Conversion Agent 7.1 - SP06
Hi SDN members,
While looking at the service mareket place , I have noticed
that there is only a SP05 for CONVERSION AGENT 7.1
and non for SP06.
Can anyone ellaborate on the subject?
Regards,
Nirmod.g
Well, I see it like this and everything work for me:
Are you logged in with your S-user account? Also I think you have to be authorized for downloading the software. Can you check under your profile, if you have some authorizations?
Similar Messages
-
SAP Conversion Agent for PI 7.1 EHP 1 and Windows 2008 Support
Hello
I have read that some people were able to run SAP Conversion Agent on a PI 7.1 EHP1 Installation on Windows 2008 Sever. But in the Product Availability Matrix there is no support for 2008 yet.
In the SAP Library (http://help.sap.com/saphelp_nwpi71/helpdata/en/43/fc39c16bfb025ee10000000a1553f7/frameset.htm) under the release notes for SAP Conversion Agent there is still version 8.5, but when I install the actual Support Package I have Conversion Agent 8.6 running and according to information on the informatica.com site this version is running under 2008!
Has anybody clear and actual information about which OS the newest SAP Conversion Agent for PI 7.1 EHP1 supports? Or has anyone experiance on Conversion Agent and Windows 2008 Server?
Thanks
ChristophHi Mark
Thanks for your reply! Fact is that in the actual Package (SP06) the version of Conversion Agent Engine supplied is not 8.5.5 as in the SAP Note mentioned, it is version 8.6.0:
C:\Documents and Settings\pi1adm>CM_console -v
Engine-Version: 8.6.0(Build:30)
Engine-Syntaxversion:4.00.10
I will oben a ticket for that ...
Regards
Christoph -
Error in XI while using standard EDI Libraries of Conversion Agent
Hi,
We are planning to use conversion agent for EDI to XML conversion using standard libraries.
Right now working on EDI 867 and is working fine in my local system. But when we moved the contents
to XI server, we are getting the following error
*ConversionAgent/ServiceDB/TS_867_Product_Transfer_and_Resale_Report_Parser/TS_867_Product_Transfer
andResale_Report_parsers_segments.tgp(547): is_optional is not a known profile or PT*
Can anybody help us to solve this issue?
Regards,
RaviHI,
The module name must be localejbs/sap.com/com.sap.nw.cm.xi/CMTransformBean.
The parameter name must be TransformationName.
The parameter value must be the conversion agent project name deployed in serviceDB. In the above example, the Tutorial_3 project from the documentation in step 1 is used.
And also it was failed to update the log.See the folder access onceagain.
many links provided in that blog itself ,plz check.
Regards
Chilla.. -
Sender Mail Adapter with SAP Conversion agent
have some1 used SAP conversion agent on attchment from XI Sender Mail adapter?
it seems to ignore the attchment of the e-mail
the sender configuration module tab is as follows :
1.localejbs/AF_Modules/PayloadSwapBean transform
2.localejbs/sap.com/com.sap.nw.cm.xi/CMTransformBean CM
3.sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail
The paramters are
transform swap.keyName Content-Disposition
transform swap.keyName Content-Description
transform swap.keyValue attachment
transform swap.keyValue codeco
CM TransformationName ZIM_CODECO_VALIDATIONS
The Convesion Agnet runs prefectly when using the Conversion Agent engine
thx,Shai Rosenzweigcheck with tis may helpful for you
http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
Regds
Abhishek -
Help required regarding Integrating Conversion Agent with SAP-XI
I want to run a simple File to File scenario which involves integrating conversion
agent. I gone through a webblog:Integrate SAP Conversion Agent by Itemfield with SAP XI
I deployed the module and I configured the channel in the same way what was specified in the webblog.
But when I run my scenario I found CM_TRANSFORMATION_ERROR as the error in communication channel monitoring.
Can u please provide me the solution for correcting the above error, this would be a great help for me..HI,
see the below links
http://help.sap.com/saphelp_nw04/helpdata/en/43/6f1f39a08e6fcae10000000a1553f6/CMSUserGd.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/ee/c9f0b4925af54cb17c454788d8e466/frameset.htm - cc
http://help.sap.com/saphelp_erp2005vp/helpdata/en/95/bb623c6369f454e10000000a114084/content.htm - fcc cOUNTER
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent
with item fiels.
Regards
Chilla -
Create EDI 997 with conversion agent
Hello,
I work with conversion agent by ItemField to convert EDI messages to xi and from XI to EDI.
I succeeded to receive EDI 850, to parse this message and to transfer it to the IDOC and create purchase order.
Now I try to send back to the customer EDI acknowledgment (997).
I'll be happy to hear if someone use with conversion agent to create EDI 997.
EladHi Elad,
What are 997s?
997 Functional Acknowledgments are EDI transactions that a receiver of EDI transaction sets sends back to the party that sent the EDI transaction sets. All EDI transactions require an EDI 997 to be sent back.
