Conversion from MDMP to Unicode

Hallo.
I would like an information.
We are upgrading from R/3 4.6C MDMP to ECC 6.0 Unicode through the CU&UC Guide.
Our codepages installed (Table TCPDB) are 1100 and 1700 (for Greek).
We are setting SPUM4 and I see that in the CU&UC Conversione guide there is:
"2.2.2 Initialize/Edit Language Lists
Before the database check, you have to maintain two lists which contain languages and code pages. They are used in conjunction with language keys to determine the correct code page to use for converting table data.
2.2.2.1 Restrictions
You cannot edit the lists during a running worker job!
Active languages can be added to or deleted from both lists before the Consistency Check is started. This also includes changing the code page information for a language as described in the following sections.
Inactive languages can be added to or deleted from both lists before the scan Tables with Ambiguous Language Information is started.
Systems with Code Page 1100
If you use the wrong frontend code page 1100 for logon (with SAP GUI for Windows) to SAP systems running with code page 1100, you are able to input some characters that are not in the system code page 1100. Example: the Euro sign () and the trademark sign (). Those characters get lost during the conversion!
system code page = 1100     frontend code page = 1100
no and in the Unicode system
There is a workaround to prevent this:
For all languages which are displayed in the Language List with code page 1100 change this entry to 1160 which corresponds to Microsoft code page cp1252.
system code page = 1100     frontend code page = 1160
and in the Unicode system
So I understand that in the Language list settings of SPUM4 I have to put:
Language
Code Page
Active
1160
DE
1160
X
EN
1160
X
FR
1160
X
EL
1160
X
HU
1160
IT
1160
X
JA
1160
DA
1160
PL
1160
ZF
1160
NL
1160
NO
1160
PT
1160
SK
1160
RU
1160
ES
1160
X
Note the parameter:
zcsa/installed_languages=EFDGIS
Are my language settings right?
In particular, is the entry for EL (Greek) right or have I to put, instead 1700 for EL?
So
Language
Code Page
Active
EL
1700
X
Could you help me?
Thanks.
Mario

Hallo.
Are there any news about my issue?
Thanks.

Similar Messages

Experiences from customer who have converted from MDMP to Unicode

I would be interested in seeing a weblog or article from a customer who has gone through the conversion from MDMP to Unicode on an R/3 system. I would be interested in how the process went, what kind of problems were encountered, how long it took, how many of your custom ABAP programs needed changes, etc.

Thomas,
I am also interested in contacting any companies that have migrated to Unicode (with or without MDMP). ChevronTexaco is planning a very large global project that will likely involve migrating to Unicode in the next few years. Anyone who is willing to chat,please feel free to contact me at [email protected], 925-842-0864.
I suspect there are a lot of us who are going to be heading down this road in the next few years and we all want to learn from those who have blazed the trail before us.

Pdf conversion from a non unicode system to a unicode system

Hi,
I have a BSP application that runs on a unicode system which retrieves data to be output in pdf from a non unicode sap system.
We get the data from the non unicode system through a RFC call and store data in table otfdata type itcoo, then we perform the conversion through the following:
perform pdfcnv_convertotf in program saplstxw
tables otfdata
pdf
using
'T'
archive_index
1
'T'
pdf_bytecount
app_tot_xstring
and then perform the hex conversion, but the printout is full of # chars. The good characters are followed by the # char. It looks like the unicode conversion is not good.
Thank you in advance for your help.
Best regards,
Donatella

Welcome to SDN
check out this weblog where Thomas Jung explains unicode conversion for excel, the same thing could be applied in your case as well
/people/thomas.jung3/blog/2004/08/09/bsp-download-to-excel-in-unicode-format
Regards
Raja

