Conversion factor error in the source system
Hi All,
I got conversion factor error in the source system, when i tried to load maste data.
can anybody help me in. It is urgent please...
Thanks in advance
Narendra
Hi...Post the error
Regards
Similar Messages
-
Conversion factor error in the source sys
Hi all,
I got the following error message: " conversion factor error in the source sys" while loading data, can one give the solution? points will be given
thanksHi Ganesh,
Could you try to tcode : rsa3 in your SAP Source system in order to test the extraction?
If you get an error in that part, you need to check whether there is problem in conversion transformation/not .. ?
Hopefully it can helps you a lot ganesh,
regards,
Niel
(tks a lot for any points you choose to assign). -
Error in the Source system while data loding through Process Chain
Hi,
I am facing issue while data loading for certain extractors through Process chain. Load of 0BPM_WIHEAD, 0BP_LOGHIST, OBPM_OBJREL, 0BPM_DEADLINES(there are 2-3 more extractors) is getting failed daily with message Error occurred in the source system and if we repeat the same it is getting executed successfully.
Regards,
JavedHi..
It means that the extraction job is failing in the source system..
Please check the Job log in the source system --> Copy the request nimber --> In the source system go to SM37 --> Give * then the request number......execute --> Check the Job log..
Look there may be multiple reasons behind this....
1) Connection problem : Go to SM59 and test the connection, If you don't have the access in SM59...then go to RSA1 --> Source Systems --> Right click --> Connection Parameters --> Connection Test
2) Or may be work processes are not available and due to which jobs are failing due to time out...
In both the cases you can check with the Basis Team if they can suggest something....or you can change the process chain scheduling time if possible, and schedule it in such a time when less no of jobs are running..
Regards,
Debjani.. -
Inbound idoc error in the source system
HI,experts
I manually configurate the idoc type ,message type ,etc between the BW system and r/3 source system when the automatic program encouters errors. And the communication between BW and source sysyem seems ok since the source system is activated successfully in BW side.
But when I check the inbound the idoc in source system after i triggerred a full load for the datasource 0FI_GL_4,an error occurs in the inbound process in R/3. There is no control information in the idoc which message type is RSRQST.
how can i figure this issue out ?could anyone help me ?HI,ALL
Thanks for your replies and documents.
Now I find the problems lies in the error connection between R/3 and BW. IF the autoconfiguration is completelly correct , the table RSBASIDOC in both system should be added one record.But now when the source system is activated successfully ,the table in R/3 side has no entry while the BW side has one entry .juding from this ,there is no BW system connected to the R/3 ,which is proved when I fill the setup table for LO datasource an error message shows that there's no BW system is connected to the OLTP system.
How can i figure this issue out ?If I want to do an automatic configuration ,what shall I do ? -
Error in the Source System...
Hi
<b>RSA1-->Source System >(Context Menu)> Check</b>
<b>Error:</b>
<b>The BW IDoc type ZSBA011 is not the same as the source system
IDoc type ZSBD012
</b>
ThanksHi BW KING,
This error due to RFC connect is not there between BW to Sorce system.
OR else There is RFC connection mis match.
You have to ask the BASIS People to correct the RFc connection between BW to your source system.
Other wise data will not get it will show RFC connection Failed.
Thanks,
kiran. -
Trfc error in the source system
Hi,
I got an error as trfc error in the souirce system,How to proceed regarding this.How to check RFC connections.What are the transaction codes for trfc and to check rfc connections.. please let me know.
Many ThanksHi,
We are having some problems.
While loading the data in BI 7.0 from R/3 ECC 6.0, sometimes (not always) IDOCs are getting stuck before coming to BW System.
The job always finishes successfully from R/3 side but before coming to BI, IDOCs are getting stuck and we manually have to push them into BI System.
How to avoid the situation of IDOCs getting stuck and what could be the possible reasons.
Please guide.
Thanking You,
Tarun Brijwani. -
Error in the source system for fiscal year variant K4 Period 00
We are experiencing the following issue when loading data from module Flexible real estate RE-FX CASHFLOW CUBE OREFX_C06 Error in source system Fiscal year variant K4 is not defined for the period 00.
