Conversion path and process for Output Designer 5.5 to ES

Greetings,
I am looking for information on how to convert Output Designer 5.5 .ifd files to LiveCycle ES files.
Need to know if there are any barriers or pitfalls to be aware of and where can one get a copy of Output Designer 5.5?
Thanks
Rick Kuhlmann
Tech-Pro

Read this - LiveCycle ES2 * Adobe LiveCycle Designer ES2
It says that 'you must install Output Designer 5.5 or later on the same computer as LiveCycle Designer' . Do you have Output designer also available on the same machine>
- Varun

Similar Messages

Problem in setting path and classpath for java in RedHat linux 9

Hi ,
i am not able to set the PATH and CLASSPATH for j2sdk1.4.2_06
I have tried with export PATH=$PATH:/usr/j2sdk1.4.2_06/bin
and export CLASSPATH=$CLASSPATH:/usr/j2sdk1.4.2_06/lib
in terminal
but i want to configure it as permenant way for the jre and jdk
and we should only type java or javac according to the requirement
regards mihir...

type those in .bashrc ... save and exit
then at prompt, type 'source .bashrc'
this is the permanent solution ...
bhalo thakun

What is the cost and process for factory refurbish of a tx2-1375dx with a blown system board?cc=us

What is the cost and process for factory refurbish of a tx2-1375dx with a blown system board?
How would one go about arranging for such service?
Why is it impossible to contact a real human for support, either via online chat or phone?

Last I checked I am a real human, it is just that I do not work for HP and can't speak for them. HP would not be the place I would go for a "refurbish" job. They charge an arm and a leg for out of warranty service. You simply need to find someone to replace the system board (motherboard). It is also very likely on that model that you could have your system board repaired. There are many services on ebay that will repair the motherboard at the component level. The cost would be at or under $100 or so. I have more advice to give but many times I write a detailed response only to have the user never come back. I do check my posts so if you want more ideas just please respond. The tx2-1000 was one of the models affected by the nVidia issue that caused so many HP laptops made in the 2007-2009 era to fail prematurely.

Does a new customer buying creative cloud include download and use of Photoshop, Fireworks, Bridge and Acrobat for one designer/individual?

Does a new customer buying creative cloud include download and use of Photoshop, Fireworks, Bridge and Acrobat for one designer/individual?

Cloud Plans https://creative.adobe.com/plans
-and subscription terms http://www.adobe.com/misc/subscription_terms.html
-what is in the entire Cloud http://www.adobe.com/creativecloud/catalog/desktop.html
-http://www.adobe.com/products/catalog/mobile._sl_id-contentfilter_sl_catalog_sl_mobiledevi ces.html

System status for IDOC creation and processing for production orders

All
I am creating IDOCs for production orders to send requirements to an external WM system for kitting execution.
I need to know whether there are any system statuses to notify me when an IDOC has been created,failed and processed. If not, how do I go about creating user defined statuses for these statuses.
Second question, which idocs should I use to confirm, teco and cancel the production orders from an external system?
Thanks
Evan

HI Evan
u can use the standard program - RBDMOIND scheduled in back ground to update the Idoc staus ,
this helps to update the IDoc Status from
'03 Data passed to port OK ' to
'12 Dispatch OK'
status 03 indicates the IDoc is successfully transmitted to Communication Layer and the Status 12 helps to confirm the data dispatch to the receiving port.

Difference between execution mode of Print preview and Print for Output

Hello,
Can anybody tell the difference between execution mode of print preview and print for an output (For eg. PO output or Invoice)?. I am trying to download some documents linked to Purchase order to desktop. The code is written in the same driver program for printing PO and it is executed after smartform function module is called. It works fine in print preview mode and it fails in print mode. The reason why download fails in print mode is that GUI not available (just found from debugging).
Any ideas?
Thanks
Anil

HI
try using any other printer and find out if you are getting the correct output. The printer needs to support Multiple Unicode encoding schemes like UTF 8, UTF 16BE, and UTF 16LE, plus special characters and logos, bi-directional text layout, and custom characters..

