Conversion of a file with 2 converters in UCM / IBR?

Hi Folks,
This might be a basic question, but would be helpful in making a key decision in our use case.
Can we configure 2 conversions for a single file format? As we would like to convert each incoming jpeg file into PDF as well as getting the image renditions.
To get the incoming jpeg file with different renditions, we have configured DAM. In the file formats > jpeg : Digital Media Graphics if configured, then we get the image converted into different renditions like Web, Thumbnail and Preview.
To get the incoming Jpeg file into PDF, In the file formats > jpeg : Direct PDF export if configured, then we get the image converted into PDF.
But what we would like is both, as i cannot define both the conversions for the same file format jpeg? We would like the image to be converted into pdf as the Web Viewable format and also with the rendition data. Any pointers here?
Can each file format supports only one conversion?
Regards
Prabhu

Hi,
Have you solved this problem?
Regards
Carlos

Similar Messages

Bad conversion for RAW file with Maverick

Hello,
I own a SONY Alpha A6000 camera. When I shoot my pictures in JPEG, no trouble. When I shoot my pictures in RAW, the pictures are overexposed after conversion in iPhoto.
In the list of camera supported by iPhoto (and Aperture), the SONY Alpha A6000 is not present.
Can you tell me when we will have a new update for RAW conversion with Maverick ?
OS X 10.9.3
iPhoto 9.5
Thank you ;-)
Bruno.

It looks like we have been speaking/writing at cross purposes
Your question raised two aspects - the RAW support for your specific camera, and how raw support is working in Aperture and iPhoto generally.
You are right, the camera is not on the list of supported cameras. Apple is not supporting all cameras, and some will never be supprted. I am waiting since four years for the support of my camera. Since your camera is not supported, you should not be using the raw with Aperture or iPhoto. As I pointed out, it is a bug, that you are able to process the RAW files at all in iPhoto or Aperture. iPhoto is using the RAW conversion for a different camera. Be careful, when Apple corrects this bug, you may no longer be able to open these RAW files in iPhoto.
But the second problem is the over exposure. It is unlikely, that this is due to using the RAW support designed for a different camera. We are seeing this problem continually in the Aperture forum, when in-camera settings are used. It is due to the fact, how Apple's RAW developement works. It disregards in-camera tags. You will see the same effect, when the proper RAW support for your camera will finally be released. That is why I pointed you to Keith Barkley's great user tip. It describes the only safe way to work with RAW photos in Aperture and iPhoto:
( The Big Three: Setting your camera for the best Aperture RAW results)
As long as you are using in-camera settings, you will never see in your camera generated previews, what the RAW files are like, that you are recording.
And we cannot predict, if and when your camera will be supported.

Conversion of fla files (with AS1 and AS 2) to html 5

Wir wollen unsere Flash Lernmodule auf mobilen Geräten verfügbar machen und suchen nach einer Wandlungsmöglichkeit von fla Files ( mit AS 1 und AS 2) in html 5 Seiten.
Captivate 8 scheint hier grundsätzlich eine Lösung zu bieten, wenn ich das richtig verstanden habe, aber Bedingung ist wohl AS2.
Korrekt?
Wer hat Erfahrung mit so einer Wandlung von vielen und aufwendig gestalteten Flash-Seiten (500 - 600 Seiten) und kann mir hier Tipps geben?
Beste Grüße
Hans-J. Schmüser

Hello
Jochen,
I’m already
in contact with the German engineer Alexander Diepold who tries to get my
application running. If there are findings that will be interesting to the LV community I would like
to report about it. Thanks for your interest.
Regards
Detlef

