Conversion Problems between Mac and Windows

I work in a school district that is running an old version of Adobe Photoshop CS3 in a Macintosh environment. The Macs are old 10.4.11 machines that would not print. So, I set up a Windows Server with Macintosh accessible folders and copied files to this server. I then had newer Windows 7 client machines availabe and copied the files over to their client machines. Some of the files came over to Windows as CS3, but others didn't. They show up as "File" in the format and not as CS3. Is there a workaround for this, or another way to get these files to Windows?
Thanks.

Make sure proper file extensions (e.g., .psd, .jpg, .png, etc.) are put on each file. Depending on settings, Mac users don't always do that.
On your Windows systems, disable the [ ] Hide file extensions for known file types setting in Folder Options, then the problem will become obvious.
-Noel

Similar Messages

Time zone problem between mac and windows

i'm running os x snow leopard on one partition and windows 7 on another on a 2008 mbp. whenever i log into windows and then get back onto mac, my time is completely off. i can temporarily fix it by removing the local time file, which resets it, but every time i log into windows and back i get the same problem. i've tried turning off the automatic time zone, tried turning off auto everything and just setting the time myself and it always goes back to being messed up after a trip to the windows partition.
anybody got a fix?

For windows users can you create a connection key in Windows machine and send the same.

Connection key compatibility problem between Mac and Windows

I'm wondering if anyone has had this problem and came up with a work-around?
We are rolling out Contribute CS5 to some employees.
The designers (I'm one of them) are all on Macs. Everyone else is on Windows XP.
We are connecting to our sites via local/network. IT didn't want to set up FTP (I won't go into why right now).
So, here is where the problem is... We set up the site and do the first connection on our Macs. Then when we send out a site key, to a Windows user, the key is no good. This is because Macs handle paths to network shares differently than Windows does.
I thought the solution would be to customize the key with the Windows share path before sending it to the Windows users. However, Contribute wants to verify the path before letting me continute to make a customized key. And that is where I'm stuck. Is there a solution to this - besides switching to FTP?
Thanks,
Ward

For windows users can you create a connection key in Windows machine and send the same.

Transferring keyboard shortcuts between Mac and Windows

I need to migrate users from Mac (CS 5.5) to Windows 7 (CS 6). I have tried to transfer a user's custom keyboard shortcut set by copying the .indk file to the appropriate folder on the PC, and although it shows up in the list, when I try to select the set I get an error saying it is in the wrong format or the file could be damaged. Is there a way of transferring keyboard shortcuts between Mac and Windows?

Shortcut sets seem to be human-readable text files, so you could try making a copy and doing some editing, changing cmd to ctrl and opt to alt, and change the platform value in the first line to "win" though I can't make any promise it will work.
There are also some known problems trying to migrate legacy sets into newer versions of ID since CS5, I think.

Share files between Mac and Windows in same iMac with boot camp

Hello,
I am new in using Mac and recently I buy a IMac 24" model.
I used to use PC a long time with a lot of old document.
I want to install Windows XP with boot camp.
But I also want to share my documents, music, video files between Mac and Windows in same iMac.
How can I do this?
Thanks in advance,
Eric

Hi Eric and welcome to Discussions and the Apple world.
Mac OSX can read and write from Windows partitions (like the BootCamp Windows partition you are about to create) when using FAT32 as file system for Windows.
However with FAT32 you are limited to a partition size of 32GB.
Mac OSX can also read from Windows partitions that uses the NTFS file system, but it can not write to them unless you use a third-party helper like either Paragons NTFS for Mac http://www.paragon-software.com/home/ntfs-mac/ or NTFS-3G http://www.ntfs-3g.org/
Windows can not even see or use a Mac OSX partition without additional help by MacDrive http://www.mediafour.com/products/macdrive/
Regards
Stefan

Help: symbol shifting between mac and windows, flash cs3

I'm doing work reviewing flash files created by other users
on mac and windows. I'm using os x 10.5.6. When I open a file
created in windows / flash cs3 some symbols on the stage will have
shifted upwards on the y axis. If I correct the shift and then send
it back to the windows user they see the symbols incorrectly
aligned, as if I had moved symbols around on a correctly aligned
file.
The strange thing is not everything on the stage is shifted.
Only particular symbols will move, and it's usually symbols only
(not text frames, drawing objects, etc).
I believe there's a general history of bad behavior when
saving flash files and trading them back and forth between mac and
windows, but does anyone know what may be causing this? Or a
remedy?
Thank you in advance.
Peter

also, I tried opening the same files in vista using a mac
mini with vista installed on a bootcamp partition. When opening
other windows authored flash files there I had shifting issues as
well, so I'm not convinced it's strictly a mac vs. windows issue.
Unless it's a flash cs3 on windows xp doesn't like mac flash cs3
and vista flash cs3...