Open dataset twice once for input and once for output in unicode system

Hi All,
In a program
I used a open dataset to read the data from the file.
OPEN DATASET cmp_file FOR INPUT IN TEXT MODE
ENCODING NON-UNICODE.
Then i closed the file.
Again later in the program,
I used a open dataset to transfer the data.
OPEN DATASET cmp_file FOR OUTPUT IN TEXT MODE
ENCODING NON-UNICODE.
But this time I get sy-subrc = 8.
Unable to open the file and subsequent TRANSFER is leading to the runtime error.
Note : I am using a unicode system
I could run the same program well in non-unicode system..
->
Is it that if a file contains data already
1.I need to delete the data and open it
or
2.I need to open in APPENDING mode manadatorily...
in case of UNICODE system..
Kindly suggest..

Hi,
IF you have write permission al S.O. Level you need to check your DATASET rigths using AUTHORITY_CHECK_DATASET, this validate your rigths with S_DATASET object.
Example
TYPE-POOLS SABC.
CALL FUNCTION 'AUTHORITY_CHECK_DATASET'
EXPORTING PROGRAM = 'ZDATASET'
ACTIVITY = SABC_ACT_READ
FILENAME = '/tmp/sapv01'
EXCEPTIONS NO_AUTHORITY = 1
ACTIVITY_UNKNOWN = 2.
See SABC type pool to know wich activities are aviable.
Hope this help.
Regards

Standard script and code for output control ticket in IW32

Hi,
I am working on a output control ticket which gets printed using transaction IW32.
I have to create Z driver program and z form and attach it to shop paper.
I just wanted to make sure that RIPRCT00 and PM_COMMON are the standard program and form for this output control ticket.
Because even though if I keep a break point in the program RIPRCT00 to see the data its fetching, when I do the print preview after going in IW32 I don't go inside the standard program RIPRCT00.
So I am wondering if RIPRCT00 and PM_COMMON are the standard prohgram and form attcahed with output control ticket ?

You must enter something in the form. The reason for this is because in the program when it is going to execute the print of the papers, it is call the subroutine(form) of the print program. It gets these values from your configuration in SPRO. It is doing something like this.
perform print_paper in program zriprct00.
Of course, "print_paper" and "zriprct00" are variables retrieved from the configuration.
So, in summary, In SPRO, configure the output type to use the PRINT_PAPER form of program "ZRIPRCT00" and the sapscript form ZPM_COMMON.
If you are developing a completely new "Z" print program, you must have an entry point in which the program is executed. You will have to have a subroutine(form) very simular to PRINT_PAPER, or you can just copy and paste that code into your new program.
Make sense?
Regards,
Rich Heilman

System status or user status for IDOC creation and processing for prod ord

All
I am creating IDOCs for production orders to send requirements to an external WM system for kitting execution.
I need to know whether there are any system statuses to notify me when an IDOC has been created,failed and processed. If not, how do I go about creating user defined statuses for these statuses.
Second question, which idocs should I use to confirm, teco and cancel the production orders from an external system?
Thanks
Evan

For the first part of your query refer to the technical forums.
For the second part - refer to Idoc - LOIPRO01, it has a segment for Order status, that should be of interest.
Attn Moderators
I think it would be better to move this thread to a technical forum, so the requester can get the most relevant information.

Sap interaction center web Clint in the IDES Path and settings for practic

Dear gurus,
I want to do some practice on web Clint I already installed IDES 4.0 CRM server in my lap top can any body help me out how to login in the WEB client to practice. Path and necessary settings.
If it is not possible please educate me in which version it is possible to practice.
And also please send some good book for practices I have the building block but I need some good guidance and a beginners guide.
with Regards,
Prakesh

please do the need ful.
with Regerds
prakesh.

Need a document with steps and process for IBCM implementation

Dear Frds,
I need a documents which contains steps and process to implement IBCM for SCCM2012.
I have following things in Intranet:
1) SCCM2012 in intranet and clients are reporting at this movement.
2) Intranet based Domain PKI infra.
Thanks.....
Raja

I strongly suggest taking a look at Direct Access. Most people looking at IBCM end up going with Direct Access since it requires fewer steps/less infrastructure and yet provides far more value.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

Designing and rendering for output on an HD LCD monitor 16:9

Hi,
I've just completed an animation at 720 x 480 pixels.
I made sure that all my images imported were larger than I needed, just in case.
I need this to be played on a 42 inch monitor 1080 p.
I just realized that 720 x 480 is going to be pixelated on that size.
what output settings do I need to choose to make it look good on 42 inch plasma 1080p
If this is a dumb question I'm sorry, then please point me to some tutorials. All I can find are tutorials on how to do whiz bang effects, there aren't many simple ones for stuff like this.