Problem with file content conversion in receiver file adapter

Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
Chandra

Posted in Incorrect forum.
Posted again in Process Integration forum

File Conversion in Rec File Adapter with subnodes

Hi
My XML Structure is like this -->
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_Test xmlns:ns0="urn:TESTconversion">
<MstName>Hello</MstName>
- <Header>
<TableName>1tst</TableName>
<PayDate>0102</PayDate>
<TotalAmt>24.00</TotalAmt>
<Total>000002</Total>
<PaySource>CHK</PaySource>
- <Subheader>
<TableName>1tst</TableName>
<SelectCatgry>test</SelectCatgry>
<CustID>200</CustID>
<PayAmount>11.00</PayAmount>
</Subheader>
- <Subheader>
<TableName>1tst</TableName>
<SelectCatgry>test</SelectCatgry>
<CustID>400</CustID>
<PayAmount>13.00</PayAmount>
</Subheader>
</Header>
- <Header>
<TableName>1tst</TableName>
<PayDate>0103</PayDate>
<TotalAmt>10.00</TotalAmt>
<Total>000001</Total>
<PaySource>ONE</PaySource>
- <Subheader>
<TableName>1tst</TableName>
<SelectCatgry>test</SelectCatgry>
<CustID>100</CustID>
<PayAmount>10.00</PayAmount>
</Subheader>
</Header>
</ns0:MT_Test>
which means
MT_Test is root 1..1
Header is the sub-node of MT_test as 1...*
Subheader is sub-node of Header which is also 1...*
rest of the fields are elements as 1..1
Now I need to convert this into Flat file using Receiver File Adapter, I gave this in my content conversion logic
recordset Structure -
MstHeader,BFKKZK,BFKKZP
MstName.addHeaderLine     0
MstName.fieldFixedLengths     8
MstName.endSeparator     'nl'
Header.addHeaderLine     0
Header.fieldFixedLengths     30,10,15,6,6
Header.endSeparator     'nl'
Subheader.addHeaderLine     0
Subheader.fieldFixedLengths     34,10,35,16
Subheader.endSeparator     'nl'
But with this I am getting exception as -->
Could not process due to error: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_Test' found in document', probably configuration error in file adapter (XML parser error)'
I know that http://help.sap.com/saphelp_nwpi711/helpdata/en/44/686e687f2a6d12e10000000a1553f6/content.htm says following -->
The expected XML structure contains the structure as nodes filled with any number of elements without additional subnodes.
But does that mean Structure with sub-nodes cannot be converted in flat format.
Pls. suggest the solution for this.
- lalit -

Shab
I resolved the issue & able to convert the hierarchical XML file into flat file with the desired format I wanted.
Rather then FCC, I use MessageTransformBean module and I have to insert more dummy contexts & dummy fields in the target structure in order to achieve the flat file format.
I am getting file ( not actual file below just template is shown below) like this now
Header1 ....details....
SubHeader1.1
SubHeader1.2
SubHeader1.x
Header2 ....details....
SubHeader2.1
SubHeader2.2
SubHeader2.x
Headerx ....details....
SubHeaderx.1
SubHeaderx.2
SubHeaderx.x
Once the total development is over on my side I will create the blog for this. So this following statement is only correct when you use protocol as FCC but not with module.
"The expected XML structure contains the structure as nodes filled with any number of elements without additional subnodes."
Thanks
Lalit

File content conversion for file with hierarchical structure

Hi
I want to read a flat file in the following message structure using file content conversion.
Message structure is :
01 ( occurence = 1)
_ 1B (occurence = unbounded)
_ 1G (occurence = unbounded)
_1H (occurence = 1)
_1N ( occurence = unbounded)
99 (occurence = 1, trailer record)
In short there will be one 01 ( header record) in file. There will multiple 1B records. Under one 1B record there will multiple 1G records. Under each 1G record there will be one 1H recoprd and multiple 1N record. At the end there will one 99 record.
File format : Fixed length
Data in the text file would be as follows :
01Test
1BF0001MS005 4855390859
1GF000172075F31501 GBPINV 040806
1HF000172075F
1NF000172075F0011MS0051125002FOOUKSTFOOD
1NF000172075F0021MS0056540003ICOMSIEARCA
1BF0111TT005 3454390859
1GF011172075F31501 INRINV 040806
1HF011172075F
1NF011172075F0011MS0051125002FOOUKSTFOOD
1NF011172075F0021MS0056540003ICOMSIEARCA
99002187004855390859
Is it possible to do above using file content conversion or is there any method to do it. Please suggest.
Thanks
Varun

you cant acheive this heirarchy using the file adapters cont. conv, cos it supports only to a single level.
Maybe you can have a module or use the conversion agent !!
Some good reads on the Conv. agent!!!
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/18/conversion-agent-a-free-lunch
/people/alexander.bundschuh/blog/2006/03/14/integrate-sap-conversion-agent-by-itemfield-with-sap-xi
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield

