Conversion to JPG to Dark and Oversaturated

LR2.2 I converted a batch of raw to high quality (100) JPG with Prophoto RGB to use in Proshow gold. Many of the images are dark and over saturated. Both monitors have been calibrated. Suggestions? Even bringing the new JPG's into another computer LR2.2 does not help.

>However, even when opening these files on another computer in LR2 they also appear dark and oversaturated. When I convert to JPG should we only use sRGB?
That's not good. If both machines are correctly calibrated and profiled, they should look identical. LR color manages correctly and will use embedded profiles correctly My guess is your monitor calibration on one of the machines is bad.

Similar Messages

Help! Images in Aperture are dark and oversaturated...

I just got a new MacBook Pro, so I decided to download the Aperture demo to give it a try. I have been working with Lightroom and wanted to compare the two.
So I imported my first folder of images from some conference events I shot. My first impression was that images appeared a bit dark, contrasty and oversaturated, but I figured that was probably a result of underexposure, since I didn't have a lot of light to work with, or possibly from working with flash in dark rooms.
I went through and opened up all the photos and pulled-down highlights and did color-correction (flesh tones were a bit red). Then I uploaded photos to SmugMug... imagine my surprise to see everything appear flat and light and undersaturated. I couldn't figure it out... I looked through Aperture for possible explanations... proofing wasn't on so that wasn't it. Exported images were given sRGB profile (as opposed to Adobe RGB). I checked them in both Safari and Firefox... same results. Then I went back to the originals and opened them in Preview... they were lighter and less-contrasty than Aperture showed them to be. They looked like they should have looked. (By the way, I am working with JPEGs taken in the sRGB color space.)
So what happened in Aperture? Did something happen on import? I have searched all over the internet and can't seem to find anyone else having this same problem.
Help!
-Erin

Okay, may have posted prematurely... images look the same in Aperture as they do in Photoshop and Lightroom. So it is something weird with how they display in Preview and online...
Grrrr! I hate this color management crap!

Epson R300 prints photos very dark and oversaturated

My Epson R300 recently began printing photos much darker and heavily saturated relative to what I see on my monitor. It seems to print ok directly from a CompactFlash. Photos I printed in the past no longer print good. I tried different programs (iPhoto and Photoshop) and print settings. I replaced all cartridges and reset the driver using Print Setup Utility. Any idea what I can try? Thanks.

Have you checked that the ColorSync profiles are OK,
and have not been changed? Use the ColorSync Utility
to check them.
This appears to be a printer problem and not a setup issue. The printer worked good for nearly 2 years. The color isn't just a little off. All colors are very dark like too much ink is being delivered to the paper.
There is a definite red cast to whites in photos. Printing directly from a CF card (bypassing my computer) shows the same problem. I deleted and reinstalled the drivers. Tried all of the various settings. With/without Colorsync, printer color vs photoshop color. Tried iPhoto vs Preview vs Photoshop. Epson Print vs Gimp Print. Replaced all cartiridges. Used different paper types (Glossy Photo, Matte). Very frustrating!
Is 2 years the lifetime of an inkjet printer?

Why do exported JPGs appear darker than the processed RAW in the LR3 Development module?

I have scoured the forums with this question, and I have seen plenty of suggestions about color space and monitor calibration. However, I never seem to find that the issue gets resolved in the forums.
I am using Lightroom 3, and I am exporting to JPG using sRGB. I have noticed that the JPGs appear darker and the prints are also darker. I am using the same monitor to process in LR and to view the exported JPG. Why don't the images look the same, or at least similar? The difference is pretty huge.

