Conversion of type h to type g not supported
Hi Experts,
I am getting the Conversion error when using the Adobe forms.
Below is the code that I have used.
CALL FUNCTION lv_fmname
EXPORTING
/1bcdwb/docparams = ls_fp_doc
pernr = lv_pernr
zcit = lt_citation
zsignam = lv_signam
ename = lv_ename
zyears = lv_years
desig = lv_desig
zdate = lv_date
IMPORTING
/1bcdwb/formoutput = ls_formout
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
I am getting the error because of lt_citation. It is of type string_table.
My requirement is displaying the paragraph with the formattings done (newline, spacing, etc).
The paragarph is converted to guid and stored in a table. As of now, I am converting the GUID to tline format and then to string_table and passing that as input to the above function module. It gives the dump.
If I convert it to string and pass to the FM, its working fine. But the formatting is missing. Please suggest.
Go through these threads to get some help:
Formatting in SO10 texts into the form
Trouble with xhtml text in adobe forms
Prevent HTML escaping in RichText fields
regards Otto
Similar Messages
-
Copying from sales document type QTH to HU is not supported
guys i was trying to create a contract based on a quotation created by me here QTH is my quotation type and HU is my contract type the error i encountered was thiss.
Copying from sales document type QTH to HU is not supported .Hi
In VTAA maintain the copy control settings from Quotation to Contract
I think you can copy the AV document type which is quotation for contract.
regards -
Copying from sales document type L2 to RK is not supported
Dear Experts,
Can any guide me please regarding my issue,
My process is linked with service order,after creation of service order,I am going to DP90 Tcode with this it will generate debit memo request,and I will do the billing from vf01.
Now I want to make some invoice correction,
so I have copied the standard RK invoice correction document to ZRK
and i have assign this for my sales area in sales document header,
now I have raised the order from va01,and I have given the invoice document number,
its showing this error u201CCOPYING FROM SALES DOCUMENT TYPE L2 TO ZRK IS NOT SUPPORTEDu201D
for this I think I have to maintain the copy controls,
can any one help me out how to maintain the copy controls for invoice correction.Dear JP,
As you said I have maintained the item category,I have only two item categories,one is L2N,L2W.
I have copied the standard document from VTAF,and I have maintained the copy controls like this,
Copied from RK to F2 as ZRK to ZL2 header data
Data T 052 billing doc header
Data T 103 billing bus header data
Data T 003 billing header partner
Copying requirements as 021 billing header
Tick on copy item number
Then item category maintained as
Item category as L2N
Data T 153 Item from billing document
Data T 104 billing bus item data
Data T 004 billing item partner
Copying requirements as 000
Pricing type u201CEu201D
2nd pricing type u201CDu201D
And the same for L2W,but I have not maintained for u201CG2Nu201Ditem category,but I has copied automatically?
Then I have raised the sales order from va01,its ask the billing document number,I have given the billing doc number and press on copy,its has open the sales order,
Here I have two issues,
1st its generating the two same line items,with G2N item category
EG:if I have given 2 materials line items then its generating the 4 line items with the same material.
2nd I am not able edit any line litem,it all are coming in non editable mode,how to make editable field,and make the changes for price and quantity.
After saving the document again I have to do the billing from vf01?
please suggest me,so this will be added advantage to the user. -
Data types in Sql Server 2012 not supported by replication
Hi All,
I am planning to configure replication on SQL server 2012.I need to know what data types are not supported in replication and if there are any other boundations. kindly suggest.
Regards
RahulWhat type of replication are you looking to implement?
Have you had a look at this thread:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/bbec1a86-14cd-4d90-8b62-c875de4cf9a0/data-type-not-supported-in-sql-server-2008-merge-replication?forum=sqlreplication -
APE 11 This type of file (jpg) is not supported or the required codec is not installed
Greetings folks...
I just started working with APE 11. I am trying to put a jpg image in a title. I get the above error. It is just a jpg and not some fancy format. I read the past posts and they do not address this issue for jpgs..