Creating a file with content conversion

Hi all,
I have a scenario in XI which i create a file in it,
I want to create the file with the content conversion option but with no field separator.
I have an error message - "File adapter receiver channel is not initialized. Unable to proceed: null" if i don't use the fieldSeperator option.
I don't want to use this option, I want the file to be created without separators.
Thanks,
Naama

Hi Namma,
Go through very imp blogs:
File Content prameters for the Receiver Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/frameset.htm
File Content prameters for the Sender Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Refer
File Receiver with Content Conversion
File Receiver with Content Conversion
Configuring the Receiver File/FTP Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/95/bb623c6369f454e10000000a114084/frameset.htm
File content conversion sites:
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
File Receiver with Content Conversion
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
File Receiver with Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please see the below links for file content conversion..
The specified item was not found. - FCC
The specified item was not found. - FCC
File Content Conversion for Unequal Number of Columns
File Content Conversion for Unequal Number of Columns - FCC
Content Conversion (Pattern/Random content in input file)
Content Conversion (Pattern/Random content in input file) - FCC
XI Configuration for MDM Integration - Sample Scenario - FCC - MDM
Thanks,
Satya Kumar

How to replace m4a conversion files with original mp3 files in iTunes library to reduce disk space?

Hello
I have a rather large music collection most of which is in mp3 format and also kept in seperate folders to my iTunes music. I had iTunes set up copy media to iTunes folder as m4a so now have two sets of files which are now taking up a large proportion of my hard disk space. Is there an easy way to move my mp3 files into the Itunes folder to replace the copies then delete the copied files.
Many thanks

By m4a are we talking compressed AAC? Those don't take up any more room than the equivalent mp3 and probably give you better quality.
Are you positive those files are m4a? If iTunes is set to copy media when you add it to the library I don't think it converts. It only converts when you import.
Since we're not talking replacing mp3s with mp3s I don't know if there is an way to more or less invisibly replace the files. If you were replacing a file with one of identical file name, you can trick iTunes into accepting it. Since the new files end in mp3 and the old ones in m4a I suspect you will end up having to add the new files and delete the others. This will of course mean you have to rebuild playlists and update tags. Before you delete the old copy you can use Dougscript "Copy Tag Info Tracks To Tracks" to transfer some of the tag information that you might wish to retain such as playcount, ratings, last played, etc.

My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

Hmm . . . comes with a Utility MPEG2 Component ML app with no explanation of what it's for?
The utility app is an "assistant PKG installer." It allows Lion and Mountain Lion users to install the older QT MPEG-2 Playback Component installer PKG file which is not allowed to run on its own under Lion or Mountain Lion since these operating systems already have a QT X only MPEG-2 component embedded in the QT embedded structure. Without this utility you would have to either copy the component from an older system to your Lion or Mountain Lion system, use Pacifist for installation, or manually open the PKG contents and transfer the component to the appropriate component folder.
As to your "discussion" regarding the playback of AVI file types, there are really only two strategies here:
1) You can add component support so that QT can play the files natively or
2) You can convert the file contents to compression formats that are natively compatible with the unmodified QT component configuration.
Each user should decide for his or her own self which approach best suits their needs for a particular source file. In most cases, conforming the system's codec component configuration to play the source file directly results in higher video quality since no transcoding takes place but this strategy will not work if a codec which is required is not available for the user's operating system. On the other hand, converter utilities tend to support more built-in codecs and are easier to use since the user does not have to concern him or herself with the nature of the particular source compression formats but at the risk of some potential loss in visual quality. As to what converter to use, once again this is a matter of personal choice. In the case of commercial converters like iSkysoft, the codecs are built in while MPEG Streamclip accesses the host operating system's QT codec component configuration. I personally prefer the free HandBrake app for AVI, MKV, TS, MTS, and M2TS conversions since it has an exceptionally full-featured X.264 GUI with some user options that 97% of users are likely to never use.

Content conversion in sender file adapter problem

Hello,
I receive a flat file with the following structure:
HEADER;...fields;
ITEM;...fields;
ITEM;...fields...;
HEADER;...fields;
ITEM;...fields...;
...etc.
and I am converting it to xml with the same structure. The Problem by the conversion is that the result looks something like this:
HEADER;...fields;
ITEM;...fields;
ITEM;...fields;
ITEM;...fields;
HEADER;...fields
HEADER;...fields.
So, all the ITEM recordsets are ordered to one HEADER structure and the other HEADER structures have no ITEMs.
Do you have a suggestion how I can get this right?
Thanks!!
Best Regards,
Mircea

Hi,
Can you provide with the details of FCC parameters you have used ??
The problem might be there in the occurance..
Regards,
Chandra

Can't open a file with spaces on the filename.

