Conversion - Urgent reply

Hello Friends
Can yo please let me know tabout the following transaction are enjoy transaction or not.
As i am using the BDC in that ...
Production version C221
Certificate profile QC01
Tarrif zones T_76
Route 0VTC
Please send me the reply...for above transaction whether they fall in enjoy transaction or not??
I assure i will awarded the points for usefull information
Thanks
MANOJ

Hi,
the enjoy transactions are transactions that use the control framework. This includes but is not limited to, custom controls, tree controls, alv controls, splitter containers, docking containers, html controls, etc.
As mentioned a lot of transactions have been rewritten to use the new control framework. Usually the tcode with an "N" as the last character.
me21n,me22n etc.
So, in your case the transaction are not enjoy transactions.
Regards,
Bhaskar

Similar Messages

Pls urgent reply will be appreciated

A form i enclosed in a jscrollpane doesnt print the full form.
It only prints the part visible on the screen.
I,ve done all the 2d tricks like clipping, setting my imageable area all as i can...
pls urgent reply to this will be appreciated;
i attach my effort below..
public int print(Graphics g, PageFormat pf, int pageIndex) {
Graphics2D g2 = (Graphics2D) g;
Dimension d = getSize(); //get size of document
double panelWidth = d.width; //width in pixels
double panelHeight = d.height; //height in pixels
double pageHeight = pf.getImageableHeight(); //height of printer page
double pageWidth = pf.getImageableWidth(); //width of printer page
double scale = pageWidth / panelWidth;
//double scale2 = pageHeight / panelHeight;
int totalNumPages = (int) Math.ceil(scale * panelHeight / pageHeight);
if ( pageIndex >= totalNumPages ) {
return NO_SUCH_PAGE;
} else {
g2.translate(pf.getImageableX(), pf.getImageableY());
// shift Graphic to line up with beginning of next page to print
g2.translate(0f, -pageIndex * pageHeight);
// scale the page so the width fits...
g2.scale(scale, scale);
/*Rectangle rect = new Rectangle();
rect.x = getX();
rect.y = getY();
rect.width = getWidth();
rect.height = getHeight();
g2.setClip(rect);*/
paint(g2); //repaint the page for printing
//this.paintComponents(g2);
return PAGE_EXISTS;
}

Oh, my, it was so urgent that you didn't have time to go through the tips on [_Getting started with Sun Forums _|http://wikis.sun.com/display/SunForums/Tips], which would have shown you how to use the forum's code tags.
db

I am suspicious about my billing. What am I going to do? Awaiting for your urgent reply.

I am suspicious about my billing. What am I going to do? Awaiting for your urgent reply.

These are user-to-user forums, you are not talking to Apple here.
As you don't say what you are supicious about it's difficult to know what problem it is that you think that you have.
You can check the purchase history on your account via the Store > View My Account (Store > View My Apple ID on iTunes 11) drop-down menu option on your computer's iTunes), though I'm not sure if that shows in-app purchases and/or auto-renewing subscriptions . If you haven't purchased anything and you haven't added or changed your credit card details (when you do then a small temporary store holding charge may be applied to check that the details are correct and valid, which should disappear within a few days) then you can contact iTunes support via this page if you have charges that you don't think that you should have : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Using unicode in sms sending :)plz. urgent reply is needed.

when i want to send a sms of string of unicode. is it necessary to encode it in UTF8 or UTF16 ???
when i encode it then the length of the string comes larger.
can i send sms as a string of unicode without changing its length????
like this:
String str="\u270F";
// now str's length is 1
str = new String(str.getBytes("UTF16"));
//now str's length is 4!!!!!!!!
plz. urgent reply is needed.
best regards
tanvir

By default SMS has it's own text encoding and therefore you cannot use UTF8 nor UTF16. There is a special UCS2 encoding, alowing for 70 unicode characters to be send (per sms). See: http://www.dreamfabric.com/sms/

Requsting urgent Reply

Hi,
Can any body tell me the way how i need to upload storage bin data. which tool would be better whether LSMW or BDC
and whether SCAT can be used?
say for example we have 50,000 bins.
i am requsting an urgent reply. If u have any screen shots or process steps it would give me great confidence
thanks&regards

Hi
better use BDC as number of input data is more.
As per SAP CATT shoculd not be used for uploading data....
Use LSMW , when table control is not required.

Last field not shown in MONI if its empty during content conversion-urgent

Hi All,
 I have my input structure like
 <RECORDSET>
 <EMPLOYEE>
 <FIRSTNAME>
 <LASTNAME>
 <PHONENUMBER>
 </EMPLOYEE>
 </RECORDSET>
 I have given my sender Conversion parameters like
 Employee.fieldSeparator=*
 Employee.endSeparator='nl'
 Employee.fieldNames=FIRSTNAME,LASTNAME,PHONENUMBER
It is working fine.But if the value is empty for any of the field it is showing up with empty tag in MONI but for the Last field i.e.,PHONENUMBER if the value is empty the tag is not being shown in MONI. Please help me in this issue.It is very urgent.