Integrating MDMP and Unicode systems with IDoc interfaces

Hi,
We are working on integrating SAP R/3 6.20 (MDMP) with SAP PI 7.0 SP10 (Unicode) system. The source will send MATMAS or CLFMAS IDocs with Thai / Japanese characters and PI should transform and post it to SAP ECC 5.0 Target system [IDoc to IDoc scenario].
( SAP R/3 Legacy 620 - Non-Unicode / MDMP ) |----> ( XI - Unicode) -> (ECC - Unicode)
Had a look at few SAP notes (745030 ,656350 and 613389) and it looks like there is no standard way/best practice to handle this scenario.
References:
1.PDF of TECHED Session ID: IM101 Dealing with Multi-Language Garbage?Data Lessons Learned
2.SAP Note 745030 - MDMP - Unicode Interface_Solution Overview.pdf
3.MDMP_Unicode_Transfer_final.doc from SAP Note 745030
4.SAP Note 656350 - Master Data Transfer UNICODE to MDMP Systems with ALE.pdf
5.SAP Note 613389 - ALE SAP system group with Unicode systems (Solution-2)
My understanding per SAP Notes: (Please correct me if I'm wrong)
a. For MDMP integraton we can't use Standard ALE Config instead we have to use Custom Configuration (IDoc collection setting in Partner profile &Scheduling RSEOUT002/RSEOUT00_MDMP and use Function module :IDOC_INBOUND_ASYNCHRONOUS_2 ).
b. The RFC Destinations should use proper logon langauage for correct MDMP IDoc transfer (For sending IDocs with Japanese character, the logon language should be JP).
c. If we want to transfer IDocs in more than one language we need to create multiple Partner profiles/RFC destinations each with specific logon language.
Please guide us in integrating these systems if you have done a similar integrations, following are my questions:
1] Is there any configuration change required at PI layer?
2] Do we need to install codepages in PI Unicode system for all languages used or Unicode system is capable of handling all the languages?
3] Is it necessary to install any SAP Add-on package in R/3 MDMP system inorder to support MDMP to Unicode data transfer?
3] If we want to send MATMAS/CLFMAS IDoc with Thai/Japanese characters from same system, what are the changes required at the Source system?
(Source may send MATMAS/CLFMAS IDoc with either Thai/Japanese characters but not both of them in a single IDoc)
4] Can we use regualr ALE & Partner profile settings for handling multi-byte characters or we need to use IDoc collection and RSEOUT002/RSEOUT00_MDMP report for transfer?
5] Is there any restrictions on the IDoc types (MATMAS,CLFMAS etc) supported in MDMP-Unicode integration solution.
5] Is there any best practice document available for this scenario?
6] Do we need to involve SAP AG for MDMP to Unicode system integrations(As per SAP Note: 656350) ?
Thanks and Regards,
Ananth

Hi Ananth,
as you have already mentioned, you need differents RFC destinations for each language. So you have to make sure, that the IDocs use the right destination according to there content.
If you have messages from PI to MDMP it is the same, you need different channels with different logon languages as well. You need an identifier in the message, that can be used for selecting the correct channel.
It should not be a restricting to any IDoc type, but it is not possible to post a message with different languages (which require different codepages) in one IDoc.
For correct conversion from a non unicode system to unicode, the codepages have to be installed in th OS of the PI server.
Regards
Stefan

Getting ÿþ as saved conversations from Lync in Outlook in Office 2013

Hi,
I've been trying to get to the bottom of this and have found similar posts, but no one seems to have an answer.
When I IM someone using Lync 2013, they get a pop up notification but instead of the message they see ÿþ<. Once they open the chat window, they can see my typed text. Occasionally, certain people can't see the first line of my chat, but as
long as they keep the chat window open, they can see everything new I type.
All my conversations that are saved in outlook show ÿþ< for the text and are unreadable. I've disabled the saving of conversations because they have become worthless.
I believe it has to do with BOM but have not been able to find a way to fix this.
If I copy a conversation from the chat window and paste it into Microsoft Word it shows ÿþ<, but if I paste it into notepad the conversation appears.
(I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
I've tried changing the preferred encoding for outgoing messages: to Unicode (UTF-8) in Outlook, but this had no effect and I can't find a similar option in Lync 2013.
(I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
I enabled logging for Lync and the event IDs that come up are 1, 11 and 12, to which I cannot find any information for at the moment.
Any help and or suggestions would be appreciated.

