Conversion from LV 5.1 into LV8.5

Hi, can someone please help me upconvert these LV5.1 files to LV8.2. Your help would be greatly appreciated.
Thanks in advance
Attachments:
6KEthernet.vi ‏54 KB
6KRS232.vi ‏55 KB
6KTimeDelay.vi ‏25 KB

Attached as 8.2, which you can open.
Attachments:
6KEthernet.vi ‏17 KB
6KRS232.vi ‏16 KB
6KTimeDelay.vi ‏11 KB

Similar Messages

How do I stop the iMessage conversation from automatically showing when I go into the I message center? I only want the contacts to show down the left side and nothing on the right until I select a conversation to view.

HOW DO I STOP THE WHOLE IMESSAGE CONVERSATION FROM AUTOMATICALLY SHOWING WHEN I GO INTO IMESSAGE? I only want the contact bar on the left to show and not the whole conversation, until I pick one to see.

You can't. You can sign out of messages and turn it off, but you can't do what you would like to do. You can send feedback to Apple.
https://www.apple.com/feedback/ipad.html

HT3529 If logged into IMessage from my 2nd iPhone device will I be able to see conversation from my 1st on iMessage?

If I'm logged on iMessage on one phone and the other phone as well, can I see iMessage conversations from both?

If you are logged in with the same Apple ID with iMessage on both and you have the same phone number(s) and/or email address or addresses selected under you can be reached by iMessage at for your iMessage preferences on both, iMessage conversations will be kept synced between the two.

Getting ÿþ as saved conversations from Lync in Outlook in Office 2013

Hi,
I've been trying to get to the bottom of this and have found similar posts, but no one seems to have an answer.
When I IM someone using Lync 2013, they get a pop up notification but instead of the message they see ÿþ<. Once they open the chat window, they can see my typed text. Occasionally, certain people can't see the first line of my chat, but as
long as they keep the chat window open, they can see everything new I type.
All my conversations that are saved in outlook show ÿþ< for the text and are unreadable. I've disabled the saving of conversations because they have become worthless.
I believe it has to do with BOM but have not been able to find a way to fix this.
If I copy a conversation from the chat window and paste it into Microsoft Word it shows ÿþ<, but if I paste it into notepad the conversation appears.
(I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
I've tried changing the preferred encoding for outgoing messages: to Unicode (UTF-8) in Outlook, but this had no effect and I can't find a similar option in Lync 2013.
(I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
I enabled logging for Lync and the event IDs that come up are 1, 11 and 12, to which I cannot find any information for at the moment.
Any help and or suggestions would be appreciated.

Hi,
Did the issue happen only for you or for multiple users?
Please try to delete Lync User Profile and information on Registry, then repair Office 2013.
The path of Lync User Profile: %UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
The path for information on Registry: HKCU\Software\Microsoft\Office\15.0\Lync\[email protected]
Then test the issue again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

How can I convert (or switch) the RGB percent values from the LR histogram into RGB values which are shown e. g. in PS/CameraRAW?

In LR 5.5 (same in previous versions) the RGB values in the histogram are shown in percent (relativ) values. I prefere to see the absolute values, but I can`t find any way to switch. Maybe this option is intentional disabled, because LR works in 16-Bit mode this would result in values up to 2^16. But as i compared the relativ values from LR with the absolute values from PS i run into a conversion problem. The following example shows the differences:
CameraRAW : RGB, 128,0,0
Lightroom: RGB, 43,8%, 19,0%, 6,2%
CameraRAW: RGB, 0,128,0
Lightroom: RGB, 29,8%, 47,5%, 17,5%
Mainly i have two questions:
1. Is there any possibility to change the percent RGB values in LR to absolut values?
2. How can i convert CameraRAW values to LR values (see above)?

TThe reason that a design decision was made from the beginning of LR to show only the percentage values was that RGB values are dependent on the color space and the LR histogram and numerical readout are derived from the Develop module's display space which is a hybrid color space with ProPhoto RGB primaries and the sRGB TRC. Thus the numerical values in the display would be different from the exported RGB image (in an orthodox space) and it was feared that this would be misleading. When soft proofing was introduced, because it involved converting the display to an orthodox space, it became possible to use the 0-255 scale in that mode.

SSIS 2012 is intermittently failing with below "Invalid date format" while importing data from a source table into a Destination table with same exact schema.

