Conversion Agent Studio in XI
Dear All,
I am working in a XI development project and here I have a scenario to convert the PDF document (Purchase Order) into XML document and use the same to create a sales order by using Process Integration.
For the above scenario, I found that we need to install Conversion agent studio in SAP PI system and use the same to generate the XML out of PDF document.
I have already deployed the software in SAP Netweaver. Now I have no idea how to use this software and where I will get this in my SAP NW system.
Many thanks & Best regards,
Arun
Hi,
please go through these
/people/alexander.bundschuh/blog/2006/03/14/integrate-sap-conversion-agent-by-itemfield-with-sap-xi
/people/paul.medaille/blog/2005/11/18/conversion-agent-a-free-lunch
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3332- [original link is broken] [original link is broken] [original link is broken] How To Get Started Conversion Agent
Reward Points if Helpful
Regards
Sesha
Similar Messages
-
SAP Conversion Agent Studio Preview Version
Hi,
Does anyone have knowledge about SAP Conversion Agent Studio Preview Version?
I've downloaded it from SDN and it says it comes with an Eclipse version, but i doesnt.
When i try to point it to my existing Eclipse it says it needs version 2.1.2 oe 2.1.3. of Eclipse, but these are quite old. They can be downloaded from a 2004 archive site. (?)
Are there newer version of the SAP Conversion Agent Studio Preview Version?
Any suggestions are welcome.
Thx
RobertHi Conversion Agent experts,
Do you have any ideas?
Thx
manuku -
Qery related to Conversion Agent Studio installation
Hi All,
I have a query related to Conversion Agent. We have downloaded the SAPNWCM20_0-20001444.SCA file and installed the conversion agent engine on SAP XI J2EE engine which is basically installed on Sun Solaris system.
I want to use conversion agent studio at a remote place on Windows OS 32 bit system.
Please help me
1) how to install the <b>conversion agent studio on windows 32 bit system.</b>.
2)<b> Is it possible to install conversion agent studio on Windows 32 bit system because Conversion agent engine is installed on Sun Solaris system.</b>
Thanks & Regards
PrabhatHi Can you please elaborate more on installation of conversion agent studio as the document mentioned in the link is not in details regarding installation of conversion agent studio.
Thanks & Regards
Prabhat -
Installing Conversion Agent studio
Hi
We are on XI 3.0 SP18 and want to try out using conversion agent 1.0 for a scenario.
I downloaded file SAPNWCM18_0-10003671.sca.zip from service.sap.com and then try to install converstion agent studio on my Windows XP desktop - as per instructions - I am asked to extract the ConversionAgent.sda file - and then run one of the *exe file that was extracted from the sda file . However I do not see any exe file in the contents of the ConversionAgent.sda file - Is this the sda file that contains conversion agent studio and the conversion agent engine ? If so, how do I go about installing the studio and the engine on my desktop - ?Nilesh
Thanks for the reply. In my case, when I extract the ConversionAgent.sda file using winzip - I do not see any *exe file in the extracted files - I see only the following four files
Setup_Aix.bin
Setup_Aix.bin_imp
pathWithoutDot
wc
along with a couple of folders assemblies and Meta-inf.
Just to repeat, I downloaded the SAPNWCM18_0-10003671.sca.zip file from service market place for my aix 64 bit system on which XI resides. I get my ConversionAgent.sda file by extracting the above zip file -
Conversion Agent Error - CMException
Hi ,
We are trying to map an excel file to another system using conversion Agent for transformation. We have created the transformation in the Conversion Agent Studio and deployed the service in our integration engine on XI Server(in the serviceDB folder).
But the file is not getting transformed and the message is failing in the communication channel only giving the below errors . ( Runtime WorkBench - > Communication Channel monitoring ) .
The source file is getting picked up from the respective folder where it has been placed, and also the TransformBean is being called too.
"Attempt to process file failed with com.itemfield.contentMaster.CMException".
"Transformation failed : CMException : Failure while trying to create engine log .
D:/ConversionAgent/Log/Init/Events.cme"
Please let us know what parameters we have missed out due to which we are getting this error.
Thanks
SatishHi refer this link may be helpful
have a look at the following(page 8 for conversion agent)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9913a954-0d01-0010-8391-8a3076440b6e
/people/alexander.bundschuh/blog/2006/03/14/integrate-sap-conversion-agent-by-itemfield-with-sap-xi
/people/paul.medaille/blog/2005/11/18/conversion-agent-a-free-lunch
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield- [original link is broken] How To Get Started Conversion Agent
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
http://help.sap.com/saphelp_nw04/helpdata/en/43/6f3f4347336fc9e10000000a1553f6/CMSap.pdf
in this document:
http://help.sap.com/saphelp_nw04/helpdata/en/43/6d960dac846fcbe10000000a1553f6/CMAdminGd.pdf
To check with your installation and configuration refer following blog
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
Thanks!!
Pls reward if useful -
SAP CONVERSION AGENT - XPATH not found in DATA HOLDER?
Hi Eperts,
I'm trying to work on this Tool, getting some problem in Conversion Agent Studio..
