Conversion from LabVIEW 2012 to 8.2

Dear All
Can any body help me to convert the attached file from LabVIEW 2012 to LabVIEW 8.2. Please send the file in doc or pdf as well.
Kind Regards
Muhammad Irfan
Solved!
Go to Solution.
Attachments:
PVT - Mathscript Node.vi ‏83 KB

Here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
PVT - Mathscript Node.vi ‏90 KB

Similar Messages

  • Conversion from labview 2012 to 2010

    Hi there. Could someone convert this vi's to 2010 compatible?
    Thanks
    Attachments:
    heart_rate_monitor_example.zip ‏182 KB

    HI, Here you go.
    You can verify that it works correctly.
    Jonathan Cruz
    CHALLENGER
    K U D O S __ B I E N V E N I D O S
    Attachments:
    Heart Rate Monitor Project Folder.zip ‏144 KB

  • File conversion of LabView 2012 to 2011

    Hello ,
     I am new to Lab View. I am stuck with conversion of this file from LabView 2012 to 2011 .Help is very much appreciated
    Thank you ,
    With Regards,
    Jagadish
    Solved!
    Go to Solution.
    Attachments:
    kiran_prob2.vi ‏7 KB

    duplicate post

  • Convert TCPIP_Nagle_algorithm.zip from LabVIEW 2012 to LabVIEW 2011

    Hello,
    can somebody convert the VIs in the zip file from LabVIEW 2012 to LabVIEW 2011 please. I need them to study.
    Thank you very much for your support.
    Solved!
    Go to Solution.
    Attachments:
    TCPIP_Nagle_algorithm.zip ‏63 KB

    Additionally I am sorry that I have put my post in LabVIEW and not under Version Conversion

  • Please Convert tktds5xx from LabView 2012 to LabView 2011.

    I was directed here to have an instrument driver converted from LabView 2012 to LabView 2011.
    Thanks in advance!
    Solved!
    Go to Solution.
    Attachments:
    tktds5xx.zip ‏777 KB

    Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Attachments:
    tktds5xx.zip ‏529 KB

  • Conversion from LabVIEW 2011 to 8.2

    Dear All
    Can any body help me to convert the attached file from LabVIEW 2011 to LabVIEW 8.2.
    Kind Regards
    Muhammad Irfan
    Solved!
    Go to Solution.
    Attachments:
    LabVIEW 6281-40 Replace.vi ‏76 KB

    This is what the Version Conversion board is for.  But here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    LabVIEW 6281-40 Replace.vi ‏99 KB

  • Conversion from LabVIEW 2014 to LabVIEW 2012

    Couls someone convert me this file from LB 2014 to the 2012 version, please?
    Solved!
    Go to Solution.
    Attachments:
    Ejercicio Optativo.vi ‏38 KB

    Saved for 2012.
    Adam
    CLD & CTD
    Attachments:
    Ejercicio Optativo.vi ‏27 KB

  • Open vi reference conversion from Labview 6 to Labview 2014

    Is there a way that someone can help me convert this VI written in Labview 6.1  so that I can work en EXE in Labview 2014.
    I succed to open this vi from 6.1 to 2014 but it does not run. The open vi reference those not work in exe program. Someone know how I can  replace that function...
    Thanks!
    Solved!
    Go to Solution.
    Attachments:
    to convert 2104.zip ‏17 KB

    Error 7 is File Not Found.  So your dynamically called VI is not in your executable.
    In the build spec for the executable in your project, there is a section for "Source Files".  On of the options for the VIs is "Always Include".
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Conversion from Labview 12 to Labview 2011

    This an example file I downloaded from the tutorial but it's only available in LabView 12. I would like to see the example they provided in Labview 2011. Any help would be appreciated. Thank You!
    Sorry, there were multiple files and it was compiled into a zip file.
    Or can someone teach me to convert it?
    Attachments:
    heart_rate_monitor_example.zip ‏182 KB

    Here you go
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Heart Rate Monitor Project.zip ‏146 KB

  • Conversion from labview 9 to labview 8.2

    Hi, can you convert those tow files for me? i have labview 8.2 and the files are in labview 9. thank you
    Solved!
    Go to Solution.
    Attachments:
    Agilent 6612C Voltage Controller.vi ‏42 KB
    Agilent 6612C Voltage ControllerMOD1InPlace.vi ‏13 KB

    Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Agilent 6612C Voltage ControllerMOD1InPlace.vi ‏17 KB
    Agilent 6612C Voltage Controller.vi ‏59 KB

  • Request for Conversion from labview 4 to labview 2013

    Dear Support,
    Could you please update these vi to be readable by Labview 2013?
    Thank you in advance, Mary

    Mass compiled in 8.2.1, which you can open with 2013.
    One of the VIs kept crashing my LabVIEW, so it is not included in this zip file.

  • What files do I send to be upgraded from LabVIEW 5.1.1 to LabVIEW 2012?