We migrated Packages from SSIS 2008 to 2012. The Package is working fine in all the environments except in one of our environment.
SSIS 2012 is intermittently failing with below error while importing data from a source table into a Destination table with same exact schema.
Error: 2014-01-28 15:52:05.19
   Code: 0x80004005
   Source: xxxxxxxx SSIS.Pipeline
   Description: Unspecified error
End Error
Error: 2014-01-28 15:52:05.19
   Code: 0xC0202009
   Source: Process xxxxxx Load TableName [48]
   Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Invalid date format".
End Error
Error: 2014-01-28 15:52:05.19
   Code: 0xC020901C
   Source: Process xxxxxxxx Load TableName [48]
   Description: There was an error with Load TableName.Inputs[OLE DB Destination Input].Columns[Updated] on Load TableName.Inputs[OLE DB Destination Input]. The column status returned was: "Conversion failed because the data value overflowed
the specified type.".
End Error
But when we reorder the column in "Updated" in Destination table, the package is importing data successfully.
This looks like bug to me, Any suggestion?

Hi Mohideen,
Based on my research, the issue might be related to one of the following factors:
Memory pressure. Check there is a memory challenge when the issue occurs. In addition, if the package runs in 32-bit runtime on the specific server, use the 64-bit runtime instead.
A known issue with SQL Native Client. As a workaround, use .NET data provider instead of SNAC.
Hope this helps.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Middleware-Error of Field conversion from R/3 to CRM

Hello Friends,
I am getting the below error when we tried replicating pricing condition objects from R/3 to CRM. Kindly help me if you have any solution on this.
Funct. CND_MAP_CONV_FUNC_T682Z_QUSTR cannot convert content KOMP of field T682Z-QUSTR to field /SAPCND/T682Z-QUSTR
Message no. CND_MAP141
Diagnosis
Conversion of the source field into the target field cannot be implemented. Possible causes may be:
No conversion is defined for the current contents of the source field in the system tables for condition exchange.
There is no conversion rule for converting the current field content in the system tables for condition exchange.
Conversion according to the defined conversion rule was not correct for the current contents of the source field.
The reason for this os often problems that result from putting together an R/3 System with a CRM System. These problems are, for example:
not paying attention to the restrictions in CRM for data values or supporting applications and objects,
incorrect exchange objects or exchange objects with the wrong selection values,
an inconsistent data structure from the R/3 OLTP System.
Thanks & Regards,
Yogesh

Hello Yogesh
I have just noticed the message you placed on SDN re condition customising download errors. Did you ever get to the bottom of this problem ?
The reason I ask is that I am getting similar errors. I actually started with two errors which I believe are related, these being:
Funct. CND_MAP_CONV_FUNC_T682Z_FNAME cannot convert content AUBEL of field T682Z-QUFNA to field /SAPCND/T682Z-QUFNA
and
Funct. CND_MAP_CONV_FUNC_T682Z_QUSTR cannot convert content KOMP of field T682Z-QUSTR to field /SAPCND/T682Z-QUSTR
I have since read OSS Note 319636 and looked at maintaining the separate
conversion rules in CRM Customizing table CND_MAPM_CNV_FLM by adding an
entry for AUBEL into view V_CND_MAP_CNVFLD using SM30. This I saved to
a transport.
I then looked to add AUBEL to the field catalog within the IMG however I received a
message stating that :
"Entry is in SAP name space. Message no. /SAPCND/CUSTOMIZING403".
So it won't let me.
Did you have similar problems and did you resolve them ?
Regards
Ian
[email protected]

FM for Material number conversion from R/3 to APO in R/3

Hi,
   Can anybody tell me conversion exit (function module) for Material number conversion from R/3 to APO in R/3 system. I mean i have 18 digit R/3 material number which i have to convert to 40 digit APO material number in R/3 system.
Please suggest to win full points.
Thaniks in Advance,
Chandan Dubey

Dear Chandan,
Conversion Exits:
CONVERSION_EXIT_MATN1_INPUT ....... If you are storing Material With Zeros
Then concatenate it with 22 zeros. i.e. '0000000000000000000000000000'.
For example:
data : v_matnr type matnr,            "R/3 Material
       v_apo_matnr(40) type c,        "APO Material with 40 length
       v_zeros(22) type c. value '0000000000000000000000000000'.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
       EXPORTING INPUT          = v_matnr
       IMPORTING OUTPUT         = v_matnr.
concatenate e_mantr v_zeros into
            v_apo_matnr.
Regards,
Naveen.

