Conversion routines do not run for ALV after upgrade
Hi,
We just upgraded from 4.6 to 6.0 and the custom created ALV reports which had fields like MATNR , VBELN , AUFNR now show leading Zeros. It seems the conversion routines are run before the list is displayed.
If we add the REF_FIELD and the table in the Field Catalog, it seems to work, but that would a big change as we would have to manually change all the reports. Any suggestions.
Regards,
SG
Thanks - our ticket should be getting closed out on it (our dba will be updating it), the scheduler has been running reliably since we took the steps in the doc mentioned.
Similar Messages
-
Scheduled jobs do not run as expected after upgrading to 10.2.0.3 or 4
FYI, we've had a ticket open for several days because our scheduled jobs (dbms_scheduler) would no longer run as scheduled after an upgrade to 10.2.0.4 on HPUX, couldn't find the solution by searching in metalink, nor did I find it here or using Google - obviously I wasn't searching correctly. There is a note id that references a set of steps that appears to have resolved our problem. I am putting this note out here so that if you encountered the same difficulty you may come across this note earlier in your troubleshooting efforts rather than later. The full title of the note is: 'Scheduled jobs do not run as expected after upgrading to either 10.2.0.3 or 10.2.0.4'. The Doc ID is: 731678.1.
Thanks - our ticket should be getting closed out on it (our dba will be updating it), the scheduler has been running reliably since we took the steps in the doc mentioned.
-
App updates not running on ipad2 after upgrade to iOS 5 - anybody know or a solution or have same problem?
Operator error! The mute button was on.
-
Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ?????????????????
1st problem see http://kb.mozillazine.org/Firewalls
2nd problem, to close Firefox properly use File > Exit
:not with the [x] in upper right corner which close window
:see http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit
:if restarting use "Restartless Restart" extension as mentioned there.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small> -
I can not run Adobe reader after I installed it. I said can only run an instance.
Hi,
Can you share the screenshot of the error message.
Please use the insert image button on the tool bar to insert the screenshot.
If you cannot share the screenshot, please provide the exact error message with us.
Thanks
~ Aditya Kalania -
Default logic not running for a particular team
Hello,
I have a financial consolidation application in BPC 7.5 NW. We have a particular problem, whereby the default logic is not running for one team when they are uploading data. The error message is "Error running default logic. Error converting records. The root element is missing".
Users in other teams are not affected by this and they are able to upload data successfully without any problems and are able to view converted records.
Can someone please explain how this is possible in BPC?
Also, our development consultant created 2 copies of the default logic in the Finance application. In the admin consol, one is called "Default.LGF" and the other one "DEF BU 9 Mar 2011.LGF". Can anyone kindly explain whether it is possible to have 2 copies of the default logic and if so, how does BPC decide which one to run.
In both versions of the default logic, the following code is inserted for FX translation:
// Query 6 - Perform currency translations - run currency translation stored procedure
*XDIM_MEMBERSET CATEGORY=%CATEGORY_SET%
*XDIM_MEMBERSET TIME=%TIME_SET%
*XDIM_MEMBERSET ENTITY=%ENTITY_SET%
*XDIM_MEMBERSET MEASURES=YTD
*RUN_PROGRAM CURR_CONVERSION
CATEGORY = %CATEGORY_SET%
CURRENCY = GBP
TID_RA = %TIME_SET%
RATEENTITY = GLOBAL
OTHER = [ENTITY = %ENTITY_SET%]
*ENDRUN_PROGRAM
*COMMIT
Thank you very much.
Edited by: kashifmehmood on Jun 17, 2011 4:12 PMHi
1.Users in other teams are not affected by this and they are able to upload data successfully without any problems and are able to view converted records.
One of the reason may be there are some secured dimensions involved like Entity, which is not assigned to the team. Refer to the HTG document below:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207995e8-deb8-2d10-3cb9-8ab146c95a09?quicklink=index&overridelayout=true
2.Also, our development consultant created 2 copies of the default logic in the Finance application. In the admin consol, one is called "Default.LGF" and the other one "DEF BU 9 Mar 2011.LGF". Can anyone kindly explain whether it is possible to have 2 copies of the default logic and if so, how does BPC decide which one to run.
