Conversion tool BO XI3 crashed with certain files without any reason

Dear all,
While using the conversion tool BO XI 3 to convert reports from deski to webi, I am facing some issue.
Without any reason, any warning and any explanations afterwards, the conversion tool just close.
And i dot not know why and how I can resolve this.
It only happens to some of my reports.
I opened them under BO XI 3 deski to have a look but they are working fine.
Did anyone had this kind of problem ?
Thank you,
Audrey

Yes indeed, but I have another issue (I posted another subject here) as for BO XI 3 deski:
http://scn.sap.com/thread/3591504
I can not open the deski files with problems because the folder is empty when trying to import from the CMS. It is like there are no documents at all whereas when I open the conversion tool they are all here (around 250).
It is strange because as for Webi 3 I can access to CMS and import documents without any problems.

Similar Messages

Mplayer crashes on certain files

my mplayer is crashing on certain files,
and on my observations it seems to be *.mkv files only.
MPlayer interrupted by signal 11 in module: init_audio_codec
with -nosound:
MPlayer interrupted by signal 11 in module: video_read_frame
even though i put mplayer's verbose message open, the only error i could find is the above.
it seems mplayer managed to crash itself in different modules, but i have no idea why.
plz help.
Last edited by b4283 (2009-05-01 07:47:18)

I'm having the same problem, when trying to play .mkv files SMPlayer gives the following message
MPlayer has finished unexpectedly. Exit code: 1
and the log shows:
/usr/bin/mplayer -noquiet -nofs -nomouseinput -sub-fuzziness 1 -identify -slave -vo xv -ao alsa -nokeepaspect -framedrop -nodr -double -input conf=/usr/share/smplayer/input.conf -stop-xscreensaver -wid 65011727 -monitorpixelaspect 1 -ass -embeddedfonts -ass-line-spacing 0 -ass-font-scale 1 -ass-styles /home/benji/.config/smplayer/styles.ass -fontconfig -font Arial -subfont-autoscale 0 -subfont-osd-scale 20 -subfont-text-scale 20 -subcp enca:en:ISO-8859-1 -subpos 100 -volume 40 -cache 2000 -osdlevel 0 -vf-add screenshot -slices -channels 2 -af scaletempo,equalizer=0:0:0:0:0:0:0:0:0:0 -softvol -softvol-max 110 /home/benji/Videos/TV/Prison Break - S04E17.mkv
MPlayer UNKNOWN-4.4.0 (C) 2000-2009 MPlayer Team
137 audio & 296 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Terminal type `unknown' is not defined.
Playing /home/benji/Videos/TV/Prison Break - S04E17.mkv.
Cache fill: 0.00% (0 bytes)
ID_VIDEO_ID=0
[mkv] Track ID 1: video (V_MPEG4/ISO/AVC), -vid 0
ID_AUDIO_ID=0
ID_AID_0_LANG=und
[mkv] Track ID 2: audio (A_AC3), -aid 0, -alang und
[mkv] Will play video track 1.
Matroska file format detected.
VIDEO: [avc1] 1280x720 24bpp 23.976 fps 0.0 kbps ( 0.0 kbyte/s)
ID_FILENAME=/home/benji/Videos/TV/Prison Break - S04E17.mkv
ID_DEMUXER=mkv
ID_VIDEO_FORMAT=avc1
ID_VIDEO_BITRATE=0
ID_VIDEO_WIDTH=1280
ID_VIDEO_HEIGHT=720
ID_VIDEO_FPS=23.976
ID_VIDEO_ASPECT=1.7778
ID_AUDIO_FORMAT=8192
ID_AUDIO_BITRATE=0
ID_AUDIO_RATE=48000
ID_AUDIO_NCH=6
ID_LENGTH=2590.46
ID_SEEKABLE=1
ID_CHAPTERS=0
[ass] auto-open
Opening video filter: [screenshot]
[ass] Init
[ass] Updating font cache.
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
ID_VIDEO_CODEC=ffh264
==========================================================================
Opening audio decoder: [liba52] AC3 decoding with liba52
Using SSE optimized IMDCT transform
MPlayer interrupted by signal 11 in module: init_audio_codec
ID_SIGNAL=11
- MPlayer crashed by bad usage of CPU/FPU/RAM.
Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and
disassembly. Details in DOCS/HTML/en/bugreports_what.html#bugreports_crash.
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
gcc version. If you think it's MPlayer's fault, please read
DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
won't help unless you provide this information when reporting a possible bug.
I'm using smplayer 0.6.7-1, mplayer 29188-2 (from testing)
Last edited by superrad (2009-05-03 11:17:33)