rasu wrote:
… What do you mean by export in an mp4 wrapper? Do you mean export it as an mp4 format instead of H264?? …
no, exactly I did NOT meant that.
that's why I phrased 'wrapper':
a bit confusing, but there's mpeg4, the codec, and there's mp4 the wrapper or media-container:
• use your .mov you have already exported, which has the right colors.
• download/install the free tool Mpeg Streamclip
• open your mov, go straight to 'save as' and choose from drop down mp4
• save and upload that mp4 for comparison to Vimeo
• (tell us, wether you notice any difference, as said, just an assumption)
What will that do?
your h264 encoded material is actually in a .mov-wrapper
Streamclip unwraps that, and puts it into a .mp4-wrapper
this does NOT encode/transcode/affect your h264 material!
it just changes the box, not the chocolate!
What's NOT working is changing the suffix in a Finder operation - that does NOT affect the 'atoms' of the wrapper = a re-named mp4 will be 'noticed' by many programs/players as a mov anyhow! You HAVE to go the 'long' way with Streamclip - due to the simple re-packing operation, that process needs only seconds
I'm using this process to 'convert' my FCPX/iMovie .mov-exports to a readable format for my son's Playstation3 ... mov is a nogo, re-named suffix is a nogo. only re-wrapping to .mp4 works. excellent.
... but, as mentioned, I do care very little about gamma and luma as an hobbyist, my 'products' are under-exposured and veeery colorful anyhow

Images become dark and saturated Photoshop JPEG

So I have noticed several people having this problem, and the solutions that work for them don't seem to work for me!
I start in Camera Raw 8.0, then move to photoshop to crop and tweak a little bit more, then when I save to JPEG and view in windows photo viewer or other medium, the photo is dark and overly saturated. I understand that photoshop is a color mangaged space, and that most other programs are not, but I still can't figure out how to make what I see in photoshop translate to the JPEG image. These will eventually be used on a website and I need everything to look as professional as possible. The image on the right is really dark, especially on the front lawn and porch.
Here are my color settings:
If anyone can help, it would be greatly appreciated.

I suspect that when you're seeing your images not looking right you're viewing them through an incorrectly or incompletely color-managed combination of software and settings. Note that Internet Explorer, while it does read image color profiles, can ONLY show you proper color if your monitors are set to display the sRGB IEC61966-2.1 color space accurately. It makes the (incorrect) assumption that all monitors are sRGB. I believe Windows Photo Viewer only does proper color-management if set to display in a window, not full-screen.
If you're wanting to publish on the web, one generally accepted "least of evils" method is to publish the images with a profile and in the sRGB IEC61966-2.1 color space. At least that way people with "standard gamut" monitors will see them with similar to accurate colors, and folks with properly color-managed setups will see them accurately. Firefox and Safari do NOT assume your monitor is sRGB, and both use the image and monitor color-profiles during image display.
In the bottom-center of Camera Raw is what looks like a link for setting workflow options. If you click it, it will allow you to set Camera Raw to open your images into any of several profiles. As I recall, the out-of-box default is Adobe RGB. You *could* consider converting your images to the sRGB color space directly, then whenever you save them they'll be in the color-space that's more likely to be seen properly. Or you could open them into a wider gamut color space (as they are by default), then Convert them (your last dialog above) to the sRGB color space before saving as JPEG (or use the Save For Web function to do that conversion while creating the JPEG).
There's really no "one set of best parameters" you can just set and forget for color-management. All the various settings and functions have a good reason for being provided. The important thing is to start to understand how color-management works, so you can begin to make the settings and workflow choices that make the most sense for you, to accomplish your goals.
Note that some programs aren't color-managed at all, still others are improperly doing it, and others actually get it right. You really can't be sure everyone is going to see your image in the correct colors, so you have to try for a good compromise. Yes, color-management in the real world is kind of a mess.
-Noel

Photos dark and pixelated?

Every time I open any photo in my photoshop it comes up very dark and pixelated. This happens to every single photo I try and open in photoshop. I know for a fact that the photos are not originally dark or pixelated. Im trying to edit 2 different peoples wedding photos and this Is very frustrating. im not sure if its just a setting in photoshop that would correct this problem or if its my actual photoshop. right now im running Photoshop CC ive never had a single problem with it till just this month. im at a loss. hope some one can help me!!!!!
THANK YOU!!!!