Thanks for your help.
Cheers! Phil>still getting used to using APE 11
As well as Steve's book, some other online resources
Online User Guide http://help.adobe.com/en_US/premiereelements/using/index.html
-Page to download current PDF http://helpx.adobe.com/premiere-elements.html
Importing Video http://forums.adobe.com/thread/1065281
-and project settings http://forums.adobe.com/thread/1112086
Saving & Sharing http://forums.adobe.com/thread/1137128
-Sharing to DVD or BluRay http://forums.adobe.com/thread/1137645
-Sharing for Movies http://forums.adobe.com/thread/1051093
-Sharing for Computer http://forums.adobe.com/thread/1058237
Steve's Basic Training Tutorials... steps are the same for several versions
-http://forums.adobe.com/thread/537685
FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq
TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_tips
Another help site http://muvipix.com/ or http://muvipix.com/phpBB3/ -
Object type component method name is not supported by object type BOR
Hi All,
Just want to get your help on the above error message in my workflow step.
The method is successfully created in the BO, no errors, status is released/implemented. This error only occurs when the workflow is triggered by a RFC call using SWE_EVENT_CREATE FM. But when using t.code SWUS or SWUE the workflow will run as expected, no error. And when the erroneous workitem is restarted using SWPR, it will run or continue successfully.
Another thing, this is newly created task and method inserted in the workflow. If i delete this task, the workflow will run successfully when triggered by the same RFC.
Hope you guys have already experienced this kind of error.
Thanks in advance.
MattHi Matt,
I am trying to analyse the problem.
When you trigger the workflow using function module it gives error. But when you trigger using SWUE or restart workflow then you do not get error.
In both the cases ( SWUE or restart workflow ) event is getting called using system. But when you trigger it prgramatically it throws error. I hope you are triggering it correctly.
But as you are saying, when you delete the task and method it works fine. So that means it should not be triggering issue.
Just do consistency check for the business object. Check if there is any issue in method. -
PayPal is not supported (US)
on my iPhone 6 running 8.1, under Account Settings, Payment Type it says "PayPal is not supported on this device. To manage or change your payment method, go to the iTunes Store on your computer." I did that and made sure PayPal was selected, signed in to make sure everything was fine, it is.
Go back to my iPhone to set up Family Sharing and it says that I must have a valid payment method and sends me back into this loop. PayPal is fine, I actually bought a .99 cent app to make sure that it was working and it does.
Any ideas?I had this same problem also. The problem has to do with your credit card number associated with you iCloud account. To solve this problem, you need to update your credit card/payment information by doing the following on your iPad / iPhone / iTouch:
Settings > iCloud > click on your account > Payment Information
Update this section with your correct credit card information and Save. -
Hello,
i've setup an application building pdfs and xml files from print files. This application works with some input files, not with all.
The exception that comes up is:
<code>
java.io.IOException: mark/reset not supported
at java.io.InputStream.reset(Unknown Source)
at com.compcomp.hhsued.bl.export.PdfTemplateImpl.parseEscapeString(PdfTemplateImpl.java:160)
at com.compcomp.hhsued.bl.export.PdfTemplateImpl.parseIt(PdfTemplateImpl.java:65)
at com.compcomp.hhsued.bl.export.templates.PdfTemplateSUDU.render(PdfTemplateSUDU.java:130)
at com.compcomp.hhsued.bl.input.ConverterProcessor.writePdfFile(ConverterProcessor.java:323)
at com.compcomp.hhsued.bl.input.ConverterProcessor.init(ConverterProcessor.java:147)
at com.compcomp.hhsued.bl.input.ConverterProcessor.<init>(ConverterProcessor.java:69)
at com.compcomp.hhsued.bl.main.BlConverter.main(BlConverter.java:67)
</code>
What means this: mark/reset not supported?
And why doesn't it happen always?
Thank you,
NicoInput streams represent a input source. The type of the source can vary, for example it could be a socket or it could be a file.
In a random acces file you can 'mark' a position in the file. One can then return to that position by 'reset'.
