Conversion logic for the following!!

Hi,
Experts
can you help me to build a conversion logic for the following
1.BKPF-BLART .setting it to 'ZF'.
2.BKPF-MONAT derived from posting date
3.BKPF-WAERS set to GBP
4.Dr/.Cr indicator BSEG-SHKZG.
If Posting Key (BSEG-BSCHL) is u201840u2019 then this indicator (BSEG- SHKZG)is u2018Su2019 (Debit)
If Posting Key (BSEG-BSCHL) is u201850u2019 then this indicator (BSEG- SHKZG)is u2018Hu2019 (Credit)
5.a)If Cost Object Type is u2018Cu2019 (= Cost Centre), then Cost Collection Object Id shall be mapped to BSEG- KOSTL.
       BSEG- PRCTR should be derived from the Cost Centre Master data CSKS- PRCTR.
       Effective date should fall between the validity dates CSKS-DATAB and CSKS-DATBI
b)If Cost Object Type is u2018Iu2019 (= Internal Order), then Cost Collection Object Id shall be mapped to BSEG- AUFNR.
       BSEG - PRCTR should be derived from the Internal Order Master data AUFK-PRCTR
c)If Cost Object Type is u2018Wu2019 (= Work Breakdown Structure element), then Cost Collection Object Id shall be mapped to BSEG-PROJK.
       BSEG - PRCTR should be derived from the WBS Master data PRPS-PRCTR
d)If Cost Object Type is u2018Pu2019 (= Profit Centre), then Cost Collection Object Id shall be mapped to BSEG - PRCTR.
6.Ledger Group BKPF-LDGRP. Set it to u2018Blanku2019 so that the document is posted to all ledgers.
7.Set BSEG-KOKRS (Controlling Area) to 1000.

Please do not dump your specs here expecting others to do you work.
matt

Similar Messages

Need Mapping logic for the following scenario

Hi everyone,
I need a mapping logic for the following scenario.
For the same order no with same material no, the quantity should be summed and only one idoc should be created.
For the same order no with different material no, no need to sum the quantity and only one idoc should be created.
For example:
Source Structure:
Ord No      Mat No      QTY
12               1               2
13               1               3
13               2               1
12               2               4
15               1               5
14                3              7
12               1              6
Target Structure:
Ord No      Mat No      QTY
12               1               8
12               2               4
13               1               3
13               2               1
14               3              7
15               1              5
Thanks in Advance

Try the graphical mapping as shown below using concat with a space as delimite and UDF to split the value again by space.
1. Idoc node
(RootContext)
OrdNo
     |concat[ ] -> sort[asending] -> SplitByValue -> collapseContexts -> Idoc
MatNo                case sensitive    [ValueChange]
(RootContext)
2. OrdNo
OrdNo(RC)
     |concat[ ] -> sort[asending] ->SplitByValue->collapseContexts->SplitByVale-> UDF to fetch ordno -> OrdNo
MatNo(RC)           case sensitive    [ValueChange]                [eachValue]   (return var1.split(" ")[0];)
3. MatNo
OrdNo(RC)
     |concat[ ] -> sort[asending] -> SplitByValue ->collapseContexts->SplitByVale-> UDF to fetch ordno -> MatNo
MatNo(RC)              case sensitive    [ValueChange]                  [eachValue]   (return var1.split(" ")[1];)
4. Qty
               [asending,case sensitive]
               -- sortByKey -----> formatByExample -> sum ->Qty
OrdNo(RC)           |          |          ^
     |concat[ ] -> |            Qty(RC)          |
MatNo(RC)           |                |
               --sort[asending]-> SplitByValue
                   case sensitive    [ValueChange]
Regards,
Sunil Chandra

Extract file...I want the logic for the following case.

