Conversion sapscript to smartform

Hi,
I have managed to convert my sapscript to smartfiorm, but my question is about the print program of the sapscript.
Is it possible to convert it also or i must to change it maually??
If i must to change manually, what kind of change are to be done to convert this print program??
I have cheched the other thread but no really answer of this question.
Tanks a lot

Hi,
u have to make a few changes in ur smartform print program yar. u need not to change the whole code but replace the statements of start_form,open_form,write_form,end_form,close_form. by the following code.
u have used following stmt.
CALL FUNCTION '/1BCDWB/SF00000001'
but replace it by following code.
DATA: gv_fm_name TYPE rs38l_fnam, "DV1K909057 PRASADDX
gv_formname TYPE tdsfname. "DV1K909057 PRASADDX
Calling the layout set
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = gv_formname
IMPORTING
fm_name = gv_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
PERFORM protocol_update.
ENDIF.
IF gv_fm_name IS NOT INITIAL.
Below function module is used to show the Smart form
CALL FUNCTION gv_fm_name
also understand the concept by checking the following link.hope this works helpful
Re: hi smart forms
Message was edited by:
Durgaprasad Kare

Similar Messages

Conversion sapscript to smartforms

hello to all sap lover
i want to know wether sapscript form can be use in smartforms without changing the driver program .
regards
rakesh singh

Hi,
check the link below it provides steps to convert sap scripts to smartforms
http://www.ficoexpertonline.com/downloads/Iyer_SmartForms.pdf
Cheers,
Vasanth

What SAP recommends in ECC 6. Either SAPSCRIPT or SMARTFORMS?

Hi all,
I want to know, what is the SAP's recommendation in ECC 6.0, whether to use sapscripts or smartforms for the important form print outs like purchase order, quotation, GR, GI, invoice, delivery note.
I knew that in ECC 6.0, for some cases, there are both sapscript and smartforms available, for example Purchase order, Delivery note, invoice etc. In this case what is the SAP's recommendation? to use sapscripts or smartforms??
I heard that SAP does recommend.
Awaiting your reply,
Balaji

Hi
These are few lines from sap help:
Smart Forms replace SAPscript forms. SAPscript forms will still be supported in the future; you can use them without making any changes for years to come. You can even use SAPscript texts in the Smart Forms.
Migration of SAPscript forms into Smart Forms is supported.
Even go through this link :
http://help.sap.com/saphelp_nw70/helpdata/EN/a5/de6838abce021ae10000009b38f842/content.htm
[Advantages of using smartforms|http://saplab.blogspot.com/2007/09/advantages-of-sap-smart-forms.html]
Regards,
Sravanthi

Convert Sapscript to smartform

Hello,
I have to convert Sapscript to smartform ,to do that I have migrated sapscript to smartform and copied the standard driver program to Z program. Is there any way to get all interface parameters automatically without looking into each and every line in program to get the interface parameters?
Regards,
Kangarun.

I would expect to obtain this information by looking at the SmartForms design. I would assume that you're sending a table of variables for your main window and perhaps a structure if there are additional data needs in other secondary windows. So I would look at where the variables are used and create structures and table as needed for the windows.

ADOBE FORM instead of SAPSCRIPT or SMARTFORM

Have anyone used ADOBE FORM instead of using sapscript or smartform and assigned to Output types in NACE tcode?
If so, please give details for the same.

If you are looking for documents on Adobe, check the link -
Re: adobe forms
Otherwise whatever form you want just check for its alternative in ADOBE at SAP Market place and use it.
Regards,
Amit

Migrate PO output from Sapscript to Smartform

Hi,
I'll be migrating ZZMEDRUCK (customized copy of the standard form)that is in sapscript to smartform. I'll be doing this manually since some of the layout/format was changed by the user. Now do i have to create a new print program aside from the ZZSAPFM06P so that it will call the new smartform that i will make? Do i have to create a new output type? Or i dont have to do this and just change the configuration in M/34?
Thanks a lot.

TCode smartforms--> Utilities --> Migrate SAPScript form
This will copy hte SAP Script form into smart forms.
But this will not solve the purpose.
YOu will have to map the print program accordingly.
Hope this helps.
Please reward if useful
thnx

Sapscripts and smartforms

Hi,
Please tell me how to do language translations in sapscripts and smartforms.
I want to to each form in 12 languages.
Please help me.
Thanks,
Ravi

Hi
You can assign the language directly by trx SE71 fot sapscript and SMARTFORMS for sm.
In both trx you can see the section LANGUAGE ATTRIBUTES
Here you can create a version of your form for all language you need.
But all these versions'll be as original, so you need to change all texts you've inserted, i.e you have to translate all texts.
For SAPSCRIPT you can do it by SE71 because you can choose the language (so the version) of the sapscript you want to translate, but for the SAMRTFORMS I believe you can only use trx SE63.
Max

Plm in migrating sapscript to smartform

hi gurus,
i can migrate the sapscript to smartforms through t.code smartforms -->define the smart form name -->utilites(menu) -->migration -->import sap script form, then save after that if u go for syntax check it shows the somany syntax errore saying that 'x' is not defined or something is not defined.
do i have any other way to migrate sapscript to smartform to avoid these(above mentioned) sytax errors?
waiting for reply,
seshu.m.

hi,
pls refer to this sdn thread.
https://forums.sdn.sap.com/click.jspa?searchID=286390&messageID=2667564

SAPScript or SMARTFORM for Purchage Requisition and Program in MM?