    OK.  Just to be clear.  I am a complete newb to ANYTHING LabVIEW or LabWindows related.  I am a programmer, but I have never used any version ever.  That said, I am responsible for the upgrade process of getting our old LabVIEW 5.1.1 system up to date.  The old system (still running and doing it's job everyday), is an old Windows NT v4.0 SP6 system running LabVIEW 5.1.1.  You can just imagine how ancient this is by today's standard.
    Have I set the stage properly?  I hope so.  Newb, Ancient LabVIEW version 5.1.1, Windows NT 4.0, upgrading from 5.1.1 to 2012.
    Now here is what I "think" I know about what is required.  Because LabVIEW 2012 will not directly read in, process and /or compile LabVIEW 5.1.1 files, I must first open and save the files using an intermediate version of LabVIEW (specifically 8.2.1) to bring the files up to a version that 2012 can handle.  I have noticed in reading the Version Conversion forum, that I can attach a zip file of my LabVIEW files and one of the resident Gurus will convert it for me and give them back - quite nice I think.
    Now, I have what I think are all of the required LabVIEW vi and llb files that make up this system we have in place, but I want to be sure before I just post a bunch of stuff.  
    What exactly do I need to zip up and what can I leave out? 
    Are there LabVIEW vi and llb files in a "project" that are not needed? 
    Are there any setup/configuration/project specific files I need to include? 
    Are there any limitatations to this conversion process that I need to be concerned with - such as various toolkits/suites/modules that may have been used but are no longer supported?
    Secondly, I am not really comfortable with posting my vi and llb files for the world to see (and possibly use) as I am not the owner of said modules, just the user/future developer who will be responsible for insuring they stay up to date.  Is there any way I can send my files to a specific NI guru via email instead of just posting them?
    Solved!
    Go to Solution.

    So if I understand you correctly,  all I really need to do is to get LabVIEW 8.2.1, and update my .vi, .lib, and any .ctl files to that version.
    Is it a simple matter of just opening the files and hitting something like SAVE AS, or just SAVE and it will do this?  Once done, LabVIEW 2012 will then allow me to open them and do what I need to do?  Do I have to save them into LabVIEW 2012 first, or is that automatic when I try to recompile them?
    When I get a copy of LabVIEW 8.2.1 (eval version), do I have to get all of the pieces (modules, toolkits, etc.) in order to update the 5.1.1 files?  Based on what is installed on that NT v4.0 system, we have the following items installed:
    NI VISA
    NI ComponentWorks 3D Graph
    NI DataSocket
    NI LabVIEW 5.1.1 Advanced Analysis Library
    NI LabVIEW RTE 5.1.1
    NI LabVIEW v5.1.1
    NI Measurement and Auto Explorer 1.1
    NI-488 2.1.60
    NI-DAQ 6.6
    NI-PAL 1.3.110
    NI-Reports
    NI-VXI/VISA
    You mention DAQ.  Our program uses NI DAQ v6.6 now.  I have LabVIEW Developer 2012, so I just download the DAQ files for it and it will replace the NI DAQ v6.6 library files we use now? 
    Thanks for your help so far.  If we had a support contract in place, this wouldn't be an issue.  However, as I stated, I am not the owner of the files, just the currently assigned caretaker, and part of my task is to get from where we are now on this ancient hardware/software platform, to the latest and greatest.  However, I am specifically not allowed to just place the files on a public forum for all to see.  It just isn't done.  We can send them to a known location and a known entity, but not to just anyone/anywhere as a public forum is by its very nature.   
    I know there is nothing you guys can do if I cannot give you the files, but thanks for helping me to do it myself.    Getting an eval copy of 8.2.1, et. al is probably what I have to do here.

  • Conversion of VIs from LabView 2013 to 2011

    Hi,
    I would be grateful for conversion of zipped VIs from LabView 2013 to 2011.
    Thank You,
    Michal
    Solved!
    Go to Solution.
    Attachments:
    main VIs.zip ‏38 KB

    Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Attachments:
    main VIs 2011.zip ‏27 KB

  • UpConversion from Labview 5.1 to 2012

    I would like to have this VI's converted to the closest possible version, to be used in Labview 2012.
    I've read that the version 8.2.1 is ideal to make this step conversion, could someone convert it to me, please?
    Thanks a lot for your help!
    Rodolfo
    Solved!
    Go to Solution.
    Attachments:
    ConvertTo8.zip ‏5485 KB

    Mass compiled in 8.2.1
    I also included the mass compile report inside of the zip file, just in case you wanted to take a look.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Converted to 8.zip ‏5094 KB

  • Upconvertion from labview 5.1 to 2012 - (B)

    Could anyone please upconvert this softwares from Labview 5.1 to a version which can be opened on Labview 2012?
    I would be really grateful.
    I've post another codes on other messages, as I can't attach all of them at once due to the forum limitation of 6 Mb for the attachments. Not that this is the part (B), with different content from part (A).
    Once again sorry for that, that's the only way I've found so far.
    Thanks in advance!
    Attachments:
    ProgramsB.zip ‏3307 KB

    Mass compiled in 8.2.1, which you can open with 2012.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    ProgramsB.zip ‏2756 KB

Maybe you are looking for