Hi Guys,
i_final having the following inputs.
I_FINAL
MATNR      MAKTX          CHARG
SK45        PROSK         A
SK45        PROSK
SK45        PROSK        02/2007
BP013       PROSK
BP014       PROSK       02/2007
I want the following output.
I_FINAL
MATNR      MAKTX          CHARG
SK45        PROSK         A
SK45        PROSK        02/2007
BP013       PROSK
BP014       PROSK       02/2007
In the above case for MATNR-SK45 if CHARG is space & has other entries then it should not display SPACE in the CHARG field.
In case of BP013 if CHARG is space & has no Other entries means, no other line items, it should display the SPACE in the CHARG field.
NOTE: No duplicate records for the Field CHARG.
can you tell me the logic using the above example ..
Please help me.I need Urgent..

Exactly what issues are you having with the autonaming? What is the file name going to be based on? There are all sorts of conversion functions. You might need to convert a number to a string and then something like the Build Path or String to Path functions. The Write LabVIEW Measurements File has an option to autoname files. You can look at how it's done there by simply right clicking on the function and selecting Open Front Panel.

Need conversion logic for the xml sending from legacy system ...!!!

Hi Experts ,
we have one requirement where in the legacy system ( Sender system) is sending .xml file and PI needs to pick the file and send it to ECC Via IDOC AAE Receiver Adapter to R/3 (SAP ECC) System .
The problem is the .xml file which PI receives is in a different format which is shown below
</tns:Header>
 <tns:Body>
 <esa:Payload>
 <esa:Header>
 <PayloadName></PayloadName>
 <PayloadVersion>1.0</PayloadVersion>
 <PayloadCreated>2014-01-07T02:39:55.793Z</PayloadCreated>
 <PayloadSize units="Bytes">432</PayloadSize>
 </esa:Header>
 <esa:Data>
 <zcs:HUM xmlns:zcs="com.">
 <Hum_Number>00393155965135748871</Hum_Number>
 <Source_Storage_Location>9000</Source_Storage_Location>
 <Destination_Storage_Location>0100</Destination_Storage_Location>
 <Material_Number>000000000000004123</Material_Number>
 <Batch_Number>321940071 </Batch_Number>
 <Quantity>0000000096000</Quantity>
 <Production_Version>A100</Production_Version>
 <Hostname>POSPI000003</Hostname>
 </zcs:HUM>
 </esa:Data>
 </esa:Payload>
 </tns:Body>
</tns:Envelope>|]
need help to convert this .xml into PI Standard xml format ( i mean without esa,zcs, ..So that at PI the message gets passed successfully without throwing xml parser issue or xml well not formed error .) .
do i need to write any java code for this ?
Please experts needs your suggestions here .
regards,
khan ,

Hi Aziz,
please make sure your pasted xml has start and end tags
<tns:Body> </tns:Body>.
i don't think you need to change the external definition. make sure that you use xslt mapping first then message mapping.
Regards,
Muni.

Provide the java code for the following scenario.

Hi Experts,
I have tried with all the combinations for this scenario. As per my understanding i require java code for the following scenario
so that it becomes easy........
I require a Message mapping for this Logic.
In the Source there are 4 fields and, the Target side, the fields should appear like this.
Source Structure- File
Record
|-> Header
Order_No
Date
|-> Item
Mat_No
Quantity
Target Structure-IDoc
IDoc
|-> Header
|-> Segment
Delivery_Order_No
Recv_Date
|-> Item
|-> Segment
Delivery_Order_No
Material_Num
Recv_Quantity.
The Logic is for every Order number an IDOC is generated.And if the Material num matches then the quantity should be added. and important note is that the material numbers are different for every order number. That means if a material number is 2 in the order number A. Then the material number can never be 2 in any of the order numbers.Here is the following with an example for the above scenario.
For example:-
we have
Source Structure- File
Order-no Date Mat_No Quantity
1 01/02/2011 A 10
1 01/02/2011 B 15
1 01/02/2011 A 10
2 01/02/2011 C 10
2 01/02/2011 C 10
3 01/02/2011 D 20
3 01/02/2011 D 10
3 01/02/2011 E 25
Target Structure-IDoc
Delivery_Order_No Recv_Date Material_Num Recv_Quantity
1 01/02/2011 A 20
1 01/02/2011 B 15
2 01/02/2011 C 20
3 01/02/2011 D 30
3 01/02/2011 E 25
So for this example total of 5-Idocs created. That means for this example if Order_No is 1 When the Mat_No is A the quantity gets added. For this Scenario 1 IDoc with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) is generated by adding the quantity field in the Target Side. Similarly if Order_No is 1 when the Mat_No is B then separate IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) in the Target Side. Similarly, if Order_No is 2 when the Mat_No is C, an IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) by adding the quantity field in the Target Side. ike wise the process goes on upto 3.Kindly do the needy..
Kindly provide the java code.
Thanq very much in advance..

