Conversion help
I am trying to convert a pdf file to excel, but I can't because it says it is password protected. What can I do?
Hi there,
Unfortunately the ExportPDF service will not convert password-protected files. We outline this in our FAQ document: Will Adobe ExportPDF convert any type of PDF file or have any limitations?
-David
Similar Messages
-
11i to r12 Conversion - help needed
Hi
My client is doing re-implementation of r12 and migrating from 11i to r12. I need help particularly on conversions side. The client is a SaaS company. they are considering to bring open and history transactions and applied/unapplied receipts to r12 AR.
- how to migrate revenue scheduled open/closed invoices from 11i to r12 since rev schedules for a SaaS company is expected to be long terms. and how to make sure that rev schedules are correct upon migration to r12??
- for partially paid invoices how to make sure that the same partially paid amount reflects in r12 upon conversion? can a negative line amount equalling to paid amount be a possible solution??
- upon migration do the closed invoices have to be converted as open and receipts re-applied after migration in r12 or they can be brought in as-is with status closed?
- if customer paid for an invoice using a credit card in 11i and upon migration it came to notice that the credit card is no longer used by the customer so how to re-apply the same receipt in r12 which was applied in 11i using that credit card. do we have to enable it in r12 just for closing the invoice? what could be possibilities?
please anyone if can answer would be very helpful
Thanks
-MSIt depends on the dpi. Usually 72dpi = 72 pixels per inch.
1000/72 = 13,88888 inch
1 inch = 25,4 mm
13,88888 * 25,4 = 352,7777 mm
You do the arithmatic with a calculator.
To do the same with pictures, you can do it in any image editor. Even Preview.app :
!http://www.wyodor.net/_Discussions/PreviewResize.png! -
Arabic Character set conversion-help needed
We have our main database running in 10g (Solaris o/s) & planning to move these to RAC 11g.
One of our old oracle DB(8.0.5)/solaris, which is not used till recently need to upgrade to 10g Rel2.
I know Supported direct upgrade 8.0.6/8.1.7/9i -> 10g
Current DB: 8.0.5 (Character Set: AR8ISO8859P6)
Target DB : 10g Rel 2 (Character Set: AR8MSWIN1256)
I am thinking to go the following way by using exp/imp
8.0.5(AR8ISO8859P6) -> 8.1.7(AR8ISO8859P6) -> 10G(AR8MSWIN1256)
OR
8.0.5(AR8ISO8859P6) -> 8.1.7(AR8MSWIN1256) -> 10G(AR8MSWIN1256)
please advice
thanks(1) At source db 8.0.5 (solaris)
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-YY
NLS_DATE_LANGUAGE AMERICAN
NLS_CHARACTERSET AR8ISO8859P6
NLS_SORT BINARY
NLS_NCHAR_CHARACTERSE T AR8ISO8859P6
$set NLS_LANG=AMERICAN_AMERICA.AR8ISO8859P6
$exp sys/dba file=full251109.dmp full=y
(2):>> At target db 10g R2 (solaris)
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RRRR
NLS_DATE_LANGUAGE AMERICAN
NLS_CHARACTERSET AR8ISO8859P6
NLS_SORT BINARY
NLS_NCHAR_CHARACTERSET UTF8
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
$export NLS_LANG=AMERICAN_AMERICA.AR8ISO8859P6
$imp testdba/testdba file=full251105.dmp fromuser=PROFINAL touser=PROFINAL
*$csscan testdba/testdba FULL=Y FROMCHAR=AR8ISO8859P6 TOCHAR=AR8ISO8859P6 LOG=P6check CAPTURE=Y ARRAY=100000 PROCESS=2*
There is EXCEPTIONAL DATA in .err file+
clients accessing 8.0.5 dataabase uses characterset AR8IS08859P6, which is SAME as 8.0.5 database
-CSSCAN result->>[Database Scan Parameters]
Parameter Value
CSSCAN Version v2.1
Instance Name MIG1
Database Version 10.2.0.1.0