One of the source types you are using does not support that. -
Conversion from string "20041023 " to type 'Date' is not valid.
Hi ,
I have a table with one of the column(EmpHiredate) datatype is char(10). It has value like "20141023". I need to display this value as date format(dd/mm/yyyy) in report.
Following methods i tried in textbox expression but no luck.
=Format(Fields!EmpHireDate.Value,"dd/MM/yyyy")
=Cdate(Fields!EmpHireDate.Value)
Error:
[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "20041023 " to type 'Date' is not valid.
Is it possible to convert string to date using SSRS textbox expression ? Can anyone help me with the solution.
Thanks,
KittuHi Jmcmullen,
Found one more issue on the same. I have one value like "00000000" for the column(EmpHiredate)
, when i use above expression values(ex:"20141023")
are displaying in dd/MM/yyyy format in report except value like "00000000" and giving following error:
[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "0000/00/00" to type 'Date' is not valid.
Even i tried to pass its original value("00000000") as below but no luck.
=IIF(Fields!EmpHireDate.Value = "00000000","00000000",Format(CDATE(MID(Fields!EmpHireDate.Value,1,4) + "/" + MID(Fields!EmpHireDate.Value,5,2) + "/" + MID(Fields!EmpHireDate.Value,7,2)),"dd/MM/yyyy"))
Also tried this:
=IIF(Fields!EmpHireDate.Value = "00000000","2000/10/21",Format(CDATE(MID(Fields!EmpHireDate.Value,1,4) + "/" + MID(Fields!EmpHireDate.Value,5,2) + "/" + MID(Fields!EmpHireDate.Value,7,2)),"dd/MM/yyyy"))
Please Suggest.
Thanks ,
Kittu -
Conversion of a data object of type "C" to type "l" is not supported
Experts:
i have below code in my FM; defined as remote-enabled module.
when i execute i get the error analysis as:
You attempted to move one data object to another.
This is not possible here because the conversion of a data object
of type "C" to type "l" is not supported.
This at the line move <FS2> TO <wwa_mdm_name_value_pair>-VALUE .
what are the steps to debug this? Thanks!
DATA: tt_mdm_name_value_pair_table TYPE mdm_name_value_pair_table.
FIELD-SYMBOLS : <wwa_mdm_name_value_pair> LIKE LINE OF tt_mdm_name_value_pair_table.
FIELD-SYMBOLS <FS1> TYPE ANY.
FIELD-SYMBOLS <FS2> TYPE any.
data:st_mdm_name_value_pair type mdm_name_value_pair.
assign st_mdm_name_value_pair to <wwa_mdm_name_value_pair>.
assign st_mdm_name_value_pair-code to <FS1>.
assign st_mdm_name_value_pair-value to <FS2>.
clear wa_ZSTRESULT.
loop at T_UPDATE into wa_ZSTRESULT.
assign wa_ZSTRESULT-field to <FS1>.
<wwa_mdm_name_value_pair>-CODE = <FS1>.
assign wa_ZSTRESULT-VALUE to <FS2>.
move <FS2> TO <wwa_mdm_name_value_pair>-VALUE .
append <wwa_mdm_name_value_pair> to tt_mdm_name_value_pair_table.
endloop.resolved using GET REFERENCE.. code looks as below: Thanks!
DATA: tt_mdm_name_value_pair_table TYPE mdm_name_value_pair_table.
FIELD-SYMBOLS : <wwa_mdm_name_value_pair> TYPE LINE OF mdm_name_value_pair_table.
FIELD-SYMBOLS <FS1> TYPE ANY.
FIELD-SYMBOLS <FS2> TYPE DATA.
TYPES t_dref TYPE REF TO DATA.
DATA dref TYPE REF TO DATA.
DATA: TT_UPDATE TYPE ZTYRESULT.