Hi,
Did the issue happen only for you or for multiple users?
Please try to delete Lync User Profile and information on Registry, then repair Office 2013.
The path of Lync User Profile: %UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
The path for information on Registry: HKCU\Software\Microsoft\Office\15.0\Lync\[email protected]
Then test the issue again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

SAP MDMP Vs Unicode

Hi,
One of our application is using SAP ECC 5 MDMP. We want to understand the difference between MDMP and Unicode to evaluate if this is version change or business function upgrade.
Any inputs on this will be highly appericated.
Regards
Tushar

Neither of them.
MDMP means, basically spoken, that the application server switches the language and the data, that is transferred between a user who´s logged on with a specific language, to exactly that language/codpage,. the user is logged on.
That means, that a polish user will be able to enter polish and see (and other Latin-2) data, but data of other codepages appears "corrupt".
The MDMP approach is proprietary, it can be pretty complicated to connect an MDMP system correctly to other systems.
Unicode is a standard (http://en.wikipedia.org/wiki/Unicode). In UC each character has it own value, no matter what language you are "logged on".
To convert your system, you need to do some preparation work, export your system with R3load, delete the database and create the system from scratch using that export.
For more information see http://service.sap.com/unicode
Markus

Project Conversion from 11.03 to R12- need help

Hi All,
I need some information regarding conversion from 11.03 to R12 along with Capital Project's conversion, do we need to take care Asset Assignment and Assets information at the time of Project Conversion. Iam doing Project and Task conversion different. Is there any good mapping document or Conversion FD, if any body have please send my mail ID. [email protected]
Thanks for your help.
Thanks,
Srini..

Usually only Open Invoices and Unapplied Receipts are migrated from Old system to New Instance.
Post Migration Reconciliation shall be tough in that scenario. Reconsider/Rediscuss with Client.
Migration can be done using APIs or Custom Scripts using Standard Interfaces.
Hope this is helpful
Regards,
Sridhar

Since downloading Firefox 4, I am having problems archiving gmail conversations from my inbox view. Also, when I go to enter a new event in google calendar, I now have to click the cursor in the box to type the event (it used to let me just start typing).

Since downloading Firefox 4, I am having problems archiving gmail conversations from my inbox view (either one or several conversations) as it says "No Conversations Selected" when I have selected one or several. Also, when I go to enter a new event in google calendar, I have to click the cursor in the box to type the event (it used to let me just start typing) or else it flips out and starts jumping to day view or another month. Does anyone know how to fix either of these?

I have had this problem; but while trying to fix another problem, I reset my preferences for Firefox and it fixed this problem as well. To reset preferences, follow this link: http://support.mozilla.com/en-US/kb/Resetting%20preferences

How can I print a text message conversation from my iPhone? Not using screenshots.

How can I print a text message conversation from my iPhone? Not using screenshots. It's around 500 messages so screenshots is not a option.

Yes, you can delete from iphone:
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf
It is covered in the manual.
Page 172:
"Delete a podcast: In the Podcasts list in iPod, swipe left or right over the podcast, then
tap Delete. "

Page numbers incorrect after conversion from Excel to pdf

Page numbers incorrect after conversion from Excel to pdf
""This above link (thread:834599) is from a case back in 2011 that claims to solve this problem, but it does not solve this problem. I think that customer only cared about having continuous page numbering, not discrete page numbering per sheet.
========================
I still have this issue in Acrobat XI and MS Office Professional Plus 2010. I keep upgrading to no avail. This regression has resulted in a huge time drain for me. If you fixed it, please explain how I can get my hands on the resolution.
Previous versions of Excel and Adobe Acrobat enabled flexibility around the "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) token, depending on context and usage. The "# of pages" token could represent EITHER the number of pages in the workbook OR the number of pages in the tab/sheet, depending on how you generated the PDF:
You could select "Selected Sheets" and then select all or some of the individual sheets in the workbook, and the PDF would honor the discrete numbering of each of the sheets, so the first page of each sheet was p1 and the "# of pages" was the number of pages in the sheet; not the number of pages in the workbook; or
You could select "Entire Workbook" and the PDF would honor continuous page numbers across all sheets, as a single document.
Now, it only honors the total number of pages in the workbook, regardless of the method you use to publish to PDF: saving as PDF, printing to PDF, using "createPDF" from Acrobat plugin to Excel's menu ribbon; selecting all sheets, some sheets, or Entire Workbook; automatic First page number or "1" under Page Setup > Page> First page number. (This last option, btw, does restart every sheet at p1, but it hardly makes sense if the total number of pages is still the total number in the workbook instead of the number in the sheet.)
I spent a lot of time trying each which way that the blog posts recommended and have tried this on multiple versions of Excel and Acrobat now.
NONE of these time-consuming experiments gave me what I wanted.They all insist that "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) is the total number of pages in the workbook or the total number of pages in the selected sheets combined.
The numbering are correct in Excel Page Layout.
The same issue happens when using LibreOffice calc. (Although, I never tested with Libre Office before, so I don't know that it ever worked).
The workaround now is to create PDF for each spreadsheet one at a time, and then compile them using the Acrobat combine/binder feature. All alternatives are extremely time consuming and tedious. It used to be automatic. This is a major regression that has gone untreated for over a year now, maybe two years.
My task takes infinitely more time to complete than it did with previous versions of Acrobat. That means that days are added to my project, when the functionality used to enable a quick pdf generation that was ready for review, now I have to do this very manual time-consuming set of steps to generate a draft. As the project has grown and more tabs are added, my pdf-generation task takes that much longer. We require lots of drafts. It used to be easy and fast. Now it is hard and time-consuming.
In my opinion, the problem is not Excel; it is Acrobat because it was introduced with an upgrade in Acrobat, not an upgrade in Excel. The problem was introduced in Acrobat 9 or 10. Please provide a patch or add-on or something.