Scan type Full database
Scan CHAR data? YES
Database character set AR8ISO8859P6
FROMCHAR AR8ISO8859P6
TOCHAR AR8ISO8859P6
Scan NCHAR data? NO
Array fetch buffer size 100000
Number of processes 2
Capture convertible data? YES
[Scan Summary]
Some character type data in the data dictionary are not convertible to the new
haracter set Some character type application data are not convertible to the new characters
[Data Dictionary Conversion Summary]
Datatype Changeless Convertible Truncation Lossy
VARCHAR2 2,235,403 0 0 *1,492*
CHAR 1,097 0 0 0
LONG 155,188 0 0 6
CLOB 24,643 0 0 0
VARRAY 21,352 0 0 0
Total 2,437,683 0 0 1,498
Total in percentage 99.939% 0.000% 0.000% 0.061%
The data dictionary can not be safely migrated using the CSALTER script
[Application Data Conversion Summary]
Datatype Changeless Convertible Truncation Lossy
VARCHAR2 16,986,594 0 0 *1,240,383*
CHAR 164,114 0 0 0
LONG 7 0 0 0
CLOB 1 0 0 0
VARRAY 1,436 0 0 0
Total in percentage 93.256% 0.000% 0.000%
6.744%
[Distribution of Convertible, Truncated and Lossy Data by Table]
USER.TABLE Convertible Truncation Lossy
PROFINAL.BASE_MASTER_DATAS 0 0 *362,003*
PROFINAL.CODE_ALLOW 0 0 *53*
PROFINAL.CODE_ALLOWANCE_TYPES 0 0 *1*
PROFINAL.CODE_BONUS_TYPES 0 0 *2*
PROFINAL.CODE_BRANCHES 0 0 *2*
PROFINAL.CODE_CERTIFICATES 0 0 *94*
Kindly help,,,
Edited by: userR12 on Nov 25, 2009 1:43 AM
Edited by: userR12 on Nov 25, 2009 1:52 AM -
File Sender Content Conversion: Help needed
Hello Experts,
i need help with file sender content conversion:
i have a file which looks like this:
12329460 24.01.09/07:01 167 Y010122851 136086 43300007 E70115 1L2_96_1
12329660 25.01.09/07:02 157 Y010122851 136086 43390007 E711J5 1L2_96_1
as you can see 8 fields, separated with whitespaces
and i want and xml file which looks like this:
<DT_DATA_FILESENDER>
<Recordset>
<Data>
<field1>12329460</field1>
<field2>24.01.09/07:01</field2>
<field3>167</field3>
<field4>Y010122851</field4>
<field5>136086</field5>
<field6>43300007</field6>
<field7>E70115</field7>
<field8>1L2_96_1</field8
</Data>
<Data>
<field1>12329660</field1>
<field2>25.01.09/07:02</field2>
<field3>157</field3>
<field4>Y010122851</field4>
<field5>136086</field5>
<field6>43390007</field6>
<field7>E711J5</field7>
<field8>1L2_96_1</field8
</Data>
</Recordset>
Would you please let me know how the datatype has to look like?
And especially how the FCC has to be configured for this scenario?
Thanks in advance,
Chris> With fixed lengths i get it working,
>
> but with de fieldseparator 0X09 it does not work,
> would you please tell me the complete FCC config not only the fieldSeparation line?
Well Christian,
There is one thing, eithere you can use fieldSeparator or fieldFixedLengths you can not use both together. So in your case do not use fieldSeparator.
The complete FCC is almost same as given in the blog in my previous reply. See the final output in that blog and create your data type accordingly. e.g.
Recordset
------Item 0...unbound
--------Field1 0..1
--------Field2 0..1
--------Field3 0..1
--------Field8 0..1
Regards,
Sarvesh -
Hi everybody. I'm new to the forum, and need your assistance.
I've recently purchased a Sony 30GB hardrive camcorder and I'm having
problems editing the movies in iMovie HD. The problem is that the camera
records movies in MPEG2 format, and in order for me to edit anything, I
need to convert the movie into MPEG4 format. I was wondering if anybody
could recomend a third party conversion software 'cause Apple doesn't
have anything like that? (so I've been told). Any help would be much
appreciated.