Why does Logic Pro 8.0.1 update now crash with certain templates?

I just updated to Logic Pro 8.0.1. The previous version, Logic Pro 8.0 never had this problem.
Logic Pro 8.0.1 starts up and functions overall just fine. However, when I try to open the "Instruments" template or the "Guitar Tones" template, it crashes Logic Pro 8.0.1.
The "Empty Project" template opens and works just fine.
I have not changed the original installed templates whatsoever, and I have never had a RAM issue on this machine. These exact templates all worked perfectly with the previous version of Logic on this machine (Logic Pro 8.0). The problem only occurred after the update to Logic Pro 8.0.1.
For the template "Instruments," Logic Pro 8.0.1. tries to load the audio files for "Basic Synth Det.exs" and crashes on "3hook24.wav".
Yes, I have verified and repaired the hard drive, and yes I have verified and repaired permissions.
Does anyone know what the problem with Logic Pro 8.0.1 crashing with certain templates could be?
http://img301.imageshack.us/img301/2574/basicsynthjv3.png
http://img117.imageshack.us/img117/6075/logicprocrashfs7.png

There should be a crash log, which you can view in the Console.app in your utilities folder. Look for 'Logic' logs. They are often arcane, but something obvious might jump out at you, like a certain plug in crashing etc.. If you look for the number of the thread that crashed, often there is an indication what brought Logic down in the listing details for that thread#.
+or the template "Instruments," Logic Pro 8.0.1. tries to load the audio files for "Basic Synth Det.exs" and crashes on "3hook24.wav".+
Did you check that this .wav file is still available (not corrupted) and plays OK in the finder?

CMS crash with core files and multiple report output generation

Happy new year to everyone,
Our BOXIR3.1SP6FP2 env has recently started behaving weirdly by triggering multiple output to users inbox and email notification out of scheduled reports. Also we have noticed the CMS crash with core file (almost 4GB) generation at the time of multiple report output.
Most of the times, CMC crashes and recycles itself. At few times, CMS services alone went shut down.
OS details: RHEL 5.5, 32 GB RAM, 8 core processor on each of the clustered node, Oracle 10GR2.4 CMS DB server, 11GR2.4 oracle reporting DB server and oracle 11.1.0.6 client.
2015/01/21 23:54:37.946|>=| | |28123|1534131088|{|||||||||||||||DBQueue::Read
2015/01/21 23:54:37.946|==| | |28123|1496185744|
|||||||||||||||(OracleStatement.cpp:156) Prepare: SQL: SELECT ObjectID,
Version, LastModifyTime, CRC, Properties FROM CMS_InfoObjects6 WHERE ObjectID
IN (1004050) ORDER BY ObjectID
2015/01/21 23:54:37.946|==| | |28123|1496185744| ||||||||||||||(OracleStatement.cpp:183) Prepared statement Execute
2015/01/21 23:54:37.965|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString 50293
2015/01/21 23:54:37.966|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString Unknown exception in database thread
2015/01/21 23:54:37.967|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString 33007
2015/01/21 23:54:37.967|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString CMS is unstable and will shut down immediately. Reason: %1...
2015/01/21 23:54:38.506|==| | |28123|1496185744| |||||||||||||||(OracleStatement.cpp:156) Prepare: SQL: SELECT ObjectID,
Version, LastModifyTime, CRC, Properties FROM CMS_InfoObjects6 WHERE ObjectID IN (1009213) ORDER BY ObjectID
2015/01/21 23:54:38.506|==| | |28123|1496185744| |||||||||||||||(OracleStatement.cpp:183) Prepared statement Execute
2015/01/21 23:54:38.512|==| | |28123|1455592672| |||||||||||||||(sidaemon.cpp:549) SUNIXDaemon::run: server restart flag is 1..
2015/01/21 23:54:38.513|==| | |28123|1455592672| |||||||||||||||(sidaemon.cpp:552) SUNIXDaemon::run: in abort ...
2015/01/21 23:54:38.513|==| | |28123|1455592672| |||||||||||||||(sidaemon.cpp:555) SUNIXDaemon::run: doing the WithAbort case ...
2015/01/21 23:54:38.520|==| | |28123|1496185744| |||||||||||||||(dbq.cpp:1357) DBQ: Time required to read 1 objects: 20.000000 ms
Thank you,
Karthik