what i have understood from ur example is that u want to generate an idoc for unique combination of Order-no and Mat_No
if yes then chk the below mapping..
change the context of Order_No, Date, Mat_No and Quantity to Record (right click-> context)
1)
Order-no
----------------------concat[;]---sort----splitbyvalue(valuechanged)-----collapse context---IDoc
Mat_No
2)
Order-no
--------concat[;]---sort----splitbyvalue(value changed)---collapse context---UDF1--splitbyvalue(each value)--Delivery_Order_No
Mat_No
3)
Order-no
-----------concat[;]---sortbykey----------------------- \
Mat_No                       /                            \
Date--------------- /                                       \
----------------------------------------------------------FormatByExample-----collapsecontext---splitbyvalue(each value)----Recv_Date
Order-no                                                 /
-----------concat[;]---sort----splitbyvalue(value changed)
Mat_No
4)
Order-no
--------concat[;]---sort----splitbyvalue(value changed)---collapse context-UDF2--splitbyvalue(each value)--Material_Num
Mat_No
5)
Order-no
-----------concat[;]---sortbykey
Mat_No                       /
Quantity --------------- /
----------------------------------------------------------FormatByExample-----SUM(under statistic)----Recv_Quantity
Order-no
-----------concat[;]---sort----splitbyvalue(value changed)
Mat_No
UDF1:
String [] temp= a.split(";");
return temp[0];
UDF2:
String [] temp= a.split(";");
return temp[1];

Sender FCC for the following structure.

Hi,
I am using the following source structure:
<Goods> 0..unbounded(Data Type)
 <HeaderData>(1..1)
 <1>
 <2>
 <3>
 <ItemData>(1..unbounded)
 <10>
 <11>
 <12>
 <13>
 <n>
1:What will be the FCC details for the above structure?
2:Solution for the following error:
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: 'xml.documentName' is a mandatory parameter if more than one recordset per message is specifiedMandatory parameter 'xml.keyfieldName': no value found"
Regards,
Vishal.

P836340 wrote:>
> 1:What will be the FCC details for the above structure?
Document Name: your msg type
Document Offset:
Recordset Name:
Recordset Namespace:
Recordset Structure: HeaderData,1,ItemData,*
Recordset Sequence: Ascending\Descending
Recordset per Message: *
KeyField Name: give one value which u want to use as a key
KeyField Type: String(Case Sensitive)
header.fieldFixedLengths fix length according to your requirement eg: 2,2,2
header.keyFieldValue value of field which fixed as key field in header
header.fieldNames 1,2,3
body.fieldFixedLengths fix length according to your requiremen eg: 2,2,2,2
body.keyFieldValue 02 value of field which fixed as key field in item
body.fieldNames 10,11,12,13
> 2:Solution for the following error:
> "Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: 'xml.documentName' is a mandatory parameter if more than one recordset per message is specifiedMandatory parameter 'xml.keyfieldName': no value found"
It is because you would have missed the values for the mandatory fields like documentName and keyfieldName
Thanks,
Arivarasu
Edited by: Arivarasu S on Aug 5, 2009 9:32 PM
Edited by: Arivarasu S on Aug 5, 2009 9:33 PM
Edited by: Arivarasu S on Aug 5, 2009 9:35 PM

In web dynpro i want explanation/definition for the following things

Hi dudes,
I want explanation *** definition for the following
(1) web dynpro
(2) Cardinality
(3) methods
(4) Nodes
(5) Attributes
(6) Interface
(7) Views
(8) Windows
(9) Mapping
(10)Binding
(11)Model
(12)Controller