Thank you very much. Derek
G4 Mac OS X (10.3.9)Hi kwak,
welcome to the board
in order … to edit anything, I need to convert the movie into MPEG4 format.
no, you need to convert to "dv", only format storing every frame without (almost) any loss of pic information.. (mpegs are lossy, a delivery format)
choose, in recommended order:
* DVDxDV (free trial, 25$)
* Apple mpeg2 plugin (20$) + Streamclip (free)
* Cinematize >60$
* Mpeg2Works >25$ + Apple plug-in
* Toast6/7 allows converting to dv/import file, hit apple-k -
Pixels to mm conversion help needed!
Hi.. it's a long shot, but I am constructing a dummy web page... and need to figure out how to take 1000 pixels and convert to a mm or cm box to do a design in.
Does anyone know how to do that... as web designers say they need a 1000 pixel wide page!
I cant seem to find a conversion tool that gives just measurements...
any help appreciated....
as in iweb i just set it but cant find it in cm either!It depends on the dpi. Usually 72dpi = 72 pixels per inch.
1000/72 = 13,88888 inch
1 inch = 25,4 mm
13,88888 * 25,4 = 352,7777 mm
You do the arithmatic with a calculator.
To do the same with pictures, you can do it in any image editor. Even Preview.app :
!http://www.wyodor.net/_Discussions/PreviewResize.png! -
BSO to ASO Formula Conversion - Help Needed
ASO is not my forte...I am trying to get a simple formula to work in ASO cube as part of BSO->ASO conversion.
If it is level 0 entity, the formula is (Last Shipped (PU) * Part Volume)...works fine.
If its upper level, it should just sum the values of its children. The BSO equivalent that we typically use is @SUM(@CHILDREN(@CURRMBR("Entity"))).
I attempted the same in the ASO MDX script as shown below, it is not yielding me the correct result....any thoughts why this is not working?
Thanks in advance.
Nima
Member Formula*
CASE WHEN ISLEVEL(Entity.CurrentMember, 0) THEN+
Last Shipped (PU) x Part Volume+
ELSE+
SUM(Children(Entity.CurrentMember))+
END+
Edited by: Nima.V on Nov 12, 2008 7:12 PMHave you tried specifying which measure you want it to sum?
e.g.
CASE WHEN ISLEVEL(Entity.CurrentMember, 0) THEN
Last Shipped (PU) x Part Volume
ELSE
SUM(Children(Entity.CurrentMember), [Measure].[Part Volume])
END
also I'm not sure whether the SUM is correct. This might work as it definately specifies the tuples:
SUM({Products.CurrentMember.children},[Measures].[Part Volume])
hope it helps,
Gee -
Input file is Excel file. Should I need to convert this using the File Content Conversion(File Sender), if so can anyone pls explain me how????
thank youHi,
This Will help you,
1) With JAVA Mapping we can Achieve
/people/rahul.nawale2/blog/2006/07/18/java-mapping-an-alternate-way-of-reading-a-csv-file
( go thru the Below lines in the Blog )
http://help.sap.com/saphelp_nw04/helpdata/en/1f/0e3237e5875249e10000009b38f936/frameset.htm
Page 37
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f
/people/gregor.wolf3/blog/2006/09/01/excel-to-csv-conversion-with-a-php-web-service
Regards
Agasthuri Doss -
Hello Friends,
I need a help from you guys to achive simple scenario. My output XML file is in the foll structure (for ex):
<Test_XML>
<Data1>Welcome1</Data1>
<Data2>Welcome2</Data2>
</Test_XML>
I'm using Content conversion to write to file.At the time of writing I don't need <Data1> element to be written on the file. Is there any possiblities?
Best Rgds,
J.Hi,
Depends upon the occurences of the field on the target side..If it is (0...unbounded) or (0...1) then this elimination is possible by writing one User defined Function.
Source -> UDF -> Target Node
Select UDF Type as Queue.
Use result.addValue(ResultList.SUPPRESS)
2nd Case: If you require data1 to be configured on the Receiver Adapter as Variable substitution then the UDF is to be written to map left root node with the right root node, So no need of this field to be appeared in the target structure only.
Manish -
Hi all,
i have a problem.
I don't know how to convert a flat file that contain more than three nested level in a xml file. I tried with the content conversion but it doesn't work.
