Conversion from 2013 to 2011

Hi,
can you the attached file from 2013 to 2011 version.
Thank you

Hello,
this is a snapshot and it cannot be converted. But the vi's used are present in Labview 2011 also, so you can apply them yourself.
Best regards,
K
https://decibel.ni.com/content/blogs/kl3m3n
"Kudos: Users may give one another Kudos on the forums for posts that they found particularly helpful or insightful."

Similar Messages

Conversion from 2013 to 2010

helo,
I am writting asking if i could be helped to convert the Vi in the attchment below from 2013 to 2010 version
Thank you in advance
regards ,
jamie11
Attachments:
jameshouseclient.vi ‏251 KB
jamessmarthouse server.vi ‏815 KB
jamessmarthouse server.vi ‏815 KB

This must be a school project...look here: http://forums.ni.com/t5/Version-Conversion/conversion-from-2013-to-2010/m-p/3079848#U3079848
There are only two ways to tell somebody thanks: Kudos and Marked Solutions

Conversion from 2014 to 2011

Hi,
Could someone convert these VI's to LabView 2011?
Solved!
Go to Solution.
Attachments:
Analyseur de trame METAR.vi ‏29 KB

Here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Analyseur de trame METAR.zip ‏15 KB

Convert to labview 2010 or 2011 from 2013

Hi,
Could someone help me converting these llb to LV 2010 or 2011?
Thanks for your help!
Attachments:
CAB_SOAP.zip ‏168 KB

Conversion done here: http://forums.ni.com/t5/Version-Conversion/conversion-from-2013-to-2010/m-p/3027335#U3027335
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Conversion of VIs from LabView 2013 to 2011

Hi,
I would be grateful for conversion of zipped VIs from LabView 2013 to 2011.
Thank You,
Michal
Solved!
Go to Solution.
Attachments:
main VIs.zip ‏38 KB

Here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Attachments:
main VIs 2011.zip ‏27 KB

Getting ÿþ as saved conversations from Lync in Outlook in Office 2013

Hi,
I've been trying to get to the bottom of this and have found similar posts, but no one seems to have an answer.
When I IM someone using Lync 2013, they get a pop up notification but instead of the message they see ÿþ<. Once they open the chat window, they can see my typed text. Occasionally, certain people can't see the first line of my chat, but as
long as they keep the chat window open, they can see everything new I type.
All my conversations that are saved in outlook show ÿþ< for the text and are unreadable. I've disabled the saving of conversations because they have become worthless.
I believe it has to do with BOM but have not been able to find a way to fix this.
If I copy a conversation from the chat window and paste it into Microsoft Word it shows ÿþ<, but if I paste it into notepad the conversation appears.
(I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
I've tried changing the preferred encoding for outgoing messages: to Unicode (UTF-8) in Outlook, but this had no effect and I can't find a similar option in Lync 2013.
(I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
I enabled logging for Lync and the event IDs that come up are 1, 11 and 12, to which I cannot find any information for at the moment.
Any help and or suggestions would be appreciated.

Hi,
Did the issue happen only for you or for multiple users?
Please try to delete Lync User Profile and information on Registry, then repair Office 2013.
The path of Lync User Profile: %UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
The path for information on Registry: HKCU\Software\Microsoft\Office\15.0\Lync\[email protected]
Then test the issue again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Sync old iMessage conversations from iPhone to new iPad & Mac?

I have had my iPhone for a couple years now, and have accumulated a fairly large amount of iMessage conversations from various people. A few days ago, I purchased my first iPad and also updated my Mac to Mountain Lion. By doing so, I now have access to iMessage on three devices in total, whereas before I only had one.
I have managed to setup my devices so that all new iMessages I send and receive are being synced between them. However, is it possible to sync my old iMessage conversations from my iPhone back onto my iPad and Mac?
I would like to do so in order to keep a full record of the past conversations I have had with my contacts.
I have done a bit of research before posting, but the only related topics I found werehttps://discussions.apple.com/message/19095937 andhttps://discussions.apple.com/message/17818920. The former was left unresolved, whereas the latter describes a solution which I am unable to reproduce.
Could anyone shed some light on this for me?