Lets say I have a file:
/home/orv/Open - Me - Please.txt
When I double click to open that file with any program, the result is something like this:
"Unable to find /home/orv/Open%20-%20Me%20-%20Please.txt"
I'm not sure what to call that process of converting the file name so I've been unable to google it up to find a fix or a way to change the behavior of the file manager.
I've checked the settings in Nautilus and nothings there. Any clues? Thank you!
Last edited by orv (2007-12-14 23:11:59)

I tried removing everything in my home directory to erase all settings, still the same problem.
I tried using a different file manager and still the same problem.
Here's another example of my problem and its quirks:
Lets say I have a file called:
/home/orv/I am a Movie.avi
In nautilus or thunar, double-clicking that file so I can play it with Mplayer will give an error:
Failed to open file:///home/orv/I%20am%20a%20Movie.avi
However, when I drag and drop using the file manager into Mplayer, it works.
So my problem is this automatic conversion of whitespaces into the %20 which I don't know how to turn off.

How to load several transformation files with a single action

Hi everybody,
We are loading data from BI cube into BPC cube. We are working on SAP BPC 7.0 version and we have designed several transformation files in order to load each key figure we need.
Now, we want to load all the transformation files executing only one action. Which one is the best way to do it?
We thought that it would be possible to build a single process chain, where we would call the target cube and all the transformation files. In this way, the administrator only has to execute once a package that would execute the process chain. We don't want the administrator to execute several times a package looking for the different transformation files.
How can we do it? Is there any example or document related to it?
Any idea out there?
Kind regards
Albert Mas

HI SCOTT,
I AM FACING A PROBLEM WHEN I RUN 2 ROUNDS IN ONE TRANSFORMATION FILE...
I need to distribute a source field in to BPC through making 2 conversion files... following is the data
Transformation file
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
CONVERTAMOUNTWDIM=ZOUTPUT
*MAPPING
CATEGORY=*NEWCOL(ACT)
PAO=0COSTCENTER
TIME=0FISCYEAR
ZOUTPUT=0FUNDS_CTR
SIGNEDDATA=0DEB_CRE_LC
*CONVERSION
PAO=PAO_CONVER.XLS
ZOUTPUT=ZOUTPUT_CONVER.xls
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
CONVERTAMOUNTWDIM=ZOUTPUT
*MAPPING
CATEGORY=*NEWCOL(ACT)
PAO=0COSTCENTER
TIME=0FISCYEAR
ZOUTPUT=0FUNDS_CTR
SIGNEDDATA=0DEB_CRE_LC
*CONVERSION
PAO=PAO_CONVER.XLS
ZOUTPUT=AMOUNT_CONVER.XLS
Conversion file 1 (PAO=PAO_CONVER.XLS)
EXTERNAL
INTERNAL
ID0001
F08001
ID0002
F08001
ID0003
F08001
DG0001
F08001
DG0002
F08001
Conversion file 2 (ZOUTPUT=ZOUTPUT_CONVER.xls)
ID0001
FX01
VALUE*1
ID0002
FX01
VALUE*1
ID0003
FX01
VALUE*.40
DG0001
FX02
VALUE*1
DG0002
FX02
VALUE*1
Conversion file 3 (ZOUTPUT=AMOUNT_CONVER.XLS)
EXTERNAL
INTERNAL
FORMULA
ID0003
FX02
VALUE*.60
I am getting the following error
[Start validating transformation file]
Validating transformation file format
Start validation transformation 1/2
Validating options...
Validation of options was successful.
Validating mappings...
Validation of mappings was successful.
Validating conversions...
Validation of the conversion was successful
Start validation transformation 2/2
Validating options...
Validation of options was successful.
Validating mappings...
Validation of mappings was successful.
Validating conversions...
Validation of the conversion was successful
Creating the transformation xml file. Please wait...
Transformation xml file has been saved successfully.
Begin validate transformation file with data file...
[Start test transformation file]
Validate has successfully completed
ValidateRecords = YES
Reject count: 0
Record count: 6
Skip count: 0
Accept count: 6
0COSTCENTER is not a valid command or column 0COSTCENTER does not exist in source
Validation with data file failed

I write digital port by 'DAQmx Configure Logging.vi' and receive TDMS file with 8 boolean channels. How can I write to 1 integer channel?