Here is an example
Wal-Mart sends an EDI Purchase Order to a supplier. With EDI Standard X12, Wal-Mart expects a 997 to be sent back to them. The 997 lets Wal-Mart know that the supplier received the Purchase Order. It does not say that the supplier accepts the terms or conditions of the purchase order. It simply lets them know that the supplier successfully received the Purchase Order.
Here is another example. A supplier sends Wal-Mart an EDI Invoice. Wal-Mart will send a 997 back to the supplier. The 997 informs the supplier that Wal-Mart has successfully received the invoice.
CovalentWorks handles all of your EDI transactions for you, including 997s, as an outsourced EDI service. If you choose us as your EDI provider, our system will automatically send and receive all your 997 Functional Acknowledgements. And every one of them is processed for you at no charge.
Thanks,
Satya Kumar.. -
Does conversion agent or XI provide any out of the box mapping content to map conversion agent's EDI XML schema and IDOC XML? For example is there a mapping content (in CA or XI) between EDI_MSG_850_Purchase_Order and Orders.Orders05? If so where can I get it?
But I know it provides conversion of native edi to xml format via adapter modules.
I read lot of blogs and forums, but couldn't find this information.
Thanks
nullHi,
Why dont u got for seeburger for the EDI mapping into XML,seeburger have the standasrd mappings which are predefined and u have to define them in ur module tab in adapter.
Coverstion agant is a tool which will convert any type data that u imazine into XML but it done have the standard mappings predifined.
Check links on
Conversion Agent
http://help.sap.com/saphelp_nw04/helpdata/en/43/6d95e0ac846fcbe10000000a1553f6/CMGetStart.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/content.htm
Check links on Seeburger.
http://www.seeburger.com
Please see the below blogs
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
Regards,
Phani
Reward points if Helpful -
Urgent: IDOC to EDI with SAP Conversion Agent
Hi,
I have a requiremetn like IDOC to EDI ( Gentran ) scenario.
We have decided to use SAP Conversion Agent to deal the same.
Can anybody share their experiences on this kind of scenario.
Needed step by step information to complete would be appreciated with the full of points.
Cheers.,
Echeck with tis may helpful for you
http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
Regds
Abhishek -
INVOIC96a to EDI-XML by Conversion Agent fails, Special Character Problem
Hi,
with your help in another thread, I recognized that the EDIFACT INVIOC96a Parser of the Itemfield Conversion Agent has a Problem with special characters.
So like described in this blog SAP XI supports EDIFACT i created a Library Project and tried to test the conversion.
It is only working when no special characters are in the EDI file. If there a special characters insight the file, conversion agent say's no error, but the xml file is corrupted. In fact you can't display it in IE or by opening it with XMLPad it says "Not well formed".
Hope that someone has an idea for this problem
Thank you
regardsHi,
I have already faced the same problem when using Itemfield Conversion Agent.
I solved the same with change properties of the project.
In conversion agent project :
opne the menu : Project --> Properties --> Encoding --> Change the output Encoding Schema (None).
use None in that schema in place of XML.
Your problem can be solved.
Regards,
Sandeep Kaushik -
Error in Conversion Agent Module
I have tried to set up a scenario using conversion agent to transform a PDF file to XML. I followed the instruction steps in this blog <a href="/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield:///people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield .But the communication channel can't work properly. I check the status of communication channel in RWB, and it gives following error message:
2007-03-14 10:22:00 Success Channel InvoicePDF_Sender: Send binary file "C:SharefolderDemoinvoice.pdf". Size 14378 with QoS EO
2007-03-14 10:22:00 Success TransformationName: InvoicePDF
2007-03-14 10:22:00 Error Transformation failed; CMException: Failure while trying to create engine log C:/Documents and Settings/admin/Application Data/SAP/ConversionAgent/CMReports/Init/Events.cme- for more information see file://internal
2007-03-14 10:22:00 Error Attempt to process file failed with com.itemfield.contentmaster.CMException
However I have already granted the access permission of the event folder to user "<sid>adm" and "SAPservice<sid>". Even grant full control access to everyone for the folder, the issue remains unsolved. Hope someone can help to give some advice on my case. Thank you in advance.HI,
The module name must be localejbs/sap.com/com.sap.nw.cm.xi/CMTransformBean.
The parameter name must be TransformationName.
The parameter value must be the conversion agent project name deployed in serviceDB. In the above example, the Tutorial_3 project from the documentation in step 1 is used.
And also it was failed to update the log.See the folder access onceagain.
many links provided in that blog itself ,plz check.
Regards
Chilla.. -
Hi,
I have browsed the net for quite some time to get some idea about EDI message handling in XI using the SAP Conversion Agent (CA). I have understood what is CA all about. but i still have few questions unanswered.
1. How flexible or complex it is to use the the CA as compared to SEEBURGER ?
2. It is a must to use the EDI message parsing templates provided in the CA library ?
3. the cost factor. I have read that it is free for development and test landscapes. but for production landscape, we need to pay some license fee. Will this deprive us of any key functionality in the Dev and QUA landscape ?
I have gone throught the help document. Please help me find answers for the above questions.
Thanks,
HariHi SreeHari,
Please refer to the link below,which might help you.