Hi,
For me this was very early on in my Mountain Lion days.
I would now say that you cannot sync iMessages from an iOS device that were sent before your linked any Apple ID with the iPhone Number or added the Mac to the use of the Apple ID.
At the point at which and Apple ID is used on both an iPad and the Mac version of Messages becomes it's "Start date"
The same can be said for adding an Apple ID to an iPhone and the Mac.
On the Mac all messages can be saved if you wish.
This are in the .ichat format which you can send to Mac Buddies and then can open them and read them as if they were the chat (i.e they display as "chats').
There appears to be no way in iTunes to access the iMessages (or SMS ones) on the iPhone.
Someone who knows more about the iOS may be able to tell you if they are accessible another way.
8:52 PM Friday; May 24, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

IMessage won't start conversation from Mac

Hey everyone,
Iv'e been looking for a solution online for this problem iv'e been having, but i couldn't find answers anywhere.
The problem is that for some reason, i can't start a conversation from my mac when trying to send new messages. when i send those messages from my iphone it works, and then i can continue the conversation from my mac.
also, iv'e noticed that it takes a lot of time for messages to "sync" itself with my conversations that i started on my iphone. is there any way to "refresh" imessage (like on mail for example...)???
i verified that my accounts on both devices are the same, that i have the same settings, but still, nothing works.
anyone is having the same problems?? anyone has a solution...?
Thanks,
Tal.

Hi,
So, in Messages main window you have New Message at the top left.
You are entering your Contacts Name in the "To" field or using the Blue + icon > Contacts and selecting the contact.
The name is turning Blue ?
The Text entry field at the bottom also reads iMessage ?
If the name is not Blue then carefully click the downward arrow head at the end of the name.
Select the active iMessage option (highlighted with blue Speech bubble)
Does the name go Blue now ?
I tried testing with my iMessage Account logged out and the setting in the General Section set to Allow IMs and iMessages to "Wake" the app but this did not start the iMessage account when iMessaging from the iPhone
It was only a one off test with the app open but the account logged out which seemed closest to what you describe.
9:26 PM Thursday; February 14, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Deleting a Single Conversation from one Contact

I have to say I find this a real let down with Skype.
It is a breach of users rights to not be able to delete one conversation, and have it removed from all devices used.
I use my Skype 24/7 for work and staying in touch with family, and therefore my history becomes FULL.
Some of the conversations I have I need to keep for work reference, others with family, and non important stuff I need to delete.
It is crazy that this cannot be done, and all you can do is delete your whole history - which is a non option for me, otherwise I would loose things like customer quote details, details for flights etc etc etc.
Also deleting your history deletes all your favourites, and all the groups we have set up, eg Sales / Support etc !!!!
Really stupid and not very efficient at all.
Can someone from Skype PLEASE answer why this has been done as such ?

Why would it be possible to delete a single conversation using Mac and not PC? This thread, in the meantime is from 2013 and the issue has been raised multiple times, yet no response from Skype. The management of the contact list and of information stored in the account is certainly as fundamental as being able to throw away old telephone bills and account statements. The necessity to maintain messy and irrelevant has never been explained by skype that I can find. Please change this, as only being able to "hide" a conversation leaves one with an ominous feeling of Big Brother is Watching You.
Thank you.