Hi,
Here are the defintions for the terms you hav requested-
Web Dynpro Architecture
Definition
Web Dynpro is the SAP NetWeaver programming model for user interfaces (UIs).
The Web Dynpro model is based on the Model View Controller paradigm, and has the
following features that build on the classic dynpro model:
Clear separation of business logic and display logic
Uniform metamodel for all types of user interfaces
Execution on a number of client platforms
Extensive platform independence of interfaces
Web Dynpro provides support for developing Web representation of a business application.
You use specific tools to describe the properties of a Web Dynpro application in the form of
Web Dynpro metadata. The necessary source code is then generated automatically and
executed at runtime. In addition to the events offered by the framework, you can also define
your own events for a Web Dynpro application. However, the event handling must always be
programmed in separate source code areas which are executed automatically when the event
is triggered at runtime.
In Web Dynpro, each user interface is always made up of the same basic elements. These
elements of the metamodel can be statically declared using Web Dynpro tools.
It is also possible to implement elements of the metamodel at runtime and to change them or
reintegrate them at runtime. Using these implementations, you can make any changes or
enhancements to a user interface that has been created by declarative methods by
generating new interface structures at runtime.
This means that you can combine declarative processes and the implementation of source
code.
A Web Dynpro component is a reusable entity. It summarizes all components that are
required as part of this programming unit for an executable Web Dynpro application.
The Web Dynpro component concept offers a number of advantages:
Structuring of the programming
Creation of easily manageable application blocks
Reusability of whole components
Decoupling of software projects in both time and space
The Web Dynpro component contains any number of windows and views and their
corresponding controllers. Additional Web Dynpro components can also be referenced.
View
A view describes the layout and behavior of a rectangular area of a user interface.
Every Web Dynpro application has at least one view. The layout of a view is made up of
different user interface elements, which can be nested in each other. The positioning of
interface elements in one view is supported by the supplied layout variants.
In addition to the visible part, the layout, a view also contains a controller and a context. The
data to which the elements of the view can be bound are stored and managed in the view
context, enabling them to be represented or used on the screen. The view controller can
contain methods for data retrieval or for processing user input.
Window
A window is used to combine several Views and View Sets (the concept of view sets is only
offered in Web Dynpro for Java). A view can only be displayed by the browser if it has been
embedded in a window. A window always contains one or more views, which are connected
by navigation links. One of these views, or a view set, is specified as the start view and is
displayed the first time the window is called.
Windows have inbound and outbound plugs.
Inbound Plugs and Outbound Plugs
A window has one or several inbound or outbound plugs. Using these plugs, a window can be
included into a navigation chain. The concept of these plugs corresponds to the concept of
the plug for a view. Each plug of a window is visible within the entire window and can be used
for navigating within this window. In addition, one or several plugs can be made accessible to
the component interface so that they are visible even beyond the limits of the component in
question. They thus belong to the interface view of the relevant window.
They are used to navogate from one view to other and pass the data between the views. Which view to be called next from current view - the flow of views is descriebd here using Plugs.
Controller
Controllers are the active parts of a Web Dynpro application. They define how the user can
interact with the Web Dynpro application. The data that a controller can access is defined in
the corresponding context. Different instances of controllers and contexts exist within a Web
Dynpro application.
View Controller
Each view has exactly one view controller, which processes the actions performed by the user in the view.
A view also has exactly one view context, which contains the data required for the view.
Interface Controller
Each Web Dynpro component contains exactly one component controller. This controller is a
