Conversion of large unit of measures
Dear Experts,
To implement a critical business scenario i need to implement following conversion -
245 X = 1000000 Y, but due to limitation of numerical digits to 5 i am notable to do this, if anybody can suggest for the same please.
I shall be greatfull to all
thanks in advance. point will be rewarded please.
Regards,
Pawan Khurana
Further digging leads me to believe that the issue is that iOS 7 uses more RAM, and on the iPad 2, this doens't leave quite enough memory to open these 36MP RAW images.
If I close all background apps, I have been able to get Filterstorm Neue to open and edit these RAW images, while having any app still running in the background will cause a crash. No such luck with Snapseed as I'm guessing it uses a bit more memory than Filterstorm. This would account for why PhotoRaw can open and edit these files - it uses a virtual memory approach to load large files.
So unless iOS 7 becomes better optimised for RAM usage, or these apps are updated to use virtual memory, looks like I'm limited in which apps can open 36MP RAW images on an iPad 2. Wonder if a newer retina iPad would manage? They have more RAM I believe, but probably need more to run the display...
Similar Messages
-
Conversion Problem in Unit of measure 1PAC=100,000 EA
Hi Experts,
I am facing the problem in conversion of Unit of Measures.
If some material has the conversion unit when we order to Vendor.
The Unit of measure is EA, the Order unit is PAC.
The conversion is 1PAC=100,000 EA
But the System is allowing as 1PAC=10,000 EA only and it is not allowing to enter 100,000 EA and throughing the error
Entry too long (enter in the format __,___)
Message no. 00089
How can we increase the characters of the Unit of measure. Like this we have some 50 Materials, I need to increase the length of the conversion spaces. How to do it, Please guide me.
rgds
SwamyHi
you can check this out the denominator factor is Stored in structure - SMEINH - field UMREN.
Best option is to maintain decimal place for the UOM , which is more easier to mainatin.
Even if you go through the note the same is explained. Please read below for Too large numerators and denominators
When 120000 CM3 = 0,2 tons (TO), you can no longer save numerator and denominator of conversion ratio 600000 CM3 = 1 TO as numerator and denominator may have maximally five digits.
Here, you must either select a larger volume unit or a smaller unit of weight: With DM3 the conversion ratio would be 600 DM3 = 1 TO, with KG the conversion ratio would be 600 CM3 = 1 KG.
Generally, the alternative units of measure and the base unit of measure should result in quantities that are in the same dimension since the conversion factors may not be larger than 99999/1 and not smaller than 1/99999.
Thanks & Regards
KK
Edited by: Kishore Kumar Chiluka on Apr 22, 2008 8:25 AM -
Conversion fator for Unit of Measure in BI 7.0
Hi Experts,
Cud you pls tell me how Unit of measure conversion works in BI 7.0. I am getting dialog box of UOM conversion in the properties of BEX but not able to convert Conversion for Unit of measure?
Thanks in advance!
SapnaHi,
Better define Units of measure in that KF.
Hope it helps.
Regards,
Tulasi -
Conversion of alternate unit of measurement
Hi,
System will not allow to enter conversions of unit of measurements in decimal points. But is there any configuration or method, we can force system to accept conversions of unit of measurements in decimal points only? (For example 2.5kg = 1pc, base unit of measurement is 'PC' and alternate unit of measurement is 'KG')
Regards,
SattujHi,
For the given example of Alternate conversion you can use the following setting :
2.5 Kg = 1 Pc
Put the Values as :
25 Kg = 10 Pc
With this the objective of Decimal is achieved.
Please check the following posts for more info :
[Re: variable order unit]
[Re: Base Unit of Measure]
[Re: Issue in unit of measure]
Hope it helps,
Best regards
Amit Bakshi -
Function module for conversion in basic unit of measure....