Date/time conversion from UTC to CET

Hello,
Jjust a little question to our SAP BI community!
Is there a BI function/ggod way that converts a (datetime) string DDMMYYYYHH:MM:SS in UTC time zone into a string DDMMYYYYHH:MM:SS in CET timezone ?
We receive this string in input in a flat file and need it to convert from UTC to CET.
Or do you know any way to convert a date/time from IUTC to CET, eveen using an ABAP function?
Thanks a lot,
Matthieu

Hi,
Check this thread for time conversion from UTC to Local time
[ABAP statement for converting UTC date/ time to local date/time],
Regards,
Daya Sagar

Date conversion from YYYYMMDD to DD.MM.YYYY

Hi,
I'm trying to load some data from a flat file into BW. I have a date column in the CSV file that has the date in YYYYMMDD format. when I load it into Bw, I want to change the format to DD.MM.YYYY .
I have written a small routine that should do this, but it doesn't seem to work.
data:v_date like sy-datum,
v_date1(10) type c.
Concatenate v_date+6(2) '.' v_date+4(2) '.' v_date+0(4) into v_date1.
RESULT = V_DATE1.
The result of this routine is YY.YYMM.DD instead of DD.MM.YYYY.
Can anyone tell me where I'm going wrong?
Thanks
Sam

Hi Keshu,
When I add the loop to my code, it doesn't seem to work. It gives me the following error:
does not match the user-dependent date format --> long text
Diagnosis
does not correspond to the date format that is assigned to the current user ASDSAD.
System Response
The date cannot be converted; the process was terminated.
Procedure
Enter the conversion exit RSDAT for automatic date format detection.
Any suggestions?

Conversion from BO 5.1.9 Deski to BO XI 3.1 SP3 Webi

Hi Everyone,
As part of of our project, we are executing a BO upgrade project and have undertaken BO report migration and conversion from deskI in BO 5.1.9 to WebI in BO XI 3.1. The conversion of reports was assumed to be carried out through the report conversion tool (RCT) of BO XI 3.1 SP3. However, RCT has failed in converting all deskI reports to WebI.
Hence, we are seeking your help & assistance in finding out, the optimal way of resolving the problem. Can you please indicate:
1. Is there any hotfix/patch that SAP can provide for making RCT more robust resulting in elimination of conversion errors/influence the success rate of report conversion?
2. If no hotfix for RCT is present, can we get quick answers from SAP through the alliance for resolution of these report conversion errors? We have received the below errors when we made an attempt at report conversion
1.Breaks in Web Intelligence can only be set on objects present in the block
2 Objects cannot be hidden in Web Intelligence documents
3.Page setup options are not implemented in Web Intelligence (First page number, page order, scale, Fit to N pages)
4.Across options for crosstabs are not available in Web Intelligence -5.Detail variables have no associated dimension in Web Intelligence 6.Conditional or permanent Hide Header not available in Web Intelligence 7.Function not available in Web Intelligence
8.The formula of a global filter in Desktop Intelligence cannot be migrated into a Web Intelligence report filter
9.A formula from a Desktop Intelligence block filter cannot be migrated into a Web Intelligence block filter
10.Unsupported 'Do not retrieve data' option
11.Conditional or permanant Hide Footer does not exist in Web Intelligence
12.Keyword not available in Web Intelligence
13.Unsupported Data Provider
Anticipating your help and cooperation at the earliest. Please let me know if you need any more information.
Many Thanks & Regards,
Sandeep

Report Conversion Tool cannot guarantee 100% conversion rates. It's imposible due to functionality differences that still exist between Full Client/Deski and Webi documents.
If you have a report that won't convert - you will have to manualy re-create it in Webi. It'll show you if design you use is even possible there or not.
As to the list of errors you provided - each one has to be reviewed and investigated to see why it happens.
Like #3 - might be due to the fact that Webi has no page options or #13 might indicate unsupported data provider, lust like the error says.
You might want to open a support Incident to properly investigate all the errors you received, but keep in mind - 100% conversion is not possible unless you use simplest reports.

Struts/ADF/Toplink conversion from 10.1.2 to 10.1.3

Hi. We have a J2EE application based on Struts/ADF/Toplink.
We just let the JDeveloper migrate the whole application itself.
We solved a few minor problems, but now we have the greater one:
- we have in domain classes some getX...(), setX...() methods, intended for example
for getting attributes of nested objects or for conversion from String to Date.
In older version, when you had some getXSomeAtr() method in domain class, the attribute
XSomeAttr was automatically generated into Data Control.
In newer version it's not! If you want the attribute to be in data control, you must
have an private attribute XSomeAtr declared in domain class.
Example - we have these attibutes (first two has their own getters and setters and are
mapped in toplink, the third is unmapped)
private Date datum;
private String nazev;
private String XDatumAsDate;
and methods
public String getXDatumAsDate() {
return OurUtils.dateToStringAsDate(getDatum());
public void setXDatumAsDate(String datum) throws ParseException{
Date d = OurUtils.StringToDateAsDate(datum);
setDatum(d);
And the form look like this
<html:text property="XDatumAsDate" .../>
<html:text property="nazev" .../>
Reading is ok, but attempt to modify date in input field ends with
"JBO-35009: Setting attribute for XDatumAsDate in object methodRSICollection failed"
Are we doing something wrong ? We just need to have the date entering under our control and
be able to enter dates in various formats.
Thanks in advance for any comments.

