Conversion program generated with errors
in lsmw idoc method at the step 11 convert data iam getting error as conversion program generated with errors can some body help me .i assigned port ,partnertype and partner number and activated inbound processing but still getting this error.somebody pls help me its urgent.
Hi Mamidi,
Go to the LSMW you have choosen and if it is Recording Method you are getting this error.
Select Goto-->Recordings.
Select the Recording you have choosen in the Edit Mode.
Click on the Defaults All Button and save the recording.
Now go to the option Convert Data and check .
You will receive a message ..Conversion program successfully generated.
Thanks,
Sri
Similar Messages
-
Program ended with error or warning, return code: F
Friends, During client export i am facing below mention error, Pl suggest asap
Client export from 06.04.2011 18:00:44
System ID............................ PPT
R/3 Release.......................... 700
Basis Support Package...............SAPKB70018
Host................................. pptest
Start in background............. .....X
User................................. SUPER
Parameter
Source client........................ 500
Source client user masters............500
Copier profile:.......................SAP_ALL
Table selection
Command file......................... PPTKT00008
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0012
Error exporting request PPTKT00008 23:40:31
Program ended with error or warning, return code: F
Runtime (seconds) : 20,390
End of processing: 23:40:33There could be three things possibly causing this error:
1. There is some database issues, that is the connection to the database maybe is lost that's why TP ends.
2. The TP return Code can also arise due to issues at the OS level, where SAP is installed.
3. Due to permission issues also this can creep in. By permission issues I mean there are not enough permissions, please use trace ST01 and run the process again.
Also please paste the Imort Log, as it can help in further analysis and with that please give your database and OS informations. -
Tp program ended with error code 0012
during export client from PRD to QAS i got the following error
3 ETA072 Exit program "CLIENTCOPY_SELECT_TEXTID_ALL" successfully executed "20:13:54"
2 ETA090 Command file for "tp" is written under: "PRDKT00029" "20:25:04"
2 ETA091 For client transport, " 55,612" entries entered in command file
2 ETA090 Command file for "tp" is written under: "PRDKX00029" "20:25:04"
2 ETA091 For client transport, " 419" entries entered in command file
2 ETA375 Transport program TP started successfully for "PRDKX00029" "20:25:05"
1 EXT200 Transport control program tp ended with error code "0012""A tool used by tp aborted""EXPORT PRDKT00029 client500 U18 pf=/usr/sap/tr
1 ETA377 Error exporting request "PRDKT00029" "20:54:04"
1 ETA146 Program ended with error or warning, return code: "F"
1 ETA027 Runtime (seconds) : " 2,455"
1 ETA152 End of processing: "20:54:04"
any can help me
ThanksHi Ehab,
Yes !..
ALOG and SLOG can help analyze the problem and provide you the possible solution...
Make sure that you are using updated KERNEL and TP program before exporting the client..
Regards.
Rajesh Narkhede -
Windows 7 is Error reporting when running a program generated with in Labview LV 7.1!
Dear Labviewer's
Once back in the yaers I'd generated a program with - Labview 7.1.
Now I'm informed that the version LV 7.1 is not supported by Windows 7.
Now when i try to run the Program generated by Labview 7.1. in windows 7 , I get communication error by the serial port.
Is there somehow somthing I can do to get this work. Is there any Runtime engines From NI for Windows 7.?
Please Feed back if anyone got info for help.
4 Stars ...
HFZ
Solved!
Go to Solution.Have you installed a newer version of the NI-VISA runtime engine that will work with Windows 7?
The most recent on the NI website appears to be version 5.0.3.
http://joule.ni.com/nidu/cds/view/p/id/2257/lang/en -
hi alll....
I am on working on Oracle Audit trail for mtl_system_item_b (ie. whenever item is changed, created or deleted , i want to track the data, who delete that item and wat item). I followed the below steps to perform that.
Steps 1:
sysadmin ->Security : AuditTrail->install. I checked weather audit trail is enabled for oracle inventory (ie, in screen i query for inv under oracle username tab and checked weather enabled box is checked).
Steps 2:
Creation of Audit group
navigation : AuditTrail ->Groups.
Application Name: Oracle Inventory
Audit Group: XX inventory
Group State: Enabled
I added audit tables to this group
User Table Name: MTL_SYSTEM_ITEMS_B
Steps 3:
After creation of audit group i run the Concurrent program “*AuditTrail Update Tables*” . It has no parameter..
The request is ended with errored when i ran. Plz help me... Its urgent.
I checked with log file too. It has so many page. finally it displaying
fatal error in fdasql,quitting...
fatal error in fdacv,quitting...Hi,
Search the log file for more details about the error.
You may also review these documents and see if it helps.
Note: 353326.1 - Audittrail Update Tables : Fatal Error In Fdasql,Fdacv,Fdaupc When Create View
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=353326.1
Note: 563116.1 - AuditTrail Update Tables Program Fails with "Fatal error in fdasql, quitting..."
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=563116.1
Regards,
Hussein -
Dear All, I am running Creat Autoadjustments, but program ends with error.
Your kind help will be appreciated...