In my scenario I use a file adapter.
The structure is like the following:
Root
--fieldA
--fieldB
fieldB_1
filedB_2
fieldB_3
fieldB_3_1
fieldB_3_2
Please help me.
Thanks all!!
ManeSomeone told me that there is SAP documentations that declare maximum 2 nested level.
Is it true? -
Nikon NEF/LR5 ACR Conversion Help
Hi. I'm running into an issue when I import in RAW/NEF files into LR5 for processing that I could use some help with.
I understand the basics of RAW files, that LR5 & ACR can generally only read the basic info from the camera's sensor/EXIF file (ISO, shutter speed, exposure, wb) and pretty much dismisses customized settings the user sets in the camera when shooting. Given that I tend to do the majority of my frame set-up in-camera however, having LR5 dismiss those customized settings is creating a tremendous amount of rework with varied levels of success for me in simply getting the shot back to the same level as what I'm pulling out of the camera.
Is there a work-around or way to import Nikon's sensor data or to set up a custom color profile in LR5 that I can build to mirror Nikon's sensor data, or am I pretty much out of luck with finding an efficient solution to this issue that doesn't involve using some other third-party software to do RAW/NEF file conversion? If it makes a difference, I'm shooting with the Nikon D4. I suspect there are others shooting with the Nikon D800 and some of the newer mid-to-high end Nikon cameras that are running into this issue as well that would benefit from finding a work-around for this issue as well.
Thanks in advance for all help and suggestions.http://www.luminous-landscape.com/tutorials/understanding-series/u-raw-files.shtml
I think the above link will provide a very good appreciation of what you are experienceing. The only software that will provide the same rendition as your camera when you are making multiply adjustments to camera settings in the software provided by your camera manufacturer.
The tools are there in Lightroom for you to create presets which you can apply at import. Also there are special profiles for your camera which can be applied in the camera calibration panel which mimic some of the camera special settings. -
I am editing an NTSC program in FCPx (Project settings are 720p HD, 920x720, 29.97fps; Render format Apple ProRes 422 (HQ) )
In Compressor I am trying to ocnvert the program to PAL using the *H.264 codec (.mov). There is no "PAL" setting option for this format, but I have set the frame rate to 25fps, however my program duration is being affected, with the 30min episode coming out at around 34mins, obviously slowing down during the frame rate conversion. What can I do to prevent this?
(*Ideally I want to create a MXF format render, but Compressor seems unable to do this?)
Help much appreciated ASAP as I have a deadline of today!
thanks,
GeoffEven if you can't make MXF, you should probably still adhere to the rest of the specs, namely MPEG-2 encoding at 8MBps.
For the framerate conversion, make sure Frame Controls are On, and set length to "100% of original", and use the highest-quality frame conversion. It is very slow, but unless there are very fast-moving objects, it will produce excellent quality. Be sure target framerate is set to 25fps (it should be if you use any PAL preset.)
The company to which Russ H linked seem to make an MXF export plugin for for FCP and Compressor, though perhaps not directly for FCP-X, but I have no experience with them.
Bernd -
Need File Content Conversion Help
Hi,
With the help of the SDNers i was able to create the proper structure for FCC.Now i want to have the column names been listed as part of the final file content.with the current structure i could get only the data and not the coulmnheaders
The structure used is as below:
Recordset structure=Root,Record
Record.addHeaderLine=0
Record.fieldNames=name,mobile,email
Record.fieldSeparator=,
Record.endSeparator='nl'
Root.fieldSeparator=,
Root.fieldSeparator='nl'
Pls help me solve this.
Regards,
KarthikHI
refer the following links
File Content prameters for the Receiver Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/frameset.htm
File Content prameters for the Sender Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Refer
File Receiver with Content Conversion
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Configuring the Receiver File/FTP Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/95/bb623c6369f454e10000000a114084/frameset.htm
File content conversion sites
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please see the below links for file content conversion..