[SeeburgerVsConversion Agent |Re: Seeburger EDI conversion Vs XI Conversion Agent EDI conversion?;
Regards,
Madhu -
Help for Using Itemfeild Conversion Agent
Hi all,
i have read several blogs and formus on the use of Conversion Agent software for performing EDIXML To EDI format conversion. Here is the problem i have.
we are doing an IDOC to File scenario and in the Filesender adpater we need to configure and module which does the necessary conversions(EDIXML to EDI-834). I created an Serializer using Content Master Studio and deployed the project to the Content master Engine on the XI server. When i give the transformation paramters which are mentioned in the blogs below
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/alexander.bundschuh/blog/2006/03/14/integrate-sap-conversion-agent-by-itemfield-with-sap-xi
SAP Conversion Agent
There are no erros shown in the SXMB_MONI or either in the Adpater Framework, but the target file is not being created. can anyone please advice me about how the module name should be set in the File Adpater(SP 17) and how can i check the erros in the conversion module in XI.Julie,
Can you please pass the information if you have resolved the problem?
Ravi -
ANSI X12 meta data availability in conversion agent??
Hello,
Is there a provision for availability of ANSI X12 meta data in SAP conversion agent. We are trying to process EDI orders using the X12 INDUSTRY standard. Please advise.
-Krishi,
SAP Conversion Agent together with SAP Net Weaver, enables to automate complex integration activities for a multitude of data and document formats. These include unstructured and partially structured documents such as Office files, data streams, printing applications, and other application-specific formats.
Easily integrate unstructured and semi-structured data into SAP Net Weaver Process Integration using the Conversion Agent.
Conversion Agent dynamically converts unstructured messages from Microsoft Word,Excel,PDF plain text.
Semi-structured formats such as HL7,SWIFT,HIPA, ANSI X12 and COBOL to PI understandable SOAP XML.
So that it helps to easily integrate the information need into the back-end systems. Conversion can also be used as the reverse process to convert from XML to unstructured or semi-structured formats
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sap%2bconversion%2bagent%2b-%2bthe%2blong%2bjourney
Conversion Agent - Handling EDI termination characters
Conversion Agent a Free Lunch?
Integrate SAP Conversion Agent by Itemfield with SAP XI
regards
sr -
XML to EXCEL with Conversion agent error: XML to EXCEL PROCCES FAILD
Hello,
I have scenario from Oracle database to Excel.
For this scenario I use with conversion agent by itemfield to transfer data from XML to EXCEL.
The scenario not worked.
Few points:
1. I add the conversion agent module to SAP XI receiver communication channel.
2. When I change the scenario to oracle to xml (without using conversion agent) the scenario works OK.
3. When I drag the CME file to the studio I found the error message: XML to EXCEL PROCCES FAILD.
4. I use with conversion agent in other scenario (EDI to IDOC) without any problem.
5. I'm not found any clue for this problem in XI RWB.
Eladhi Elad,
to do the conversion,you have to define a module and import it into you CC.
also see nexts blog
Yet another "from database or internal table to Excel"
Reading Excel Data from Java Using HSSF API
Reading Excel line items using the jExcel API
Read Excel instead of XML through FileAdapter
Thanks
Rodrigo -
Conversion Agent by Informatica - serializing mappers
Hi Guys,
I need to create a Conversion agent module (To be called with in Comm channel of XI).
The module will be constructed of a parser and 2 mappers.
1st parser will parse a CSV file to XML.
2nd mapper will change the XML structure from non-hierarchical to Hierarchy XML .
3rd map will perform Additional transformation before the SAP PI standard adapter module is called.
please elaborate - does this method of transformation can be carried out using the ItemField tool.
and if so, how (what function should I call+short explanation)> Will the standard CallAdapter module be able to still mange
> the archive of the original mesasge although the ouput of each converison module
> is different?
Yes, as long as the output of each stage is compatabile with the input of the next stage. You can imagine this as a module chain with each step in a serail fashion.
>Original file - CSV.
> Parser - output XML
> Mapper - output XML
> Need to archive the roginal CSV..
You can do this while you are picking up the file using the File adapter. Please see the below link. you have to set the processing mode as "Archive".
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
Maybe you are looking for
-
Multiple system maintenance cycles are not shown in pop up for selection
Hi, In change manager, when we create a change document from a change request, we dont get a pop up for selection of maintenance cycles with multiple systems in it. The change document is getting created by taking the only available maintenance cycle
-
Itunes application not opening due to an unknown error (13010)
itunes not opening due to an unknown error (13010) Mac OS 10.4.11
-
Mountain Lion Strike's Again!!
I have 2 games Star Defender 3 & 4 by Awem, both work perfectly with Lion, now I have updated again to Mountain Lion 10.8.2, again they both work but I have no sound, except when I use mirroring through apple tv, been on to applecare support, they ar
-
Hi Everyone, I have to query a table that stores daily information and I only need to get the current month's data out of there. There is A LOT of data in there (4 years X 15 stores X 65 depts). I was wondering if there was a way to get the current m
-
hi i have 2 prob. 1; only half of my keyboard works 2 i cannot install mac 9.1 udate