Conversion of an AIR-AP1120B from autonomous to LAP

Does anyone know if it's possible to convert the AIR-AP1120B from autonomous to LAP?

Hi Federico,
Sadly, the 1120 with "B" Radio is not supported :(
Support for the 1121 was added in WLC version 4.0.155.0 Have a look at these related docs;
Software release 4.0.155.0 New Features
LWAPP for Cisco Aironet 1100 Series Access Points (802.11g radio only) Allows the Cisco Aironet 1100 Series Access Point to be upgraded from autonomous access point mode to lightweight mode using the autonomous to lightweight mode upgrade tool.
Note You must install software release 4.0.155.0 on the controller before connecting 1100 series access points to the controller.
http://www.cisco.com/en/US/products/ps6366/prod_release_note09186a00806e8989.html#wp147320
LWAPP Upgrade Tool Troubleshoot Tips
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072d9a1.shtml
Access points must run Cisco IOS Release 12.3(7)JA or later before you use the upgrade tool.
System Requirements
You can use the Autonomous to Lightweight Mode upgrade tool to install Cisco IOS Release 12.3(11)JX on these access points:
**All 1100 series access points containing MP21G (802.11g) radios
All 1130, 1230, and 1240 series access points
All modular 1200 series access points running Cisco IOS software and containing these supported radios:
802.11g: MP21G, MP31G
802.11a: AIR-RM21A-x-K9, AIR-RM22A-x-K9
All 1300 series access points in access point mode
http://www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/b311jx1.html
Cisco has released a free tool called the "Autonomous to Lightweight Mode Upgrade Tool" that allows selected Cisco Aironet autonomous access point models to be configured for lightweight mode operation.
The Autonomous to Lightweight Mode Upgrade Tool supports the following models:
Cisco Aironet 1240AG Series access points
Cisco Aironet 1230AG Series access points
Cisco Aironet 1200 Series access points that contain 802.11g (AIR-MP21G-x-K9) and/or second-generation 802.11a radios (AIR-RM21A-x-K9 or AIR-RM22A-x-K9)
Cisco Aironet 1130AG Series access points
**Cisco Aironet 1100 Series Access Points that contain 802.11g radios (AIR-AP1121G-x-K9)
Cisco Aironet 1300 Series Access Points/Bridges (AIR-BR1310G-x-K9 or AIR-BR1310G-x-K9-R). A Cisco Aironet 1300 Series operating in Lightweight Access Point Protocol (LWAPP) mode only operates as an access point. This series does not support LWAPP bridging mode.
The Autonomous to Lightweight Mode Upgrade Tool supports a process to migrate an autonomous access point from autonomous mode to lightweight mode. Unlike a VxWorks to Cisco IOS Software upgrade, this process is a Cisco IOS Software upgrade to the existing Cisco IOS Software image-not an operating system "swapout". In converted access points operating in lightweight mode, Cisco IOS Software continues to run on the access point, while LWAPP is used to communicate with a wireless LAN controller. Since LWAPP supports automatic access point configuration, there is no need to retain or convert the original autonomous Cisco IOS Software access point configuration.
http://www.cisco.com/en/US/netsol/ns340/ns394/ns348/ns337/networking_solutions_white_paper0900aecd804f1a23.shtml
Cisco Aironet Access Point Support for Lightweight Access Point Protocol
http://www.cisco.com/en/US/products/ps6521/prod_bulletin0900aecd80321a2c.html
Hope this helps!
Rob

Similar Messages

AIR-SAP1602I After convert to LAP, No radio interface

Hello,
Our AIR-SAP1602I is running ap1g2-k9w7-tar.152-4.JB6.tar and working normally.
Now, we covert AIR-SAP1602I from autonomous to lightweight which is running ap1g2-rcvk9w8-tar.152-4.JB6.tar to join C3850. (It will be joined then not-joined repeatedly)
After converting, we compare AIR-SAP1602I to another AIR-CAP1602I (It's working perfect with C3850 at this present) and find something strange via "show version" and "show capwap client rcb"
Can someone tell us how to solve this problems, thanks !!!
AIR-CAP1602I
Last reset from power-on
LWAPP image version 10.1.140.0
1 Gigabit Ethernet interface
2 802.11 Radios
AdminState : ADMIN_ENABLED
SwVer : 10.1.140.0
NumFilledSlots : 2
AIR-SAP1602I
Last reset from power-on
LWAPP image version 7.6.100.0
1 Gigabit Ethernet interface
------> No show：2 802.11 Radios
AdminState : ADMIN_ENABLED
SwVer : 7.6.100.0
NumFilledSlots : 0