Dear Abapers,
Could you please tell me whether SAP Provided any SAPScript or SMARTFORM for Purchage Requisition form and Program in MM?
Thanks in advance.
Sekhar

Hi Chandra sekar
MEDRUCK this is the standard script and
SAPFM06P driver program for all type of PO.
If you want to know this... check here...
Goto NACE T-code
Select EF Purchase Order,
then click output types button in toolbar,
select NEU Purchase order ,
then doubleclick Processing routines folder in left side,
thn there u can find the details of PO related script forms and driver programs.
Thanx
Bgan.

Differnce between SapScript And Smartform

hi All,
Can anyone tell me the difference between sapscript and smartforms.Which we have to use
Points rewarded for answer
Harpreet

Hi harpreet,
1. Can anyone tell me the difference between sapscript and smartforms
some practical differences are :
*----
One main difference which is
visibility in the report is TABLES
(in sapscript we cannot design MATRIX like tables,
having grid lines,
but in smartforms, it is much possible to
design tables, having grid lines, color just
like excel table)
a) sapscript requires
 - driver program (se38 program)
 - layout (se71 layout)
 smartforms just require
 smartform,
(and a program is just required for
 selection screen purpose)
b) the logic of printing (ie. sequence, flow)
 is CONTROLLED BY drier program,
 in case of sapscript.
where as in smartform, it is inbuilt using TABLES element.
c) In sapscript we cannot write our own logic for printing.
 where as in smartform,
we can write our own logic for pritning.
(we can even write SELECT Statements, DATA statements,
 and many program lines + logic to suit our requirements)
2 Which we have to use
If we are copying some standard sapscript,
then we have to go for sapscript only.
We can use both. but practically smartforms is easier to
develop.
regards,
amit m.

CMR - SAPscript or SMARTFORM

Hi,
I need to develope a CMR(International Consignment note). I'm looking for standard sapscript or smartform and print programs, if available. Can anyone shed some light on this CMR form. Will appreciate the responses with points. Thanks.

Hi Raju,
There is a standard form and print program:
Form: LE_SHIPMENT_CMR2
Program: RVADTR00
Regards,
John.

Application form EFRM : from Sapscript to Smartform

Dear all,
I want to link an existing application form with Sapscript (Trans. EFRM) to a Smatform.
(So, I want to use my EFRM with a Smartform instead of a Sapscript)
Is it possible... (I don't want to copy manually my EFRM ;o)
Nicolas

Snif ... it's not possible. Aaaaaaaaaaaah
See documentation of data element EFG_DTE_FORMTYPE
Type of Application Form
States whether the form is an application form to be prepared by a SAPscript or SmartForm.
Use
The form type is assigned when you create the application form and you cannot change it.

Difference between Sapscripts and Smartforms

Hi
I need to create a form for print it in some predefined furmulary for the user signs it , something like a payment receipt.
Wich tool should i use, a Sapscript or Smartform, wath's the diffrerence between these two tools ?
Thanks
Frank

Hi,
SAP Scripts is the old tool and SMART Form is comparatively new tool to develop and print business documents.
SMART Forms are more GUI oreiented and you can do lot of things just by dragging and dropping. SAP Scripts are more code oreiented.Practically smartforms is easier to develop when compared with SAPscript.
Differences :
1. Sapscript is Client dependent Smartform is Client independent.
2. Multiple page formats are possible in smartforms which is not the case in SAPScripts.
3. It is possible to a smartform without MAIN Window.
4. Labels cannot be created in smartforms.
5. It is possible to have a smartform without a main window .
6. In sapscript we cannot write our own logic for printing where as in smartform, we can write our own logic for pritning
7. Sapscript requires a driver program (se38 program) and layout (se71 layout) where as Smartforms can be run independently without a driver program.
8. In sapscript we cannot design matrix like tables,having grid lines, but in smartforms, it is much possible to design tables, having grid lines, color etc. just like excel table.
9.Smartforms generates a function module when activated.
Regards,
V Joshi.

Difference between SAPScript and Smartforms

Hi all,
Can any body tell me, which of these SAPScript and Smartforms are client independent or client dependent and why?
Thanks in advance....
Sri.

Hi Sri,
SAPScript is client dependent and Smartform is client independent.
So you need to transport the SAPScript from the development client to test client if both are in the same system.
Because Smartform is client independent it will behave like report program.
Thanks
Vinod

Docking Control at SAPScript or Smartforms Preview Screen

Hi Expert,
    How to implelment the Docking Contorl at SAPScript or Smartforms Preview Screen.
    As we know, When SAPScript or Smartforms Preview is a full screen to display. my requriment is Split the screen to add own functional on the letf, like Docking Contorl eg. Navigation Tree.
    i already have a cut screen, but i don't know how to implement it.
    Thanks!

Hi All,
   Docking Control need including in all PBO, can any object can handle standard screen event?

Conversion sapscript to smartform

Similar Messages

Maybe you are looking for