Oracle Receivables: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
ARXAAP module: AutoAdjustment
Current system time is 26-JUL-2012 09:44:17
Starting ARXAAP program
entering main
Current system time is 26-JUL-2012 09:44:17
Invoice Currency: BHD
Remaining Amount: 0 500
Remaining %:
Due Date:
Invoice Type:
Customer Name:
Customer Number: 043 043
Option: 0
Adjustment Type: CHARGES
Activity: 1062
GL Date: 2012/02/29 00:00:00
Adjust Related Invoices: N
Reason Code: CHARGES
validating gl_date
out of validating gl_date
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Finished executing request completion options.
AR-ARXAAP: ERROR from afpoget - Terminating Program
Concurrent request completed
Current system time is 26-JUL-2012 09:44:17
Edited by: Ramesh Ippili on 25/07/2012 11:42 م
Edited by: Ramesh Ippili on 25/07/2012 11:42 مPlease refer MOS note: Autoadjustment Process Fails With An ERROR From AFPOGET [ID 142549.1]
to fix this issue.
regards, -
Autoinvoice Import Program finished with error
Hi all,
We are using EBS 12.1.3. The concurrent program "Autoinvoice Import Program" has finished with status "Error". We checked the log file and there is a message :
ERROR: from eBusiness Tax - return code = 2 Current system time is 09-04-2012 17:45:37Unfortunately this doesn't mean anything to me... Can anybody help me with this issue? This program worked before, no changes recently made...
Thanks in advance,
Bahchevanov.it seems that the error may occur even the interfaces tables are empty... i checked the notes : How to Capture a Debug Log or Trace File and Diagnostics for AutoInvoice in 11i and R12 [ID 1079666.1] and
How to obtain and read a debug logfile for R12 E-Business Tax (EBTAX) [ID 417238.1]
I executed the debug suggested in these docs and i received the following error in stored in a table FND_LOG_MESSAGES: ZX.PLSQL.ZX_SRVC_TYP_PKG.IMPORT ORA-01001: invalid cursorAny ideas? I saw the package and the procedure but don't know what to do with it....
Thanks in advance,
Bahchevanov. -
Script to drop/re-create sequences is generated with errors
Hello,
I'm migrating an Oracle 10g instance running on Solaris 10 to an Oracle 11g instance running on RedHat Linux. I'm following the "Platform Migration" White Paper ( URLhttp://www.oracle.com/technology/deploy/availability/pdf/maa_wp_11g_platformmigrationtts.pdf ).
In the appendix, there's the code for a script that's supposed to generate an SQL script that drops and re-creates the sequences on the target machine:
set heading off feedback off trimspool on escape off
set long 1000 linesize 1000 pagesize 0
col SEQDDL format A300
spool tts_create_seq.sql
prompt /* ========================= */
prompt /* Drop and create sequences */
prompt /* ========================= */
select regexp_replace(
dbms_metadata.get_ddl('SEQUENCE',sequence_name,sequence_owner),
'^.*(CREATE SEQUENCE.*CYCLE).*$',
'DROP SEQUENCE "'||sequence_owner||'"."'||sequence_name
||'";'||chr(10)||'\1;') SEQDDL
from dba_sequences
where sequence_owner not in
(select name
from system.logstdby$skip_support
where action=0)
spool off
I have run it on my Solaris machine, and it generates a file that looks like this:
/* ========================= */
/* Drop and create sequences */
/* ========================= */
CREATE SEQUENCE "MDSYS"."TMP_COORD_OPS" MINVALUE 1000000 MAXVALUE 2000000 INCREMENT BY 1 START WITH 1000000 NOCACHE NOORDER CYCLE
CREATE SEQUENCE "MDSYS"."SDO_TOPO_TRANSACT_SUBSEQ" MINVALUE 1 MAXVALUE 999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE ORDER NOCYCLE
I don't have any "drop sequence" commands, and there is no semicolon (;) at the end of the "create sequence" lines, so those are not executed.
I'm not at all familiar with PL/SQL, could somebody point me to the error?
Thank you,
AdrianWhy do you need the "REGEXP_REPLACE ()" function?
This would be simpler:
SET long 32000 longc 80 pages 0 lin 80 trims on
COL ddl wor
SELECT 'DROP SEQUENCE "'
|| sequence_owner
|| '"."'
|| sequence_name
|| '";'
|| CHR (10)
|| DBMS_METADATA.get_ddl ('SEQUENCE', sequence_name, sequence_owner)
|| ';'
|| CHR (10) DDL
FROM dba_sequences
WHERE sequence_owner NOT IN (SELECT NAME
FROM SYSTEM.logstdby$skip_support
WHERE action = 0);
/:p -
Smartform pdf generated with error
Hi Gurus,
Need your help.
I had converted smartform to PDF and sent it as attachment to mail ( 3 PDF's) the loop is running fine and I got all the three
PDF's as mail attachment but only one I am able to open rest to file damaged.
the process goes like :
1.select upto 3 rows
2. loop the three rows one by one.
3. within first loop entry.
3.1 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
3.2 CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
3.3 CALL FUNCTION V_FM " ( calling generated func module )
3.4 CALL FUNCTION 'CONVERT_OTF'
3.5 CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
then back to second loop entry and third , But when I check my inbox only 1 PDF is generated properly rest are file damaged.
