
TestParameters_Result result = deptEmployeesList[ii];
Console.WriteLine("EMPNO: " + result.EMPNO + "; ENAME: " + result.ENAME);
output:
after call errorCodeParameter.Value = 12345 (should be 54321!)
list size = 3
EMPNO: 7782; ENAME: CLARK
EMPNO: 7839; ENAME: KING
EMPNO: 7934; ENAME: MILLER
errorCodeParameter.Value IS NOT CORRECTLY RETURNED!
If there is no RefCursor then both outputs are identical i.e. the parameters are being passed in correctly and the problem is not with the 'IN OUT' parameter. Also same thing is true if ERROR_CODE is made an OUT parameter. Also tried changing the position of the parameter in the list but still get same problem i.e. works when OracleCommand but not when EF Model. Also note that the RefCursor results are correct for both types of call i.e. it is just a problem with the value of the 'IN OUT ERROR_CODE' parameter.
I have also enabled debug stepping from Visual Studio 2010 into Oracle PL/SQL as described in
"http://st-curriculum.oracle.com/obe/db/hol08/dotnet/debugging/debugging_otn.htm"
and have verified by inspection that the correct values are being passed into the stored procedure and that the stored procedure is definitely setting the ERROR_CODE to 54321 prior to return.
Most of our stored procedures have these type of parameters i.e. several IN params to configure the work of the stored procedure, an OUT NUMBER parameter for the Error_Code if any and a RefCursor for the result list.
Is this a bug or a feature? Am I doing something wrong?

Just to clarify ....
If the ERROR_CODE parameter is made an 'OUT' parameter instead of an 'IN OUT' parameter the correct return value is given for the OracleCommand invocation but the WRONG value is still returned for the EF Model invocation i.e. just changing the parameter from 'IN OUT' to just 'OUT' does not fix the problem.

Problem with field "batch number" and table "et_item" at BBP_CONF_CHANGE

Hi experts!,
I have a problem when I use the badi BBP_DOC_CHANGE_BADI and with the method BBP_CONF_CHANGE.
I want to fill the field "batch number" at web SRM with the PO number, I thought to write it at suitable or appropriate field at table "et_item" but this table has not any similar field which I can write it.
Thanks in advance.
Best Regards.

Hello,
we cannot fill the BATCH field because it is not available in the table ET_ITEM in the method BBP_CONF_CHANGE.
Do you know how can we fill a default value in this field when the user is creating or modifying a confirmation item?
Thank you.
Best regards.

Problem With Stored Procedure

Post Author: Ranjith.403
CA Forum: General
Hi,
Am new to crystal reports with stored procedures
am created a report using a stored procedure in oracle. In that Stored Procedure am Using a temporary table.
After inserting values into the table am assigning to ref cursor.
Refcursor having fields like item,onhandstock,purchase rate
This report working fine in oracle version 9.2.0.1.0 where comes to oracle version 9.2.0.8.0 it's giving the varchar values correctly.
The Number values are showing as 0.
Help me to solve it.
Thanks in Advance,
Ranjith

Try modularising this large procedure into smaller procedures and functions, and determine which part is causing you trouble.

Problem with vendor address number in LFA1/ADRC

Hi,
We've had a really strange problem occur and we can't find out how it happened. We have two vendors who have somehow started to share the same address number in ADRC (field LFA1-ADRNR contains the same value for both vendors). Both vendors are old and have been on our system for a few years.
We use SRM but I'm told the master data is maintained in R/3 4.7 (although it is possible to maintain it in SRM, we don't use that process).
Can anyone suggest how this could have happened, and moreover, how we can change the address number on one of the vendors to point elsewhere. We can't find any transaction and LFA1 isn't maintainable in SE16.
Really appreciate any help that anyone can offer!
Regards,
Angela

Our addresses should be unique. I've downloaded table LFA1 and we only have two vendors which share the same adress number - and this is an error.
The problem with sharing the address number is if we try to change the address for vendor 1, then the same change applies to vendor 2. This is not correct.
Is it possible that two vendors have somehow become linked like parent and child? Can anyone explain how this could have happened and how we can undo it?
Thanks,
Angela.

2 problems with tv model number 55sl417u

Alright, I have been having two problems with this toshiba tv. One: It will just randomly shut off while watching tv or playing video games. It will shut off and then after 45 seconds it will come back on. Second problem is that i will not be able to shut it off using the remote or the buttons on the tv. Its like it freezes. To get it to turn off i just shut off the power strip for 30 seconds then turn it back on. The tv will then turn on and i can turn it off. I dont know whats wrong or what to do. Can anyone help?