I Had created my project with PARSER in Conversion Agent, source file will be Pipeline separated Text File , which has multile rows...And I had created XSD for my Message Interface in XI..
When i'm defining my ANCHORS/MARKERS/CONTENT/ .
getting error in DATA Holder, I'm not able see my Schema / XPATH in the respective namespace...
Could anyone can guide me pl.
Thanks in Advance..
regards,
vasantj.Hi vasantj,
Did you manage to resolve this issue?
I face the same problem.
Please ellaorate.
Nimrod.G -
SAP Conversion Agent: HL7 library project could not be executed
Hi experts
I'm using SAP Conversion Agent version 4.3.0 on a PI 7.0. I'm trying to use a HL7 library project. On the Conversion Agent Studio side everythings works fine: the library project is created and a test of the service with a local HL7 file was successful. After that I make the project on the Conversion Agent Studio available and copy the project from the local \SAP\ConversionAgent\ServiceDB directory to the PI Conversion Agent ServiceDB directory.
So far so good... but when I try to execute the CA project via File Sender Adapter the following error is thrown:
"Invalid service 'TEST'. Check service name and service database"
Module Exception 'com.sap.aii.af.mp.module.ModuleException: <Status><severity>4</severity><description>Invalid service 'TEST'. Check service name and service database.- for more information see file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</description><log_file>file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</log_file><Event error_code="401024" severity="error_fatal">
<description>Invalid service 'TEST'. Check service name and service database.- for more information see file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</description>
<time>N/A</time>
</Event>
</Status> caused by: com.itemfield.contentmaster.CMException' found, cause: com.itemfield.contentmaster.CMException
I also created another parser project, without HL7 libraries, this works also on Conversion Agent Studio and on PI side without any problems.
Do you have any ideas?
Thx,
manukuHi Conversion Agent experts,
Do you have any ideas?
Thx
manuku -
Hi All,
I am doing an IDOC to EDI File scenario, and EDI Conversion using Conversion agent. I have designed the Serializer from the standard library in Conversion agent studio. I need to to add the Line wrap for the output EDI file. How can i do this in Conversion agent studio?
Sumanhttp://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/90bf7c8d-a197-2b10-96b9-a0feb39b5ddb [original link is broken]
-
Conversion Agent and the module processor
Hi,
i have to make an offer for a client of ours. Therefore i was thinking to propose the conversion agent for developing a process module into the inbound communication channel in the XI-Scenario.
But i think i understand sth wrong or does this module substitute the normal mapping inside the XI?!
Can someone give me a hand?!
thx in advanceJens,
Conversion Agrent is used to convert non XMl data into XML and vice versa.
For example it can read a PDF, EXCEL and conevrt it into XMl and also convert XML into EDI formats etc etc.
You use the conversion agent studio to develop the conversion mapping and then deploy it as a module. From the comm channel you call the Conversion Agrent Module which in turn runs on its own Engine and does the conversion for you.
So, if possible, you can also use conversion agent to actually read your source and create iyt in the format of the target and thgerbey replace Mapping. But, it all depends on the feasibility of what you are trying to do.
Regards,
Bhavesh -
Conversion Agent Deployment ?
Hi
I have deployed all the required component for Conversion Agent in PI system using SDM and all successfully.
1. CM_JavaAPI.sda
2. CM_RemoteSupportInterface.sda
3. CM_TransformModule.sda
4. ConversionAgent.sda
But then how to deploy my project from Conversion Agent Studio to the PI server. I have went through some of the blog and i have to copy the project directory to ServiceDB in the PI server.
Could anyone help where i can found the ServiceDB in the PI server ?
Thank you and Best Regards
Fernandhi
try check this doc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b10d986b-0701-0010-eca9-b11ca1f43f9d
regards
kummari -
ItemField Conversion Agent - ContentMaster Studio
Hi
I'm trying to convert an XI-XML Message to HL7-XML Message and not HL7 Flat file . I would like to use ItemFiled ContentMaster Studio and develop a Serializer to read the XI-XML Document and Convert it to HL7 XML Document which needs to sent across to FDA . I trying to get some material on creating Serializer i couldnt find any . If somebody could give me some link or some ideas it would be great . I did come across a white paper written by Prasad Illapani which is using library for the HL7 . Unfortunately my requirement is not there as part of the standard library .
eMDR - Electronic Medical Device Reporting Using HL7 for Individual Case Safety Report . (HL7 ICSR XML File) .
I appreciate any links and pointers .
Thanks
SudhirHi,
Check this blog
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
Thanks,
venkat -
Help for Using Itemfeild Conversion Agent
Hi all,
i have read several blogs and formus on the use of Conversion Agent software for performing EDIXML To EDI format conversion. Here is the problem i have.
we are doing an IDOC to File scenario and in the Filesender adpater we need to configure and module which does the necessary conversions(EDIXML to EDI-834). I created an Serializer using Content Master Studio and deployed the project to the Content master Engine on the XI server. When i give the transformation paramters which are mentioned in the blogs below
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/alexander.bundschuh/blog/2006/03/14/integrate-sap-conversion-agent-by-itemfield-with-sap-xi
SAP Conversion Agent
There are no erros shown in the SXMB_MONI or either in the Adpater Framework, but the target file is not being created. can anyone please advice me about how the module name should be set in the File Adpater(SP 17) and how can i check the erros in the conversion module in XI.Julie,
Can you please pass the information if you have resolved the problem?