Hi,
You need to check in your source whether you have maintained Fiscal Yr Variant or not? Talk to you Functional person before you do the BI Extraction.
In Table T009B
You can check Fields
MANDAT - client
PERIV - Fiscal Year Variant
BDATJ - Posting date YYYY
BUMON - Posting date calendar month
Check Table T009B and see if you fiscal variant is maintained for all periods of Years (as per error its not). maintain the same in Source system and transfer Global settings in BW to copy the same into BW system.
@AK -
BE3.5 : Error from the source system while activating the transfer rule
When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error in [[ ]]
Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
Diagnosis
An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system CI2220 to identify the error, and remove the cause.
CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
Thanks in advance
ArunabhaHi Arunabha,
I would confrim that there is no issue with the datasource in your r/3 system. Can you run the datasource on your r/3 system with no errors using RSA3?
If the datasource is ok, then I would check out the error message number in OSS or SDN. I have seen this error before, I just cannot recall what the fix was.
Cheers! -
Processing error occured in the source system
Hi Experts,
I am extracting payroll data from ECC 5.0 to BW side, after the extraction I'm getting warning message proceesing error in the source system.
In the source system apllication log the following warning message displyed.
<u>No assignment of payroll data to BW month for country grouping 99</u>.
I checked at BW side the data was available in the PSA and Data Target, but the status was in YELLOW for long.
If any one come accross this , please provide good inputs....
Thanks & Regards
KumarI have the same problem.
The following text is ment to help me.
Havent solved it yet, but explects to find the activity 'Assigning the Payroll Data to BW Month' in spro.
best regards
Ingrid
Message no. HR_BW_PY99026 Assigning the Payroll Data to BW Month.
Diagnosis
No assignment is specified for country grouping 20 in the Customizing activity "Assigning the Payroll Data to BW Month".
System Response
The SAP standard "End Date of For-Period" is used for this country grouping.
Procedure
Enter an assignment for the country grouping in Customizing the DataSource 0HR_PY_1.
Choose: R/3 Customizing Implementation Guide -> Integration with Other SAP Components -> Business Information Warehouse -> Settings for Application-Specific DataSources -> Human Resources -> Assigning Payroll Data to a BW Month. -
Restoring the source system connection in BW
Hi all,
Ive been trying to upload data for 2 of my infocubes, and the extractions are bouncing. The message in R/3 is told me to check the connection. The RFC are fine. But when I tried to restore the source system connection (RSA1 in BW), it sent me the following error messages:
1.- Basic type ZS 118 does not exist.
2.- The following error in the source system:
3.- Incorrect IDoc type ZSAB023 in the ALE definition of the source system.
The description in each error is:
Error #1:
Diagnosis
IDoc type ZS 118 could not be found.
System response
Procedure
Please enter an IDoc type that exists.
Error #3:
Diagnosis
Incorrect IDoc type ZSAB023 in the ALE definition of the source system.
System response
Error when sending data to BW.
Procedure
Enter IDoc type ZS 118 .
They told me this IDocs are created automatically by the connection. Is that true?
How can I fix this, so that I can restore my connection and do the data extraction?
Thanks a lot
Regards,
VicHi Victor Tostado
1.- Basic type ZS 118 does not exist.
Type Transaction WE30. Check iDoc types Obj. Name : RSSEND -> press F7
a.) Enter 'RSSEND' in the Obj. Name field. You will see an entry similar to the one below:
RSSEND Data transfer from the source system (template)
[-] E1RSSH Data transfer IDoc: Header information
[+] E1RSHIE Data transfer Idoc: Hierarchy header information
E1RSTXT Data transfer IDoc: Texts
b.) Enter RSREQUST in the Obj. Name field. You will see an entry similar to the one below:
RSREQUST Data request to the source system
[-] E1RSRH Data request IDoc: Header segment
[+] E1RSRHI Data request IDoc: Hierarchy
[+] E1RSRTX Data request IDoc: Texts
[+] E1RSRMD Data request IDoc: Master data
[+] E1RSRIS Data request IDoc: InfoSource
c.) Enter RSINFO in the Obj. Name field. You will see an entry similar to the one below:
RSINFO Info IDoc
[-] E1RSHIN InfoIDoc: Status segment
E1RSPIN InfoIDoc: Data packet segment
E1RSEIN InfoIDoc: Error segment
d.) If any of the above do not exist, contact your BASIS Team.
