Conversion program RFCONVTP not yet started ?
Hi all,
My requirement is to run the t-code FMZ1 , but while i am executing this transaction im getting one status messaage as " conversion program RFCONVTP not yet started". then I run that program with out test run, even though I am not able to execute the t-code FMZ1.
please tell me how can i run the program RFCONVTP.
Regards,
There are a lot of SAP notes for this BAPI, and none says "don't use it", so you should be fine. You could send a message to SAP pointing them to the unreleased status.
Thomas
Similar Messages
-
Cache update not yet started In PI 7.1
Hi
Iu2019m using PI 7.1, facing the issue with Cache Update
Under Integration Builder -> Environment -> Cache Notifications
Central Adapter Engine, Mapping Runtime Cache (Central Adapter Engine) both are in gray color status (Cache update not yet started) .
Cache Connectivity Test in RWB
RWB -->Component Monitoring --> Cache Connectivity Test
For both Central Adapter Engine, Mapping Runtime Cache on Central Adapter Engine
Showing the warning
"--Attempt to fetch cache data from Integration Directory not yet started or still in process"_
Please help me out to update the Cache successfully
Thanks
VaddeHi Sekher
Thank you very much for your time,
1 RFC- INTEGRATION_DIRECTORY_HMI is working fine.
2. I du2019t find the com.sap.aii.af.cpa.svc service in NWA ,
3 Under Config Tool
template - Usage_Type_All_in_One - Services - com.sap.aii.af.cpa.svc
"CacheType" has the value "DIRECTORYu201D only
Thanks
Vadde -
when i use scrgadm to add a resource group ,it says "RGM has not yet started".
why?
# scrgadm -a -g oracle-rg -h E4500,b150
RGM has not yet started
# ps -ef |grep rgm
root 348 300 0 17:43:22 ? 0:00 /sbin/sh /etc/rc3.d/S29initrgm start
root 357 348 0 17:43:22 ? 0:00 /usr/cluster/lib/sc/rgmd
root 2111 392 0 19:00:36 pts/2 0:00 grep rgm
# scconf -p
Cluster name: sc_ora
Cluster ID: 0x3E9A1BA2
Cluster install mode: disabled
Cluster private net: 172.16.0.0
Cluster private netmask: 255.255.0.0
Cluster new node authentication: unix
Cluster new node list: <. - Exclude all nodes>
Cluster nodes: E4500 b150
Cluster node name: E4500
Node ID: 1
Node enabled: yes
Node private hostname: clusternode1-priv
Node quorum vote count: 1
Node reservation key: 0x3E9A1BA200000001
Node transport adapters: qfe0
Node transport adapter: qfe0
Adapter enabled: yes
Adapter transport type: dlpi
Adapter property: device_name=qfe
Adapter property: device_instance=0
Adapter property: dlpi_heartbeat_timeout=10000
Adapter property: dlpi_heartbeat_quantum=1000
Adapter property: nw_bandwidth=80
Adapter property: bandwidth=10
Adapter property: netmask=255.255.255.128
Adapter property: ip_address=172.16.0.129
Adapter port names: 0
Adapter port: 0
Port enabled: yes
Cluster node name: b150
Node ID: 2
Node enabled: yes
Node private hostname: clusternode2-priv
Node quorum vote count: 1
Node reservation key: 0x3E9A1BA200000002
Node transport adapters: hme0
Node transport adapter: hme0
Adapter enabled: yes
Adapter transport type: dlpi
Adapter property: device_name=hme
Adapter property: device_instance=0
Adapter property: dlpi_heartbeat_timeout=10000
Adapter property: dlpi_heartbeat_quantum=1000
Adapter property: nw_bandwidth=80
Adapter property: bandwidth=10
Adapter property: netmask=255.255.255.128
Adapter property: ip_address=172.16.0.130
Adapter port names: 0
Adapter port: 0
Port enabled: yes
Cluster transport junctions: switch1
Cluster transport junction: switch1
Junction enabled: yes
Junction type: switch
Junction port names: 1 2
Junction port: 1
Port enabled: yes
Junction port: 2
Port enabled: yes
Cluster transport cables
Endpoint Endpoint State
Transport cable: E4500:qfe0@0 switch1@1 Enabled