Hi,
Can someone give me a function module, which will convert the Unit of measure into basic unit of measure
Say a a material has 3 CA (Cases) in a PO and the conversion factor(UMREZ in table MARAM) for CA for that material is 4 and converison for MP (Master pack) is 12,then
3CA = 9 PC = (9/12) MP
But I want a function module which will do this conversions ?Hi,
Use MD_CONVERT_MATERIAL_UNIT
Thanks,
Naren -
Conversion in Alternate Unit of Measure
Hi All,
I have a report in which i report data in both base and alternate units of measure, the report has three filelds Material , Quantity (BUOM) and Quantity (AUOM). The problem is for a certain material; say Mat_1, the unit in which it is entered can be Carton or EA, i am using Carton to litre conversion, but my query fails when the material has EA as its unit. Is there a way by which i can convert the unit to litres be it in Cartons or EA???
Kindly suggest a solution anyone pls pls help
Thanx in advance
Regards,Hi,
You can define your own Unit Translation using Tcode RSUOM in such a way that it takes a dynamic unit from each source record with fixed target unit as Litres.
Refer http://help.sap.com/erp2005_ehp_04/helpdata/EN/1b/325d4217139041e10000000a1550b0/content.htm for Unit Translation creation.
You would need to ensure that unit translations are available in T006 table.
--Priya -
How to model a conversion table for unit of measures?
Hi
I am looking for some input on how to model a many-to-many relationship.
The situation:
A fact table with columns:
Product
Unit of Measure
Date
Value
1 product is stored with 1 and only 1 unit of measure - e.g. Product = Oil, unit of measure = m3
The fact contains several products, each having its own unit of measure.
A dimension 'Unit of measures' with columns
Unit Of Measure
Unit Of Measure Name
Measure System
While reporting on the facts it should be possible to chose the unit of measure I want to see my facts in. E.g. I want to be able to show Oil-production in m3 or barrels or liters, etc.
My challenge:
How to model this requirement?
Right now I tend to go for a bridge table between the fact and the dimension.
But I was wondering:
a) are there other ways to model it
b) are there pitfalls in using Bridge tables?
c) Can I re-use the bridge table in combination with other facts as the model grows?
c.2) do I need to create an alias on the bridge table to re-use it?
Thanks for your help
regards
AndyHi Kart,
ok let's say my model looks like this (columns below the tables names, sample in brackets) - again ignoring a date dimension:
Dim_Product --- 1:n --- Fact ----- n:1 ----- Dim_UOM
Id (1,2) Prod_id Id (1,2,3)
Name (Oil, Gas) UOM_id Name (m3, Barrel, Litre)
Value
So the products are coming from the Dim_product, Unit_of measures coming from Dim_UOM.
Fact values would look like this
Prod_id UOM_id Value
1 1 10
1 2 84
1 3 10000
etc
If I need to report in a new measure, I would be forced to add a new record to the fact table
Prod_id UOM_id Value
1 1 10
1 2 84
1 3 10000
1 4 150
with 4 being the new measure id.
What I am looking for is a way to be more flexible when it comes to converting values to different measures.
Thanks
Regards
Andy -
Unit of Measurement in Material Master
Hello Experts...
I have an intresting issue on Unit of Measurement. I would like to maintain alternative unit of measurement as per below..
1 EA = 1 EA
1 ROLL = 5000 EA
1 CT = 150,000 EA
However the field UMREZ length in the material master allows me to enter upto 5 digits...and also it is not possible to enter decimal digits here.
Have any one of you faced this kind of issue, if any one faced what would be the solution for this...?
Look forward to hearing from you..
Cheers
Umakanth..Hi Umakanth,
For increasing the numerator for conversion of base unit of measure, UMREZ would be appending the structure SMEINH by requesting Access Key from SAP.
Even though its not a suggestible decision to append standard SAP structure , if the requirement demands we may need to do that.
Cheers!
Sudhakar Reddy -
Converting Unit of Measure (not quantity)
Hello All,
I have an interesting issue that I am not sure how to address. I have done some searching online and through the forums on how to convert unit of measure. Nearly all of the returned entries pertained to converting FT to LB, and scenarios like that.
My issue deals with the data in the EORD table. I created a custom program to create/update numerous source lists using a BDC for transaction ME01. This way the user can enter numerous materials and plants into one program one time, rather than create each source list individually. One such source list has a value in field MEINS as GAL (Gallon). However this is the converted value, this can be viewed in SE16n. If I use SE16, or debug the program, I can see the value in MEINS as GLL. This is the unconverted value. Thus when I create the source list I get an error.