If you are setting up the page numbers in Excel, the resulting PDF would display the the page numbers created in Excel. On Excel 2010 support page, (http://office.microsoft.com/en-us/excel-help/insert-and-remove-page-numbers-on-worksheets- HA010342619.aspx#BM2) is stated the following "tip" which indicates by default Excel 2010 starts numbering each tab with 1. Exel's workaround tip is below -
Set a different number for the starting page
Tip To number all of the worksheet pages in a workbook sequentially, first add page numbers to all worksheets in a workbook, and then use the following procedure to begin the page number for each worksheet with the appropriate number. For example, if your workbook contains two worksheets that with both be printed as two pages, you would use this procedure to begin the page numbering for the second worksheet with the number 3.
On the Page Layout tab, in the Page Setup group, click the Dialog Box Launcher next to Page Setup.
On the Page tab, in the First page number box, type the number that you want to use for the first page.
Tip To use the default numbering system, type Auto in the First page number box.
Also helpful in the same section is the note on viewing page numbers. To see if the page numbering dilemma originates in Excel make sure you are using the Page Layout View see below:
Hide All
If you want numbers shown on pages when you print a worksheet you can insert page numbers in the headers or footers of the worksheet pages. Page numbers that you insert are not displayed on the worksheet in Normal view — they are shown only in Page Layout view and on the printed pages.
Overall it may be easier not to create the page numbers in Excel but instead create then in Acrobat using the Headers and Footers option in Acrobat. I hope this helps - it sounds like a frustrating issue you are experiencing.

I can´t sync iCal events written in the iphone4 to the macbook ical, but conversely from macbook to iphone there´s no problem, can somebody help me?

I can´t sync iCal events written in the iphone4 to the macbook ical, but conversely from macbook to iphone there´s no problem, can somebody help me?

Thanks for your answer! I tried as you say, erase the Sync History, but now does not sync any calendar, only displays the birthday ...do not know whatelse to try.

Conversion from string "20041023 " to type 'Date' is not valid.

Hi ,
I have a table with one of the column(EmpHiredate) datatype is char(10). It has value like "20141023". I need to display this value as date format(dd/mm/yyyy) in report.
Following methods i tried in textbox expression but no luck.
=Format(Fields!EmpHireDate.Value,"dd/MM/yyyy")
=Cdate(Fields!EmpHireDate.Value)
Error:
[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "20041023 " to type 'Date' is not valid.
Is it possible to convert string to date using SSRS textbox expression ? Can anyone help me with the solution.
Thanks,
Kittu

Hi Jmcmullen,
Found one more issue on the same. I have one value like "00000000" for the column(EmpHiredate)
, when i use above expression values(ex:"20141023")
are displaying in dd/MM/yyyy format in report except value like "00000000" and giving following error:
[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "0000/00/00" to type 'Date' is not valid.
Even i tried to pass its original value("00000000") as below but no luck.
=IIF(Fields!EmpHireDate.Value = "00000000","00000000",Format(CDATE(MID(Fields!EmpHireDate.Value,1,4) + "/" + MID(Fields!EmpHireDate.Value,5,2) + "/" + MID(Fields!EmpHireDate.Value,7,2)),"dd/MM/yyyy"))
Also tried this:
=IIF(Fields!EmpHireDate.Value = "00000000","2000/10/21",Format(CDATE(MID(Fields!EmpHireDate.Value,1,4) + "/" + MID(Fields!EmpHireDate.Value,5,2) + "/" + MID(Fields!EmpHireDate.Value,7,2)),"dd/MM/yyyy"))
Please Suggest.
Thanks ,
Kittu

Error while loading : Time conversion from 0CALDAY to 0FISCPER

Hi ,
I get the following error when loading to an ODs .
My 0FISCPER is mapped to one of the date fields from the extractor (Document date) and also Have 0FISCVARNT as part of data fields .
" Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20060405 " .
thanks .

