Conversion from LabVIEW 2011 to 8.2

Dear All
Can any body help me to convert the attached file from LabVIEW 2011 to LabVIEW 8.2.
Kind Regards
Muhammad Irfan
Solved!
Go to Solution.
Attachments:
LabVIEW 6281-40 Replace.vi ‏76 KB

This is what the Version Conversion board is for.  But here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
LabVIEW 6281-40 Replace.vi ‏99 KB

Similar Messages

  • Convert from LabVIEW 2011 to LabVIEW 9.0

    Please convert from LabVIEW 2011 to LabVIEW 9.0
    Attachments:
    Watlow Vis.zip ‏76 KB

    Looks like somebody forgot to attach the zip file.  Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Watflow.zip ‏57 KB

  • Downconvert from LabView 2011 to 2009

    Hi !
    Can anyone convert these VIs (attached file) from Labview 2011 to LabView 2009 ?
    Thanks a lot.
    DMONS
    Solved!
    Go to Solution.
    Attachments:
    LCC25 driver for LabView 2011.zip ‏4308 KB

    Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    LCC25 driver for LabView 2009.zip ‏4230 KB

  • Restarting PXI RT from Labview 2011 64 bit

    I have a customer trying to issue a restart command to a PXI-RT system from Labview 2011 64 bit.  He says the command doesn't work.
    I currently don't have 64bit so I can't test it very well right now.
    Is this something anyone else has tried or experienced?
    Thanks,
    Josh
    G Systems
    Certified LabVIEW Architect

    The real-time module is not supported for 64-bit LabVIEW. As a work around, you could install 32-bit LabVIEW onto your 64-bit OS. This should solve your customer's issue. 
    http://digital.ni.com/public.nsf/allkb/71E9408E6DE​AD76C8625760B006B6F98?OpenDocument
    Ben D.
    Applications Engineer
    National Instruments

  • Conversion from Labview 12 to Labview 2011

    This an example file I downloaded from the tutorial but it's only available in LabView 12. I would like to see the example they provided in Labview 2011. Any help would be appreciated. Thank You!
    Sorry, there were multiple files and it was compiled into a zip file.
    Or can someone teach me to convert it?
    Attachments:
    heart_rate_monitor_example.zip ‏182 KB

    Here you go
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Heart Rate Monitor Project.zip ‏146 KB

  • Conversion from LabVIEW 2012 to 8.2

    Dear All
    Can any body help me to convert the attached file from LabVIEW 2012 to LabVIEW 8.2. Please send the file in doc or pdf as well.
    Kind Regards
    Muhammad Irfan
    Solved!
    Go to Solution.
    Attachments:
    PVT - Mathscript Node.vi ‏83 KB

    Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    PVT - Mathscript Node.vi ‏90 KB

  • Labview 2013 missing smtp VIs from Labview 2011

    We are upgrading to LabView 2013 and any VI that we open that uses SMTP is broken. It seems that NI updated the SMTP functionality but do we have to rewrite every VI that was using SMTP to mail emails from our applications? Are the old 2011 VIs avalable in 2013? Two that we use a lot are "SMTP Send Message.vi" and "SMTP Send File.vi". Where can we find these and any others for LabView 2013?

    0utlaw wrote:
    It appears that they've been replaced with the SMTP Email VIs available in Data Communication>>Protocols>>SMTP Email - there's .......  The old functions are still present at <root>\National Instruments\LabVIEW 2013\vi.lib\Utility\SMTP, but don't appear in the palettes.   
    That's actually where I went to look for my SMTP e-mails in LV 2012.  The VI hierarchy path for these VI's is LabVIEW 2012\vi.lib\Utility\SMTP\smtpeml.llb  I thought those were the VI's the original poster was looking for and not finding.
    0utlaw wrote:
    - there's even a nifty-looking Send Email express VI I wasn't aware of.   
    I haven't seen that in 2012.  Maybe that is a new addition to LV2013.

  • Downconver​sion from LabVIEW 2011 to 2010

    Please help convert to 2011 project to 2010. Thanks!
    Attachments:
    TestSolution.zip ‏320 KB

    The link at the top of the LabVIEW board is for the Version Conversion That is where you need to post your request.

