Conversion from 5.1 to 2013

Hi, could anyone please convert these four files from 5.1 to 2013?
Thanks in advance
Solved!
Go to Solution.
Attachments:
lv 5.1 to 2013.zip ‏90 KB

Mass compiled in 8.2.1, which you can open with 2013.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Attachments:
lv 5.1 to 2013.zip ‏71 KB

Similar Messages

Getting ÿþ as saved conversations from Lync in Outlook in Office 2013

Hi,
I've been trying to get to the bottom of this and have found similar posts, but no one seems to have an answer.
When I IM someone using Lync 2013, they get a pop up notification but instead of the message they see ÿþ<. Once they open the chat window, they can see my typed text. Occasionally, certain people can't see the first line of my chat, but as
long as they keep the chat window open, they can see everything new I type.
All my conversations that are saved in outlook show ÿþ< for the text and are unreadable. I've disabled the saving of conversations because they have become worthless.
I believe it has to do with BOM but have not been able to find a way to fix this.
If I copy a conversation from the chat window and paste it into Microsoft Word it shows ÿþ<, but if I paste it into notepad the conversation appears.
(I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
I've tried changing the preferred encoding for outgoing messages: to Unicode (UTF-8) in Outlook, but this had no effect and I can't find a similar option in Lync 2013.
(I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
I enabled logging for Lync and the event IDs that come up are 1, 11 and 12, to which I cannot find any information for at the moment.
Any help and or suggestions would be appreciated.

Hi,
Did the issue happen only for you or for multiple users?
Please try to delete Lync User Profile and information on Registry, then repair Office 2013.
The path of Lync User Profile: %UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
The path for information on Registry: HKCU\Software\Microsoft\Office\15.0\Lync\[email protected]
Then test the issue again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Sync old iMessage conversations from iPhone to new iPad & Mac?

I have had my iPhone for a couple years now, and have accumulated a fairly large amount of iMessage conversations from various people. A few days ago, I purchased my first iPad and also updated my Mac to Mountain Lion. By doing so, I now have access to iMessage on three devices in total, whereas before I only had one.
I have managed to setup my devices so that all new iMessages I send and receive are being synced between them. However, is it possible to sync my old iMessage conversations from my iPhone back onto my iPad and Mac?
I would like to do so in order to keep a full record of the past conversations I have had with my contacts.
I have done a bit of research before posting, but the only related topics I found werehttps://discussions.apple.com/message/19095937 andhttps://discussions.apple.com/message/17818920. The former was left unresolved, whereas the latter describes a solution which I am unable to reproduce.
Could anyone shed some light on this for me?

Hi,
For me this was very early on in my Mountain Lion days.
I would now say that you cannot sync iMessages from an iOS device that were sent before your linked any Apple ID with the iPhone Number or added the Mac to the use of the Apple ID.
At the point at which and Apple ID is used on both an iPad and the Mac version of Messages becomes it's "Start date"
The same can be said for adding an Apple ID to an iPhone and the Mac.
On the Mac all messages can be saved if you wish.
This are in the .ichat format which you can send to Mac Buddies and then can open them and read them as if they were the chat (i.e they display as "chats').
There appears to be no way in iTunes to access the iMessages (or SMS ones) on the iPhone.
Someone who knows more about the iOS may be able to tell you if they are accessible another way.
8:52 PM Friday; May 24, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

IMessage won't start conversation from Mac

Hey everyone,
Iv'e been looking for a solution online for this problem iv'e been having, but i couldn't find answers anywhere.
The problem is that for some reason, i can't start a conversation from my mac when trying to send new messages. when i send those messages from my iphone it works, and then i can continue the conversation from my mac.
also, iv'e noticed that it takes a lot of time for messages to "sync" itself with my conversations that i started on my iphone. is there any way to "refresh" imessage (like on mail for example...)???
i verified that my accounts on both devices are the same, that i have the same settings, but still, nothing works.
anyone is having the same problems?? anyone has a solution...?
Thanks,
Tal.