I am working on - EHP4 ERP 2005 ECC 6.0 - Retail can I use cl_bcs in above?
Edited by: DeepakNandikanti on May 24, 2010 7:02 AMHi Aidan,
Thank you for your reply,
I have done the SCOT setting,
could you tell me how to pass OTF data obtained from Function module below to send as mail:
CALL FUNCTION V_FM
EXPORTING
CONTROL_PARAMETERS = W_CTRLOP
OUTPUT_OPTIONS = W_COMPOP
USER_SETTINGS = 'X'
WA_LFA1 = WA_LFA1
IMPORTING
JOB_OUTPUT_INFO = W_RETURN
TABLES
IT_POTAB = IT_POTAB
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* End of: Call Generated Function Module
I_OTF[] = W_RETURN-OTFDATA[].
Using which parameter of function SO_NEW_DOCUMENT_ATT_SEND_API1 should I send the OTF data.
Regards,
Deepak -
Transport control program tp ended with error code 0008
Hi !
I trying to realize an export of client like that :
Source Client 400
Target System: ASI
Copy Type Client Export
Profile SAP_RECO
Status Ended with Errors
User ST01051
Start on 17.06.2009 / 17:41:00
Last Entry on 18.06.2009 / 00:20:40
Transport Requests
- Client-Specific ASIKT00028
- Texts ASIKX00028
The export ended with this error :
Transport control program tp ended with error code 0008
Error when exporting request ASIKT00028 00:20:39
Program ended with error or warning, return code: F
What happen ?
If somebody can help me to solve this problem ?
Regards,
Johanhai johan ,
of the return code is 008 then it is error,
what have u transported to target just chekc the log an du might find the error ,
just click the expand button of the error and u will get the detials what errror occured
may be some objects might be inactive just chekc once
m.a -
Transport control program tp ended with error code 0016
Hello colleagues,
We are getting the following error when exporting system HRP to HRI:
Transport program TP started successfully for HRPKX00005 21:25:45
| Transport control program tp ended with error code 0016
| Error exporting request HRPKT00005 00:59:50
| Program ended with error or warning, return code: F
| Runtime (seconds) : 13.876
| End of processing: 00:59:50
Please could you kindly help us to solve the issue?
Thanks in advance.
Best regards
Edited by: Víctor Barahona Cimas on Nov 12, 2009 3:33 PMok thanks
-
Client export SCC8 - ended with errors
Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloanHi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan -
Client Export ended with errors
Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloanIn Al11 what does DIR_TRANS pointing to?
Make sure you have enough space there as it will export the 2 files to the transport directory.
Have you tried Remote Client Copy.
Thanks
Adil -
Check Event Alert failed with error - No errors in the log file.
Hi All,
I am developing a simple event based alert on PO_HEADERS table. I want to send alerts when a PO is created.
I did all the steps according to the metalink note How To Send An Email In A Simple Periodic Or Event Alert? [ID 1162153.1]
When i create the PO, the alert is triggering, and Check Event Alert concurrent program is running. But the program completes with error.
Checking the output file (empty) log file (no errors)
What can i do here to find out what is the problem? There is nothing in the Alert Manager - History form also. I have kept 7 days as days to keep.
Thanks!
MCan you find any details about the error from the "View Detail" button (the same window where you check the log and output files)?
I found the Workflow logs, I am not sure what I am looking for, but i am not seeing any errors reported.The event viewer is supposed to send an email, so do you see anything in the logs that could be related?
Thanks,
Hussein -
India - VAT Invoice Generation / Accounting Completed with Error
Hi,
Can any body explain why below program completed with error
"India - VAT Invoice Generation / Accounting"
I checked completion text,It's showing Normal completion,
Regards,
ReddyHello..
is there any one to help me???????
Maybe you are looking for
-
Can you open from 'google' for example, a link in a new window?
Hi, What i want to be able to do is open a link on one web page, but make this open into a new web page whilst retaining the original page. If you don't understand what i mean i will try re-word it, but that about the best i can do at the min. Many t
-
Photos are not displayed in events/faces/photos but do when magnified
I just reinstalled my OS from 10.6 back to 10.5 (software compatibility). When I imported my iphoto library which I had backed up, everything imported, but I cannot see any of the pictures unless I double-click to magnify. I can see the white dashed
-
Linksys active x problem with web pages
When i install linksys active X for viewing live video with camera WVC54GCA i cannot open other web pages.I am using Windows XP and Internet explorer 8.Is there any solution for this problem??? Solved! Go to Solution.
-
[10.1.2]Problem with adminoc4j
Hi I am trying to using OC4J standalone edition 10.1.2.0.0 with the JDK 1.4.2 from SUN . I added teh configuration for activate the admin_web application. When I try to do any administrative task, I have the following error : java.lang.NullPointerExc
-
hello, I have an iphone 4s and when i try to use facetime to call my friend whom owns an iphone 4 nothing happens. It rings, at least when i make the call, i can hear it ringing, but he does not get the call. We try to make the call from his iphone a