Transport cable: b150:hme0@0 switch1@2 Enabled
Quorum devices: d3
Quorum device name: d3
Quorum device votes: 1
Quorum device enabled: yes
Quorum device name: /dev/did/rdsk/d3s2
Quorum device hosts (enabled): E4500 b150
Quorum device hosts (disabled):
# scstat
-- Cluster Nodes --
Node name Status
Cluster node: E4500 Online
Cluster node: b150 Online
-- Cluster Transport Paths --
Endpoint Endpoint Status
Transport path: E4500:qfe0 b150:hme0 Path online
-- Quorum Summary --
Quorum votes possible: 3
Quorum votes needed: 2
Quorum votes present: 3
-- Quorum Votes by Node --
Node Name Present Possible Status
Node votes: E4500 1 1 Online
Node votes: b150 1 1 Online
-- Quorum Votes by Device --
Device Name Present Possible Status Owner
Device votes: /dev/did/rdsk/d3s2 1 1 Online E4500
-- Device Group Servers --
Device Group Primary Secondary
-- Device Group Status --
Device Group Status
## ps -ef |grep rgm
root 348 300 0 17:43:22 ? 0:00:00 /sbin/sh /etc/rc3.d/S29initrgm start...this should not still be running - it shows there is some problem with the
startup of rgm
look for messages of type "INITRGM" in the /var/adm/messages log
Node transport adapters:
: qfe0each node should have at least 2 transport adapters!!!
(plus 1 public interface) -
The ADOBE conversion program is not working.
The ADOBE conversion program is not working, and I purchased a new computer. How do I transfer it?
You do not neet to transfer anything to your new computer.
Only thing you need to do is to download Adobe Reader XI from www.adobe.com if you use our service via Reader rather than web ui at https://cloud.acrobat.com(login (log in with your Adobe ID and password).
Please let me know if you cannot login to the above site.
Thank you.
Hisami -
when I connect my iphone to the iTunes, it said "Apple Mobile Device" service not yet activated, service cannot start?
What does it mean? I connect my iphone to iTunes everynight, only tonight this message pop out?You can try to start the AMDS by going to task manager (ctrl/alt/delete), Choose the services tab and right click on the AMDS and choose start service. This will sometimes work, but usually iTunues needs to be reinstalled. If you reinstall iTunes, follow this KB how to article --> http://support.apple.com/kb/ht1925
-
My windows azure account is not yet started
Hello
hello,
I applied for subscriptions for windows azure free trial account (verified by relative credit card) from my live account and $1.10 has been deducted from account but i do't get my subscriptions yet.
I need this account for Microsoft imagine cup, so i need your help urgent .
It is show this message when i log in to my azure account
We were unable to find any subscriptions associated with your accountHi,
I had this same problem few days back. You will have to first sign out from all Microsoft sites & services completely. (or you can use private/cognicitve browser window)
event better to close the whole browser & tables if you are not sure. and start the browser.
Then give it a try.
If you get the similar error. click sign out on that page which will take you to sign in page.
then try to login again.
If you found this post useful, Please "Mark as Answer" or "Vote as Helpful". Best Regards. -
Meeting Attendees get error message 'Meeting has not yet started'
Hi All
I am able to start a meeting but not having any luck with attendees joining. Have had no problems til a couple of weeks ago? Is it cause I am still running CS4?Uninstall any Intego junk according to its instructions and ensure that all its components have been completely eradicated from your Mac. You may need to download Intego's installer so that you can run its uninstaller.