I compared the both old and new data control xml files and found the difference. The previous attribute descriptor has IsUpdateable="true" but the new has IsUpdateable="0".
Manually changing won't help - data control generation of any class regenerates all data controls and puts back IsUpdateable="0". I'm stuck now.

Best practice video conversion from download

I am looking for best practice for video conversions.
I am downloading adobe recordings via this method:
http://server.adobeconnect.com/xyz/output/filename.zip?download=zip
From here, I have been converting the FLVs using either freemake video converter or FLV converter. I have tried converting into AVI (XVID), MOV, WMV, etc. (I need the file to be under 600 MB for an hour of recording, therefore it is going to need some type of compression).
My goal is to import the video into Sony Vegas Pro 10 for further editting. I have found that whatever method I use, the video and audio does not sync properly about 50% of the time. The video time is longer than the audio time usually. Or that there are other various errors, such as the video just freezing halfway through the video.
I have been using connect for a few years now, but with each update I find (connect 8, 9, etc), that the problems are getting worse. At this point I am just wasting time trying to convert into various formats using various codecs just trying to luck upon one where the video is at least without error.
What methods are others using to convert the FLV to a workable editable format?

Can't the FLV files be changed into many different formats through Apple's
Compressor or Adobe Media Encoder? These formats can then be opened in
standard video editing software for editing.
Best practice video conversion from download
mach5kel
to:
jsb152
05/21/12 01:03 PM
Please respond to jive-509399086-9dnu-2-2mvb7
Re: Best practice video conversion from download
created by mach5kel in Connect General Discussion - View the full
discussion
Yes, I use this as a last resort, as the quality of capture this was is
signifcatnly lower. As well as it is a much more time consuming process. I
sometimes have over 50 parts of 1 hour video. To use camtasia, you need
first to record it, then it must be saved in a camtasia format, and then
lastly rendered into avi or wmv. Therefore, it is does take awhile.
Really, I feel there shouldnt be so many errors in the conversion process,
but I am finding the FLV recordings themselves have problems. This last
file I am looking at, even the recording playback on adobe connect, has
serious issues with audio and video sync. A problem that is all too common
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/4426243#4426243]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/4426243#4426243]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Connect General Discussion by email or at Adobe
Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

Conversion from CS4 to CS5

Greetings:
I'm thinking of pulling the trigger on a CS5 upgrade. I use PrPro CS4 and Encore CS4. In general, I edit AVCHD video in a PrPro project with multiple sequences. I dynamically link these into my Encore projects with multiple timelines, build my menus, wire it up and build DVD's and BluRays. I should mention that my menu buttons and thumbnails are also designed by me and imported from Photo Shop. I do this because I am a nerd and if there's a choice to be made between picking from a library of pre-cooked items and designing the items myself from scratch, I will always opt for the latter.
I am about 1/2 way through a project right now and do not expect to be done for another 6 weeks or so but I'm enticed by the claims of performance improvements and the prospect of writing AVCHD directly to BluRay without transcoding.
My question then: Will my PrPro and Encore projects from CS4 port smoothly into CS5 of same? Anything I should watch out for?
My system was updated in January:
HP Pavillion with Windows 7 Home x64
1 TByte HD
8 GB Memory
ATI Radeon 3650 with 1GB memory
Should I?
All opinions welcome.
Thanks,
Mark Roberts,
Toronto, Canada

For Premiere CS5 at least, the best way to answer the question is to download the trial version and try it. I have both CS4 and CS5 trial on my computer, and CS4 still works fine. When you import a CS4 project into CS5, it creates a new project file, so the CS4 project remains untouched.
There are a few CS4 effects not found in CS5 which will not survive the conversion - the GPU effects and time warp effect come to mind, though there may be others.
J. D.

Conversion from .ai to .svg issue

Hello all,
I'm having problems regarding the conversion from .ai file to .svg file.
The problem, as you can see the attachment files , is an alteration of the image.
I wanted to ask you, certainly more experienced than me , if is there a way to solve this problem.
(I have activated the adobe optimization in the save as dialog.).
Ps:
If I open files created with Adobe does not appear to be no problem, but if the file is opened by an application like Inkscape or our application the image is altered.
Thank you in advance for any suggestion /tips .
Ivan

OK try Flatten Transparency and then Expand to make the Gradients into Blends

Conversion from LV 5.1 into LV8.5

Similar Messages

Maybe you are looking for