Yeah it randomly shut off on me two hours before the super bowl sunday and did not turn back on. The clicking sound was made the picture would not come on and was left with three green blinking lights. so after spending an hour on the phone trying to get someone from customer service, they told me some one from Nexicore would contact me Monday. I waited till about 5 Monday for a phone call and never got it. So i decided to call Nexicore myself and they told me they were waiting for my local tech guy to receive a part from Toshiba. It could take 3 to 5 business for him to receive the parts, so now i am waiting for a phone call from that guy. If i dont hear anything by friday i will be calling Nexicore again to check on the status. Such a pain for a tv that is only a few months old. Thank god it is under warrenty

Having problem with storing data in array

Hi,
I'm having problem on storing data in array. My problem is that each time it loops, the array just keep overwrite instead save to the next index. Like at 0 the value is 123, and 1 is 234. But i having that all data capture all overwrite at 0 till the last data it still show at 0. How do i correct this problem?
Solved!
Go to Solution.

How to use array to do comparison? Like Array 1 go thru array 2 to get data Loss out and build an array. Like Array 1 ,1000,1024,1048,etc before 1520 fall in between Array 2 range 1000-1500. So Freq 1000,1024,1048 etc will get Loss value as 1 and 1520 fall in between 1500-2000 will output Loss 2. and so on till the end of the list. How should do this? Need help on this.
Array 1                                                Array 2
Freq                                                   Freq   Loss
1000                                                  1000      1
1024                                                  1500      2
1048                                                  2000      3
1100                                                   :
1200                                                   :
:                                                         18000
1520
18000

Problems with storing EJB Remote in session and retrieving.

We store EJB remote object in session and differnt clients retrieve it from session
before making a business method call. This seems to work in most cases but some
times it gives the exception attached. This happens only in a clustered environment.
What has been observed is that if we put the remote object inside a hashtable
which in-turn is stored in session retrieval from hashtable does not give this
problem.
Any suggestion / solution would be greatly appreciated.
regards,
Rajesh
The exception Stack trace is attached
java.rmi.NoSuchObjectException: Unable to locate EJBHome: 'BalconHome' on server:
't3://176.19.183.6,176.19.183.15:9616
at weblogic.ejb20.internal.HomeHandleImpl.getEJBHome(HomeHandleImpl.java:80)
at weblogic.ejb20.internal.HandleImpl.getEJBObject(HandleImpl.java:184)
at weblogic.servlet.internal.session.SessionData.getAttribute(SessionData.java:395)
at com.chase.ccs.util.AccountInfoAccessor.setCurrentAccountAttributeBalcon(AccountInfoAccessor.java:362)
at com.chase.ccs.util.ModelAccessor.initBlaconOfferModel(ModelAccessor.java:311)
at com.chase.ccs.balancetransfer.OfferPortlet.service(OfferPortlet.java:88)
at com.chase.ccs.balancetransfer.OfferView.pageStart(OfferView.java:65)
at com.chase.ccs.util.ModuleStarter.doAllPageStart(ModuleStarter.java:236)
at jsp_servlet._templates._template0005._UXaQVaXTUaSYaWaSRZfdXbWSfYXbTRQb.__ccs_mm_tgl_pfp_grid._jspService(__ccs_mm_tgl_pfp_grid.java:316)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:482)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:308)
at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:116)
at com.epicentric.servlets.ServletUtils.include(ServletUtils.java:150)
at com.epicentric.template.Style.execute(Style.java:538)
at com.epicentric.taglib.html.IncludeGridTag.doStartTag(IncludeGridTag.java:57)
at jsp_servlet.__index._jspService(__index.java:560)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:242)
at com.epicentric.servlets.stackable.SiteDispatcherServlet.service(SiteDispatcherServlet.java:195)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2546)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2260)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
[ejb exception.txt]