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
File Content Conversion for Unequal Number of Columns
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns - FCC
Content Conversion (Pattern/Random content in input file)
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file - FCC
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario - FCC - MDM
XI in the role of a FTP
/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp - FCC
File to R/3 via ABAP Proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - FCC
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter - EOIO - File
http://help.sap.com/saphelp_nw04/helpdata/en/ee/c9f0b4925af54cb17c454788d8e466/frameset.htm - cc
http://help.sap.com/saphelp_erp2005vp/helpdata/en/95/bb623c6369f454e10000000a114084/content.htm - fcc cOUNTER
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent
File Content prameters for the Receiver Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/frameset.htm
File Content prameters for the Sender Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Refer
File Receiver with Content Conversion
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Configuring the Receiver File/FTP Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/95/bb623c6369f454e10000000a114084/frameset.htm
File content conversion sites
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please see the below links for file content conversion..
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
File Content Conversion for Unequal Number of Columns
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns - FCC
Content Conversion (Pattern/Random content in input file)
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file - FCC
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario - FCC - MDM
XI in the role of a FTP
/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp - FCC
File to R/3 via ABAP Proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - FCC
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter - EOIO - File
http://help.sap.com/saphelp_nw04/helpdata/en/ee/c9f0b4925af54cb17c454788d8e466/frameset.htm - cc
http://help.sap.com/saphelp_erp2005vp/helpdata/en/95/bb623c6369f454e10000000a114084/content.htm - fcc cOUNTER
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent
cheers -
Please help me!
I need a program to convert a WMV video file into an AVI file.
Ive been searching programs to do this, but they all cost, and I havent got any money to buy that.
So, if you know a program to do this, a weblink, source code, etc. it must not be Java, please tell me!
Thanks
R. HollensteinAlchemy would be the way to do it, but it depends on the
particulars of ffmpeg on whether it can be done. In general, if it
can be compiled with gcc without using any platform-specific
libraries, then a program should be convertible with Alchemy.
(That's not to say every conversion will be
straightforward.) -
Unicode and ascii conversion help needed
I am trying to read passwords from a foxpro .dbf. The encrpytion of the password is crude, it takes the ascii value of each char entered and adds an integer value to it, then stores the complete password to the table. So to decode, just subtract same integer value from each chars retieved from .dbf. pretty simple.
The problem is that java chars and strings are unicode, so when my java applet retrieves these ascii values from the .dbf they are treated as unicode chars, if the ascii value is over 127 I have problems.
The question. how can i retrieve these ascii values as ascii values in java?
Should I use an InputStream like:
InputStream is=rs.getAsciiStream("password");
Is there a way to convert from unicode to extended ascii?
Some examples would be helpful, Thanks in advance.version 1
import java.nio.charset.Charset;
import java.nio.ByteBuffer;
import java.nio.CharBuffer;
class Test {
static char[] asciiToChar(byte[] b) {
Charset cs = Charset.forName("ASCII");
ByteBuffer bbuf = ByteBuffer.wrap(b);
CharBuffer cbuf = cs.decode(bbuf);
return cbuf.array();
static byte[] charToAscii(char[] c) {
Charset cs = Charset.forName("ASCII");
CharBuffer cbuf = CharBuffer.wrap(c);
ByteBuffer bbuf = cs.encode(cbuf);
return bbuf.array();
}version 2
import java.io.*;
import java.nio.charset.Charset;
class Test {
static char[] asciiToChar(byte[] b) throws IOException {
Charset cs = Charset.forName("ASCII");
ByteArrayInputStream bis = new ByteArrayInputStream(b);
InputStreamReader isr = new InputStreamReader(bis, cs);
char[] c = new char[b.length];
isr.read(c, 0, c.length);
return c;
static byte[] charToAscii(char[] c) throws IOException {
Charset cs = Charset.forName("ASCII");
ByteArrayOutputStream bos = new ByteArrayOutputStream();
OutputStreamWriter osw = new OutputStreamWriter(bos, cs);
osw.write(c, 0, c.length);
osw.flush();
byte[] b = bos.toByteArray();
return b;
} -
Pricing : ABAP to Java conversion help needed
Hi all.
I am basically an ABAP developer. My recent assignment needs some java coding.
It will be very helpful if we anybody helps me in finding the corresponding pricing fields in java.
