Conversion Request from Labview 3.0x to Labview 8.2 - Attachments: 3 of x

I have a LV3.0 application that reads a rack-mounted SCXI system that monitors analog quantities for a 1985 HVDC converter station.  I would like to decommission the 1980's vintage Macintosh PC, running Labview 3, and move to a more maintainable Windows 7 PC usinbg a USB-to-SCXI interface.  The main reason for doing this is that the Apple dot-matrix printer associate with the Macintaosh PC no longer is working.  However, the floppy-disk drive on the Macintosh PC has now given up, too, but not before I salvaged the VI's via a Mac-to-PC conversion process.  (We have a spare floppy-drive, but that is an E-bay salvaged unit we bought when the other failed about four years ago.)
Thanks in advance for conversion assistance. 
Attachments: 3 of x
Attachments:
4882TMO.VI ‏4 KB
AI Buffer Config.VI ‏19 KB
AI Buffer Read.VI ‏93 KB

Thanks in advance for conversion assistance. 
Attachments: 22-24 of x
Attachments:
Open_Create_Replace_File.VI ‏182 KB
Parse Address String.vi ‏257 KB
platGlob.vi ‏12 KB

Similar Messages

  • Downconvert vi request from Labview 11 to labview 8.6

    Please help me convert the file prepared in Labview 11.0 to the file(vi) that will work in Labview 8.6.
    Quick response is appreciated.
    Attachments:
    dbltomatrix.vi ‏17 KB

    Please read the Announcements section. We have a dedicated forum for this kind of this: http://forums.ni.com/t5/Version-Conversion/bd-p/VersionConversion

  • Conversion software from labview 4.0. to labview 8.5.1

    We have some programs written in Labview 4 that we need to run on Labview 8.5. In the Labview upgrade notes, I see that I have to contact NI for conversion software. How do I access this conversion software?
    Thanks 

    This has been asked now for umpteen no. of times by many people.
    What you can do is either contact NI directly for conversion or post your code here (if they are relatively small) so that someone will convert it for you. FYI, LV 8.5 & above will open VIs only upto version 6.0. It wont open codes developed in previous versions below than that. So, your original older codes need to be opened in some intermediatory LV version between these two, so that they can be opened in LV 8.5.1 or above.
    - Partha
    LabVIEW - Wires that catch bugs!

  • Another Conversion Request - from v9.0 to v8.6

    Hi, could you convert this as well. From version 9.0 to version 8.6. Thank you so much!
    Solved!
    Go to Solution.
    Attachments:
    set_cursor_pos.vi ‏9 KB

    Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    set_cursor_pos.zip ‏4 KB

  • Conversion Request - from v9.0 to v8.6

    Please convert the 2 attached version 9.0 .VI files to version 8.6. Thanks!
    Solved!
    Go to Solution.
    Attachments:
    Fitt's Task_Long-Term_v7.1.3.vi ‏198 KB
    Fitt's Task_Short-Term_v7.1.3.vi ‏103 KB

    Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    8.6.zip ‏127 KB

  • Conversion of VIs from LabView 2013 to 2011

    Hi,
    I would be grateful for conversion of zipped VIs from LabView 2013 to 2011.
    Thank You,
    Michal
    Solved!
    Go to Solution.
    Attachments:
    main VIs.zip ‏38 KB

    Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Attachments:
    main VIs 2011.zip ‏27 KB

  • Conversion from LabVIEW 2011 to 8.2

    Dear All
    Can any body help me to convert the attached file from LabVIEW 2011 to LabVIEW 8.2.
    Kind Regards
    Muhammad Irfan
    Solved!
    Go to Solution.
    Attachments:
    LabVIEW 6281-40 Replace.vi ‏76 KB

    This is what the Version Conversion board is for.  But here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    LabVIEW 6281-40 Replace.vi ‏99 KB

  • Request to downconvert from LabVIEW 8.0 to LabVIEW 7.1

    Hello,
    I'd really appreciate it if someone could downconvert this instrument driver library from LabVIEW 8.0 to LabVIEW 7.1.
    Thank you!
    Brooks
    Attachments:
    hp34970a.llb ‏2094 KB

    Try the Version Conversion Board.  That is what it is there for.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Conversion from LabVIEW 2012 to 8.2

    Dear All
    Can any body help me to convert the attached file from LabVIEW 2012 to LabVIEW 8.2. Please send the file in doc or pdf as well.
    Kind Regards
    Muhammad Irfan
    Solved!
    Go to Solution.
    Attachments:
    PVT - Mathscript Node.vi ‏83 KB

    Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    PVT - Mathscript Node.vi ‏90 KB

  • ODBC from LabVIEW 4.1

    Hi.
    I need to access to odbc database from LabVIEW 4.1. I looked through
    the online reference and found that it looks like that the only way to
    do it is to buy additional pack for accessing the DBases. For me it is
    not the best case, though.
    Is there any other way to work with odbc databases than that?
    Thank you.
    ---Dmitry Rozmanov.