Hello CG
Please refere this forum
Time conversion problem
Thanks
Chandran

ITunes will no longer play nor add to the library any mp3 files which I have created by conversion from a wav file.

I am running iTunes 10 on XP Pro and it will no longer play those mp3 files which I have created by conversion from wav files. I tried to delete some from the library and then re-add them but iTunes will not add them back to the library.
Can anyone help solve this, please?

Back up your purchased music before you upgrade, I've read at least 5 cases where purchased music has just gone.....missing.
That is not supposed to happen, didn't happen to me or thousnds of other iTunes users, but you don't want to be the 6th person, do you?
There are two things to try before you upgrade:
Barbara Hall, "Unknown Error (-208)" #1, 07:42pm Oct 19, 2005 CDT
http://docs.info.apple.com/article.html?artnum=302478

How to migrate from ascii to unicode (MaxDB 7.5)? loadercli: ERR -25347

Hi,
I use MaxDB 7.5.00.26. (Ok, I know that I should switch to 7.6, however, it is not possilble for some customer restriction for now, but should be possible quite soon).
We'd like to migrate a db from ascii to unicode. Based on the infos in the thread "Error at copying database using dumps via loadercli: error -25364" I tried the following:
Export sourcedb
1. Export catalog and data
C:\> loadercli -d db_asc -u dba,dba
loadercli> export db catalog outstream file 'C:\tmp1\20080702a_dbAsc.catalog' ddl
OK
loadercli> export db data outstream file 'C:\tmp1\20080702b_dbAsc.data' pages
OK
loadercli> exit
Import targetdb
1. Create a new empty DB with '_UNICODE=yes'
2. Set 'columncompression' to 'no'
C:\> dbmcli -d db_uni -u dba,dba param_directput columncompression no
ERR
-24979,ERR_XPNOTFOUND: parameter not found
Couldn't find this parameter e.g. in dbmgui (parameters general, extended and support)
3. Import catalog and data
C:\> loadercli -d db_uni -u dba,dba
loadercli> import db catalog instream file 'C:\tmp1\20080702a_dbAsc.catalog' ddl
OK
loadercli> import db data instream file 'C:\tmp1\20080702b_dbAsc.data' pages
ERR -25347
Encoding type of source and target database do not match: source = ASCII, target
= UNICODE.
loadercli> exit
What is wrong? Is a migration from ascii to unicode to be done somehow else?
Can I migrate a db from 7.5.00.26 to 7.6.03.15 in the same way or should it be done in another way.
It would be greate if you point me to a post etc. where these two migrations are explained in detail.
Thanks in advance - kind regards
Michael