Hi Denis,
I'm trying my best for the last few weeks to understand the core issue along with SAP however it is still a mystery.
>Ulimit -a
core file size          (blocks, -c) 0
data seg size           (kbytes, -d) unlimited
scheduling priority             (-e) 0
file size               (blocks, -f) unlimited
pending signals                 (-i) 270335
max locked memory       (kbytes, -l) 32
max memory size         (kbytes, -m) unlimited
open files                      (-n) 1024
pipe size            (512 bytes, -p) 8
POSIX message queues     (bytes, -q) 819200
real-time priority              (-r) 0
stack size              (kbytes, -s) 10240
cpu time               (seconds, -t) unlimited
max user processes              (-u) 270335
virtual memory          (kbytes, -v) unlimited
file locks                      (-x) unlimited
Below is the observation as part of troubleshooting:
1. CMS breaks at threshold of 3.9 G.
2. CMS DB sits in a different Linux server than BOE server.
3. All core files were generated by boe_cmsd process and are almost 4GB in size (same as max threshold which it breaks).
4. Shell script which I've added in the BOE servers shows that the CMS DB is available/connecting at the time of CMS crash.
5. SAP analysed the Core files and skeptical about the below lines.
     #3 0x58687b80 in skgesigCrash ()
      from /opt/oracle/product/11.1.0/client_1/lib32/libclntsh.so
     #4 0x58687e0d in skgesig_sigactionHandler ()
I'll continue troubleshooting with a hope to fix it at the earliest.
Thanks,
Karthik

Need free OST viewer tool to help to view OST files without connecting to MS Exchange Server and MS Outlook.

Need free OST viewer tool to help to view OST files without connecting to MS Exchange Server and MS Outlook.

Hi Howard,
As I know, Microsoft does not provide any kind of inbuilt tool or free software to only view OST file, even without the connectivity with exchange server (Offline).
Try SysTools OST Viewer freeware which helps you to view all OST file save at your system in an easy way, whether you want to see the attachments or other items of OST file.
Note: This is a free inbuilt utility, but try it on your own risk as I am not much aware about it and its working. But this tool sounds good according to your requirement and hopefully it would give you 100% satisfaction.
Thanks
Clark Kent

I seem to be having trouble "save" or "save as" with jpg files. Any Suggestions?

I seem to be having trouble "save" or "save as" with jpg files. Any Suggestions?