File transfer between Mac and Windows

I am running Windows on my Mac and I transfer files between mac and Windows alot using my external hard drive. I was wondering if there was an easier way to do this than having to use my external hard drive like a networking solution or something. Thanks...

i also run windows on my mac (for work). The issue i had was that when booted in osx, i could see the windows partition, and copy files FROM it to the mac side, but i could not copy files TO the windows partition.
As i understand it, this is because the apple NTFS driver (to read the windows partition) only allows read access (not read and write access). It was easily solved with MacFuse (which is an open source way to add different disk file systems to your mac, kind of like teaching it a new language), and NTFS-3G for mac osx.
http://macntfs-3g.blogspot.com/
scroll down a bit for the download link. The installer will put in MacFuse and NTFS-3G, so it's the only one you need.
After a reboot, i can read/write to the windows partition while booted into macosx (and it's free).
i hope that helps.
p.s. the efi boot manager download is NOT required.

Syncing between mac and windows

I have an issue where I have created files in Adobe Draw (and previously in Ideas) which I have then saved to the Creative Cloud. I open these files in Illustrator on my Mac, save them back to the cloud then open them on a Windows PC. When I save these files on the PC, I get the Unable to Sync Files error message. I have gone through these solutions Error: "Unable to sync files" but no solution applies. If I create a file on my PC, it syncs fine. Is there a known issue when sharing files between Mac and Windows? I can save the files to Dropbox or email them and I don't have this issue. Thanks

Hello,
Would you be able to send me your log files so I can better see what might be causing this issue issue. I will need Logs from both your Mac and Windows machines please.
You can find your log files at...
Mac:
/Users/<username>/Library/Application Support/Adobe/CoreSync
Windows:
C:\Users\<username>\AppData\Roaming\Adobe\CoreSync
'Library' on Mac and 'AppData' on Windows are both hidden folders. Please read these pages for help on showing these folders:
http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-extensions.html (Win)
https://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html (Mac)
please upload them to Creative Cloud and send me a link to the logs at [email protected]
Thanks
Warner

Firewire between Mac and Windows

Hi,
I'm having some problems to connect Windows 7 and Mac OS X (10.6.5) with firewire.
I've installed ubcore drivers (from unibrain) on windows to have firewire network drivers.
The network works perfectly between Windows and bootcamp, between Mac and Linux, and in target mode between the MBP and windows. But i've got an error when i try to connect Windows and Mac.
Windows seems to have a new hardware connected, and is searching for drivers that it doesn't find, and Mac gives me an error :
ERROR: FireWire (OHCI) Lucent ID 5901 built-in: handleUnrecoverableErrorInt.
It seems like Mac is not mounting a network connection over the firewire, but something else.
Is there a way to force network mode for firewire ? Or is the problem somewhere else ?

So, i've got my answer.
You can't use firewire between Mac OS X 10.6.5 and Win7. Unibrain doesn't support it, and i can't find any other way to make it work...so you just can't.
So sad :'(

Switching between Mac and Windows platforms

Hi there
Are there any problems with using an external hard drive and moving back and forth between a Mac and a Windows PC? I'm mainly using MS Office documents but am concerned that they might corrupt if I switch back and forth betwen Mac and Windows.
Any pointers or suggestions?
Cheers

Hi Sharif,
Thanks for your answer. If I could just ask for some clarification
Sure thing, tht's why we are here, aren't we ?
If I buy a new external drive, should I then use Disk Utility to format it according to the guidelines you've given?
1. Start Disk Utility
2. In the left pane click on the external harddisk
3. Click on the 'Partition'-Tab in the right pane
4. Choose 'One Partition'
5. Choose 'MS-DOS' and enter a "Name"
6. Click on the 'Options'-Button and set MBR as partition scheme
7. run the partitioning
And in doing so, this will make the drive stable across platforms?
Has worked for me on a number of external harddisks.
Although I personally share the hatters opinion about NTFS being the better file system.
But as said you have to use a third-party helper in OSX to write to NTFS harddisks.
Regards
Stefan

Nano as a flash drive between Mac and windows

I intended to use the nano as a flash drive. I use Apple at home, but have to use windows at work. My other flash drives have no problem moving files between both. But when I connected the nano at work, Windows gave me some initialize message. Would that delete my data on nano? I just disconnected and wait for your help.
How can I use the nano as a flash drive between my mac and windows at work?

Check what the iPod's format is; if the iPod nano is in Mac format, it can't be used on a PC which doesn't have third-party software such as MacDrive installed onto it. Initializing or restoring your iPod will erase everything on it.
(8873)

How to prevent iTunes for Windows from "Updating iTunes Library"? (Library is on a NAS and managed by iTunes for Mac. Now getting update wars between Mac and Windows versions of the player.