In my opinion your consultant created "DEF BU 9 Mar 2011.LGF" and maintained the logic in that logic file. To run the logic by default, he has to call the earlier logic file in DEFAULT.LGF.
*INCLUDE DEF BU 9 Mar 2011.LGF ( Nothing wrong in keeping the entire logic, but it is not required)
Logic file ""DEF BU 9 Mar 2011.LGF" can be called by DM packages.
Thanks -
Analysis Engine Not running for IPS in AIPSSM Module
Hi all,
The Analysis Engine is not running for IPS module in AIPSSM Module. Please let me know how can i resolve this issue and get the analysis engine of IPS to running status.
Regards
KiranHi Kiran,
Ideally, what you can do is to remove the configuration on the ASA that sends traffic to IPS.
The crash in sensorapp or analysis engine might be traffic, configuration related.
We can try to reboot the IPS with no load on it by stopping sending traffic to it.
You can remove the IPS policy from the ASA configuration.
http://tools.cisco.com/squish/2f7A3
What this will do is stop ASA from sending any traffic to IPS.
Now do the hw-module module 1 reset command.
See if the IPS module comes back up.
If that also fails, then you can re-image the module.
This will however erase the configuration on the module.
The re-image procedure for SSM module:
http://tools.cisco.com/squish/ee66a
Hope this helps.
Sid -
I am running very slowly after upgrading to ver 10.9.1 on my macbook pro. Can anyone help me to solve this problem. I am including the results from running Etresoft.
Hardware Information:
MacBook Pro (15-inch, Mid 2010)
MacBook Pro - model: MacBookPro6,2
1 2.53 GHz Intel Core i5 CPU: 2 cores
8 GB RAM
Video Information:
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 256 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
Startup Items:
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 0:53:49
Disk Information:
Hitachi HTS545050B9SA02 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (200.83 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information:
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Internal Memory Card Reader
Western Digital My Passport 071A 1 TB
EFI (disk1s1) <not mounted>: 209.7 MB
Backup (disk1s2) /Volumes/Backup: 999.83 GB (622.71 GB free)
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.kodak.aio.kcpconnector.plist
[loaded] com.leapfrog.connect.shell.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.sonos.smbbump.plist
Launch Agents:
[loaded] com.kodak.BonjourAgent.plist
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist
[loaded] com.google.keystone.agent.plist
[loaded] com.kodak.KODAK AiO Firmware Updater.plist
[loaded] com.kodak.KODAK AiO Software Updater.plist
[loaded] com.kodak.StatisticCollection.plist
[loaded] com.spotify.webhelper.plist
[loaded] uk.co.markallan.clamxav.freshclam.plist
User Login Items:
Monitor
ScanSnap Manager
Evernote
Dropbox
AdobeResourceSynchronizer
3rd Party Preference Panes:
Flash Player
Growl
Internet Plug-ins::
Flip4Mac WMV Plugin: Version: 2.3.8.1
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.8
AdobePDFViewer: Version: 10.1.8
Flash Player: Version: 11.9.900.170 - SDK 10.6
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
Silverlight: Version: 4.0.51204.0
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User Internet Plug-ins::
Google Earth Web Plug-in: Version: 7.1
Dashlane: Version: Dashlane 1.0.0 - SDK 10.7
Bad Fonts:
None
Old applications:
AiOFirmwareUpdater: Version: 7.7 - SDK 10.5
/Library/Printers/Kodak/AiO_Printers/AiOFirmwareUpdater.app
Install Spotify: Version: 1.0 - SDK 10.5
/Users/jimschindler/Downloads/Install Spotify.app
KODAK AiO Home Center: Version: 7.7.3 - SDK 10.5
/Library/Printers/Kodak/AiO_Printers/KODAK AiO Home Center.app
KODAK AiO Scan: Version: 7.7.3 - SDK 10.5
/Library/Printers/Kodak/AiO_Printers/KODAK AiO Scan.app
KODAK AiO Software Updater: Version: 7.7 - SDK 10.5
/Library/Printers/Kodak/AiO_Printers/KODAK AiO Software Updater.app
KODAK AiO Uninstall: Version: 7.7.3 - SDK 10.5
/Library/Printers/Kodak/AiO_Printers/KODAK AiO Uninstall.app
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Document Connection.app
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
Microsoft Excel: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Excel.app
Microsoft Graph: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Graph.app