Hello!
I want to write 1 digital port from PXI-6536 with streaming to TDMS file.
I'm writing by 'DAQmx Configure Logging.vi' and become TDMS file with 8 boolean channels.
How can I write to 1integer channel?
Attachments:
1.JPG ‏27 KB

Hey Atrina,
The actual data stored on disk is just the raw data (that is, a byte per sample in your case). It's really just a matter of how that data is being represented in LabVIEW whenever you read back the TDMS file.
I'm not sure if there is a better way to do this, but here is a way to accomplish what you're wanting:
Read back the TDMS file as a digital waveform. Then there's a conversion function in LabVIEW called DWDT Digital to Binary. This function will convert that set of digital channels into the "port format" that you're wanting. I've attached an example of what I mean.
Note: When looking at this VI, there are a few things that the downgrade process did to the VI that I would not recommend for these TDMS files. It added a 1.0 constant on the TDMS Open function, and it set "disable buffering" on the TDMS Open function to false; you can get rid of both of those constants.
Message Edited by AndrewMc on 01-27-2010 11:21 AM
Thanks,
Andy McRorie
NI R&D
Attachments:
digitalconvert.vi ‏13 KB

File Content Conversion Parameters in FIle Adapter

Hi
I am doing a scenario - XML file to Text file using File content conversion parameters in Receiver File Adapter Channel.
I given FCC Parameters like:
DATA.addHeaderLine - '0'
DATA.fieldSeparator - ,
DATA.endSeparator - 'nl'
But im getting error in Receiver File Adapter as - fieldSeparator not specified.
i would be greatful if any one help me.
Regards
Rajesh

Hi Rajesh,
There are lot of blogs which explain File Content Conversion in different scenarios:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
I hope this helps.
Regards.
Praveen

Robohelp HTML 8 - Generating files with apostrophe in file name

Before I start, I have read this thread
http://forums.adobe.com/message/1062904#1062904 and several others, yet I still have questions.
Previously I used Robohelp 5x, which worked perfectly. Our user manuals are in MS Word and each have several topics that have apostrophes in the topic name (that are necessary in the topic). Robohelp 5x would import the Word Document without issue and create HTML files that automatically replaced the apostrophe with an underscore. All references (Index, TOC, etc) to those files also automatically changed to underscore.
Fast Forward to Robohelp 8.0.2 (yes, I have the update). Even if I go into the options and make sure "Use Underscores in file names" is selected - it no longer replaces the apostrophe with an underscore (though it does replace the spaces with underscores).
Locally, when I generate the online help (WebHelp) and put it on our local webserver - it works just fine. Even with the apostrophes in the file names and references.
However, when the WebHelp files are hosted at our server hosting facility, any links within the Webhelp to files with an apostrophe result in a 404 error. I have searched and searched to see if there is some kind of server setting to allow these special characters to be recognized in the file name but have not had any luck.
Per the link at the beginning of this post, the issue in that thread was resolved by changing the file name of the HTML files. I attempted to change the file name of the HTML files that RoboHelp created. However as far as I can tell there is no way to do this within RoboHelp 8. If I attempt to do it outside of RoboHelp 8, I need to import all of the "new" HTML files and all references (Table of Contents, Index, etc) now show broken links and need to be re-linked to this new topic. This is not an option. I have 12 user manuals that are updated on a regular basis and the renaming\relinking process would take forever.
Any help would be greatly appreciated.
Thanks,
-Noob

I was able to log into the server hosting facility and look at the html files themeslves.
It appears that at some point (between when I created them locally and now) all of the apostrophes in the file names were changed to "Æ". This blew my mind. And sure enough if I plug in the URL and replace the apostrophe with "Æ" the page shows up just fine.
From what I've been reading it looks like that may be related to the conversion from MS Word and "Smart Quotes". I'm looking into that now, but any help would still be great.
Thanks,
-noob

Conversion of a file with 2 converters in UCM / IBR?

Similar Messages

Maybe you are looking for