global controller that is visible also outside the component. It is thus part of the interface of a
Web Dynpro component.
Context
Definition
The data used in the component or in the view are stored in the context. Read-write access to
this data is available using the controllers as a starting point.
Structure
The data from the contexts is managed in a hierarchical structure. Each context has a root
node, underneath which the individual data fields (attributes) are stored in a tree structure.
You create this tree structure according to the structure of your application.
CONTEXT is generally called as a ROOT Node.
Each context has nodes and attributes also.
Cardinatlity
Each node contains data fields that represent one of the following:
u2022
An individual instance of an object type
u2022
A table of instances.
This property of a node is known as its cardinality. The following table summarizes the
possible cardinalities for a node:
Cardinality Description
1:1 The node contains only one element instance, which is instantiated automatically.
0:1 The node contains only one element instance, which must not be instantiated.
1:n The node can contain multiple element instances, of which at least one must always be
instantiated (and is instantiated automatically).
0:n The node can contain multiple element instances, of which none have to be instantiated.
Further information about this and other properties of context nodes is available in the section
Context-Nodes: Properties.
Recursion Nodes
Dynamic node nesting is possible within a context, creating what is called a recursion node.
The node that is used for recursion is always a predecessor of the new node. The newly
created recursion node is a reference to a predecessor node and therefore cannot be
processed separately. Instead it takes on the structure of the node to be repeated.
Data Binding and Mapping
Within the Web Dynpro architecture, the contexts of the different controllers can be linked in
different ways:
u2022
A UI element of the user interface of the view can be linked with an element of the view
context.
u2022
A mapping can be defined between two global controller contexts, or from a view
context to a global controller context.
The context of a global controller can be linked to a Web Dynpro Model.
Defining Mapping Between Two Contexts
The elements of a view context can be locally defined. In this case (represented in the graphic
below as a "Local Node"), all the contained attributes are only visible within the relevant view.
When the view disappears, the attribute values are deleted.
Event
The component controller allows you to create events.
Events are used to communicate between controllers and enable one controller to trigger
event handlers in a different controller.
Cross-component communication can be implemented using the interface controlleru2019s events.
Events that were created in the component controller are visible within the component only.
Inbound Plugs
Inbound plugs in a view also react like an event. Therefore, when a view is called using an
inbound plug, the event handler that is optionally available for the inbound plug is always
called first. In this case event handling takes place within the current view controller.
UI Element Events
Some UI elements, such as the Button element have special events that are linked with user
actions. These events are predefined and have to be linked with an action at design time.
Actions for UI Element Events
Some UI elements such as the button element can react to a useru2019s interaction: clicking on
the corresponding pushbutton can trigger a handling method to be called within the view
controller. Such UI elements are equipped with one or several general events, which can be
linked with a specific action at design time (switching to a subsequent view, for example). If
such an action is created, an event handler method for this action is created automatically. In
this way, you can equip a UI element event (which has been inserted several times into a
view) with different actions as necessary. The event is then processed by the corresponding
event handler depending on the action that is linked.
Interfaces of Web Dynpro Components
Each component has an interface in order to enable communication between Web Dynpro
components and to enable a component to be called up by a user. This interface consists of
two parts:
Interface View of a Window Contained in a Component
The interface view of a Web Dynpro window is used to link a window with a Web Dynpro
application that can be called by the user.
Reward if helpful.
Best Wishes,
Chandralekha