Intego will make your Mac run very poorly, unacceptably so. Never install such junk on a Mac. -
Pi7.0 cache instance af.xit.tkxit updated status not yet start
dear expert
ERROR com.sap.sld.wd.businesssystem.BusinessSystem:
Log Record Details
#3 08/21/2009 00:58:20.159 [SAPEngine_Application_Thread[impl:3]_28] ERROR com.sap.sld.wd.businesssystem.BusinessSystem: Problem accessing CIM
Thrown:
com.sap.sld.api.wbem.exception.CIMException: CIM_ERR_FAILED: Instance no longer valid: //localhost/sld/active:SAP_XIIntegrationServer.CreationClassName="SAP_XIIntegrationServer",Name="is.00.tkxit"
at com.sap.sld.api.std.impl.BaseSystem.checkValid(BaseSystem.java:792)
at com.sap.sld.api.std.impl.BaseSystem.getProperty(BaseSystem.java:410)
at com.sap.sld.api.std.land.SLD_LogicalApplicationSystem.getName(SLD_LogicalApplicationSystem.java:152)
at com.sap.sld.wd.businesssystem.BusinessSystem.removeXIIntegrationServer(BusinessSystem.java:478)
at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystem.removeXIIntegrationServer(InternalBusinessSystem.java:470)
at com.sap.sld.wd.businesssystem.BusinessSystemMainView.RemoveOk(BusinessSystemMainView.java:450)
at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystemMainView.wdInvokeEventHandler(InternalBusinessSystemMainView.java:477)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.clientserver.event.CustomEventProcessor.handleServerEvent(CustomEventProcessor.java:45)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleServiceEvent(WindowPhaseModel.java:361)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:128)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processPhaseLoop(WebDynproWindow.java:345)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:152)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
help me please
thank you very much
Closedear expert,
the following is the erro message:
Protocol Adapter Engine af.xit.tkxit
Show Detailed Error Message
2009-8-21 2:46:47 - Cache notification from Integration Directory received successfully
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationDirectory, [CreationClassName, SAP_XIIntegrationDirectory, string, Name, directory.xit.tkxit, string], target element type: SAP_XIIntegrationServer)
[Data Evaluation]: GlobalError -
Reset podcast status to not-yet-started
I clicked on a podcast by accident, so it started playing. The blue dot beside it disappeared. Is there a way to reset the status of this podcast so that it is as if I didn't start it? According to the help, such a podcast has a blue dot beside it.
Right-click on the podcast and select 'Mark as New'.
-
Every time I connect my itouch to the computer it comes up with this message does any one know how to solve this because it has got me baffled. Thank you.
Go to the top of this page, click "Support" then type "apple mobile device". You should find some answers.
-
What does that actually mean?
Plain bundle (a single file copy + launch executable)
But it does not run on a client to which it is assigned
SebCould be the content did not upload properly...........
On 1/10/2014 9:26 AM, Sebastian Cerazy wrote:
> Guys, I have a SINGLE server
>
> Seb
>
> "kjhurni" <[email protected]> wrote in message
> news:[email protected]...
>>
>> Sebastian Cerazy;2298104 Wrote:
>>> What does that actually mean?
>>>
>>> Plain bundle (a single file copy + launch executable)
>>>
>>> But it does not run on a client to which it is assigned
>>>
>>> Seb
>>
>> I've seen it happen in 3 scenarios. Regardless, the 3 scenarios have
>> something in common:
>> You need to examine what the CONTENT SERVER(s) are that are assigned to
>> the agent/location in question.
>>
>> If there's only ONE content server assigned, it makes troubleshooting
>> easier.
>>
>> Here's the 3 instances where I've seen this for non-ZPM Bundles:
>>
>> 1) The Bundle replication has not yet started or finished. For
>> example, we have our Primary servers set to replicate every 1 hour, and
>> our satellites replicate every night starting at 8:00 p.m.
>>
>> 2) The Bundle replication THINKS it has finished (shows in the ZCC that
>> it's replicated) but the files aren't there on the server, or aren't
>> there CORRECTLY. On a Satellite server, you can use:
>> zac cvc
>> to verify the content
>> and sometimes I've had to use:
>> zac cchk
>>
>> 3) The agent is pointed to a satellite server for Content, and the
>> xplat agent (Linux) has crashed or not running (there's a bug for this
>> currently in 11.2.4 and lower), and, as a result, the agent cannot
>> connect to the Sat. Content server to fetch the content.
>>
>> --Kevin
>>
>>
>> --
>> The opinions expressed are my own.