Microsoft Language Register: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
Microsoft Outlook: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Outlook.app
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft PowerPoint.app
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
Microsoft Word: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Word.app
My Day: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/My Day.app
Open XML for Excel: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Open XML for Excel.app
Registration: Version: 7.7.3 - SDK 10.5
/Library/Printers/Kodak/AiO_Printers/Registration.app
Solver: Version: 1.0 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
Spotify: Version: 0.8.4.124.ga3559d86 - SDK 10.5
/Applications/Spotify.app
SyncServicesAgent: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 464.96 GB Disk used: 277.92 GB
Destinations:
Backup [Local] (Last used)
Total size: 931.17 GB
Total number of backups: 85
Oldest backup: 2013-02-13 18:40:47 +0000
Last backup: 2013-12-31 17:59:26 +0000
Size of backup disk: Adequate
Backup size 931.17 GB > (Disk used 277.92 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
29% Mail
3% WindowServer
2% mtmd
1% EtreCheck
0% NETGEARGenieDaemon
Top Processes by Memory:
410 MB mds_stores
238 MB Evernote
229 MB Mail
147 MB iBank
123 MB WindowServer
Virtual Memory Statistics:
3.36 GB Free RAM
2.92 GB Active RAM
621 MB Inactive RAM
1.11 GB Wired RAM
1.67 GB Page-ins
0 B Page-outsThings You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to: OS X Maintenance - MacAttorney;
The X Lab: The X-FAQs;
The Safe Mac » Mac Performance Guide;
The Safe Mac » The myth of the dirty Mac;
Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
used to manage backups and to restore backups. Time Machine
requires a backup drive that is at least twice the capacity of the
drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file. -
MacBook Pro mid-2012 running very slowly after upgrade to Yosemite
Problem description:
MacBook Pro mid-2012 - installed Yosemite, and the system now crawls. Webpages have very delayed responses, can take 30+ seconds to react to typing or selection. I turned off FileVault, that did not appear to help. Emptied the trash, removed some obsolete fonts. Any help for what else to try would be much appreciated.
EtreCheck version: 2.0.11 (98)
Report generated November 30, 2014 at 4:10:51 PM CST
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
DELL 1901FP 1280 x 1024 @ 60 Hz
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 16:36:35
Disk Information: ℹ️
APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
disk0s2 (disk0s2) <not mounted> : 749.30 GB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Western Digital My Book 640.14 GB
S.M.A.R.T. Status: Verified
My Book (disk3s1) /Volumes/My Book : 640.13 GB (2.29 GB free)
HP Officejet J6400 series
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Toshiba External USB 3.0 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
Time Machine Backups (disk2s2) /Volumes/Time Machine Backups : 2.00 TB (544.67 GB free)
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. iPhone
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Boom.app
[loaded] com.globaldelight.driver.BoomDevice (1.3 - SDK 10.9) Support
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.roxio.TDIXController (1.7) Support
/Applications/VMware Fusion.app
[not loaded] com.vmware.kext.vmci (90.4.19) Support
[not loaded] com.vmware.kext.vmioplug.10.1.26 (10.1.26) Support
[not loaded] com.vmware.kext.vmnet (0143.58.62) Support
[not loaded] com.vmware.kext.vmx86 (0143.58.62) Support
[not loaded] com.vmware.kext.vsockets (90.4.24) Support
/System/Library/Extensions
[not loaded] com.SiliconImage.driver.Si3132r5 (1.5.16) Support
[not loaded] com.beceem.BeceemAppleWiMAXAdapter (5.2.56d16) Support
[not loaded] com.devguru.driver.DIFMCDFree (1.1.0) Support
[not loaded] com.devguru.driver.DIFMSerial (1.1.0) Support
[not loaded] com.fklt.driver (1.8.0) Support
[not loaded] com.novatelwireless.driver.3G (2.2.8) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.2) Support
[not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.6) Support
[not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.6) Support
[not loaded] com.wacom.kext.wacomtablet (6.1.5) Support
[loaded] zoom.us.ZoomAudioDevice (1.1 - SDK 10.8) Support