Are these raw files or jpgs? Can we see a screenshot of a side-by-side screenshot pasted into a reply, here, of a photo in PS and one as viewed in an OS viewer like Windows Photo Viewer or Mac OS Preview?

In Pages 5, Maverick, How do I stop automatic conversation of URLs to hyperlinks and seeing them underlined

There used to be a preference setting in Pages. Now it seems gone in Pages 5. So how do I stop automatic conversation of URLs to hyperlinks and seeing them underlined in text. Sometimes I want it, but not always.

The preference setting to turn off links is gone. When you enter content that triggers link detection, a link character style gets applied. Right-click on the link, choose Edit Link from the menu, and then Remove.
To prevent Pages from automatically detecting links, visit Edit > Substitutions > and deselect Smart Links.

When I click on a video in a website, the screen is just dark and nothing happens. Any ideas?

Videos are able to play on my computer in Internet Explorer, but in firefox, the video box is dark and nothing happens.
Application Basics
Name
Firefox
Version
6.0.1
User Agent
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:6.0.1) Gecko/20100101 Firefox/6.0.1
Profile Directory
Open Containing Folder
Enabled Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
DVDVideoSoft YouTube MP3 and Video Download
4.2.1.9
true
{ACAA314B-EEBA-48e4-AD47-84E31C44796C}
DVDVideoSoftTB Community Toolbar
3.18.0.7
true
{872b5b88-9db5-4310-bdd0-ac189557e5f5}
Elf 1 Community Toolbar
3.18.0.7
true
{22e03916-85c5-44b0-8dc9-1830c11238d9}
Freecorder Community Toolbar
3.18.0.7
true
{1392b8d2-5c05-419f-a8f6-b9f15a596612}
SporTV Community Toolbar
3.18.0.7
true
{a298ed31-d405-40e2-880f-b7511948e582}
TV Bar 1.2 Community Toolbar
3.18.0.7
true
{70a38074-97a6-45da-b1a1-34b0a34dc3ff}
Google Toolbar for Firefox
7.1.20110512W
false
{3112ca9c-de6d-4884-a869-9855de68056c}
Java Console
6.0.20
false
{CAFEEFAC-0016-0000-0020-ABCDEFFEDCBA}
Skype extension
5.3.0.7550
false
{82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
SOE Web Installer
1.0.3.135
false
{000F1EA4-5E08-4564-A29B-29076F63A37A}
vShare Plugin
1.0.0
false
vshare@toolbar
Modified Preferences
Name
Value
accessibility.browsewithcaret
true
accessibility.typeaheadfind.flashBar
0
browser.fixup.alternate.enabled
false
browser.places.smartBookmarksVersion
2
browser.startup.homepage
http://www.google.com/
browser.startup.homepage_override.buildID
20110830092941
browser.startup.homepage_override.mstone
rv:6.0.1
dom.disable_open_during_load
false
extensions.lastAppVersion
6.0.1
general.useragent.extra.scopes
;ShopperReports
gfx.direct2d.disabled
true
keyword.URL
http://search.conduit.com/ResultsExt.aspx?ctid=CT2856415&q=
layers.acceleration.disabled
true
network.cookie.prefsMigrated
true
places.database.lastMaintenance
1374799174
places.history.expiration.transient_current_max_pages
126728
places.last_vacuum
1304541882
print.print_printer
Microsoft XPS Document Writer
print.printer_Microsoft_XPS_Document_Writer.print_bgcolor
false