>> Check out my OES2 Guides:
>> Installing OES2 SP2:
>> http://www.novell.com/communities/no...allation-guide
>> Upgrading to OES2 with ID Transfer:
>> http://www.novell.com/communities/no...r-id-scenarios
>> GroupWise Migration with OES2 ID Transfer:
>> http://www.novell.com/communities/no...p2-transfer-id
>> ------------------------------------------------------------------------
>> kjhurni's Profile: https://forums.novell.com/member.php?userid=734
>> View this thread: https://forums.novell.com/showthread.php?t=473471
>>
>
> -
Local Currency conversion program(Standard) - Manually starting Fill phase
Hi experts
I am having a problem running the local currency conversion program.
The Analyse phase completed with 3 warnings but can not start the Fill phase automatically . How can we start it off from this stage to the next (fill) stage or what could be the source of the error.
all suggestions will be appreciatedHi,
Try using the FM 'CONVERT_TO_LOCAL_CURRENCY'.
For testing purpose Go to se11 and see the values is TCURR table.
For eg : If you want the exchange rate as M (which is Month Begin Exchnage rate), the date you are passing to the FM should always Begin of the month.
FORM calculate_currency
USING
lv_date LIKE wa_data-fldate "date is needed as on current date should be set exchange rate (be carefull with type i left my original)
lv_foreign_amount LIKE lv_totalprice "number
lv_foreign_currency LIKE wa_data-currency "currency identificator
lv_local_currency TYPE c "currency identificator
CHANGING
lv_local_amount TYPE p. "number
CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
EXPORTING
CLIENT = SY-MANDT
date = lv_date
foreign_amount = lv_foreign_amount
foreign_currency = lv_foreign_currency
local_currency = lv_local_currency
RATE = 0
TYPE_OF_RATE = 'M'
READ_TCURR = 'X'
IMPORTING
EXCHANGE_RATE =
FOREIGN_FACTOR =
local_amount = gv_local_amount
LOCAL_FACTOR =
EXCHANGE_RATEX =
FIXED_RATE =
DERIVED_RATE_TYPE =
EXCEPTIONS
no_rate_found = 1
overflow = 2
no_factors_found = 3
no_spread_found = 4
derived_2_times = 5
OTHERS = 6
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "Calculate_currencytake a look on exceptions which you get after, it might be helpfull
Please reward points if helpful.
Regards
rose -
I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I just purchase my first IMac with lion and I was trying to install a math program I bought 6 years ago. When I went to boot it off the disk while following the program instructions a window popped up with a note pad format with symbols and codes but the program would not download or open. How do I get this program to work? It is a mac compatible program by the way.
Your Mac probably does not know with which application to open the file and is opening a file with a text editor that really needs to be opened by the application itself. Try starting the application first, then use the File > open command to open the file.
As varjak paw comments, there isn't a "winmac" so that's not telling us anything.
Note that it is possible that software purchased 6 years ago may no longer run on your computer. Once we know what it is we can help more. -
Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.
Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
By the way, it might help if you indicated where you are located.
To complain to Apple use http://www.apple.com/feedback/ipad.html
Maybe you are looking for
-
Reminders on iCloud, and iCal on Mac
I'm currently trying to get to grips with iCloud across all my devices, home Macbook (running Mountain Lion) work MacPro (running Lion) and iPhone (iOS6). My problem is with the duplication of events in iCal. I use Reminders as my to do list and I us
-
Have a brand new 4S which is very warm to the touch?
I have just activated a new 4S which is very warm to touch?
-
Hi, There is some problem with our portal while creating JCo Connection. It takes very long time to create new JCo connection on development server . If i create Jco connection of same applicationon on other server(Qlty, prod), it takes very less tim
-
PDF printer: RGB 220dpi scale to 150,845
Since I use the Adobe PDF printer 7, all my RGB grayscale TIF photos from MS WordXP files are changed from 220dpi to 150dpi. The settings in the used profiles are "don't change color photos / grayscale photos", I have no clue where there might be a w
-
Iphoto will not recognize and import photos from camera.
Have a Kodak camera and never had any problems importing pictures from it directly to Iphoto until I upgraded My Imac to 10.6.8 Am using Iphoto 09 version 8.1.2. This is becoming quite a problem after searching for answers and seeing all the posts al