Hi,
So, in Messages main window you have New Message at the top left.
You are entering your Contacts Name in the "To" field or using the Blue + icon > Contacts and selecting the contact.
The name is turning Blue ?
The Text entry field at the bottom also reads iMessage ?
If the name is not Blue then carefully click the downward arrow head at the end of the name.
Select the active iMessage option (highlighted with blue Speech bubble)
Does the name go Blue now ?
I tried testing with my iMessage Account logged out and the setting in the General Section set to Allow IMs and iMessages to "Wake" the app but this did not start the iMessage account when iMessaging from the iPhone
It was only a one off test with the app open but the account logged out which seemed closest to what you describe.
9:26 PM Thursday; February 14, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

On-Site Conversation Translator and Lync Server 2013

To Whom It May Concern,
I'm looking into deploying Lync Server 2013 Standard and I was curious as to whether there is a way to install the Conversation Translator as a service on-site. Meaning not using the service on the Internet. Similar to IBM's Websphere Application
Server where I can install a local instance on a closed network, have Sametime Connect point to that service, and translate the IM conversation.
I remember talking to a few MS folks a couple years ago, and they mentioned that it was going to be available as an add-on (or component) of Lync Server. Is this possible?
Thanks,
Brendan

There is a Client side plugin, take a look at:
http://channel9.msdn.com/posts/Lync-2013-Translate-a-conversation-from-one-language-to-another-in-real-time-part-one
http://voipnorm.blogspot.ca/2012/11/lync-2013-enabling-conversation.html
http://code.msdn.microsoft.com/office/Lync-2013-Translate-a-a849e513
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

Can only access emails through OWA after migration from exchange 2007 to 2013

can only access emails through OWA after migration from exchange 2007 to 2013, in other words unable to access mails through outlook or from other Applications services.
needed RCA ... plz help..

Hi,
From your description, you can send and receive messages only when you use OWA after migration from Exchange 2007 to Exchange 2013. If I have misunderstood your concern, please let me know.
In your case, I recommend you create a new test mailbox in your Exchange 2013 and check if you can send and receive messages on Outlook. If yes, it is recommended to create a new profile to solve this issue.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Issue moving remote user from exchange 2007 to 2013

have moved over 60 people so far from exchange 2007 to 2013, it was going well with no major problems.
during migration I have created a DNS setting called legacy.mydomain.com, and it points to the old exchange server, while mail.mydomain.com points to the new exchange server.
outlook was working connecting to both servers, and OWA was working on both servers.
couple of remote users who connect via SSL-VPN and outlook 2010 had issues connecting, but as soon as I moved them to 2013 exchange they connected without vpn using outlook anywhere.
but - I have one remote user who even though the mailbox move to the new 2013 server was successful, their outlook still points to the 2007 exchange server.
if I try creating a new profile in outlook 2013, it fails because it cannot contact exchange server, even when ssl-vpn is running.
when I started troubleshooting I found lots of spyware on his laptop, symantec had been blocking some trojans, obviously he had downloaded something he shouldnt have.
could this have caused my outlook connectivity issue?
I ran malawarebytes, and it shows clean now, but still unable to get his outlook to connect.
I had thought about moving his mailbox back to the old server, seeing if it works on outlook, then moving it to the new one again.
any suggestions?

I had thought about moving his mailbox back to the old server, seeing if it works on outlook, then moving it to the new one again.
Hi,
Have you done this step? Sometimes moving mailbox to another database can auto-fix problems.
According to your description, I know that all migrated mailboxes work well except a specific user. I notice that the user's laptop has a lots of spyware, and symantec has been clocking some trojans.
Please try to logon OWA to check whether this user works.
If works in OWA, it seems that the mailbox has been migrated to 2013 successfully.
Generally, re-creating profile can fix this issue. Unfortunately, you have tried it and failed.
Please try to run Outlook under safe mode to avoid AVs and add-ins.
Thanks
Mavis Huang
TechNet Community Support

How to migrate from exchange 2007 to 2013 step by step tutorials please

Hi
I am running Windows Server 2008 standard, with exchange 2007 SP2 on it.
We have 800 mailbox in total
Our domain controllers are
Win2012 R2 and I would like to upgrade to Exchange 2013 on Windows server 2012 R2.
I am running a VM, on VMware environment, so my Windows 2012 R2 is a VM.
Is there a website or document that explains in detail, step by step how to upgrade from 2007 to 2013.
I currently only have 1 exchange server 2007, with all the roles on the one server. I would like to keep that same as
well with exchange 2013.
Thanks

Exchange server deployment assistant is always a good service provider to achieve this task as it simply ask few questions about your current environment and proceed further accordingly.
You can refer to this blog explained by technet team that will assist you further to gather more information in depth : http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
Moreover, to avoid the interruptions and proceed a hassle-free migration from exchange 2007 to 2013, this application (http://www.exchangemigrationtool.com/) could also be a good approach to accomplish
migration task in more secure way.