I was wondering if there was a function module I could use to convert the UoM. I know I could create logic to check the value of UoM and if it is incorrect to change it using a custom FM or even in the logic of the enhancement itself. But this could change over time, meaning more units could be added requiring more logic changes. If there was a standard FM I could use, I could implement it once and be done with it.
So does anyone have any advice or know of an FM I could use? I will continue to search for an answer and if I find one I will post. If my question is confusing please let me know and I will clear up anything I can.
Thanks for your help in advance.
Regards,
C.There is a conversion exit on unit of measure, "CUNIT" (via table T006A) use
CONVERSION_EXIT_CUNIT_INPUT Conversion exit for commercial (3-char) measurement unit INPUT
CONVERSION_EXIT_CUNIT_OUTPUT Conversion exit for commercial (3-char) measurement unit OUTPUT
Regards -
Reporting Data in Alternate Units of Measure
We have a requirement to report data in base unit of measure and also in pounds and kilograms. I have read the paper "How to Report Data in Alternate Units of Measure". My problem is that in our R/3 system the conversion from base unit of measure to pounds is maintained, but no conversion from base unit of measure to kilograms is maintained. In BW, I have 0MAT_UNIT for conversion to pounds but not to kilograms. For the solution to work, am I correct in thinking that the conversion to kilograms must exist in 0MAT_UNIT?
Also, the paper states that it is applicable to BW releases 2.0A to 3.1C. Those of you on BW 3.5 - is there new functionality or a different way of handling reporting in alternate units of measure?
Thanks for your help,
Gail BodnerGail,
Nothing new in 3.5 for UoM conversion. It will still have to be the way described in the How To paper.
Maintin the conversion in R/3. Also, Pounds to KG is a standard coversion - you can hard code it too. Issue in UoM conversion comes in where you cut across type of uints, i.e. from vol. to weight. Then additional information like density is needed but within the same area, it shouldn't be a problem.
Cheers
Aneesh -
Alternate unit of measure in service entry sheet,
Dear All,
I have created service master with unit of measure MON(MONTH), and I have entered alternate unit of mesure 1MON=30 DAYS,
I have created service PO with unit of measure MON, In service entry sheet the unit of measure is MON, I want to change the unit of measure to DAY, BUT in service entry sheet the unit of measure is MON and the filed is desabled, I cannot change the unit on measure to DAY, Please tell me how to change the unit of measure,
With regards,
ARABBASHi,
Change of unit of measure in service entry is restricted as below
Since all data is updated in the base unit of measure, your entry is particularly important for the conversion of alternative units of measure. A quantity in the alternative unit of measure can only be shown precisely if its value can be shown with the decimal places available. To ensure this, please note the following:
The base unit of measure is the unit satisfying the highest necessary requirement for precision.
The conversion of alternative units of measure to the base unit should result in simple decimal fractions (not, for example, 1/3 = 0.333...).
So logically there is a constraint for what you are trying to do
Thanks
Diwakar -
Alternate Unit of Measure (UOM)
Dear all,
I am trying to load alternate unit of measure through 'MM02' transaction. I have to add multiple EAN's. After the load is done i can see only one EAN being populated while the other is not getting loaded. Please let me know why this is happening. I have tried this manually and this is working but not through LSMW direct input.