Ravi -
XML to EXCEL with Conversion agent error: XML to EXCEL PROCCES FAILD
Hello,
I have scenario from Oracle database to Excel.
For this scenario I use with conversion agent by itemfield to transfer data from XML to EXCEL.
The scenario not worked.
Few points:
1. I add the conversion agent module to SAP XI receiver communication channel.
2. When I change the scenario to oracle to xml (without using conversion agent) the scenario works OK.
3. When I drag the CME file to the studio I found the error message: XML to EXCEL PROCCES FAILD.
4. I use with conversion agent in other scenario (EDI to IDOC) without any problem.
5. I'm not found any clue for this problem in XI RWB.
Eladhi Elad,
to do the conversion,you have to define a module and import it into you CC.
also see nexts blog
Yet another "from database or internal table to Excel"
Reading Excel Data from Java Using HSSF API
Reading Excel line items using the jExcel API
Read Excel instead of XML through FileAdapter
Thanks
Rodrigo -
Conversion Agent Environment Variables.
Hi Experts,
We are using on Conversion Agent for converting EDI file data into XML.
Using Parser for this.
The problem is related to Enviornment Variables to be loaded on XI Server.
What will be the environment variables for this purpose and what will be the value for the same.
I have loaded three Environement Variable on XI Server for Conversion Agent,
1. CLASSPATH - C:\Program Files\SAP\ConversionAgent\api\lib\CM_JavaAPI.jar
2. IFCONTENTMASTER_HOME - C:\Program Files\SAP\ConversionAgent\
3. Path - C:\Program Files\SAP\ConversionAgent\bin
Are these entries correct ? Please help.
When I am using
To use the remote support interface:
1. In Microsoft Internet Explorer, version 6.0 or higher, browse to
http://HOST:PORT/CMViewer
Selecting Event : View Initialization Events, it is giving me an
error : Event file not found!
Selecting Event : View Execution Events, it is not showing any Date in
Date field and not showing any service in Service Field and Next
Pushbutton is also disable.
What is the problem ? Please help.
Regards,
Study SAP.Yes it shows up after restart of BIDS .
But during design time this is a bug I hope Microsoft fixes this bug in the future releases
Mudassar
It's not really a bug. Visual Studio loads the environment variables when starting up.
In future releases you use projects and parameters instead of environment variables, so the issue goes away ;)
MCSE SQL Server 2012 - Please mark posts as answered where appropriate. -
XI supports EDIFACT without SAP Conversion Agent and others.
Hello.
Somebody knows the best way to convert EDIFACT message using XI?
What I can do this without using softwares of conversion like:
- SAP Conversion Agent;
- Seeburger;
- BIC Mapper and others.
Thanks very much in advance.Hi,
See for converting the EDI XML to EDI you need to have a mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
Here is the link for your reference:
/people/ricardoandres.maienza/blog/2007/04/06/edifact-to-xml--stylus-studio-solution
http://www.stylusstudio.com/edi/EDIFACT_translate.html
The steps to convert EDI to XML / XSD can be found at the following link:
http://www.stylusstudio.com/edifact_to_xml.html
Stylus studio download link: http://www.stylusstudio.com/xml_download.html
Thanks and Regards,
Chirag Gohil
Maybe you are looking for
-
Migration of forms and reports developed using Headstart VERSION 3.4.1
Hi, We have developed an application in forms 4.5 reports 2.0 based on repository 1.3.2 and Headstart Designer/2000 Template Package VERSION 3.4.1 Now we want to migrate to Oracle 9i(web enabled) 1)Is it possible to migrate only the forms and reports
-
Invoking a BPEL process from a Java application
Hello all I am trying to invoke a BPEL process from a JSP. The JSP is deployed in a different weblogic domain (different from the BPEL weblogic domain). I am getting the following error messages. Can some one help ?? java.lang.Exception: Failed to cr
-
Vista 64 BSOD on sync after installing itunes 8.0.2.20.
Note that this isn't the problem in the sticky above which apparently went away with iTunes 8.0.1. I've never had a problem until now (iTunes 8.0.2.20). If I connect my iPod Video 30GB to my PC, the PC crashes. I remember seeing a message about a USB
-
CR XI Issue with Stacked Bar Chart
I'm hoping this question is easy. I'm having trouble creating a stacked bar chart. I want to do a Bar Chart which will show one "Bar" for each Priority (Priority 1, 2, 3, 4 or 5) and then for each Priority divide out, by color, the Status (Submitted,
-
Using setXPath with filterFunc doesn't work
hi, i have a dataset: var dsImages = new Spry.Data.XMLDataSet("xml.php?field=images", "/data/line", { filterFunc: MyPagingFunc, useCache: true }); i'm using the paging filter function from the samples. this is working fine. but now i want to filter t