FIELD-SYMBOLS : <WA_UPDATE> LIKE LINE OF TT_UPDATE.
data: st_mdm_name_value_pair type mdm_name_value_pair.
assign st_mdm_name_value_pair to <wwa_mdm_name_value_pair>.
assign st_mdm_name_value_pair-code to <FS1>.
assign st_mdm_name_value_pair-value to <FS2>.
clear wa_ZSTRESULT.
TT_UPDATE = T_UPDATE.
loop at TT_UPDATE assigning <WA_UPDATE>.
assign <WA_UPDATE>-FIELD to <FS1>.
<wwa_mdm_name_value_pair>-CODE = <FS1>.
assign <WA_UPDATE>-VALUE to <FS2>.
GET REFERENCE OF <WA_UPDATE>-VALUE INTO dref.
* MOVE dref TO <wwa_mdm_name_value_pair>-VALUE.
<wwa_mdm_name_value_pair>-VALUE = dref.
append <wwa_mdm_name_value_pair> to tt_mdm_name_value_pair_table.
endloop. -
Implicit Conversion from data type sql_variant to datetime is not allowed.
Getting a odd error. This code was working perfectly before a SQLServer upgrade.
The linked database is working, I'm able to pull up data from it in separate queries just fine.
I'm getting the following error.
Implicit conversion from data type sql_variant to datetime is not allowed. Use the CONVERT function to run this query.
Invalid column name 'TotalDay'. (.Net SqlClient Data Provider)
can anyone spot the issue? I've tried sever variations of the same code, but still get the same thing.
If I put this section in a query by it self it works just fine.
( DATEDIFF(ss,
CONVERT(VARCHAR(10),( SELECT TOP ( 1 )
TimeDate
FROM [nav].AcsLog.dbo.EvnLog AS X3
WHERE UDF2 = E.No_
AND CONVERT(VARCHAR(10), X3.TimeDate, 101) = CONVERT(VARCHAR(10), @sdate, 101)
ORDER BY TimeDate ASC
),101),
CONVERT(VARCHAR(10),( SELECT TOP ( 1 )
TimeDate
FROM [nav].AcsLog.dbo.EvnLog AS X4
WHERE UDF2 = E.No_
AND CONVERT(VARCHAR(10), X4.TimeDate, 101) = CONVERT(VARCHAR(10), @sdate, 101)
ORDER BY TimeDate DESC
),101)) ) AS TotalDayBadge ,>ANDCONVERT(VARCHAR(10),X3.TimeDate,101)=CONVERT(VARCHAR(10),@sdate,101)
It is not a good idea to use string dates for predicates in WHERE clauses.
Use DATETIME or DATE in predicates.
If you are not interested in the time part of DATETIME, use DATE datatype.
Example:
SELECT CONVERT(DATE, getdate());
-- 2014-08-25
Datetime conversions:
http://www.sqlusa.com/bestpractices/datetimeconversion/
Between dates:
http://www.sqlusa.com/bestpractices2008/between-dates/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
Conversion of type "u" to type "v" not supported (cl_abap_tabledescr)
Help! I am struggling with implementing a solution using cl_abap_tabledescr.
At below statement :
<f_interim_data> = <f_ref_data>.
I get the error:
Conversion of type "u" to type "v" not supported.
Coding:
DATA:
l_r_tabledescr TYPE REF TO cl_abap_tabledescr,
l_r_itab type ref to data,
l_r_data_ref type ref to data,
l_r_data type ref to data.
field-symbols:
<gt_itab> TYPE ANY TABLE,
<gt_itab_BCCMP07> TYPE STANDARD TABLE.
field-symbols:
<f_ref_data> type any,
<f_new_data> type any,
<f_interim_data> type any.
go_tdescr ?= cl_abap_tabledescr=>describe_by_data( i_th_ref_data ).
go_sdescr ?= go_tdescr->get_table_line_type( ).
gd_tabnam = 'I_TH_REF_DATA'.
loop at go_sdescr->components INTO gs_component.
" Build fieldname
CONCATENATE gd_tabnam gs_component-name INTO gd_tabfield
SEPARATED BY '-'.