    This was already taken care of here: http://forums.ni.com/t5/Version-Conversion/convert-vi-from-LabVIEW-4-1-to-LabVIEW-2013/td-p/2735335
    For future reference place all of these type of requests in the Version Conversion subforum.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    If someone helped you out, please select their post as the solution and/or give them Kudos!

  • Need to convert to labview 11 from labview 12

    hello
    I need to convert the following Labview 12 VIs to Labview 11.
    thank you in advance
    Attachments:
    QAM Demodulation.vi ‏30 KB
    QAM Modulation.vi ‏30 KB
    rx QAM.vi ‏57 KB

    The conversion was done here: http://forums.ni.com/t5/Version-Conversion/need-to-convert-from-Labview-12-VI-to-Labview-11/m-p/3021...
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Error while runing diadem asynchronous script from labview on dual core processor

    Urgent need of some help / advice here!
    Single core runs fine... dual core produces error: Error in <XYaxis.vbs> (line: 17, column: 1): Error while opening object. The object currently open has no subobjects. Forgotten ObjClose?
    The main software built in labview used for daq and analysis generates a PDF report on completion of a test, utilising diadem. For this I use the diadem express vi in labview to generate a multi page report, whereby I use for loop to iterate an array of channels for each page. This for loop has a shift register too. After each page I run a script to adjust a few parameters like linear/log, begin/end and line thickness using the diadem connectivity tookit. See script below:
    Call GraphObjOpen("2D-Axis1")
    Call GraphObjOpen("2DXAxis8_1")
    D2AxisXDivMode = "linear"
    D2AxisXScaleType = "begin/end manual"
    D2AxisXBegin = 20
    D2AxisXEnd = 20000
    Call GraphObjClose("2DXAxis8_1")
    Call GraphObjOpen("2DYAxis8_1")
    D2AxisYDivMode = "linear"
    D2AxisYScaleType = "complete automatic"
    D2AxisYBegin = 0
    D2AxisYEnd = 0
    Call GraphObjClose("2DYAxis8_1")
    FOR c = 1 TO CurveNoMax
    If D2CurveObj(c) = "" Then Exit For ' c
    Call GraphObjOpen(D2CurveObj(c))
    D2CurveLineWidth = 0.75
    Call GraphObjClose(D2CurveObj(c))
    NEXT ' c
    Call GraphObjClose("2D-Axis1")
    There is also a screenshot of the vi: (script file is generated by the Dscript vi and saved to disk. then path is passed to the diadem script vi.)
    What I find is, after the first report page is complete in diadem the second page ALWAYS shows the error as shown at the top. However, on my P4 laptop with single core (no hyperthreading) its runs FINE EVERY TIME with any given number of channels/pages in the report.
    My current chain of thought is that the superfast dual core is doing something in parallel therefore not waiting for the previous page to complete or finish closing its object!? however, in my for loop I use a shift register as named before, surely this kind of loop cannot be divided over more cores/parallel threads? as it has to wait for the response of the previous.!?!? Im running LV 8.6 on WinXP for this project and I didnt even think multicore processing for for loops is included in this version.
    The other thing is... this script used to run fine on the dual core until I added the last part that uses a for loop to get every line of the graph to be the thinkness I need. Is this for loop the culprit? Can I stop it from executing over multiple cores/threads? I read a post saying that from diadem 8 there was multi core support. this triggered my doubt
    As always any comments are most appreciated
    AL
    :. LV2010 SP1 ... W7 .:
    Solved!
    Go to Solution.

    Hi Al,
    I have a theory, but only you can test it.  In your VI screenshot, you have the boolean input for the DIAdem Execute Script.vi set to asynchronous=TRUE.  My theory says that if you change that boolean (and all others like it) to asynchrous=FALSE that the error will not occur on the multicore computer.  The other thing you could try would be to consolidate all REPORT commands that pertain to one REPORT page into a single ActiveX call to DIAdem.  In the screenshot below you have at least 2 separate VIs calling DIAdem, so that's at least 2 separate ActiveX calls for one REPORT sheet.
    Here's what I think is going on.  On a multicore computer there is the potential for different ActiveX commands from LV to DIAdem to execute on different cores, which may result in a timing problem on the DIAdem side.  DIAdem 11.x and earlier runs exclusively on 1 CPU, so the incoming ActiveX commands should be sequenced correctly by DIAdem's ActiveX to-do list.  Theoretically DIAdem should serialize all the incoming ActiveX commands (regardless of which CPU processed them) in the order that they arrived at the DIAdem ActiveX server(s).  On the sending side, LabVIEW's dataflow execution should theoretically guarantee that all the ActiveX requests are being sent in the correct order.  But it is theoretically possible that the operating system's ActiveX processing queue might not send all the ActiveX commands to DIAdem in the order that it receives them from LabVIEW-- IF YOU'VE SELECTED ASYNCHRONOUS PROCESSING.
    See if these clues help,
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • From Labview 9.0 to Labview 8.2.