2.- The following error in the source system:
Type Transaction SM59. Maintain RFC destinations
a.) Open the RFC Destinations. b.) Find your Source System and double click on it. c.) Technical setting should contain information regarding your source system d.) Logon Information should contain source system client and name & password for you remote logon.
3.- Incorrect IDoc type ZSAB023 in the ALE definition of the source system
Type Transaction WE21. iDoc Processing Ports.
receivers port is not available go to WE21 -> create port
a.) Select 'Ports' and then 'Transactional RFC'. b.) Click on the Port # for you source system. c.) Verify description & SAP R/3 versiond. RFC Destination should be one created in SM59. If non-existent then create one.
I) Type Transaction SE16. Data browser (for R/3 -> BW Connections)
Enter RSBASIDOC Print out copy of all entries in table.
II) Type Transaction SM30. Msg Types & Assignment to iDocs
Enter 'EDIMSG' in the Table/View field. Click on the 'Enter Conditions' option for Restrict Data Range. Click 'Maintain'. Select Message Type. Then enter 'RSSEND' in "From' field. Verify that the Basic Type matches what is in your RSBASIDOC table for each of your connections. If any are missing any entries you must create them as follows: Create another session and type Transaction WE30. Enter IDoc Type (ZSBAXXX) in Obj. Name field (Suggestion: Start new type with 'ZS' + Transfer Structure Prefix + (3)#'s) Select Create. Select "Create from Copy'. Enter 'RSSEND" in 'Copy From' field Enter Description (i.e. IDoc Type for BW Development) Execute (Green Check). Repeat for other missing entries.
Regards
Sangram Sutar -
Processing error in the soyrce system
Hi Experts,
I am extracting payroll data from ECC 5.0 to BW side, after the extraction I'm getting warning message --proceesing error in the source system.
In the source system apllication log the following warning message displyed.
No assignment of payroll data to BW month for country grouping 99.
Diagnosis
No assignment is specified for country grouping 99 in the Customizing activity "Assigning the Payroll Data to BW Month".
System response
The SAP standard "End Date of For-Period" is used for this country grouping.
Procedure
Enter an assignment for the country grouping in Customizing the DataSource 0HR_PY_1.
Choose: R/3 Customizing Implementation Guide -> Integration with Other SAP Components -> Business Information Warehouse -> Settings for Application-Specific DataSources -> Human Resources -> Assigning Payroll Data to a BW Month.
I checked at BW side the data was available in the PSA and Data Target, but the status was in YELLOW for longtime and in the manage tab it is in RED state.
If any one come accross this , please provide good inputs....
Thanks & Regards
SKHi,
You have to set the Settings in ECC system
R/3 Customizing Implementation Guide(SPRO) -> Integration with Other SAP Components -> Business Information Warehouse -> Settings for Application-Specific DataSources -> Human Resources -> (Pay-Roll Plugin) Assigning Payroll Data to a BW Month.
make a new entry for the BW Month for the country
Regards
Happy Tony -
Hi Experts,
I have a load in bw which extracts the data from R/3. In the IP selection i have OLAP variable set to 0calmonth and the selection is one month. The loads gets failed with the page allocation error in the source system. I tried reducing the packet size with different option. Still i couldn't complete the load.
If any one come across with this kind of situation please help to resolve this issue.
Thanks
DeepthiHi ,
Below are the parameters and values for them which are recommended by SAP.There is a SAP Note available for this.ASk yr basis consultant to check the notes.