CLEAR: gs_comp.
gs_comp-name = gs_component-name.
gs_comp-type ?= cl_abap_datadescr=>describe_by_data( gd_tabfield ).
APPEND gs_comp TO gt_components.
endloop.
Begin create dynamic standard table copy of I_TH_REF_DATA
" Create instances of dynamic structure and dynamic internal table
go_sdescr_new = cl_abap_structdescr=>create( P_COMPONENTS = gt_components p_strict = abap_false ).
go_tdescr = cl_abap_tabledescr=>create( go_sdescr_new ).
" Create data refence followed by table creation
CREATE DATA gdo_handle TYPE HANDLE go_tdescr.
ASSIGN gdo_handle->* TO <gt_itab_BCCMP07>.
End create dynamic standard table copy of I_TH_REF_DATA
"Generate ref record
create data l_r_data_ref like line of <gt_itab_BCCMP07>.
assign l_r_data_ref->* to <f_interim_data>.
loop at i_th_ref_data assigning <f_ref_data>.
<f_interim_data> = <f_ref_data>.
append <f_interim_data> to <gt_itab_BCCMP07>.Hi ,
Check the code below which is similar to waht you are doing. It gets the existing fields from a structure and then adds some extra fields to it ( decimals 3 )and creates a dyn table. If you need it with decimals 2 then use WTGXXX data element
DATA:lf_startdate TYPE sy-datum,
li_index(2) TYPE n,
la_datum TYPE type_date.
DATA:i_comp TYPE cl_abap_structdescr=>component_table,
i_tot_comp TYPE cl_abap_structdescr=>component_table,
lf_struct TYPE REF TO cl_abap_structdescr,
lf_element TYPE REF TO cl_abap_elemdescr,
la_comp LIKE LINE OF i_comp,
lf_new_type TYPE REF TO cl_abap_structdescr,
lf_new_tab TYPE REF TO cl_abap_tabledescr.
CLEAR: lf_startdate,li_index,la_datum,i_comp[],i_tot_comp[].
*--Getting Compoents from existing type
lf_struct ?= cl_abap_typedescr=>describe_by_name( 'TYPE_PUT' ).
i_comp = lf_struct->get_components( ).
APPEND LINES OF i_comp TO i_tot_comp.
*--Adding weekly bukets fields based on date in selection screen
DO.
li_index = sy-index.
IF lf_startdate GT s_lfdat-high.
EXIT.
ENDIF.
IF li_index EQ 1.
PERFORM get_first_day_of_week USING s_lfdat-low
CHANGING lf_startdate.
la_datum-dat = lf_startdate .
*--Element Description
lf_element ?= cl_abap_elemdescr=>describe_by_name( 'MESXXX' ).
CONCATENATE 'MES0' li_index INTO la_comp-name.
la_datum-field = la_comp-name.
*--Field Type
la_comp-type =
cl_abap_elemdescr=>get_p( p_length = lf_element->length
p_decimals = lf_element->decimals ).
APPEND la_comp TO i_tot_comp.
CLEAR: la_comp.
APPEND la_datum TO i_datum.
CLEAR: la_datum.
CONTINUE.
ENDIF.
lf_startdate = lf_startdate + 6.
la_datum-dat = lf_startdate .
lf_element ?= cl_abap_elemdescr=>describe_by_name( 'MESXXX' ).
CONCATENATE 'MES0' li_index INTO la_comp-name.
la_datum-field = la_comp-name.
la_comp-type =
cl_abap_elemdescr=>get_p( p_length = lf_element->length
p_decimals = lf_element->decimals ).
*--Fill the component table
APPEND la_comp TO i_tot_comp.
CLEAR: la_comp.
APPEND la_datum TO i_datum.
CLEAR: la_datum.
ENDDO.
*--Create type
TRY.
lf_new_type = cl_abap_structdescr=>create( i_tot_comp ).
CATCH cx_sy_struct_creation . "#EC NO_HANDLER
ENDTRY.