It depends on what device you will use (ie, connect to the LCD TV) to feed the content.
Widescreen DVDs are always 720x480 anamorphic (like the NTSC DV Widescreen preset in AE), and if all other variables are good (source material, encoding, etc), they can and do look terrific. Contrary to popular belief, there evidently are other aspects to image quality, besides pure pixel count.
If you want better than that and send HD video to your TV or monitor, it can't be a DVD. A DVD-Video disc is always standard definition. So, it has to be a Blu-Ray disc, or hook-up a computer display output to the LCD TV, or use one of the very affordable HDMI-capable media players (such as the Western Digital TV, or Popcorn Hour, for example).
In all of these cases, you can pick the HDTV 1080 Composition preset in AE, with the frame rate you need. The resulting Composition will be 1920x1080 with square pixels.
For Blu-Ray output you need an authoring application like Adobe Encore and a Blu-Ray burner (and player, obviously).
To send HD video from a media player like the the WD TV, or from a computer hooked up to your TV, you usually want to encode a high-bitrate H264 or MPEG-2 video file.
Since this is too broad in reach, once you figure out which route you want, let us know and we'll try to help with the details.

Managing the process for print design

Hi,
I like to know if there is some kind off managing system for creating a print design. Sometimes it happens that the final designs go to the press white still something wrong. I made a check list but that doesn't work, because it's unpractical when you have a very tight deadline.
So I'm looking for something more practical, that force the project manager to let the final designs being checked by; copy, specs and content, before sending it for pressing.
Big thnx!

Wibo,
Agree 100% with what Neil and John are saying but some clients are more responsible than others. I went through this a while backwhile every care is taken a lot of our entry come directly from client supplied text or tables inserted into our databases. For this reason I wanted to make the client aware and a bit more responsible for what was finally going to be printed 5000 or so times.
We came up with that attached sign off form to guide the client in checking. It is normally a pdf form which allows for n/a to be filled in for non applicable check boxes. I also decided it was important to highlight with the client that the list is not a through list of things to check but a general roadmap of the type of things to think of.
Also as a lot of our projects are handed off to the client for printing and in these days of digital proofs often the proofs are also press ready files we included the disclaimer that the artwork is not released by us for reproduction until the client returns the signed form. Their call if they go print without returning the form but we have supplied the data for proofing not final production.
As we tackle all sorts of mapping jobs we were after something generic that covered most of our small to medium sized projects - these can range from a $300 custom map supply which may only take an hour to produce to an $10k project that spans a year or two by the time all the data is captured and various revisions actioned.
Obviously for larger contracts the sign off and revision is a more formal and specific process.
Hope the attached image helps sorry about the rough Acrobat PNG export. I think some of the attached wording even came from Neil's initial suggestions.
http://www.flickr.com/photos/unitseven/2867283340/sizes/o/

How can I set the file name and folder for output to PDF from another application?

I am developing an application in Microsoft Access where the printed reports are to be saved in PDF format for archive purposes. I can send the output to Adobe X, but the default file name is the Access report name and the folder selected is the one last used.
What I need to do is to create the file with a specific name (which changes for each run) and to a specific folder (which also changes for each run).
The language I'm using is Visual Basic for Applications which is located in an Access form that controls the report production.
Any suggestions, please?

Got it - many thanks.

Calling another program and waiting for output

Hi,
I'm writing a program that passes a file created for an application called Net Sim but has to wait for the output. Net Sim lies in another directory from the java files and I don't know how to call the program with the file created as a parameter, such as:
ns2 network1.tcl
where 'ns2' is the dos command to run net sim and 'network1.tcl' is a file passed as a parameter to the program.
I've tried
try{
Runtime r = Runtime.getRuntime();
r.exec(" <directory> ");
}catch(IOException e){
System.out.println("Error " +e);
This doesn't work though and I could use some help, as well as how to save the file created by the program in another directory.
Finally, I need to know how to make the program wait for the output from net sim which is a file I intend to use. Can I do this with a while loop etc.?
I thank you in advance for any help,
Regards,
Gary.

Here's an article from JavaWorld describing some of the pitfalls when using Runtime.exec() that might help you:
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html

Conversion path and process for Output Designer 5.5 to ES

Similar Messages

Maybe you are looking for