/System/Library/Extensions/NovatelWireless3G.kext/Contents/Plugins
[not loaded] com.novatelwireless.driver.3GData (2.2.8) Support
/Users/[redacted]/Downloads/Transmit.app
[not loaded] com.panic.TransmitDisk.transmitdiskfs (4.0.0 - SDK 10.6) Support
Startup Items: ℹ️
ProTec6: Path: /Library/StartupItems/ProTec6
SATARaid5Daemon: Path: /Library/StartupItems/SATARaid5Daemon
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[failed] com.apple.bird.plist
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cloudd.plist
[failed] com.apple.cmfsyncagent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.icloud.fmfd.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.recentsd.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
[failed] com.apple.xpc.loginitemregisterd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.awdd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.installd.plist
[failed] com.apple.MobileFileIntegrity.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.periodic-daily.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.tccd.system.plist
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist
Launch Agents: ℹ️
[invalid?] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.adobe.CS5ServiceManager.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.wacom.wacomtablet.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.icyblaze.iDocumentHelper.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.roamingclient.cell.mac.roamingclient.plist Support
[not loaded] com.sierrawireless.SierraReset.plist Support
[running] com.sierrawireless.SWoCMon.plist Support
[invalid?] com.sierrawireless.SWoCTool.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
User Launch Agents: ℹ️
[invalid?] com.adobe.AAM.Updater-1.0.plist Support
[invalid?] com.adobe.ARM.[...].plist Support
[invalid?] com.adobe.ARM.[...].plist Support
[invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
[loaded] com.koingosw.MacCleanse4Helper.Reminder.plist Support
[loaded] com.koingosw.MacCleanse4Helper.TrashWatcher.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
Boom Application (/Applications/Boom.app)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
VMware Fusion Helper UNKNOWN (missing value)
Reminders Application (/Applications/Reminders.app)
VMware Fusion Start Menu Application (/Applications/VMware Fusion.app/Contents/Library/VMware Fusion Start Menu.app)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
Box Sync Application (/Applications/Box Sync.app)
Dropbox 3 Application (/Applications/Dropbox 3.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 60 Check version
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
WacomNetscape: Version: 1.1.0-5 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.0.0.126 - SDK 10.8 Support
WacomSafari: Version: 1.1.0-5 Support
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
CouponPrinter-FireFox_v2: Version: Version 1.1.7 - SDK 10.5 Support
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
DirectorShockwave: Version: 11.6.5r635 Support
User Internet Plug-ins: ℹ️
WebEx64: Version: 1.0 - SDK 10.6 Support
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
Google Earth Web Plug-in: Version: 7.1 Support
ZoomUsPlugIn: Version: ZoomBundleVersionNumber - SDK 10.9 Support
Safari Extensions: ℹ️
Omnibar
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
MacFUSE Support
NTFS-3G Support
Tuxera NTFS Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Destinations:
Time Machine Backups [Local]
Total size: 2.00 TB
Total number of backups: 64
Oldest backup: 2013-11-30 08:18:51 +0000
Last backup: 2014-11-30 05:20:09 +0000
Size of backup disk: Excellent
Backup size 2.00 TB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
66% backupd
22% mtmfs
9% Box Sync
3% WindowServer
3% iTunes
Top Processes by Memory: ℹ️
735 MB backupd
129 MB Google Chrome
86 MB mds_stores
77 MB iTunes
69 MB firefox
Virtual Memory Information: ℹ️
28 MB Free RAM
1.65 GB Active RAM
1.64 GB Inactive RAM
1.28 GB Wired RAM
22.18 GB Page-ins
204 MB Page-outsMy apologies - this post was duplicated inadvertently. Please use: MacBook Pro mid-2012 running very slowly after upgrade to Yosemite
Thanks! -
My macbook pro is running really slow after upgrade to Mavericks
my macbook pro is running really slow after upgrading to Mavericks....any ideas?