*--Create Table type
TRY.
lf_new_tab =
cl_abap_tabledescr=>create( p_line_type = lf_new_type
p_table_kind = cl_abap_tabledescr=>tablekind_std p_unique = ' ' ).
CATCH cx_sy_table_creation . "#EC NO_HANDLER
ENDTRY.
*--data to handle the new table type
CREATE DATA wf_data TYPE HANDLE lf_new_tab.
*--data to handle the work area
CREATE DATA wf_str TYPE HANDLE lf_new_type.
*--Assign to fs
ASSIGN wf_data->* TO <fs_tab>.
ASSIGN wf_str->* TO <fs_line>. -
Conversion from type 'CalculatedFieldWrapperImpl' to type 'Integer' is not valid._
Hi,
I'm using SSRS 2008 to create a relatively simple report with a stored procedure as the dataset. The SP runs fine (no errors) but when I try to run the report I get "Conversion from type 'CalculatedFieldWrapperImpl' to type 'Integer' is not valid. "
error message. The data type is declared as int in SQL. I'm using several other int fields in the report without a problem. Anyone familiar with this error? Thanks.
Robert BocconeHmm, my research also suggests multi-value parameters may be the cause, but you say there aren't any in the report. These sings can sometimes be generated automatically though, even if you haven't knowingly created one. You could try checking the .rdl
file directly (if you're using BIDS, just go to View > Code, otherwise load the report into wordpad or similar) and searching for the term 'Parameter' to see if there is anything there. Otherwise, I'm afraid I'm getting a bit lost for ideas
too.I work to UK time. If this post, or another, answers your question, please click the 'Mark as answer' button so others with the same problem can find a solution more easily. -
IMP-00016: required character set conversion (type 1 to 871) not supported
I am running Oracle DB: 8.1.7.4
Hit a problem when I export from Source DB: US7ASCII
and then, import into Target DB: UTF8.
Is there any workaround if this is the only export dump available?
Many thanks in advance.Thanks for the prompt reply.
Both source and target are in the same version: 8.1.7.4.
The error gotten:
Import: Release 8.1.7.4.0 - Production on Fri Aug 22 15:37:37 2008
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to: Oracle8i Release 8.1.7.4.0 - Production
JServer Release 8.1.7.4.0 - Production
IMP-00016: required character set conversion (type 1 to 871) not supported
IMP-00000: Import terminated unsuccessfully
Many thanks in advance. -
IMP-00016 required character set conversion (type 178 to 871) not supported
Hi, I am importing Portal release 2 handson to our test database whose character set is UTF8,durning importing, the following error message comes out 'IMP-00016: required character set conversion (type 178 to 871) not supported',what should i do? thank u in advance . My mail address is:[email protected] .
Thanks for the prompt reply.
Both source and target are in the same version: 8.1.7.4.
The error gotten:
Import: Release 8.1.7.4.0 - Production on Fri Aug 22 15:37:37 2008
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to: Oracle8i Release 8.1.7.4.0 - Production
JServer Release 8.1.7.4.0 - Production
IMP-00016: required character set conversion (type 1 to 871) not supported
IMP-00000: Import terminated unsuccessfully
Many thanks in advance. -
The conversion of a varchar data type to a datetime data type resulted in an out-of-range value
I am trying to insert records into a temporary table with date values concatenated with other string values into one large string value.I am getting the following error:
Msg 242, Level 16, State 3, Line 12
The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.
Msg 241, Level 16, State 1, Line 28
Conversion failed when converting date and/or time from character string.