How to prevent iTunes for Windows from "Updating iTunes Library"?
My library is on a NAS and managed by iTunes on a Mac. I can connect from wife's Windows laptop using iTunes for Windows but every time I do, it Updates iTunes Library. Next time I log in from my Mac it Updates iTunes Library in return. It appears I'm experiencing "Update Wars" between the Mac and Windows versions of iTunes. I would like to allow my wife to stream iTunes songs to her new laptop but I don't want any updates from this source... prefer to manage the library from my Mac and not allow Windows to do any thing other than listen to existing playlists.
Thanks for any help/suggestions.

Connect the PC to the library on the NAS. Wait while "updated".
Under Edit > Preferences > Advanced make sure the media folder is correctly pointed at the media folder on the NAS. If not correct, close iTunes, wait a few moments, then open iTunes again.
Close iTunes on the PC. Do not open iTunes on the Mac.
Copy the library files, iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork into an empty iTunes folder on the PC, for example C:\iTunes.
Click the icon to start iTunes and immediately press and hold down SHIFT. Keep holding until prompted to choose or create a library. Click choose and browse to the copied .itl file, e.g. C:\iTunes\iTunes Library.itl
The library should now work properly on the PC, however check the setting for the media folder. If needs be correct, close iTunes and reopen.
Open iTunes on the Mac. It will update again, but that should be last time.
tt2

1 hd with 2 file formats for use between mac and windows?

Think this is the right forum...
I want to instal a program onto an external hard drive for use on both mac and windows. The program supports both mac and windows.
My plan is to get an external hd and partition it in half. One half i will format mac os extended and the other i will format ntfs. I'll instal the mac version on the mac partition and the windows version on the ntfs partition.
This should work i'm thinking, yes? I.e. when i plug it into windows it'll run the windows installation no problem and when i plug it into the mac it'll run the mac installation no problem?
Thanks.

An easier solution might be to just connect the drive to a Windows PC and format it as FAT32. Both Windows (98 and higher) as well as Mac allow full read/write access to FAT32 formatted drives. No need to download any drivers, etc. It just works.
Yes, this solution is not perfect, but none are. The free NTFS drivers for Mac are not most efficient drivers for speed/performance, the HFS+ drivers for Windows are not cheap, and have their own performance issues, and FAT32 has the limit of file sizes over 2GB (or is it 4GB now?) not supported. No one solution is perfect, but for the many one is better than the others, but it all depends upon their circumstances which is "better".

HT1452 I want to reset the permissions on a western digital external hard drive to work between mac and windows... How can I do this easily?

I have a MacBook Pro and have recently bought a Western Digital external hard drive. I used it on my windows laptop first and unfortunately now on the Mac it is read only. How can I set it so that I can use it successfully between the both the Mac and windows laptop?
Thanks

MacQuack wrote:
You will need to pull all the information off first. The formatting will erase it all.
Use Disk Utility (in Applications >> Utilities or use Spotlight to find it). On the left select your WD drive and then select the Erase tab. Where it says Format, select exFat in the drop-down menu. Next, click Erase and done. It will take approx. 5-15mins to re-format.
Cons: You will be unable to store files 4GB or larger in this format (usually only dmg/iso files or large Outlook files). Also, you will be unable to use Time Machine or other auto-backup programs.
That is not entirely correct, there is no 4G limit using exFat, FAT32 is the one with the limit.

Has anyone tried home sharing between mac and windows using parallels on the same machine?

I recently purchased a mac, and plan to set up parallels for windows and windows 7 so that I can use the Windows version of Over Drive Media Console from the library and download WMA files in windows (limitation with mac version for wma downloads). I would like to synch to iTunes on the Mac iOS, but will need iTunes available in Windows to transfer the books I download in WMA format from the library to my iphone. Has anyone tried this? Any success or suggestions would be appreciated!

In case anyone is interested, last night I installed Paralells, Windows, Overdrive Media Console on Windows, and then was able to download my book in WMA format. I was hoping parallels would allow me to crossover sync to iTunes on the Mac and have Overdrive recognize that I had iTunes open, but I had to choose Windows or Mac when connecting my phone through the USB and had to choose Windows in order for it to successfully transfer. I was able to get it to work it is now synced to iTunes in Windows. The nice thing was that it pulled in all my music/apps that I had set up in the Mac side, so I didn't have to go through that exercise again. I tested it on my old phone. Now I need to decide if I want to set up my current phone on Windows or Mac, it seems that once synched it only opens the device in windows, I haven't figured out how to force the choice between mac or window again. If I do windows, I can't take advantage of the cloud or iphoto/imovie directly. I'm totally new to mac, but I think I'll have to import my photos manually.

Conversion Problems between Mac and Windows

Similar Messages

Maybe you are looking for