Can you test this with using full lightweight image (ap1g2-k9w8-tar.152-4.JB6.tar) or different recovery image (ap1g2-rcvk9w8-tar.152-4.JB5.tar). to see the problem is persistent.
HTH
Rasika
**** Pls rate all useful responses ***

Converting air-sap2602i-s-k9 from autonomous to LWAPP

Hi guys,
    I need your expertise regarding how to convert from autonomous to LWAPP using AIR-SAP2602i-s-k9 with IOS version of ap3g2-k9w7-xx.152.-2.JA.
    I'm following these commands but it is not available
    debug capwap console cli or debug lwapp console cli
I cannot proceed to convert it Did I miss something or the 2600 series doesn't support LWAPP convertion ?
thank you
Erik

Hi Erik,
Those commands aren;t going to work, they're debug commands for a lightweight AP.
Here is the guide to upgrading:
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html
It's pretty simple though, get the lightweight software follow the upgrade tool instructions to load new software.
Though, you have a newer AP so you'd be ok just to load the new software on, if it's only for a small amount this is fine.
Thanks
Chris

Upgrading 1252s from autonomous to LWAPP

I need to upgrade several 1252s from autonomous to LWAPP.
I have not been able to find the upgrade tool for 1250s or instructions for CLI upgrade.
I wil be using NCS to do final configuration once the APs come online.
Can someone assist?
Thanks,
Kristin

So long as you pull the rcv file for the AP you should be able ti use NCS to do the conversion.
Other than that a standard AP upgrade should work, with the rcv file as well.
Steve
Sent from Cisco Technical Support iPhone App

AP1231 from autonomous to lightweight

Hi Community.
Is it possible to upgarde the AP1231 from autonomous to lightweight.
Kind regards patrick

Here are links to the conversion
Using a TFTP Server to Return to a Previous Release
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
https://supportforums.cisco.com/docs/DOC-18268
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
http://www.youtube.com/watch?v=QQ_NuxdRhQ4
https://supportforums.cisco.com/docs/DOC-14960
Sent from Cisco Technical Support iPhone App

I need to remove "air." from package name. I'm get a Layout xml error when repackaging android app..

So, i'm doing this on my own app. I made an update for an older app that was build using Native Android. But this time, i used Adobe AIR... The catch is Adobe likes to append a "air." to the front of your package name without asking you. So basically I can't upload my update because it has a new package name is now "air.com.mycompany.myapp" rather than the original "com.mycompany.myapp"
Basically I'm going through this guide..
http://helpx.adobe.com/air/kb/opt-out-air-application-analytics.html
I followed all the steps, made all the adjustments to the androidmanifest.xml like it asks.
But after going along with the above guide, with no issues when i get to the step that says
"Run the following command to create the resource file for the updated AndroidManifest.xml:"
I run this..
    "/Users/brybam/Documents/eclipse/android-sdk-mac_x86/platform-tools/aapt" package -f -M AndroidManifest.xml -F resources.arsc -I "/Users/brybam/Documents/eclipse/android-sdk-mac_x86/platforms/android-8/android.jar" -S ./res
But I keep getting the same error regarding the xml files in res/layout
    ./res/layout/expandable_chooser_row.xml:1: error: Error parsing XML: not well-formed (invalid token)
    ./res/layout/expandable_multiple_chooser_row.xml:1: error: Error parsing XML: not well-formed (invalid token)
    ./res/layout/main.xml:1: error: Error parsing XML: not well-formed (invalid token)
    ./res/layout/multiple_file_selection_panel.xml:1: error: Error parsing XML: not well-formed (invalid token)
    ./res/layout/ssl_certificate_warning.xml:1: error: Error parsing XML: not well-formed (invalid token)
The guide doesn't say anything about these xml files, and im not sure what to do with these or how to handle them.
If i go into the res/layout folder, and just delete these (i know they're necessary. But i just deleted them as a test, to get through the rest of the guide...)
I was able to get through the rest of the steps in the guide fine, make an apk, and put it on my phone...only to find out the app will crash the moment you try to run it. Probably because i deleted the layout xml files...But i cant get the command i need to run above to accept them!
So, earlier in the guide they have me use thing thing called the "AXMLPrinter2.jar" to make the AndroidManifest.xml readable so i can edit it.
I run something like this:
    java -jar "/Users/brybam/Desktop/repackage/AXMLPrinter2.jar" AndroidManifest.xml > AndroidManifest.xml.bk
This makes a new file "AndroidManifest.xml.bk" and i can edit that.
So, I was thinking with all of these layout xml files, maybe I could run this "AXMLPrinter2.jar" on them and then edit them. Because right now if you open them they're not human readable, and its hard for me to work on them if they're not...
I tried this thinking i could do the same thing...
    java -jar "/Users/brybam/Desktop/repackage/AXMLPrinter2.jar" main.xml > main.xml.bk
Just get a blank file and a console erorr when trying to use the AXMLPrinter2.jar on the layout xml files...
    java.lang.ArrayIndexOutOfBoundsException: 67
              at android.content.res.StringBlock.getShort(StringBlock.java:231)
              at android.content.res.StringBlock.getString(StringBlock.java:91)
              at android.content.res.AXmlResourceParser.getName(AXmlResourceParser.java:140)
              at test.AXMLPrinter.main(AXMLPrinter.java:56)
So, I think my whole issue is based around these XML files not being converted to human readable before i try and re-package....
EDIT:::
Ok, so I found a site that talks about the error I'm getting but it's in chinese, and even after translating the page...I'm still not well versed with terminal and this stuff to get it.
It reads:
"Error.
Final conclusion:
In minSdkVersion <= 7, AXMLPrinter2.jar can normally decompile xml file
Greater than 7 can not be normal decompile xml file (AndroidManifest.xml except)
Give way to share a batch decompile xml file:
First, create a *. Txt file
Stresses inside the content authoring
for / r layout%% a in (*. xml) do @ java-jar AXMLPrinter2.jar "%% a" >> "%% a". txt
Then this txt file extension into bat form, and this BAT the file and AXMLPrinter2.jar on the same directory will be decompiled xml into the layout directory
Decompilation results can be generated by executing the bat file multiple xml files."
- http://hi.baidu.com/ghcghc/item/ecbaa1ce997cb225a0b50ac2
Maybe someone with more know-how could explain what they're explaining? I get that he's saying the issue im seeing appears when you're using minSdK <=7 but I need to use minSdk 8. Does anyone understand this work around? And how I might go about it on a Mac with terminal?
I wish adobe would make it easy to remove the "air." from the package name. If they want to convert old Native devs to AIR devs...the transition needs to be seamless. But now I'm about to have to go back to Native because I can't update an app I already have out on the market with an air app.