print.printer_Microsoft_XPS_Document_Writer.print_bgimages
false
print.printer_Microsoft_XPS_Document_Writer.print_command
print.printer_Microsoft_XPS_Document_Writer.print_downloadfonts
false
print.printer_Microsoft_XPS_Document_Writer.print_edge_bottom
0
print.printer_Microsoft_XPS_Document_Writer.print_edge_left
0
print.printer_Microsoft_XPS_Document_Writer.print_edge_right
0
print.printer_Microsoft_XPS_Document_Writer.print_edge_top
0
print.printer_Microsoft_XPS_Document_Writer.print_evenpages
true
print.printer_Microsoft_XPS_Document_Writer.print_footercenter
print.printer_Microsoft_XPS_Document_Writer.print_footerleft
&PT
print.printer_Microsoft_XPS_Document_Writer.print_footerright
&D
print.printer_Microsoft_XPS_Document_Writer.print_headercenter
print.printer_Microsoft_XPS_Document_Writer.print_headerleft
&T
print.printer_Microsoft_XPS_Document_Writer.print_headerright
&U
print.printer_Microsoft_XPS_Document_Writer.print_in_color
true
print.printer_Microsoft_XPS_Document_Writer.print_margin_bottom
0.5
print.printer_Microsoft_XPS_Document_Writer.print_margin_left
0.5
print.printer_Microsoft_XPS_Document_Writer.print_margin_right
0.5
print.printer_Microsoft_XPS_Document_Writer.print_margin_top
0.5
print.printer_Microsoft_XPS_Document_Writer.print_oddpages
true
print.printer_Microsoft_XPS_Document_Writer.print_orientation
0
print.printer_Microsoft_XPS_Document_Writer.print_pagedelay
500
print.printer_Microsoft_XPS_Document_Writer.print_paper_data
1
print.printer_Microsoft_XPS_Document_Writer.print_paper_height
11.00
print.printer_Microsoft_XPS_Document_Writer.print_paper_size_type
0
print.printer_Microsoft_XPS_Document_Writer.print_paper_size_unit
0
print.printer_Microsoft_XPS_Document_Writer.print_paper_width
8.50
print.printer_Microsoft_XPS_Document_Writer.print_reversed
false
print.printer_Microsoft_XPS_Document_Writer.print_scaling
1.00
print.printer_Microsoft_XPS_Document_Writer.print_shrink_to_fit
true
print.printer_Microsoft_XPS_Document_Writer.print_to_file
false
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_bottom
0
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_left
0
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_right
0
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
privacy.sanitize.timeSpan
0
security.enable_ssl2
true
security.enable_tls
false
security.warn_viewing_mixed
false
Graphics
Adapter Description
Mobile Intel(R) 4 Series Express Chipset Family
Vendor ID
8086
Device ID
2a42
Adapter RAM
Unknown
Adapter Drivers
igdumd64 igd10umd64 igdumdx32 igd10umd32
Driver Version
8.15.10.1840
Driver Date
7-3-2009
Direct2D Enabled
Blocked for your graphics driver version. Try updating your graphics driver to version 8.15.10.2202 or newer.
DirectWrite Enabled
false (6.2.9200.16492)
ClearType Parameters
ClearType parameters not found
WebGL Renderer
Blocked for your graphics driver version. Try updating your graphics driver to version 8.15.10.2202 or newer.
GPU Accelerated Windows
0/1. Blocked for your graphics driver version. Try updating your graphics driver to version 8.15.10.2202 or newer.