Migration from Exchange 2007 to 2013 gives error "Failed to communicate with the mailbox database'

I have been trying to migrate several databases from Exchange 2007 to Exchange 2013. The migration started successfully, and many of the mailboxes moved successfully (about 70). The remaining mailboxes, failed. Looking deeper, we found a few issues; The
two 2013 Mailbox servers were on different versions. The Server had run out of disk space, and the NIC drivers needed to be updated.
Now when we try to migrate a mailbox that had failed in the earlier batch, we get the following error:
Data migrated:
Migration rate:
Error:
MigrationTransientException: Failed to communicate with the mailbox database. --> Failed to communicate with the mailbox database. --> MapiExceptionNetworkError: Unable to make connection to the server. ‎(hr=0x80040115, ec=-2147221227)‎ Diagnostic
context:    ......    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 501    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0    Lid: 11672   dwParam:
0x0 Msg: EEInfo: NumberOfParameters: 4    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[1]: Unicode string: <Server
FQDN>    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[2]: Long val: 3749909585    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[3]: Long val: 382312662    Lid: 45169   StoreEc: 0x824
Lid: 50544   ClientVersion: 15.0.847.32    Lid: 52080   StoreEc: 0x824         Lid: 44273      Lid: 49064   dwParam: 0x1    Lid: 37288
StoreEc: 0x6AB         Lid: 49064   dwParam: 0x2    Lid: 59431   EMSMDB.EcDoConnectEx called [length=203]    Lid: 51239   EMSMDB.EcDoConnectEx exception [rpc_status=0x6D9][latency=0]
Lid: 62184      Lid: 16280   dwParam: 0x0 Msg: EEInfo: ComputerName: n/a    Lid: 8600    dwParam: 0x0 Msg: EEInfo: ProcessID: 3460    Lid: 12696   dwParam: 0x0 Msg: EEInfo:
Generation Time: 0414-04-07T16:32:03.2100000Z    Lid: 10648   dwParam: 0x0 Msg: EEInfo: Generating component: 2    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 1753    Lid: 9624
dwParam: 0x0 Msg: EEInfo: Detection location: 501    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 4    Lid: 8856
dwParam: 0x0 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[1]: Unicode string: <Server FQDN>    Lid: 12952   dwParam: 0x0 Msg: EEInfo:
prm[2]: Long val: 2767313664    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[3]: Long val: 382312662    Lid: 59505   StoreEc: 0x824         Lid: 50544   ClientVersion:
15.0.847.32    Lid: 52080   StoreEc: 0x824         Lid: 36081      Lid: 51152      Lid: 52465   StoreEc: 0x80040115
Lid: 60065      Lid: 33777   StoreEc: 0x80040115    Lid: 59805      Lid: 52487   StoreEc: 0x80040115    Lid: 19778      Lid: 27970
StoreEc: 0x80040115    Lid: 17730      Lid: 25922   StoreEc: 0x80040115
All of the issues listed above have been corrected, and all of the databases are mounted. Users are able to send and receive mail, but I can not migrate mail using the Migration Batch utility.
The destination server is a Hyper-V Guest running Server 2012, SP1, and Exchange 2013
The Source Server is Running Exchange 2007.
I have tried doing a test move to another destination server that is also Server 2012, and Exchange 2013, and the migration also failed.
I would appreciate any help you can give me!
Thanks,
Jon

Any update if you have resolved the issue.
Not similar, but this thread can be helpful while you migrate the mailboxes from exchange 2007 to 2013. Please check :http://social.technet.microsoft.com/Forums/exchange/en-US/721f0ae4-623a-4b02-adaf-f561d86c0426/move-mailboxes-and-public-folders-from-exchange-2007-to-exchange-2013?forum=exchangesvrdeploy&prof=required

Project Conversion from 11.03 to R12- need help

Hi All,
I need some information regarding conversion from 11.03 to R12 along with Capital Project's conversion, do we need to take care Asset Assignment and Assets information at the time of Project Conversion. Iam doing Project and Task conversion different. Is there any good mapping document or Conversion FD, if any body have please send my mail ID. [email protected]
Thanks for your help.
Thanks,
Srini..