ES/TABLE SHM_SEGS
ES/SHM_SEG_SIZE 2048
em/global_area_MB 250
abap/heap_area_total 4000000000
abap/heap_area_dia 2000000000
abap/heap_area_nondia 2000000000
ES/SHM_PROC_SEG_COUNT 16
ES/SHM_MAX_PRIV_SEGS 15
ES/SHM_USER_COUNT 2048
ES/SHM_SEG_COUNT 2048
Need to do a system bounce for the parameter change to take effect.
Regards
Balaji -
Error message from the source system
Hi,
I'm trying to load 0SD_O03 & 0SD_C03 using fullupload.
I have data in source system which I checked in RSA3.
I deleted the init request from the Infopackage.
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Please help!
Thanks,
VishI see a shortdump in BW system with runtime error
MESSAGE_TYPE_X
The current application program detected a situation which
should not occur. Therefore, a termination with a short du
triggered on purpose by the key word MESSAGE (type X).
Hi A.H.P,
It didn't happen to other extractions. I just started with this one. I set up the table in SAP R/3 system and when I tried to do the initial full load in SAP BW, it comes up with the above error.
Thanks,
Vish -
Error message from the source system, Caller 09 contains an error message.
Hi,
Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request. "
Can any body help me out of this situation what to do and how to resolv ethe problem.
Thanks and Regards,.
Taps....Caller 09 is a very common issue - please search the forums before posting....
Arun -
Error occurred in the source system
Hi,
I am receiving the below error while loading data from APO system
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
******On further investigating the error message I get the following Diagnosis and Resolution details.*****
Diagnosis
The sequence for creating time series in LiveCache is:
1. Characteristic value combinations are created which in turn create
planning object in the system
2. The combination of version, planning area, and planning object is
initialized, creating time series in LiveCache. This combination is
so to speak the LiveCache anchor.
This error occurs if
o New characteristic value combinatons have been created for the
master palnning object structure that is assigned to the planning
area, but the time series objects were not created.
System response
Processing cannot continue.
Procedure
There are two methods of creating time series objects for individual
characteristic value combinations:
a) Re-initialize the version without deleting the time series
objects beforehand.
b) Execute the report program /SAPAPO/TS_LCM_PLOB_DELTA_SYNC.
In general SAP recommend that when you generate new characteristic value
combinations, you set the Create time series objects indicator. This
prevents this error from occurring.
Please let me know what I need to do to rectify this error. Please send me the steps to overcome this error.
Regards,
TysonHi tyson,
Has it run good before? if yes, try to restore the source system.
by right click on the source system then choose restore.
It will require you to fill in some information about RFC destination. contact with your basis to have the information about: Target host, Sys no, and Sys ID of your APO system.
hope it help. Give point if you see its helpful.
Chuong Hoang
Maybe you are looking for
-
How do you import a movie from a DVD to my Itunes library?
Hii! I have been using Itunes for 3 months and it just came to me that I want to put a movie that I have on DVD on my ipod. I know that i have to put it in my Itunes first but how do you put your movie in my itunes library?? I have been in all tutori
-
Is it possible to upgrade the CPU or GPU of a Toshiba Notebook?
Many customers would like to upgrade/replace the CPU (Central Processing Unit) and/or GPU (Graphics Processing Unit) in their mobile systems to gain performance. Toshiba does not support or recommend performing modifications on their mobile systems s
-
Issue in creating sales doc wirth reference contract
hi friends, my requirement is to create a sales order with reference to contract.i had tried it by using bapi 'BAPI_SALESORDER_CREATEFROMDAT2' but i am getting message like this Sales dcoument: S SALES_HEADER_IN has been processed successfu
-
Flash with full path link does not work, does anyone know how?
Hey guys do not think many people now needed it, but to kill me and I can not. I need the following: Place a swf with the full path of another server. Until then beauty is only put http://www.outrodominio.com.br/flash/arquivo.swf right? to ai beauty,
-
Managed server startup issue!!!
hi all, i am facing managedserver startup issue i am start the managed server it will up take the 6 min how to reduce the time 1)i am trying differnt ways 1)threaddump 2)GCparamets but no usee can u see the log and give me suugestions below log one p