upgrade graphics drivers and firefox its self
* https://www.mozilla.org/en-US/firefox/all/
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]

I am using a Mac and when I save my files as a jpeg, the files become much smaller, and consequently darker and blurrier. What can I do to fix this?

I am using a Mac and when I save my files as a jpeg, the files become much smaller, and consequently darker and blurrier. What can I do to fix this? I have tried to figure out how to chat with someone at Adobe, but they certainly don't make it easy to do. At the moment, this program is useless to me. Very depressing....

Hello,
I would like to inform you that not all the browsers and online PDF readers support copying text from a PDF. If you have opened the PDF online, please download PDF file to your computer and then open the file in Adobe Reader.
Please share a screenshot if the issue still persists.
Regards,
Nakul

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on and back off. It is very, very frustrating. The other issue is that the battery drains very quickly. I have called Verizon numerous times regarding these issues. They tell me to do different things that never help. We eventually did a factory reset and it still has the same issues. Help! It is a brand new phone and unfortunately I am in a new two year contract. Ugh. Is there anyone out there who can help me?

I have done that several times. In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly. I keep telling them I have already done them but they insist they are SURE it will work this time. It never does. After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying. I did what you suggested above on the slim chance it would work this time but it did not. I bought two S5's that day and the other one works perfectly fine. I know I got a bad phone. Verizon just does not listen. It is a bad phone. I just want a new phone that works properly. Is that too much to ask? I bought a new phone that has been bad from day one. Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this? It shouldn't be this difficult! Help please!!!

Display alternates between dark and bright

I have several issues but I suspect somehow they are all related as they all began about the same time, within about an hour of each other, which was maybe a week ago.
Periodically, my display slowly cycles between dark and bright. Sometimes the display will suddenly go to sleep on it's own, usually after a period of about 20 seconds of me not doing something and when I wake it up the display is quite dim. Other times the computer goes to sleep (not just the display) requiring me to log back on. I use password for startup. I open the display settings after log-on and the brightness slider has somehow moved way over to the dark end (left). I slide it up to where I like it and soon it does it again all by itself again after a very short period of inactivity. I have noticed that if I leave the brightness control alone (dim) without readjusting it it seems to take longer for the other issues to develop. I would normally place the brightness slider just under half way up. My sleep time settings are currently: computer - 1 hr, display 15 min. That is plugged in which is pretty much the only way I ever seem to use it ... plugged in.
Another issue is an occaisional rapid beeping. It's the same low beep that you hear when you try to do something stupid and the computer is telling you you've made an error. The difference is this is a long, unending string of rapid beeps; I'd estimate maybe 15 - 20 beeps per second. The sound does not stop. I have to mute the speakers to shut it up. I have not yet been able to determine a recognizable pattern of common variables for when this happens. The other day when the computer went to sleep by itself and I woke it and tried to input my password and I saw that the input bar was filled with black balls as if it was remembering my password which I did not like but when I hit enter the logon dilaog box shook, the entry field emptied and refilled on it's own. I held the backspace key for several seconds and nothing seemed to happen. I used shift/command/arrow to highlight the entire string and deleted it but as soon as the characters were deleted I saw the input line quickly fill back up again one ball at a time at roughly the same rate as the beeps. Then it occured to me that the beeps were similar to those you would hear if you held a key down and filled an entire entry field with a hundred of a particular character and was still holding down the key long after the field was full. My first thought was that a key was stuck down. Not so. Each and every key is free to move and functions normally.
Last night I closed the lid to put the computer to put it sleep before I went to bed. About 3 hours later I was awakened by the sound of the rapid beeping. I got out of bed and went to the computer and opened the lid to find the same input line black balls issue but this time it was accompanied by the beeping and the display was also cycling between bright and dim. As it was the middle of the night I killed the machine by holding down the power button and forcing a shutdown. This evening I decided to do the upgrade from 10.9.1 to 10.9.2 hoping that might help but it did not. I have not heard the beeping since the upgrade but the display is still cycling, which was the first thing I noticed when all of this began.

Turns out it may have been sofware issue. I suspected software anyway because rebooting could temporarily cure it. I spoke to an Apple Service and Support person on the phone. She went through a fairly lengthy process with me to evaluate the machine and determine if it was hardware or software related. The results of those steps did not lead her to any concrete conclusions but she was able to hear the beeping issue happening in real time. She guided me through the steps of O/S recovery and now several hours later the machine appears to be functioning as it is supposed to. Typically the issue(s) would show up after maybe twenty minutes or a half hour after a hard boot. I am to monitor the thing for the next week or so watching for any signs of the issues slowly returning.
Here's keeping my fingers crossed.

HI all, i'm using Mac Pro 15" Retina. My screen goes darker and after brighter after a while? How to fix it?

HI all, i'm using Mac Pro 15" Retina. My screen goes darker and after brighter after a while? How to fix it?

System Preferences > Displays.
De-select "Automatically adjust brightness"

Help--why has MacBook screen gone dark and how do I get it back?