  • Open vi reference conversion from Labview 6 to Labview 2014

    Is there a way that someone can help me convert this VI written in Labview 6.1  so that I can work en EXE in Labview 2014.
    I succed to open this vi from 6.1 to 2014 but it does not run. The open vi reference those not work in exe program. Someone know how I can  replace that function...
    Thanks!
    Solved!
    Go to Solution.
    Attachments:
    to convert 2104.zip ‏17 KB

    Error 7 is File Not Found.  So your dynamically called VI is not in your executable.
    In the build spec for the executable in your project, there is a section for "Source Files".  On of the options for the VIs is "Always Include".
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Conversion from labview 9 to labview 8.2

    Hi, can you convert those tow files for me? i have labview 8.2 and the files are in labview 9. thank you
    Solved!
    Go to Solution.
    Attachments:
    Agilent 6612C Voltage Controller.vi ‏42 KB
    Agilent 6612C Voltage ControllerMOD1InPlace.vi ‏13 KB

    Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Agilent 6612C Voltage ControllerMOD1InPlace.vi ‏17 KB
    Agilent 6612C Voltage Controller.vi ‏59 KB

  • Conversion from LabVIEW 2014 to LabVIEW 2012

    Couls someone convert me this file from LB 2014 to the 2012 version, please?
    Solved!
    Go to Solution.
    Attachments:
    Ejercicio Optativo.vi ‏38 KB

    Saved for 2012.
    Adam
    CLD & CTD
    Attachments:
    Ejercicio Optativo.vi ‏27 KB

  • Request for Conversion from labview 4 to labview 2013

    Dear Support,
    Could you please update these vi to be readable by Labview 2013?
    Thank you in advance, Mary

    Mass compiled in 8.2.1, which you can open with 2013.
    One of the VIs kept crashing my LabVIEW, so it is not included in this zip file.

  • Conversion from labview 2012 to 2010

    Hi there. Could someone convert this vi's to 2010 compatible?
    Thanks
    Attachments:
    heart_rate_monitor_example.zip ‏182 KB

    HI, Here you go.
    You can verify that it works correctly.
    Jonathan Cruz
    CHALLENGER
    K U D O S __ B I E N V E N I D O S
    Attachments:
    Heart Rate Monitor Project Folder.zip ‏144 KB

  • Down convert labview 2011 to 2009

    Hi,
    I have a series of VIs that I made for my mechatronics honours thesis project. However, when tested on the target PC, I discovered that it has version 9.0, whereas the VIs are version 11.0, hence the request for a conversion. I really appreciate any help,
    Thank-you
    Allan
    (The VIs are in the attached zip file)
    Solved!
    Go to Solution.
    Attachments:
    TrekFunctionGenerator.zip ‏379 KB

    can anyone do the downconversion from labview 2011 to labview 2009 for the following driver.
    THanks in advance
    Attachments:
    mk1000(USB)2.3-profile(labview2011).zip ‏548 KB

  • Conversion of VIs from LabView 2013 to 2011

    Hi,
    I would be grateful for conversion of zipped VIs from LabView 2013 to 2011.
    Thank You,
    Michal
    Solved!
    Go to Solution.
    Attachments:
    main VIs.zip ‏38 KB

    Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Attachments:
    main VIs 2011.zip ‏27 KB

Maybe you are looking for

  • Cross references

    How can we use cross references on pages

  • While doing pricing determination procedure in ovvkk

    while doing pricing procedure process i.e., creating condition tables, accseques, types and finally assigning in ovkk, is there a necessary to declare the condition type or it directly takes it, another thing do we require  a condition table for PR00

  • Erroneous "insufficient disk space" error with WaveStudio 7

    This has been bugging me for over 2 years. I get the "Insufficient disk space" error with Vista x32 and x64 and now with Windows 7 x64 when I've edited a wav file and then try to save it. I have plenty of disk space. I've searched till I'm blue in th

  • IPhone - iTunes - Syncing never stops ???

    Sorry, just have posted a question in the , i think, wrong group. So again here: Every time, i connect the iPhone, Sync starts and first does its job well (backup, calendar, adresses, music, and so on)! BUT the Sync then never stops. In iTunes displa

  • Column position of cursor

    One of the nice features of Homesite is that you can in addition to dsiplaying line numbers, you could click anywhere in your code (or text file) and the lower left of the screen will tell you the column position of your cursor. This is handy when pa