Hello~
     I also tried to remove "air." package name in air application. And i encounter the same problem.
     I do not find any solution to decode the xml inside res folder by AXMLPrinter2.jar. And those xml inside is compressed which is unreadable.
     However, what you can do is copying the structure of res folder. And go to your air sdk file path - adobeair-sdk-folder/lib/android/lib/resources/
     Replace those file exists in your res folder. And copy "values" folder to your res folder.
     Hope this solve your problem~

HT201335 What causes the TV screen to freeze but sound continue on TV when using Air Play from I Phone?

What causes TV screen to freeze but sound continue on TV when using Air Play from I Phone 4?

First try rebooting ATV and router. Beyond that, it's probably something within the network, typically interference.
To get a report of the network go to istumbler (Mac) or netstumbler (PC). Look for signal strength and noise.
If on wifi try ethernet.

How to Call a AIR application from Flex Application

Hi,
    I have Used AIR (Desktop application) in Flex Builder to Upload a File from a local path and save it it a server path.
I need to Call this AIR(Desktop application) from my Flex Application.... i.e
I am using a link button to send a event using Script and Forward that Desktop application from Flex Screen
But it doesnot load that (Desktop application) in Screen. Only Balnk screen is loaded from path
Here is the code
AIR(Desktop application)
<?xml version="1.0" encoding="utf-8"?><mx:WindowedApplication
xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" creationComplete="openBrowseWindow();">
<mx:HTTPService id="urlpath" showBusyCursor="true" useProxy="false" method="
POST" url="http://localhost:8080/nat/FlexAction.do?method=UrlPath"result="pathresult(event)"
fault="faultHandler(event)"
>
</mx:HTTPService>
<mx:Script>
<![CDATA[
import mx.events.FileEvent;
import mx.rpc.events.ResultEvent;
import mx.rpc.events.FaultEvent;
import mx.utils.ObjectUtil;
import mx.controls.Alert;
private
var openFile:File = new File()
private
function openBrowseWindow():void{openFile.addEventListener(Event.SELECT, onOpenFileComplete);
openFile.addEventListener(Event.OPEN, load);
openFile.browse();
private
function load():void{Alert.show(
"load");
var imageTypes:FileFilter = new FileFilter("Images (*.jpg, *.jpeg, *.gif, *.png)", "*.jpg; *.jpeg; *.gif; *.png");
//var textTypes:FileFilter = new FileFilter("Text Files (*.txt, *.rtf)", "*.txt; *.rtf");
var allTypes:Array = new Array(imageTypes);openFile.browse(allTypes);
private
function faultHandler(event:FaultEvent):void {
//Alert.show("Fault")Alert.show(ObjectUtil.toString(event.fault));
private
function pathresult(event:ResultEvent):void{Alert.show(
"res")
//Alert.show(ObjectUtil.toString(event.result));}private
function onOpenFileComplete(event:Event):void{
//mx.controls.Alert.show("event: "+event.target.nativePath +"UR!!!");
var pPath = event.target.nativePath;
var parameters:Object = {FlexActionType:"PATH",path:pPath};
// Alert.show("Image Selected from Path : "+pPath); urlpath.send(parameters);
//Alert.show("Passed.."+parameters);}
]]>
</mx:Script>
<mx:Button click="openBrowseWindow();onOpenFileComplete(event)" name="Upload" label="Upload" x="120.5" y="10"/>
Here is Mxml Code for Flex Application
<?xml version="1.0" encoding="utf-8"?><mx:Application
xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" xmlns="http://ns.adobe.com/air/application/1.0.M4" >
<mx:Script>
<![CDATA[
import mx.controls.Alert;