The abap code is as follows
check : xkomv - kgrpe = ' '.
check: xkomv - xkbetr ne 0.
check : komp - kpein ne 0.
if komp - netwr < 0.
komp - netpr = 0 - komp - netpr.
endif.
xkwert = ( ( ( komp - netpr * ( 100000 + xkomv - xkbetr)) / 100000)
komp-mglme / komp-kumza * komp - kumne / 1000 / komp - kpein )
- komp-netwr.
Please help in converting this abap code to its corresponding java code.
Thanks and Regards
DeepikaHere is the code I have developed: Please check and let me know if there are any changes
import java.math.BigDecimal;
import com.sap.spe.pricing.customizing.PricingCustomizingConstants;
import com.sap.spe.pricing.transactiondata.PricingTransactiondataConstants;
import com.sap.spe.pricing.transactiondata.userexit.IPricingConditionUserExit;
import com.sap.spe.pricing.transactiondata.userexit.IPricingItemUserExit;
import com.sap.spe.pricing.transactiondata.userexit.ValueFormulaAdapter;
public class ZS2S_IPC_ZDCP extends ValueFormulaAdapter {
public BigDecimal overwriteConditionValue(
IPricingItemUserExit item,
IPricingConditionUserExit condition) {
BigDecimal kompKumza = new BigDecimal(String.valueOf(condition.getFraction().getNumerator()));
BigDecimal kompKumne = new BigDecimal(String.valueOf(condition.getFraction().getDenominator()));
boolean xkomvKgrpe = condition.isGroupCondition();
BigDecimal kompKpein = condition.getPricingUnit().getValue();
BigDecimal kompNetwr = item.getNetValue().getValue();
BigDecimal kompNetpr = item.getNetPrice().getValue();
BigDecimal xkomvKbetr = condition.getConditionRate().getValue();
BigDecimal kompMglme = item.getBaseQuantity().getValue();
if ( xkomvKgrpe = true )
return PricingTransactiondataConstants.ZERO;
if ( kompKumza != PricingTransactiondataConstants.ZERO )
return PricingTransactiondataConstants.ZERO;
if ( kompKumne != PricingTransactiondataConstants.ZERO )
return PricingTransactiondataConstants.ZERO;
if ( kompKpein != PricingTransactiondataConstants.ZERO )
return PricingTransactiondataConstants.ZERO;
if (kompNetwr.compareTo(PricingTransactiondataConstants.ZERO) < 0 )
kompNetpr = (PricingTransactiondataConstants.ZERO).subtract(kompNetwr);
BigDecimal y = new BigDecimal("100000");
BigDecimal a = y.add(xkomvKbetr);
BigDecimal temp = kompNetpr.multiply(a);
BigDecimal result1 = temp.divide(y, 2, BigDecimal.ROUND_HALF_UP);
BigDecimal result2 = result1.multiply(kompMglme)
.divide(kompKumza, 2 BigDecimal.ROUND_HALF_UP).multiply(kompKumne).divide(kompKpein, 2, BigDecimal.ROUND_HALF_UP);
BigDecimal Result = result2.subtract(kompNetwr);
return Result;
Edited by: Deepika Mallya on Aug 6, 2009 9:08 AM
Maybe you are looking for
-
Memory Limitation on EXPORT & IMPORT Internal Tables?
Hi All, I have a need to export and import the internal tables to memory. I do not want to export it to any data base tables. is there a limitation on the amount of memroy that is can be used for the EXPORT & IMPORT. I will free the memory once I imp
-
How do I recover from a crash?
-
Query level formula is not working for all the amounts
Hi Friends, In my production system I found new thing that in my query level I done some calculation (as per my requirement I done amount devide by 100 to get correct values) It is working for all the amounts except 1or 2 amounts, im uploading same s
-
Much longer down loading websites now.
This is my first time doing this. So I may not be helping you help me. But here it goes... Over the last few weeks my mac has gotten noticeably slower downloading websites- like sometimes close to a minute, and I don't know if this is a clue but la
-
Transparent Persistence with TopLink?
I had the impression that TopLink allowed for 'transparent' persistence. I would expect, therefore, that I would be able to make persistent objects that have no reference to any TopLink classes/interfaces. The only reference to 'transparent' that I s