Errors with the global conversion rule for the field 0SOURSYSTEM.

Hello Gurus,
We are implementing CRM Activities. I enhanced the data source and when I add new info objects to 0SAL_DS01 DSO and trying to activate I'm getting there errors. Can some one please help me out in this problem?
Error in global conversion rule for InfoObject 0SOURSYSTEM
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0SOURSYSTEM.
System Response
The function module delivers the following error message:
Field "" is unknown. It is neither in one of t
Procedure
Check the definition of the global conversion rule for an InfoObject
What does this error mean? We are using BI 7.
Thanks
RKR

I have around 9 source systems, do I have to maintain data for all of them for 0SOURCESYSTEM?
I set data for CRM system and then tried to activate.. but still I'm getting same error.
I;m getting this warning too...
InfoObject 0FISCVARNT needs to be in key for DataStore object C_0SAL_D
Message no. RSDODSO123
Diagnosis
Characteristic 0FISCVARNT is included in the data part of ODS object C_0SAL_D.
System Response
The fiscal year variant cannot be used in the update rules for calculating business hour characteristics.
Does this matter???
Thanks
RKR
Message was edited by:
RKR M

" No entry in the conversion table for the syntax group" error

Hi,
Iu2019m getting an error in the port setup when I try to run an Access Test on the logical directory.
Definition of path
TFTS02\INTF\RD1\OUTB\MM\RFC WINDOWS NT missing
Message no. SG024
Diagnosis
There is no entry in the conversion table for the syntax group WINDOWS NT and the logical path
TFTS02\INTF\RD1\OUTB\MM\RFC.
System Response
The system cannot generate a platform-specific path.
Procedure
Make an entry for the syntax group WINDOWS NT and the logical Pfad
TFTS02\INTF\RD1\OUTB\MM\RFC in the conversion table using the FILE transaction.
Regards,
Rajiv

Hi
the error is simple. The path
TFTS02\INTF\RD1\OUTB\MM\RFC you are trying to access is not there so create the path in the FILE transaction.
In file tcode goto NEW ENTRIES and give the path and also make sure that in AL11 the path and the filename you are trying to open exists.
Thanks & Regards
Jyo

Function modules for the following

Hi,
I want to know the function modules for the following purposes.
1) Check whether a date is valid or not
2) Calculate the no of days between two dates.
Expecting an early response.
Thanks n Regards,
Amit

Hi,
PARAMETERS: p_list LIKE t009b-bumon AS LISTBOX
 VISIBLE LENGTH 11 OBLIGATORY ,
 p_list1 LIKE t009b-bdatj OBLIGATORY.
SELECTION-SCREEN POSITION POS_HIGH.
PARAMETERS: p_list2 LIKE t009b-bumon AS LISTBOX
 VISIBLE LENGTH 11 OBLIGATORY,
 p_list3 LIKE t009b-bdatj OBLIGATORY.
Calling Function Module for calculating no of days between the
selected period
 CALL FUNCTION 'NUMBER_OF_DAYS_PER_MONTH_GET'
 EXPORTING
 par_month = p_list
 par_year = p_list1
 IMPORTING
 par_days = ws_n_days.
 CALL FUNCTION 'NUMBER_OF_DAYS_PER_MONTH_GET'
 EXPORTING
 par_month = p_list2
 par_year = p_list3
 IMPORTING
 par_days = ws_n_days1.
For Concatenating the month and year into the date format
 CONCATENATE p_list1 p_list ws_i INTO ws_c_date1.
 CONCATENATE p_list3 p_list2 ws_n_days1 INTO ws_c_date2.
date = ws_c_date1 - ws_c_date2.
In the above sample code the selection screen has month and year as input.
Also check this link
http://www.sapdevelopment.co.uk/tips/date/datehome.htm
Check FM
RP_CALC_DATE_IN_INTERVAL Add/subtract years/months/days from a date
SD_DATETIME_DIFFERENCE Give the difference in Days and Time for 2 dates
Also for checking valid date:
U can specify the date field as
Select-options: s_date like likp-date(similar to ur requirement)
This itself ceck for the valid date no seperate validation needed.
Thanks & Regards,
Judith.

Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason: The handle is invalid.

I'm stuck here trying to figure this error out.
2003 domain, 2012 hyper v core 3 nodes. (I have two of these hyper V groups, hvclust2012 is the problem group, hvclust2008 is okay)
In Failover Cluster Manager I see these errors, "Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason: The handle is invalid."
I restarted the host node that was listed in having the error then another node starts showing the errors.
I tried to follow this site: http://blog.subvertallmedia.com/2012/12/06/repairing-a-failover-cluster-in-windows-server-2012-live-migration-fails-dns-cluster-name-errors/
Then this error shows up when doing the repair: there was an error repairing the active directory object for 'Cluster Name'
I looked at our domain controller and noticed I don't have access to local users and groups. I can access our other hvclust2008 (both clusters are same version 2012).
<image here>
I came upon this thread: http://social.technet.microsoft.com/Forums/en-US/85fc2ad5-b0c0-41f0-900e-df1db8625445/windows-2012-cluster-resource-name-fails-dns-registration-evt-1196?forum=winserverClustering
Now, I'm stuck on adding a managed service account (mas). I'm not sure if I'm way off track to fix this. Any advice? Thanks in advance!
<image here>