OS X Mavericks: If your Mac runs slowly
The above link is not very useful, so if it doesn't help read on.
There are many potential reasons that a Mac may be running slower than expected, but more information is required to begin troubleshooting, much more.
Back up your documents and everything else important to you before proceeding. It is premature to conclude your hard disk is failing, but the symptoms you describe may presage an impending disk failure, and you should have backups anyway.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting:
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
http://www.etresoft.com/etrecheck
Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial. -
Yosemite does not recognize HP printer after upgrade. I can print from my iPhone, but not my 13" Macbook Air (2013)
Are others having the same problems?Try this. Worked for me.
- turn off your router
- turn off you Mac's after removing all available printers
- turn off all iDevices
- do a factory reset of your printer remove all cables min. 30 sec.
- turn on your router first
- ran the network set up wizard
- give your printer also a new name like "DeskJet 2015"
Something which you don't have used before.
- turn on your Mac's and add your printer
- turn on your iDevices at least.
Should work after these steps.
It worked for me including all iDevices.
iOS and Yosemite -
My other mail boxes are not visible in mail after upgrading to Mountain Lion
my other mail boxes are not visible in mail after upgrading to Mountain Lion
In the mailbox panel move your cursor slowly down the right hand side . Should reveal show and hide.
-
Photo library does not sync in iOS4 after upgrade in 3GS
Hi all,
Photo library does not sync in iOS4 after upgrade in 3GS.
Anyone having such problems?Just did. Uncheck sync photo check box and sync. Then check sync photo check box and sync. Solved.
-
Duplicate emails on outlook for mac after upgrading to mavericks
I was getting duplicate emails on my outlook for mac after upgrading to mavericks
After reading several websites, I realise this is a common problem.
some people suggesting checking " prevent app nap"
this seemed to work for a while, but is now back again
it is very difficult to handle, with hundreds of emails downloading each time i log in
regards
seemaTry looking/posting here.
Microsoft Support – Office for Mac
Microsoft Support – Office for Mac (2) -
HP Compaq CQ60-215dx: sound will not switch to headphones after upgrade to Win Vista 64bit Ultimate
what can I do?Uninstall the current audio driver and install it again.
other option is trying driver from microsoft update.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD
Maybe you are looking for
-
Help Needed in reporting structure OM
hi experts I am a certified Fresher in SAP i am doing practices with IDES I created an org unit and its sub units and created positions also ..i want to connect the positions of the parent node and subnode in reporting structure O head unit
-
I wish to be able to sequentially number squares in a grid created by Illustrator 11.0.0 I would like to place the first number in, and the rest will follow. James
-
Recently I've been thrust (kicking and screaming) into a role of DBA. My supervisor has put me through the Oracle Sys Admin Workshops I&II, but that is a starting point; it seemed that many of the features that were touched upon are not being used in
-
Checkbox change does not dirty transaction?
I have defined a messageCheckBox in an advanced table. The EO and VO point to a database column rejected_flag. The value is 'Y' or Null. When I uncheck or check this value then attempt to commit inside my AM, nothing happens. The debugger shows me th
-
Cannot disable "display in browser with acrobat" Mac Os X Lion
Hi I'm having trouble reading PDFs on safari(5.1.1): displayed message : "Missing Plug-In". I did a little bit of web browsing to find a solution and apparently you recommend to disable "Display PDF in browser using adobe". in the preference of acro