Page numbers incorrect after conversion from Excel to pdf

Page numbers incorrect after conversion from Excel to pdf
""This above link (thread:834599) is from a case back in 2011 that claims to solve this problem, but it does not solve this problem. I think that customer only cared about having continuous page numbering, not discrete page numbering per sheet.
========================
I still have this issue in Acrobat XI and MS Office Professional Plus 2010. I keep upgrading to no avail. This regression has resulted in a huge time drain for me. If you fixed it, please explain how I can get my hands on the resolution.
Previous versions of Excel and Adobe Acrobat enabled flexibility around the "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) token, depending on context and usage. The "# of pages" token could represent EITHER the number of pages in the workbook OR the number of pages in the tab/sheet, depending on how you generated the PDF:
You could select "Selected Sheets" and then select all or some of the individual sheets in the workbook, and the PDF would honor the discrete numbering of each of the sheets, so the first page of each sheet was p1 and the "# of pages" was the number of pages in the sheet; not the number of pages in the workbook; or
You could select "Entire Workbook" and the PDF would honor continuous page numbers across all sheets, as a single document.
Now, it only honors the total number of pages in the workbook, regardless of the method you use to publish to PDF: saving as PDF, printing to PDF, using "createPDF" from Acrobat plugin to Excel's menu ribbon; selecting all sheets, some sheets, or Entire Workbook; automatic First page number or "1" under Page Setup > Page> First page number. (This last option, btw, does restart every sheet at p1, but it hardly makes sense if the total number of pages is still the total number in the workbook instead of the number in the sheet.)
I spent a lot of time trying each which way that the blog posts recommended and have tried this on multiple versions of Excel and Acrobat now.
NONE of these time-consuming experiments gave me what I wanted.They all insist that "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) is the total number of pages in the workbook or the total number of pages in the selected sheets combined.
The numbering are correct in Excel Page Layout.
The same issue happens when using LibreOffice calc. (Although, I never tested with Libre Office before, so I don't know that it ever worked).
The workaround now is to create PDF for each spreadsheet one at a time, and then compile them using the Acrobat combine/binder feature. All alternatives are extremely time consuming and tedious. It used to be automatic. This is a major regression that has gone untreated for over a year now, maybe two years.
My task takes infinitely more time to complete than it did with previous versions of Acrobat. That means that days are added to my project, when the functionality used to enable a quick pdf generation that was ready for review, now I have to do this very manual time-consuming set of steps to generate a draft. As the project has grown and more tabs are added, my pdf-generation task takes that much longer. We require lots of drafts. It used to be easy and fast. Now it is hard and time-consuming.
In my opinion, the problem is not Excel; it is Acrobat because it was introduced with an upgrade in Acrobat, not an upgrade in Excel. The problem was introduced in Acrobat 9 or 10. Please provide a patch or add-on or something.

If you are setting up the page numbers in Excel, the resulting PDF would display the the page numbers created in Excel. On Excel 2010 support page, (http://office.microsoft.com/en-us/excel-help/insert-and-remove-page-numbers-on-worksheets- HA010342619.aspx#BM2) is stated the following "tip" which indicates by default Excel 2010 starts numbering each tab with 1. Exel's workaround tip is below -
Set a different number for the starting page
Tip To number all of the worksheet pages in a workbook sequentially, first add page numbers to all worksheets in a workbook, and then use the following procedure to begin the page number for each worksheet with the appropriate number. For example, if your workbook contains two worksheets that with both be printed as two pages, you would use this procedure to begin the page numbering for the second worksheet with the number 3.
On the Page Layout tab, in the Page Setup group, click the Dialog Box Launcher next to Page Setup.
On the Page tab, in the First page number box, type the number that you want to use for the first page.
Tip To use the default numbering system, type Auto in the First page number box.
Also helpful in the same section is the note on viewing page numbers. To see if the page numbering dilemma originates in Excel make sure you are using the Page Layout View see below:
Hide All
If you want numbers shown on pages when you print a worksheet you can insert page numbers in the headers or footers of the worksheet pages. Page numbers that you insert are not displayed on the worksheet in Normal view — they are shown only in Page Layout view and on the printed pages.
Overall it may be easier not to create the page numbers in Excel but instead create then in Acrobat using the Headers and Footers option in Acrobat. I hope this helps - it sounds like a frustrating issue you are experiencing.

Convert from 2013 to 2012 files

any idea how to convert from 2013 to 2012 ??
thanks alot
Solved!
Go to Solution.

In LV2013 do File...Save For Previous Version.
I don't know if this is available for all LV version (I have Pro). You can also post your vi to the version conversion board
http://forums.ni.com/t5/Version-Conversion/bd-p/VersionConversion
Ben64

Convert from 2013 to 2012

From 2013
To 2012
Turns out my school has a lesser version than I do. I need to work on this at school.
Solved!
Go to Solution.
Attachments:
Expression 1.vi ‏32 KB

Here you go.
For future reference, these conversion requests belong in the Version Conversion board. I have asked the moderator to move this thread to that board.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Attachments:
Expression 1.zip ‏18 KB

Conversion from varchar(20) - to_date

HI if any one could help me on the below query please,
SCEANRIO IS THIS:
conversion from varchar(20) - > to_date
EX: SUSR4 = VARCHAR(20)
SUSR4 = 25-MAY-2011
i need to convert this varcahar(20) to to_date as follows
Result coms..: SUSR4 = to_date('25/05/2011','dd/mm/yyyy')
and i want use this filed below condition
SUSR4 >= to_date('20/05/2011','dd/mm/yyyy')
NOTE: please revert back to me with the result . tkx in advance.
can u reply this mail id.. [email protected]