By the way, a full uninstallation and reinstallation is a bit heavy-handed and is not always necessary.
Keep in mind that with Photoshop CS6 the Plug-ins subfolder is now normally completely empty. So to undo an inappropriate copy of plug-ins generally you can just delete all the copied plug-ins and that will restore proper Photoshop CS6 operation.
Then you can reinstall your needed 3rd party plug-ins one by one.
-Noel

Send mail with attached file without using Repository

Hello,
I want to know if have a way to Send mail with attached file without using Repository.
Regards
Elad

Elad,
Check this article where a image has been picked by the file adapter and sent as an attachment to the mail adapter.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816">Sending an Image File Through XI in a File-to-Mail Scenario</a>
For how to proceed without integration repository content look into this blog,
<a href="/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository">How to send any data (even binary) through XI, without using the Integration Repository</a>
Combining these 2 you have the solution.
Regards
Bhavesh

Apex 3.0: export a report as .csv file without any Enclosed By character?

In Apex "Report Attributes page/Report Export" is possible to define the Enclosed By field.
The default Enclosed By by characters are a double quotation marks (" ").
Is there a way to export the report as .csv file without any Enclosed By character?
Example line format:
a) using default Enclosed By
"value1";"value2";"value3"
b) using ('') as Enclosed By
'value1';'value2';'value3'
c) using blank space as Enclosed By
value1 ; value2 ; value
d) without any Enclosed By character
value1;value2;value3
What can we do in Apex to export a report as .csv file with the line format example d)?
Thanks for your help.

Hi,
There is no Out of the box feature in Apex to achieve this functionality. But what you can do is write a page process to generate the CSV that you want.
For this what I will do is on the first page where you press the Button it will call a PL/SQL page process which actually generates the csv. You can keep the existing report only for display purposes. Find the below process which generate the csv that you require.
begin
-- Set the MIME type
owa_util.mime_header( 'application/octet', FALSE );
-- Set the name of the file
htp.p('Content-Disposition: attachment; filename="filename.csv"');
-- Close the HTTP Header
owa_util.http_header_close;
htp.prn('columnHeader1,ColumnHeader2,ColumnHeader3'||chr(13));
-- Loop through all rows
for x in (
Select column1,column2,column3 from table;
loop
-- Print out a portion of a row,
-- separated by commas and ended by a CR
htp.prn(x."column1"||','||x."column2"||','||x."column3"||chr(13));
end loop;
-- Send an error code so that the
-- rest of the HTML does not render
htmldb_application.g_unrecoverable_error := true; --You can leave out this line if you still want to display the existing HTML report.
end;
This will show a download box, so you can download the csv file. The page process should be called before header and the condition should be the button press.

How to not create File without any payload?

Hi XI Experts,
I have the following integration scenario:
1. One input file
2. One or more output files (up to four files)
3. At any given time, I could have one or more files (up to four files) filled with data in the payload.
Question - there are times where only one file will have data in the payload and three files without any data in the payload (by design). In this case, I do NOT want to create files that does not have any data in the payload. Is there any way I can do this without BPM? The output files that does not have any data in the payload is not going to be 0 byte as it will still have blank XML tags.
Again, we do not want to use BPM if there is any way around it. We are running XI 2004s SP7 (equivalent to 2004 SP16). Any help would be greatly appreciate it.
Here is the content of the ouput file WITHOUT any data in the payload:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:entity-data xmlns:ns0="urn:dow-com:xi:data:vendavo:10">
</ns0:entity-data>
Here is the content of the ouput file WITH data in the payload:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:entity-data xmlns:ns0="urn:dow-com:xi:data:vendavo:10">
    <com.Dow.customer.DCorporate>
        <VName>DCorporate</VName>
        <VLabel>013-ZZ</VLabel>
    </com.Dow.customer.DCorporate>
</ns0:entity-data>
Thanks,
Jay

Hi Jay..,
You can achieve this without BPM too.Your input is one file,by doing the Multi Mapping (1: N) you can acheive this.If there is no payload for any of the four files means simply put your four message types occurences as 0..Unbounded.
Check / Put an condition on your input file payload which field is determining whether data is containg for all or for some of the files.
So, if your input file containg the data for four files, those files are would be populated otherwise the files are not getting populated.I guess there is no use to create the blank XML structure.
Let me know your feedback.., It would be work for your case ..
Cheers
Tiger woods

Is it possible to convert Java to EXE and run this EXE file without any JRE

hello friends
I have GCC/GCJ for windows but dont know how to work with it... it creates file with .o extension but i m not able to create .exe from that... i installed mingw for that also .. unsuccessful ...
tell me the solution for it... i want to generate machine dependent exe from java file...on the web i ve seen that GCC/GCJ is used on linux platform..not cleared properly..
Again i m writing my question
Is it possible to convert Java to EXE and run this EXE file without any JRE if yes then how... tell me the procedure to do that...