    I need a conversion, if possible, from Labview 9.0 to Labview 8.2.
    Thank you for the support
    Attachments:
    Write Std Out with Redirection.vi ‏24 KB

    attached
    WARNING: There is a bug in LabVIEW 8.2 where you cannot use the error cluster to chain together the Call Library Function Nodes. You will need to either create wrapper VIs for each CLFN or you will need to use case structures around each call.
    Attachments:
    Write Std Out with Redirection.vi ‏28 KB

  • Bring Excel 2007 to the front when called from LabView v9 in Windows 7

    I am building a duplicate system using Windows 7, LabView v9 and Excel v2007.  The original system used WinXP, Excel 2007 and LabView v8.6.  The issue is that the original system was able to bring Excel to the front when called from Labview using the property node -application-> visible.  This new configuration runs Excel, loads the data, runs the macros but does not bring Excel to the front.  The icon blinks in the Win7 taskbar and when selected displays over LabView.  If I minimize the Labview window, Excel is there.  This leads me to conclude that Excel is visible, as requested but will not come to the front until selected from the taskbar.  The only differences, besides the versions, is the original system template files used the .xls extension in and was run in Excel in compatible mode.  At the customers request, the new system uses the .xlsm extension on the Excel template files.  I have tried using application.visible = True in the macro as well.  Could be a setting in Labview?  Could be a setting in Excel? Could be .xls vs. .xlsm? Or an issue with Windows 7 and the newer version of Labview. 
    HP workstation - Labview v9 - Windows 7 - Excel 2007 sp2
    Thank you in advance
    Stephen
    Solved!
    Go to Solution.

    I will try the windowstate change.  Were these done in succession? (i.e. property node -> property node -> property node) Or were they done along the way such as call the ActiveX open and a property node then in a worksheet modification area etc. so there was some time between calls? 
    I am not sure about the API since the discussion there is with regard to DDE.  (Taken from the link document:  If you want to call a DLL that contains ActiveX
    objects, use the Automation
    Open VI with the Property
    Node and the Invoke
    Node.).  I am calling Excel as an application not as a library call unless I am mistaken, which I could certainly be.  Are you thinking that once Excel is active through the Automation Open VI that a DLL call to set the application visible would work?  I may be trying this already but in Excel through the use of the macro I call from LabView.  It contains application.visible = True at the beginning before reading files and plotting data.  
    I may try sprinkling Property node with application->visible in various locations in the LabView diagram as I do update cells after the call to the plot macro.  The puzzle for me is the blinking Excel icon in the task bar.  This means active and running but not visible or something wrong as well.  There are a few #VALUE cells if not all test in the system are run.  Again not a problem in Excel 2007-WinXP-LV8.6
    Thank you again one and all.

  • Pass 2D array from LabVIEW to C# problem

    Hi , I have made a dll using .net assembly to use my labview code in c# . I can easily pass string , numerical and 1D arrays from labview to c# and vice versa, but when I want to read back 2D U16 array from Labview in c# I get the following exception although they have exactly the same type (ushort)
    Cannot widen from source type to target type either because the source type is a not a primitive type or the conversion cannot be accomplished.
    Could you please let me know how should I pass 2d array from labview to c#
    Thanks

    If all else fails, you could pass n 1D arrays across and then put the original 2D array back together. That's probably how the computer would do it behind the scenes, anyway.
    Cameron
    To err is human, but to really foul it up requires a computer.
    The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
    Profanity is the one language all programmers know best.
    An expert is someone who has made all the possible mistakes.
    To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
    LabVIEW Unit 1 - Getting Started
    Learn to Use LabVIEW with MyDAQ

Maybe you are looking for

  • Error in maintenance optimizer generating Stack File XML

    Hi all, In step 3 "Download Files" of maintenance optimizer transaction to implement the EHP5 of ERP, In the tab "Log" I see the following error. *Collecting XML adjustment input data done with error or warning. Message no.AGS_MOPZ_PLAN_MSG144* The s

  • Replenishmant storage location in MF60(reservation creation)

    Hello, In REM, we are using MF60 for two step material staging. We have gone for two stage staging process. First shop person will create reservation and then the store person will issue the material against the reservation. Here when the resrvation

  • Web Content Browser

    Hi, I'm new to Web Page Composer and trying to develop my first web page using WPC. Just wonder how can we have more element or icons in the Web Content Browser such as Personal Documents, Public Documents, Common Folders, etc. Currently it has 3 ele

  • Lion and Quicken

    I upgraded to Lion and lost my Quicken program.  I did save info on thumb drive before the download.  Unfortunately the quicken files were saved as qdf files.  I purchased IBank which requests all files as qif.  How do I change the save to qif?

  • IOS 7 Unable to sync reminders

    My wife and I both have Iphone 5's and 2 ipads.  After updating to ios7 were unable to sync the reminders.  We have a grocery list that we share between us and this is important.   Anyone else having this problem.  Ive checked all the settings and ev