-My code below
Declare
@hdrLOCAL char(255),
@CR char(255),
@BLDCHKDT DATETIME,
@BLDCHTIME DATETIME,
@hdrline int
SELECT @hdrLOCAL = DDLINE FROM DD40400 WHERE INDXLONG =1
SELECT @CR = DDLINE FROM DD40400 WHERE INDXLONG =2
SELECT @hdrline =1
SELECT
@BLDCHKDT = CONVERT(varchar(20),T756.PAYDATE,105) ,
-- convert(varchar,getdate(),15)
@BLDCHTIME= CONVERT(varchar(20),T756.PAYDATE,105)
FROM STATS.dbo.DD10500 T762
LEFT OUTER JOIN STATS.dbo.DD10400 T756 ON (
T762.INDXLONG = T756.INDXLONG
AND T756.INCLPYMT = 1
WHERE (T756.INCLPYMT = 1)
AND (T762.DDAMTDLR <> 0)
Create TABLE [dbo].[##DD10200B](
[INDXLONG] [int] NOT NULL,
[DDLINE] [varchar](8000) NOT NULL,
[DEX_ROW_ID] [int] IDENTITY(1,1) NOT NULL,
BEGIN
INSERT INTO ##DD10200B (INDXLONG,DDLINE)
VALUES (1,@hdrLOCAL +',' + @CR +','+ @BLDCHKDT +',' + @BLDCHTIME )
END
Msg 242, Level 16, State 3, Line 12
The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.
Msg 241, Level 16, State 1, Line 28
Conversion failed when converting date and/or time from character string.
The Best thing in Life is LifeSince the Variable
BLDCHKDT and BLDCHTIME are of type date time why are you trying to assign it a value
of type varchar
and the format 105 gives you dd-mm-yyyy but SQL server takes the default format as mm-dd-yyyy so the error occurs for all dates that
are greater than 12
try the below code
Declare
@hdrLOCAL char(255),
@CR char(255),
@BLDCHKDT Varchar(50),
@BLDCHTIME Varchar(50),
@hdrline int
SELECT @hdrLOCAL = DDLINE FROM DD40400 WHERE INDXLONG =1
SELECT @CR = DDLINE FROM DD40400 WHERE INDXLONG =2
SELECT @hdrline =1
SELECT
@BLDCHKDT = CONVERT(varchar(20),T756.PAYDATE,105) ,
-- convert(varchar,getdate(),15)
@BLDCHTIME= CONVERT(varchar(20),T756.PAYDATE,105)
FROM STATS.dbo.DD10500 T762
LEFT OUTER JOIN STATS.dbo.DD10400 T756 ON (
T762.INDXLONG = T756.INDXLONG
AND T756.INCLPYMT = 1
WHERE (T756.INCLPYMT = 1)
AND (T762.DDAMTDLR <> 0)
Create TABLE [dbo].[##DD10200B](
[INDXLONG] [int] NOT NULL,
[DDLINE] [varchar](8000) NOT NULL,
[DEX_ROW_ID] [int] IDENTITY(1,1) NOT NULL,
BEGIN
INSERT INTO ##DD10200B (INDXLONG,DDLINE)
VALUES (1,@hdrLOCAL +',' + @CR +','+ @BLDCHKDT +',' + @BLDCHTIME )
END
the only change done is
@BLDCHKDT Varchar(50),
@BLDCHTIME Varchar(50),
Surender Singh Bhadauria
My Blog
Maybe you are looking for
-
How to allow login using email address (ALIAS) to Abap system
Hi, we are developing some Abap Webdympro to logon to an Abap system, release Netweaver 731, in order to allow our end user to logon via Internet browser to this system. So our Abap system is acting like a Portal system, but it's not a J2EE system, i
-
Download iTunes Version 10.6.8 (old version)
I just bought a new iPhone 5S and I need iTunes 10.6.8 or newer to set up my phone like my old iPhone. I currently have iTunes 10.6.3, and when I try and upgrade iTunes from the app itself it says that I have the most current version (but I obviously
-
Hi, I got Lumia 620 in March and its lock key is not working now. There was no damage in phone and when i visited service center, they said that you may have pressed it hard and due to this, key has been damaged now. They are asking me to replace the
-
HI guys, I am new to BO...just wanted to know that is there any place I can download web intelligence rich client which can work as standlone for trial period.Just want to get the feel of what this application is all about?
-
Mask multiple movieclips by single movieclip
Hi, I have make many thumbnails(t1,t2,t3....) on homepage of my website now i req. to mask all thmbnails by one movieclip(mskMC). Thanks for your support.