Vipul wrote:
Its software now hardware .... some times u need these things ...anyway do u ve solution for my questionSo what? By creating a native executable you are restricting the program to the OS for which that native executable was made, just like removing the engine from a car restricts driving to downhill only. So like the I said, the principle remains the same, "Why would you want to?"
I am asking you, truthfully, why do you feel the need to negate the largest advantage of using Java by creating a native executable from it?
What is your rationale?
I can pretty much guarantee there is a much better way of achieving your wish without "removing the engine".

Sometimes, when we open the multiple pdf files, menu bar is disappearing without any reason.

Sometimes, when we open the multiple pdf files, menu bar is disappearing without any reason.

Hi pramodg23752205,
Okay, so are you facing this issue with all the machines or with a particular machine?
Does 'F9' key resolves the issue?
Regards,
Rahul

Three or four times a day the radio module in my iphone doesn't responding. Sometimes it happened during a phone conversation, sometimes without any reason during a day.

I have a problem. I use my iphone4 during one year. I bought it with firmware 4.0.2. Three or four times a day the radio module wasn't responding. Sometimes it happened during a phone conversation, sometimes without any reason during a day. Just I was out of connection for incoming calls. But it happened without any warnings on my iphone. After I have upgraded firmware to 4.1, this problem disappeared (baseband 2.10.04). But a week ago I upgraded firmware to 4.3.3 and my problem appeared again (4.10.01). I changed SIM-card, but it didn't help. How can solve this problem? I want to downgrade baseband to 2.10.04. Are there another solutions?

Hi ZachBrunelle!
I'm saddened that your having trouble with your device and you efforts are greatly appreciated, let's get to the bottom of this! You mentioned your device not having any physical damage, has it been exposed to anytime of water/moisture?

Is there a way that I can control iTunes with the iPhone without any internet connections?

First let me say that I am ready to throw this POS in the lake. Is there a way that I can control iTunes with my iPhone without any internet connections? On my houseboat I have a wifi router and want to connect my phone to my computer to control my music which plays from my computer through my stereo. I can easily do it with my laptop without having to jump through any internet APPLE BS , but I dont want to have my laptop out on the deck. I just want to use the phone as a remote control.
Remote wont do it because it keeps saying Im not connected to the internet, even though is is connected to my computer. Same problem with JumiAmp.

It should have an option to manage iTunes library without network connection, like Bluetooth or connect directly to the computer without a router or wi-fi, i live outsite of the city and i dont have the ability to control my iTunes librry from the iphone

Third Party Application Integration with Oracle EBS Without any middleware

Hi,
Please give suggestions about the Third Party Application Integration with Oracle EBS
Without any middleware. Can we achieve this?
Thank you,
Muhammad Nasir
Edited by: User129 on Feb 4, 2013 3:45 AM

Muhammad,
You may get better response in Oracle EBS forum -
General EBS Discussion
Regards,
Anuj

Can I upgrade to maverick, and still working with windows partitions without any problem?

I have a MacBook Pro runing Mac Os 10.6.8, and a partition runing windows 7, I want to Upgrade to Maverick.
Can I upgrade to maverick, and still working with windows partitions without any problem?

yeah I installed win7 64bit pro on lion and have since upgraded osx to mtn lion and then mavericks
and the windows partition to win8 and then win8.1 never done a reinstall of anything

Conversion tool BO XI3 crashed with certain files without any reason

Similar Messages

Maybe you are looking for