Usually only Open Invoices and Unapplied Receipts are migrated from Old system to New Instance.
Post Migration Reconciliation shall be tough in that scenario. Reconsider/Rediscuss with Client.
Migration can be done using APIs or Custom Scripts using Standard Interfaces.
Hope this is helpful
Regards,
Sridhar

Since downloading Firefox 4, I am having problems archiving gmail conversations from my inbox view. Also, when I go to enter a new event in google calendar, I now have to click the cursor in the box to type the event (it used to let me just start typing).

Since downloading Firefox 4, I am having problems archiving gmail conversations from my inbox view (either one or several conversations) as it says "No Conversations Selected" when I have selected one or several. Also, when I go to enter a new event in google calendar, I have to click the cursor in the box to type the event (it used to let me just start typing) or else it flips out and starts jumping to day view or another month. Does anyone know how to fix either of these?

I have had this problem; but while trying to fix another problem, I reset my preferences for Firefox and it fixed this problem as well. To reset preferences, follow this link: http://support.mozilla.com/en-US/kb/Resetting%20preferences

How can I print a text message conversation from my iPhone? Not using screenshots.

How can I print a text message conversation from my iPhone? Not using screenshots. It's around 500 messages so screenshots is not a option.

Yes, you can delete from iphone:
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf
It is covered in the manual.
Page 172:
"Delete a podcast: In the Podcasts list in iPod, swipe left or right over the podcast, then
tap Delete. "

Page numbers incorrect after conversion from Excel to pdf

Page numbers incorrect after conversion from Excel to pdf
""This above link (thread:834599) is from a case back in 2011 that claims to solve this problem, but it does not solve this problem. I think that customer only cared about having continuous page numbering, not discrete page numbering per sheet.
========================
I still have this issue in Acrobat XI and MS Office Professional Plus 2010. I keep upgrading to no avail. This regression has resulted in a huge time drain for me. If you fixed it, please explain how I can get my hands on the resolution.
Previous versions of Excel and Adobe Acrobat enabled flexibility around the "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) token, depending on context and usage. The "# of pages" token could represent EITHER the number of pages in the workbook OR the number of pages in the tab/sheet, depending on how you generated the PDF:
You could select "Selected Sheets" and then select all or some of the individual sheets in the workbook, and the PDF would honor the discrete numbering of each of the sheets, so the first page of each sheet was p1 and the "# of pages" was the number of pages in the sheet; not the number of pages in the workbook; or
You could select "Entire Workbook" and the PDF would honor continuous page numbers across all sheets, as a single document.
Now, it only honors the total number of pages in the workbook, regardless of the method you use to publish to PDF: saving as PDF, printing to PDF, using "createPDF" from Acrobat plugin to Excel's menu ribbon; selecting all sheets, some sheets, or Entire Workbook; automatic First page number or "1" under Page Setup > Page> First page number. (This last option, btw, does restart every sheet at p1, but it hardly makes sense if the total number of pages is still the total number in the workbook instead of the number in the sheet.)
I spent a lot of time trying each which way that the blog posts recommended and have tried this on multiple versions of Excel and Acrobat now.
NONE of these time-consuming experiments gave me what I wanted.They all insist that "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) is the total number of pages in the workbook or the total number of pages in the selected sheets combined.
The numbering are correct in Excel Page Layout.
The same issue happens when using LibreOffice calc. (Although, I never tested with Libre Office before, so I don't know that it ever worked).
The workaround now is to create PDF for each spreadsheet one at a time, and then compile them using the Acrobat combine/binder feature. All alternatives are extremely time consuming and tedious. It used to be automatic. This is a major regression that has gone untreated for over a year now, maybe two years.
My task takes infinitely more time to complete than it did with previous versions of Acrobat. That means that days are added to my project, when the functionality used to enable a quick pdf generation that was ready for review, now I have to do this very manual time-consuming set of steps to generate a draft. As the project has grown and more tabs are added, my pdf-generation task takes that much longer. We require lots of drafts. It used to be easy and fast. Now it is hard and time-consuming.
In my opinion, the problem is not Excel; it is Acrobat because it was introduced with an upgrade in Acrobat, not an upgrade in Excel. The problem was introduced in Acrobat 9 or 10. Please provide a patch or add-on or something.