Hi,
I can neither find "USEUNICODECOLUMNCOMPRESSION" nor "COLUMNCOMPRESSION". Could it be that there do exist from MaxDB version 7.6 on and not in 7.5?
Kind regards,
Michael
The complete parameter list (created by "dbmcli -d db_uni -u dbm,dbm param_directgetall > maxdb_params.txt") is:
OK
KERNELVERSION                         KERNEL    7.5.0    BUILD 026-123-094-430
INSTANCE_TYPE                         OLTP
MCOD                                  NO
RESTART_SHUTDOWN                      MANUAL
_SERVERDB_FOR_SAP                     YES
_UNICODE                              YES
DEFAULT_CODE                          ASCII
DATE_TIME_FORMAT                      INTERNAL
CONTROLUSERID                         DBM
CONTROLPASSWORD
MAXLOGVOLUMES                         2
MAXDATAVOLUMES                        11
LOG_VOLUME_NAME_001                   LOG_001
LOG_VOLUME_TYPE_001                   F
LOG_VOLUME_SIZE_001                   131072
DATA_VOLUME_NAME_0001                 DAT_0001
DATA_VOLUME_TYPE_0001                 F
DATA_VOLUME_SIZE_0001                 262144
DATA_VOLUME_MODE_0001                 NORMAL
DATA_VOLUME_GROUPS                    1
LOG_BACKUP_TO_PIPE                    NO
MAXBACKUPDEVS                         2
BACKUP_BLOCK_CNT                      8
LOG_MIRRORED                          NO
MAXVOLUMES                            14
_MULT_IO_BLOCK_CNT                    4
_DELAY_LOGWRITER                      0
LOG_IO_QUEUE                          50
_RESTART_TIME                         600
MAXCPU                                1
MAXUSERTASKS                          50
_TRANS_RGNS                           8
_TAB_RGNS                             8
_OMS_REGIONS                          0
_OMS_RGNS                             25
OMS_HEAP_LIMIT                        0
OMS_HEAP_COUNT                        1
OMS_HEAP_BLOCKSIZE                    10000
OMS_HEAP_THRESHOLD                    100
OMS_VERS_THRESHOLD                    2097152
HEAP_CHECK_LEVEL                      0
_ROW_RGNS                             8
_MIN_SERVER_DESC                      16
MAXSERVERTASKS                        21
_MAXTRANS                             292
MAXLOCKS                              2920
_LOCK_SUPPLY_BLOCK                    100
DEADLOCK_DETECTION                    4
SESSION_TIMEOUT                       900
OMS_STREAM_TIMEOUT                    30
REQUEST_TIMEOUT                       5000
_USE_ASYNC_IO                         YES
_IOPROCS_PER_DEV                      1
_IOPROCS_FOR_PRIO                     1
_USE_IOPROCS_ONLY                     NO
_IOPROCS_SWITCH                       2
LRU_FOR_SCAN                          NO
_PAGE_SIZE                            8192
_PACKET_SIZE                          36864
_MINREPLY_SIZE                        4096
_MBLOCK_DATA_SIZE                     32768
_MBLOCK_QUAL_SIZE                     16384
_MBLOCK_STACK_SIZE                    16384
_MBLOCK_STRAT_SIZE                    8192
_WORKSTACK_SIZE                       8192
_WORKDATA_SIZE                        8192
_CAT_CACHE_MINSIZE                    262144
CAT_CACHE_SUPPLY                      3264
INIT_ALLOCATORSIZE                    221184
ALLOW_MULTIPLE_SERVERTASK_UKTS        NO
_TASKCLUSTER_01                       tw;al;ut;2000*sv,100*bup;10*ev,10*gc;
_TASKCLUSTER_02                       ti,100*dw;30000*us;
_TASKCLUSTER_03                       compress
_MP_RGN_QUEUE                         YES
_MP_RGN_DIRTY_READ                    NO
_MP_RGN_BUSY_WAIT                     NO
_MP_DISP_LOOPS                        1
_MP_DISP_PRIO                         NO
XP_MP_RGN_LOOP                        0
MP_RGN_LOOP                           0
_MP_RGN_PRIO                          NO
MAXRGN_REQUEST                        300
_PRIO_BASE_U2U                        100
_PRIO_BASE_IOC                        80
_PRIO_BASE_RAV                        80
_PRIO_BASE_REX                        40
_PRIO_BASE_COM                        10
_PRIO_FACTOR                          80
_DELAY_COMMIT                         NO
_SVP_1_CONV_FLUSH                     NO
_MAXGARBAGE_COLL                      0
_MAXTASK_STACK                        1024
MAX_SERVERTASK_STACK                  100
MAX_SPECIALTASK_STACK                 100