Thanks Elton,
I restarted 3 hosts after applying the hotfix. Then I did the steps below and got stuck on step 5. That is when I get the error (image above). There
was an error repairing the active directory object for 'Cluster Name'. For more data, see 'Information Details'.
To reset the password on the affected name resource, perform the following steps:
From Failover Cluster Manager, locate the name resource.
Right-click on the resource, and click Properties.
On the Policies tab, select If resource fails, do not restart, and then click OK.
Right-click on the resource, click More Actions, and then click Simulate Failure.
When the name resource shows "Failed," right-click on the resource, click More Actions, and then click Repair.
After the name resource is online, right-click on the resource, and then click Properties.
On the Policies tab, select If resource fails, attempt restart on current node, and then click OK.
Thanks

14th May 2013. We placed an order on medIT (Medit Information Technology)for the following items: 6 units of Apple iMAc-All_in-one-1 core i

14th May 2013.
We placed an order on medIT (Medit Information Technology) for the following items:
6 units of Apple iMAc-All_in-one-1 core i5 2.9 GHz-RAM 8GB-HDD 1x1tb-GF GTX 660M- Gigabit LAN-WLAN : 802.11 a/b/g/n, Bluetooth 4.0-OS x 10.8 Mountain Lion- Monitor : LED 27”wide- keyboard: English.
We paid to their account; Bank of Cyprus Public Company Limited the full invoice value.
As of today 14th May 2013 we are still waiting for delivery of the goods despite numerous advices that a partial order of 3 items the order has been shipped.
We have made numerous follow up calls to medIT directly and through other customers of medIT, but we have no clue as to when we will receive the goods. On 29th April, 2013 they gave us a FEDEX airwaybill no..We regret that we have not been able to trace this airwaybill on the FEDEX system.
We are, therefore, pleading for assistance from any support group to link us with the right department so that we can have accurate information on the movement of this parcel.
These items were ordered for a government department of the Republic of Zambia and this non-delivery is creating a bad name for Apple Resellers covering Zambian market. The project upgrade of the project is now falling behind due to non-delivery on our part arising from the non-performance on the part of medIT.
We can make available for inspection copies of the order and remittance details to the appropriate office for review and ready reference.
We can be contacted directly on “James A. Ngoma”
<Personal Information Edited by Host>

If you ordered from MedIT in Cyprus, they do not appear to be an authorized Apple reseller. If they are indeed not authorized by Apple, there will be nothing Apple will be able to do to assist you in this matter. You will need to work the problem out with MedIT, obtaining legal assistance in Cyprus if necessary.
Regards.

Variable Substitution need to define pay load for the following structure

Hi All
Please help me for defining the pay load for the following structure for the Variable Substitution
for genearing the file dynamically fro the payload
Target structure is like this
MT_RFQ_IND_IDOC_MYSPACE_TARGET............> my message type
 <HEADER>
 < FileName>
 <INDI>
 <RFQNO>
 <DOCUTYPE>
 < ITEM>
 <FEILD1>
 <FEILD2>
 <FEILD2>
please help me
thanking you
Sridhar

Hi,
should this var1 given in any data type of my IR - No
in variable substitution, in value give the complete thing which i said above in italics i.e. payload:MT_RFQ_IND_IDOC_FILE_TARGET,1,hEADER,1,FileName,1
which user you used for CPACache refresh - it can only be done by XIDIRUSER.
Regards,
Rajeev Gupta
Edited by: RAJEEV GUPTA on Feb 6, 2009 7:34 AM
Edited by: RAJEEV GUPTA on Feb 6, 2009 7:35 AM

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

Can anyone tell me the field name, table name for the following scenario?

Hi All,
Can anyone tell me the field name and the respective table name for the following scenario's?
1. A report to list all the materials to which Invoice is done and delivery is pending.
2. A report for Order tracking.
3. A report, which gives PO(Purchase Order), Pricing details.
4. A report, which calculates the MATERIAL COST. It will select all the material issued for the entered service order number from stock.
Thanks & Regards,
P.Gowrishanker
Edited by: Gowrishanker pari on Jun 1, 2008 8:58 AM

I believe that OmniVision Technologies has the contract for the 3gs.

Conversion logic for the following!!

Similar Messages

Maybe you are looking for