HI FRIEND....
BELOW MENTIONED THE FORMAT I TRIED BUT IM GETTING ERROR MESSAGE "DATE FORMAT NOT RECOGNIZED"....
BELOW QUERY ONLY IM TRYING TO RUN
select      od.SKU,
            s.DESCR as "DESCRIPTION",
            lx.LOT,
            LX.LOC,
            (od.SHIPPEDQTY+od.QTYPICKED) as Qty,
            od.SUSR4 as PalletID,
            (select to_char(rd.ADDDATE,'mm/dd/yyyy') from receiptdetail rd where rd.TOID in (od.SUSR4)
            and trunc(rd.ADDDATE)>= to_date('26/04/2011','dd/mm/yyyy') and rownum=1) as RECEIVEDDATE,
            od.SUSR5 as Shipdate,
            to_char(o.ACTUALSHIPDATE,'mm/dd/yyyy') as ACTUALSHIPDATE,
            (SELECT R.CONTAINERKEY FROM RECEIPT R LEFT OUTER JOIN RECEIPTDETAIL RD ON RD.RECEIPTKEY=R.RECEIPTKEY
             WHERE RD.TOID IN (OD.SUSR4) AND RD.QTYRECEIVED>0
             AND TRUNC(RD.ADDDATE) >= TO_DATE('26/04/2011','DD/MM/YYYY') AND ROWNUM=1) AS CONTAINERKEY
from        orderdetail od ,orders o , sku s,lotxlocxid lx
where       od.sku=s.sku and lx.ID=od.SUSR4
            and od.ORDERKEY=o.ORDERKEY
            and s.SKU='AAFESDD'
            --and o.ACTUALSHIPDATE <= to_date('30/05/2011','dd/mm/yyyy')
            AND TO_DATE(OD.SUSR5,'DD/MMM/YYYY')<=TO_DATE('30/05/2011','dd/mm/yyyy')THANKS,
PRABU AMMAIAPPAN
Edited by: BluShadow on 31-May-2011 12:27
added {noformat}{noformat} tags. Please read {message:id=9360002} for info on how to format your code and ask a question.
Also please note that UPPERCASE is considered shouting and thus is not polite on the forums.

Project Conversion from 11.03 to R12- need help

Hi All,
I need some information regarding conversion from 11.03 to R12 along with Capital Project's conversion, do we need to take care Asset Assignment and Assets information at the time of Project Conversion. Iam doing Project and Task conversion different. Is there any good mapping document or Conversion FD, if any body have please send my mail ID. [email protected]
Thanks for your help.
Thanks,
Srini..

Usually only Open Invoices and Unapplied Receipts are migrated from Old system to New Instance.
Post Migration Reconciliation shall be tough in that scenario. Reconsider/Rediscuss with Client.
Migration can be done using APIs or Custom Scripts using Standard Interfaces.
Hope this is helpful
Regards,
Sridhar

I bought a new Mac Pro from an Apple store, it was sold as factory sealed, but it's reconditioned - it has some strangers entire photo,library from 2003 to 2011 in the trash bin.

. I bought a new Mac Pro from an Apple store 2 days ok, it was sold as factory sealed, but it's reconditioned - it has some strangers entire photo,library from 2003 to 2011 in the trash bin.
I was bought a Mac book pro as a birthday gift from the Apple Store in Leicester, after completing the initial set up procedure, I noticed that the trash bin was full of some one's entire photo collection from 2003 to 2011.
This is entirely unacceptable for Apple: How long have Apple been fobbing of consumers who believe they were genuinely purchasing a 'new' Mac book?
How is it that I have someones entire photo collection on my 'branch new Mac Book Pro' - these photos included wedding photo's, birthday celebrations, family celebrations and children. Its a serious breach of data protection, it's an invasion of some poor persons privacy and private photo collection. What concerns me the most, is what could have happened if those photo's had fallen into the wrong hands. We managed to trace, locate and contact the person who the photo's belong to within 10 mins using information taken from their wedding album.
Understandably these people are also very distressed that their personal photos are on my brand new Mac Book pro.
I would like details of who to contact in regards this incident.

Katdee22 wrote:
. I bought a new Mac Pro from an Apple store 2 days ok, it was sold as factory sealed, but it's reconditioned - it has some strangers entire photo,library from 2003 to 2011 in the trash bin.
Return to Place of Purchase.
Katdee22 wrote:
I would like details of who to contact in regards this incident.
Contact AppleCare.
Apple Contact USA > http://www.apple.com/contact/

Conversion from 2013 to 2011

Similar Messages

Maybe you are looking for