_DW_IO_AREA_SIZE                      50
_DW_IO_AREA_FLUSH                     50
FBM_VOLUME_COMPRESSION                50
FBM_VOLUME_BALANCE                    10
_FBM_LOW_IO_RATE                      10
CACHE_SIZE                            10000
_DW_LRU_TAIL_FLUSH                    25
XP_DATA_CACHE_RGNS                    0
_DATA_CACHE_RGNS                      8
XP_CONVERTER_REGIONS                  0
CONVERTER_REGIONS                     8
XP_MAXPAGER                           0
MAXPAGER                              11
SEQUENCE_CACHE                        1
_IDXFILE_LIST_SIZE                    2048
_SERVER_DESC_CACHE                    74
_SERVER_CMD_CACHE                     22
VOLUMENO_BIT_COUNT                    8
OPTIM_MAX_MERGE                       500
OPTIM_INV_ONLY                        YES
OPTIM_CACHE                           NO
OPTIM_JOIN_FETCH                      0
JOIN_SEARCH_LEVEL                     0
JOIN_MAXTAB_LEVEL4                    16
JOIN_MAXTAB_LEVEL9                    5
_READAHEAD_BLOBS                      25
RUNDIRECTORY                          E:\_mp\u_v_dbs\EVERW_T3
_KERNELDIAGFILE                       knldiag
KERNELDIAGSIZE                        800
_EVENTFILE                            knldiag.evt
_EVENTSIZE                            0
_MAXEVENTTASKS                        1
_MAXEVENTS                            100
_KERNELTRACEFILE                      knltrace
TRACE_PAGES_TI                        2
TRACE_PAGES_GC                        0
TRACE_PAGES_LW                        5
TRACE_PAGES_PG                        3
TRACE_PAGES_US                        10
TRACE_PAGES_UT                        5
TRACE_PAGES_SV                        5
TRACE_PAGES_EV                        2
TRACE_PAGES_BUP                       0
KERNELTRACESIZE                       653
EXTERNAL_DUMP_REQUEST                 NO
_AK_DUMP_ALLOWED                      YES
_KERNELDUMPFILE                       knldump
_RTEDUMPFILE                          rtedump
_UTILITY_PROTFILE                     dbm.utl
UTILITY_PROTSIZE                      100
_BACKUP_HISTFILE                      dbm.knl
_BACKUP_MED_DEF                       dbm.mdf
_MAX_MESSAGE_FILES                    0
_EVENT_ALIVE_CYCLE                    0
_SHAREDDYNDATA                        10280
_SHAREDDYNPOOL                        3658
USE_MEM_ENHANCE                       NO
MEM_ENHANCE_LIMIT                     0
__PARAM_CHANGED___                    0
__PARAM_VERIFIED__                    2008-07-02 21:10:19
DIAG_HISTORY_NUM                      2
DIAG_HISTORY_PATH                     E:\_mp\u_v_dbs\EVERW_T3\DIAGHISTORY
_DIAG_SEM                             1
SHOW_MAX_STACK_USE                    NO
LOG_SEGMENT_SIZE                      43690
SUPPRESS_CORE                         YES
FORMATTING_MODE                       PARALLEL
FORMAT_DATAVOLUME                     YES
HIRES_TIMER_TYPE                      CPU
LOAD_BALANCING_CHK                    0
LOAD_BALANCING_DIF                    10
LOAD_BALANCING_EQ                     5
HS_STORAGE_DLL                        libhsscopy
HS_SYNC_INTERVAL                      50
USE_OPEN_DIRECT                       NO
SYMBOL_DEMANGLING                     NO
EXPAND_COM_TRACE                      NO
OPTIMIZE_OPERATOR_JOIN_COSTFUNC      YES
OPTIMIZE_JOIN_PARALLEL_SERVERS        0
OPTIMIZE_JOIN_OPERATOR_SORT           YES
OPTIMIZE_JOIN_OUTER                   YES
JOIN_OPERATOR_IMPLEMENTATION          YES
JOIN_TABLEBUFFER                      128
OPTIMIZE_FETCH_REVERSE                YES
SET_VOLUME_LOCK                       YES
SHAREDSQL                             NO
SHAREDSQL_EXPECTEDSTATEMENTCOUNT      1500
SHAREDSQL_COMMANDCACHESIZE            32768
MEMORY_ALLOCATION_LIMIT               0
USE_SYSTEM_PAGE_CACHE                 YES
USE_COROUTINES                        YES
MIN_RETENTION_TIME                    60
MAX_RETENTION_TIME                    480
MAX_SINGLE_HASHTABLE_SIZE             512
MAX_HASHTABLE_MEMORY                  5120
HASHED_RESULTSET                      NO
HASHED_RESULTSET_CACHESIZE            262144
AUTO_RECREATE_BAD_INDEXES             NO
LOCAL_REDO_LOG_BUFFER_SIZE            0
FORBID_LOAD_BALANCING                 NO

Conversion from MDMP to Unicode

Similar Messages

Maybe you are looking for