If you are setting up the page numbers in Excel, the resulting PDF would display the the page numbers created in Excel. On Excel 2010 support page, (http://office.microsoft.com/en-us/excel-help/insert-and-remove-page-numbers-on-worksheets- HA010342619.aspx#BM2) is stated the following "tip" which indicates by default Excel 2010 starts numbering each tab with 1. Exel's workaround tip is below -
Set a different number for the starting page
Tip To number all of the worksheet pages in a workbook sequentially, first add page numbers to all worksheets in a workbook, and then use the following procedure to begin the page number for each worksheet with the appropriate number. For example, if your workbook contains two worksheets that with both be printed as two pages, you would use this procedure to begin the page numbering for the second worksheet with the number 3.
On the Page Layout tab, in the Page Setup group, click the Dialog Box Launcher next to Page Setup.
On the Page tab, in the First page number box, type the number that you want to use for the first page.
Tip To use the default numbering system, type Auto in the First page number box.
Also helpful in the same section is the note on viewing page numbers. To see if the page numbering dilemma originates in Excel make sure you are using the Page Layout View see below:
Hide All
If you want numbers shown on pages when you print a worksheet you can insert page numbers in the headers or footers of the worksheet pages. Page numbers that you insert are not displayed on the worksheet in Normal view — they are shown only in Page Layout view and on the printed pages.
Overall it may be easier not to create the page numbers in Excel but instead create then in Acrobat using the Headers and Footers option in Acrobat. I hope this helps - it sounds like a frustrating issue you are experiencing.

I can´t sync iCal events written in the iphone4 to the macbook ical, but conversely from macbook to iphone there´s no problem, can somebody help me?

I can´t sync iCal events written in the iphone4 to the macbook ical, but conversely from macbook to iphone there´s no problem, can somebody help me?

Thanks for your answer! I tried as you say, erase the Sync History, but now does not sync any calendar, only displays the birthday ...do not know whatelse to try.

Conversion from string "20041023 " to type 'Date' is not valid.

Hi ,
I have a table with one of the column(EmpHiredate) datatype is char(10). It has value like "20141023". I need to display this value as date format(dd/mm/yyyy) in report.
Following methods i tried in textbox expression but no luck.
=Format(Fields!EmpHireDate.Value,"dd/MM/yyyy")
=Cdate(Fields!EmpHireDate.Value)
Error:
[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "20041023 " to type 'Date' is not valid.
Is it possible to convert string to date using SSRS textbox expression ? Can anyone help me with the solution.
Thanks,
Kittu

Hi Jmcmullen,
Found one more issue on the same. I have one value like "00000000" for the column(EmpHiredate)
, when i use above expression values(ex:"20141023")
are displaying in dd/MM/yyyy format in report except value like "00000000" and giving following error:
[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "0000/00/00" to type 'Date' is not valid.
Even i tried to pass its original value("00000000") as below but no luck.
=IIF(Fields!EmpHireDate.Value = "00000000","00000000",Format(CDATE(MID(Fields!EmpHireDate.Value,1,4) + "/" + MID(Fields!EmpHireDate.Value,5,2) + "/" + MID(Fields!EmpHireDate.Value,7,2)),"dd/MM/yyyy"))
Also tried this:
=IIF(Fields!EmpHireDate.Value = "00000000","2000/10/21",Format(CDATE(MID(Fields!EmpHireDate.Value,1,4) + "/" + MID(Fields!EmpHireDate.Value,5,2) + "/" + MID(Fields!EmpHireDate.Value,7,2)),"dd/MM/yyyy"))
Please Suggest.
Thanks ,
Kittu

Conversion from 5.1 to 2013

Similar Messages

Maybe you are looking for