I have a MacBook (model 4,1 running OS 6.8). I use the MacBook as my desktop computer in conjunction with a separate desktop monitor. Today, when I unplugged a USB hub from one of the ports (after carefully ejecting anything on the desktop that needed to be ejected before unplugging), the screen on the MacBook--not the separate monitor--suddenly went dark. I thought it had gone to sleep or into screensaver mode, but noticed that the white light on the MacBook also wasn't showing.
The separate monitor display (on which I'm typing this message) seems fine. I checked DIsplays/Arrangement in System Preferences, but both displays were detected in their usual arrangement, though I did notice that the working display has a white bar across the top but the MacBook display doesn't have one. I clicked "Detect Displays," but that didn't change anything.
I then did a restart, and things seemed to go as usual: the shutdown went okay and on restart, the white light went on on the MacBook and the monitor screen lit up normally. However, the MacBook's screen is still dark and the white light is off.
Can anyone tell me why this happened and how to get my MacBook screen back? I don't know whether unplugging the hub caused the problem or whether it was just a coincidence that something that runs the MacBook display happened to fail right then. Would appreciate any help out there very much--thanks!
PS: Just tried shutting down and powering on again with the separate monitor unplugged, but the MacBook screen still stays black and the white light shuts off as soon as the desktop loads. When I plugged the separate monitor back in, it worked fine. So the problem doesn't seem to be a conflict with the separate monitor (which I've used for years).
Message was edited by: Turtlewiz

Update: I went away for an hour, and when I came back I saw that the white light had gone on as usual when the MacBook went to sleep. When I touched the keyboard, both displays went on; however, the MacBook display went dark immediately and the white light is still out.

Conversion failed when converting date and/or time from character string

Hi experts,
I'm trying running a query in Microsoft Query but it gives the following error message:
"conversion failed when converting date and/or time from character string"
when asks me the data I'm inserting 31-01-2014
i've copy the query form the forum:
SELECT T1.CardCode, T1.CardName, T1.CreditLine, T0.RefDate, T0.Ref1 'Document Number',
     CASE WHEN T0.TransType=13 THEN 'Invoice'
          WHEN T0.TransType=14 THEN 'Credit Note'
          WHEN T0.TransType=30 THEN 'Journal'
          WHEN T0.TransType=24 THEN 'Receipt'
          END AS 'Document Type',
     T0.DueDate, (T0.Debit- T0.Credit) 'Balance'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')<=-1),0) 'Future'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>=0 and DateDiff(day, T0.DueDate,'[%1]')<=30),0) 'Current'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>30 and DateDiff(day, T0.DueDate,'[%1]')<=60),0) '31-60 Days'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>60 and DateDiff(day, T0.DueDate,'[%1]')<=90),0) '61-90 Days'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>90 and DateDiff(day, T0.DueDate,'[%1]')<=120),0) '91-120 Days'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>=121),0) '121+ Days'
FROM JDT1 T0 INNER JOIN OCRD T1 ON T0.ShortName = T1.CardCode
WHERE (T0.MthDate IS NULL OR T0.MthDate > ?) AND T0.RefDate <= ? AND T1.CardType = 'C'
ORDER BY T1.CardCode, T0.DueDate, T0.Ref1

Hi,
The above error appears due to date format is differnt from SAP query generator and SQL server.
So you need convert all date in above query to SQL server required format.
Try to convert..let me know if not possible.
Thanks & Regards,
Nagarajan

After upgrading to Mavericks on my MacBook, I'm not able to download third party applications like Dropbox and MyCleanMac 2. After clicking the download button, the screen just turns dark and is frozen. Any idea what is happening?

After upgrading to Mavericks on my MacBook, I'm not able to download third party applications like Dropbox and MyCleanMac 2. After clicking the download button, the screen just turns dark and is frozen. Any idea what is happening?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Conversion to JPG to Dark and Oversaturated

Similar Messages

Maybe you are looking for