Hello Rajesh,
Thanks for your sugggestion. Rajesh Karuvat and myself are working on the same
project.
I want to know if there is any specific patch for this problem for weblogic 6.1
sp3.
The reason we can not just try Weblogic sp4 is that we are using epicentric 4.0
that is cvertified with weblogic 6.1 sp3 and not sp4.
I have also opened a case with bea about it. I would reaaly appretiate if you
can check the detials about it. The case number is 376228.
Please do revert back.
Thanks,
Shilpa
Rajesh Mirchandani <[email protected]> wrote:
Try SP4.
Rajesh Karuvat wrote:
we are running Weblogic 6.1 SP3
"Rajesh Karuvat" <[email protected]> wrote:
We store EJB remote object in session and differnt clients retrieve
it
from session
before making a business method call. This seems to work in mostcases
but some
times it gives the exception attached. This happens only in a clustered
environment.
What has been observed is that if we put the remote object insidea hashtable
which in-turn is stored in session retrieval from hashtable does not
give this
problem.
Any suggestion / solution would be greatly appreciated.
regards,
Rajesh
The exception Stack trace is attached
java.rmi.NoSuchObjectException: Unable to locate EJBHome: 'BalconHome'
on server:
't3://176.19.183.6,176.19.183.15:9616
at weblogic.ejb20.internal.HomeHandleImpl.getEJBHome(HomeHandleImpl.java:80)
at weblogic.ejb20.internal.HandleImpl.getEJBObject(HandleImpl.java:184)
at weblogic.servlet.internal.session.SessionData.getAttribute(SessionData.java:395)
at com.chase.ccs.util.AccountInfoAccessor.setCurrentAccountAttributeBalcon(AccountInfoAccessor.java:362)
at com.chase.ccs.util.ModelAccessor.initBlaconOfferModel(ModelAccessor.java:311)
at com.chase.ccs.balancetransfer.OfferPortlet.service(OfferPortlet.java:88)
at com.chase.ccs.balancetransfer.OfferView.pageStart(OfferView.java:65)
at com.chase.ccs.util.ModuleStarter.doAllPageStart(ModuleStarter.java:236)
at jsp_servlet._templates._template0005._UXaQVaXTUaSYaWaSRZfdXbWSfYXbTRQb.__ccs_mm_tgl_pfp_grid._jspService(__ccs_mm_tgl_pfp_grid.java:316)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:482)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:308)
at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:116)
at com.epicentric.servlets.ServletUtils.include(ServletUtils.java:150)
at com.epicentric.template.Style.execute(Style.java:538)
at com.epicentric.taglib.html.IncludeGridTag.doStartTag(IncludeGridTag.java:57)
at jsp_servlet.__index._jspService(__index.java:560)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:242)
at com.epicentric.servlets.stackable.SiteDispatcherServlet.service(SiteDispatcherServlet.java:195)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2546)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2260)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Rajesh Mirchandani
Developer Relations Engineer
BEA Support

Report Conversion Tool - problem with logging in table OBJ_G_MIGRATION

Hello Community-Members,
since several days I am searching different BO-Communities for a solution, but I didn't find any threats about my problem.
I am new to BO XI R3.1 and I want to convert deski-reports with the report conversion tool.
I tried it directly on the server-machine and all is ok (report is converted inclusive the logging in the audit-table OBJ_G_MIGRATION).
When I try it on my client-machine, the conversion is made successfully, but there is no result in the audit-table.
On the client-machine, I use the same connection like on the server machine and on both machines, I am logged on (in the report conversion tool) with the "Administrator"-user.
Has anyone an idea? Could it be a problem of user-rights in the Oracle-DB?
kind regards
Guenny

Hello Denis,
thank you for your reply.
From my client machine I can successfully test the connection to the Audit-DB. With non BO-Tools like "SQL Tools1.4.1" I can also connect to that DB.
After your reply I have tested once again and I have found something else strange.
If I convert a deski-report, and the conversion-status is "not converted", the Audit-DB is written (for example: error-text = "document cannot be read" / workaround = "remove protection password if set").
But when I convert the same report together with an other report, which will result in "partially converted", nothing is written to the Audit-DB (same effect as when I convert only reports with status "partially convertet").
regards
Guenny

Problems with my online number from Mexico City

Hello,
My online number from Mexico 55 84 21 94 is not working correctly in Mexico City. When my family use a landline from MX to call me another person answer the phone call, but if they use a cellphone it works and I receive the phone call. That's really weird 'cause when I suscribed to the services I read that people can call me using a landline or a cellphone. Could you help me with this situation? Do I need another online number?
thanks,
Gaby
thanks,
Gaby

Please follow these Steps:
1. Only do Step 1 if you are on WIN7:
Stop Skype.
Be sure that Compatibility Mode is not enabled (right-click on Skype shortcut icon/launcher and select Properties >> Compatibility) - for Windows 7 users only.
Try to launch Skype.
2. If Step 1 fails or you are NOT using WIN7 do:
Open an Internet Explorer browser, and go to msn.com, what happens?
If it fails, Please do the instructions below. Using your Windows Control Panel, please do:
Internet Options -> Advanced Tab Please click the "Reset" button.
Then, Go to the Connections Tab.
Make sure that the only checkbox checked is "Automatically detect settings", then click the "OK" button.
Close any open Internet Explorer browser windows, open a new IE browser window and try msn.com again. What happens? If it works, please stop/start Skype What happens?
3. If Step 2 does NOT solve the problem:
Please install the normal version using the instructions below:
You can install the Current release by doing this from the top of this page:
Get Skype -> Windows -> Choose the regular release, please do NOT remove what you already have installed, simply, install over.
These instructions have worked for many and is the quickest thing to try to resolve issues such as this.
Also, what operating system are you on?
What is the Make and Model of your computer?
Do you have all Windows updates and updates to any hardware devices by the manufacturers?
About Me You can also use a IP Camera as your camera for Skype video Example Instructions

Converse 2300 - Problem with storing similar numbe...

Similar Messages

Maybe you are looking for