private function Upload():void{
// CursorManager.setBusyCursor();
//var url:String = "HomeAction.do?method=onLoad";
//var url:String = "assets/Air.swf";
var url1:URLRequest = new URLRequest("assets/Air.swf");navigateToURL(url1,
"_self");
// CursorManager.removeBusyCursor(); }
]]>
</mx:Script>
<mx:LinkButton id="up" click="Upload()" x="295" y="215" label="UpLoad"/>
In this code i forward using s url to Open tat Desktop application but a blank screen appears with out the proper output...
Please Help me in this to forward AIR from Flex Screen..
Thanks in Advance
With Regards
Gopinath.A
Software Developer
First Internet Systems Pvt. Ltd.,
Chennai

try this
http://www.leonardofranca.com/index.php/2009/09/17/launching-an-installed-air-application- from-the-browser/
regards
Leonardo França
Adobe Certified Expert Flex 3 with AIR
Adobe Certified Expert Rich Internet Application Specialist v1.0
Adobe Certified Expert Flash CS3 Professional
Certified Professional Adobe Flex 2 Developer
Adobe Certified Professional Flash MX 2004 Developer
http://www.leonardofranca.com
http://twitter/leofederal
Manager AUGDF - Adobe User Group do Distrito Federal
http://www.augdf.com.br
http://twitter/augdf

HT4356 all of a sudden I cannot air print from my ipad or iphone - I can still print from my laptop - don't know how to fix

All of a sudden i can no longer air print from my iphone 4S or my ipad 2
Need help
I can still air print from my Dell laptop

Hello rcappel,
Thank you for the details of the issue you are experiencing when printing from your iPhone and iPad. I found a couple of resources I recommend for the issue you described.
First, I recommend following these steps:
If you are unable to print, or if you see the message "No AirPrint Printers Found"
Verify that the printer:
Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
Is connected to the same Wi-Fi network as the iOS device.
Has the latest firmware version installed.
Has paper with enough ink or toner installed.
Is free of any errors displayed on the printer's control panel.
If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.
You can find the full article here:
AirPrint Basics
http://support.apple.com/kb/HT4356
If you are still having trouble printing after following those steps, I recommend these steps:
Wi-Fi disconnects, or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thank you for using Apple Support Communities.
Best,
Sheila M.

I purchased a second express to use a extender. not sure how to set it up to for airplay to run off of the original air play from 1st express,

need help setting up second express as a range extender for my air play from 1st station which is up stairs and plugged into my home theater?????

I'm a great believer in the KISS principle.
Configuration is simple if you start from a factory default condition. Then connect the Airport to AC power and finally to the Internet modem (or modem/router). Open Airport Utility on your Mac or other computer and accept all of the recommendations EXCEPT as noted on the first graphic below. After confirming that it works, insert your desired administrative and WiFi passwords. AirPlay is a separate selection. Refer to second graphic below.
Do not expect the Airport to respond instantly to the configuration commands. BE PATIENT!

HT201343 Can I use Air Play mirroring if my Macbook Air is from Late 2010 (I have Apple Tv).

Can I use Air Play mirroring if my Macbook Air is from Late 2010 (I have Apple Tv).

No.
You can only use Airplay.