Thanksin my case also not working for LSMW Direct input so that i have done through LSMW -Recording method with below fileds
SMEINH-UMREN(03) UMREN_03 Denominator for conversion to base units of measure
SMEINH-MEINH(03) MEINH_03 Alternative Unit of Measure for Stockkeeping Unit
SMEINH-UMREZ(03) UMREZ_03 Numerator for Conversion to Base Units of Measure
SMEINH-EAN11(03) EAN11_03 International Article Number (EAN/UPC)
SMEINH-NUMTP(03) NUMTP_03 Category of International Article Number (EAN)
SMEINH-LAENG(03) LAENG_03 Length
SMEINH-BREIT(03) BREIT_03 Width
SMEINH-HOEHE(03) HOEHE_03 Height
SMEINH-MEABM(03) MEABM_03 Unit of Dimension for Length/Width/Height
SMEINH-VOLUM(03) VOLUM_03 Volume
SMEINH-VOLEH(03) VOLEH_03 Volume unit
SMEINH-BRGEW(03) BRGEW_03 Gross Weight
SMEINH-GEWEI(03) GEWEI_03 Weight Unit
SMEINH-AZSUB(03) AZSUB_03 Number of Lower-Level Units of Measure
SMEINH-MESUB(03) MESUB_03 Lower-Level Unit of Measure in a Packing Hierarchy -
Report on material code, description and all unit of measure conversions
report on material code, description and all unit of measure conversions ?
any ideas?Material Number MATNR
with this key and SPRAS (the desired Language key)
from MAKT you can get the descriptions..
and with MATNR from MARM you can get alternative UOM and the conversion rates.
If you need help on MARM how to get the conversions please notify.
Hope it helped
Please reward if found useful
Best Regards -
Unit of measure conversion for CIN is not relevant for pricing
During creation of Ad item type order, when we enter the planned ad size e.g. A CO (Columns) x B IN (Inches), the system is showing a message "Unit of measure conversion for CIN is not relevant for pricing" and pricing is not determined in the Billing Data Set. However if the planned ad size is maintained as A CO (Columns) x B MM (Millimeters), there is no impact to pricing conditions.
Any light how to fix this issue?
Thanks,
Suseela. VDear Suseela,
You need to maintain Unit of conversion using transaction code JH51. You have to follow the path Logistics-Advertising Management-Master Data-Conditions-Order/Billing Document-UM for Pricing.
Here you can maintain combination using Booking Unit, Content Component, Design type and assign Unit of Measure to get relevant pricing into billing set conditions.
Hope it will help. Thanks!
Regards
Indra -
Error in units of measurement conversion "BOM"
hello gurus gudmorning everybody
i have problem in project regarding the units of measurement conversion BOM
this is the scenario: 1000 ft2( BASE UNIT MEASUREMENT) = 1ea ( SALES UNIT) ( 2bed room flat) it is a higher level item
sub items are in EA base unit measurement ex: like one sofa one air conditioner etc instead of taking sale unit measurement of higher level item , its taking base unit mesurement of higher level item , .i.e instead of taking 1EA 2bhk = 1AC, 1 SOFA, but is calculating 1000ft2( 2bhk) = 1000ac, 1000sofa , plz help out to rectify the conversion
thank you in advance
venkatDear Venkat,
Try with this
Please maintain the alternative unit of measure in sub itemes master data at Additional tab like this
in AC master data 1EA = 1AC and 1AC = 1EA 2BHK
in Sofa master data 1EA = 1 Sofa and 1Sofa = 1EA 2BHK
Now you try
I hope this will help you,
Regards,
Murali.
Maybe you are looking for
-
Creating a Shortcut on a Mac Desktop
Hi everyone. I'm sure this has a very simple answer, but me being a newbie to using a Mac computer, I need some help. I've set up a server for my home network with a Static IP of 192.168.2.10 . It was simple to create shortcuts for my computer and m
-
"Error while generating HTML" encounterred while running prefilling cache
Hi, We are using BI7, prefilling cache function by using Broadcaster. The prefilng cache is created OK in BEx broadcaser based on Java web and was scheduled. When we run the process chain to trigger the prefilling cache, we got the following error me
-
Any custom quotation screen savers out there?
I'd like to be able to have a random quotation as my screen saver. I've found quote screensavers out there, but none of them let you use your own collection of quotes. Does anyone know of a screen saver I can use to do this?
-
The scenario is JDBC to IDOC using Graphical Mapping in PI 7.1 I am looking at extracting data from a view in sql server into PI to make sure that data can be extracted into PI. In the ESR the DT , MT , MI and OM has been definied. In the Integratio
-
Hi I often shoot using 'custom white balances' in raw on my canon 5d. Please can someone explain what aperture does with the custom white balance info - is it applied to the raw image when the image is imported? Other Raw processors allow you to spec