HT204291 I'm getting no video only audio from air playing from redbox instant. Any tips ???

I'm air playing from redbox instant but only audio comes up on TV no video. What can I do to fix it?

I'm having similar issues, if I try and play video via the iPad 2 Videos app I only get sound on the ATV2, video is played on the iPad 2. Maybe I'm missing something because I can get the same videos playing on the apple tv via the atv2 menus and if I use the apple remote app no problems as well. Maybe I'm missing something here?
Video/Audio works using safari YouTube and iPad YouTube also apple remote app. As far as I can make out it seems an issues using the iPod App which links into the iPad Videos App, same issue if I use the iPad Videos App.
BTW if I try and play shared video using the iPod app on my iPhone same problem. I'm wondering if there is an issue with iOS 4.3.2 update. Apple TV did not get the update ?

I just got the iPhone 5S. I am able to RECEIVE air drops from people, but I can't send anything via Air Drop. I doesn't seem to be communicating with others. I have Air Drop to communicate with my contacts, but it isn't working. :( Help!

I just got the iPhone 5S. I am able to RECEIVE air drops from people, but I can't send anything via Air Drop. I doesn't seem to be communicating with others. I have Air Drop to communicate with my contacts, but it isn't working. Help!

iOS: Use AirDrop to wirelessly share content

Upgraded outdoor 1310G bridge from Autonomous to LWAPP

I recently got a pair of outdoor 1310G bridge radios to create a bridge. I upgraded one of the APs from Autonomous to LWAPP so that it could connect to our 4402 controller so that it could be monitored and controlled by it.
Everything looks like it upgraded fine with the upgrade tool never got any errors however the file: Config_18June2009_95613.csv that is suppose to have a hash key so that I can load that into the WCS or directly into the WLC is blank nothing is in that document. So at the moment the AP is not joining up with the WLC. Anybody have any advice?
Thanks,
Ryan

Hi Ryan,
You can run 'debug pm pki enable' when the AP is trying to join to find out the hash key.
-Matt

Conversion of an Instrument Driver from LabWindows/CVI to LabVIEW

Hello All,
Conversion of an Instrument Driver from LabWindows/CVI to LabVIEW
http://zone.ni.com/devzone/conceptd.nsf/webmain/9A93316BEBEDB17786256FA300675A0A
But I can not find any hyperlinkt to download
"LabVIEW Interface Generator for LabWindows/CVI Instrument Drivers"
Is there any evaluation version for downloading?
Thanks,
nonomiya

So strange,
I go through three pages but does not find any entry for download,
hmm...,
1. After press the hyperlink,
See Also:
LabVIEW Interface Generator for LabWindows/CVI Instrument Drivers
2. and for a resuest info. form.
3. press download..
====
LabVIEW Interface Generator for LabWindows/CVI Instrument Drivers
System Requirements
NI LabVIEW 7.1 or later
Windows 2000/NT/XP
Use the LabVIEW Interface Generator for LabWindows/CVI Instrument Drivers to create LabVIEW VIs for VXIplug&play and IVI-C instrument drivers from function panel (.fp) files.
Instrument Driver Network
Before using the conversion utility to create a new instrument driver wrapper, please visit ni.com/idnet to see if a LabVIEW Plug and Play instrument driver is available for your device. The Instrument Driver Network (IDNET) provides support for more than 3,000 different instrument models from over 170 different instrument vendors.
Recommendations
This utility was created for developers of C-based instrument drivers who wish to provide a LabVIEW interface, but do not develop a LabVIEW Plug and Play driver. By developing the C and LabVIEW interfaces together, it keeps the components synchronized, and eliminates the need for customers to create their own LabVIEW interfaces. Vendors should distribute the LabVIEW wrapper files with the associated VXIplug&play or IVI instrument driver, so that end users do not have to visit multiple web sites to download the complete driver.
If you are not an instrument vendor, we recommend that you use this utility only if you have instrument driver expertise. Access to the instrument driver source code is preferred, in case you need to edit the C instrument driver in LabWindows/CVI.
After generation, the wrapper VIs should be tested with the instrument.
Instructions
Once you install the software, simply access the utility from the Tools>>Instrumentation>>Import CVI Instrument Driver...menu in LabVIEW. This software replaces the built-in tool and provides feature enhancements.
For additional information on this utility, view the resources below.
Readme for the LabVIEW Interface Generator for LabWindows/CVI Instrument Drivers
Submit your Driver
Visit the Instrument Driver Network
nonomiya

Conversion of an AIR-AP1120B from autonomous to LAP

Similar Messages

Maybe you are looking for