Hi Dinakar,
I haven't tried but u can check these parameters and give it a try
NameA.missingLastfields
If the inbound structure has less fields than specified in the configuration then the XML outbound structure is created as follows:
○ ignore
Outbound structure only contains the fields in the inbound structure
○ add
Outbound structure contains all fields from the configuration; the fields missing in the inbound structure are empty.
○ error
Conversion is terminated due to the incomplete inbound structure. An error message is displayed.
● NameA.additionalLastFields
If the inbound structure has more fields than specified in the configuration then the XML outbound structure is created as follows:
○ ignore
Outbound structure only contains the fields in the inbound structure
○ error
Conversion is terminated due to the incomplete inbound structure. An error message is displayed.
The default value is ignore. If you have defined the NameA.fieldFixedLengths parameter, the default value is error.
NameA.lastFieldsOptional (obsolete)
You use this parameter to specify whether the last fields can be omitted (YES) or not (NO) in a comma-separated structure.
If you do not make an entry, the default value is NO.
Check for details:
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm
Sachin

Sharing music on iTunes! Urgent reply!

Hi, i am at university and when im connected the network a lot of students share their music online, allowing u to listen to their music on the shared server.
NOW
is there any way of being able to download this music to my library, and if so how?
reply urgently
cheers

surely there is nother way of just knocking on peioples doors and asking lol. There has to be a hack or programme which allows me to.
Oliver, do you realize that you are asking people here to help you steal music?
The music in shared playlists belongs to the owners of those playlists. They do not belong to you. If you obtain them through any means other than buying them yourself, then you will be guilty of piracy. Also, posting a question like this is a violation of the board's terms of use.

TB Conversations: Inline reply box not spell spell checking. How to set spell check for the inline reply box?

When using the inline reply box and I misspell a word the red line shows to indicate I have misspelled and yet when I right click ont he world there are no spelling suggestions. This feature does work if I reply through a new window, but not when using the inline reply box available with the Conversations plug in.

see this goto Option>Advance>General see screen shot now '''tik''' on it

ALV to excel conversion, Urgent

Hi Friends,
One doubt.
When i was saving an ALV Out put to excel sheet values in 3 coloumns are coming such that last digit is getting cut.
For Eg.
In ALV value is 0000017756
In excel its coming 000001775
Can anybody tell me what may be the cause of this.
Plz reply.
Thanks
Nitin

Hi Nitin
please use this
reward points boss.
Regards
Deepanker
DOWNLOAD ALV LIST TO EXCEL AUTOMATICALLY
TYPES:
BEGIN OF ty_upload,
 field1 TYPE c length 12,
 field2 TYPE c length 12,
 field3 TYPE c length 12,
END OF ty_upload.
DATA it_upload TYPE STANDARD TABLE OF ty_upload WITH DEFAULT KEY.
DATA wa_upload TYPE ty_upload.
DATA itab TYPE STANDARD TABLE OF alsmex_tabline WITH DEFAULT KEY.
FIELD-SYMBOLS: <wa> type alsmex_tabline.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
 EXPORTING
 filename = filename
 i_begin_col = 1
 i_begin_row = 1
 i_end_col = 3
 i_end_row = 65535
 TABLES
 intern = itab.
LOOP AT itab ASSIGNING <wa>.
 CASE <wa>-col.
 WHEN '0001'.
 wa_upload-field1 = <wa>-value.
 WHEN '0002'.
 wa_upload-field2 = <wa>-value.
 WHEN '0003'.
 wa_upload-field3 = <wa>-value.
 ENDCASE.
 APPEND wa_upload TO it_upload.
 CLEAR wa_upload.
ENDLOOP.
CALL FUNCTION 'SAP_CONVERT_TO_XLS_FORMAT'
EXPORTING
I_FIELD_SEPERATOR =
I_LINE_HEADER =
i_filename =
I_APPL_KEEP = ' '
tables
i_tab_sap_data =
CHANGING
I_TAB_CONVERTED_DATA =
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Another FM
MS_EXCEL_OLE_STANDARD_DAT
A simple option:
a) form download_file .
call function 'WS_EXCEL'
importing
filename = excel_name
tables
data = itab.
b) call function 'WS_DOWNLOAD'
exporting
filename = o_file
filetype = 'DAT'
tables
data_tab = i_tab
exceptions
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
no_authority = 10
others = 11.
if sy-subrc = 0.
message 'File is downloaded successfully' type 'I'.
endif.

Reports generation in pdf on reports server..urgent reply required

dear friends,
i tried generating reports in pdf format on the web browser.
the report gets generated if there is no parameter form without any problem.
but when a parameter form is called and then the report is called, there
is a message shown on the bottom of the web browser saying 'there was
an error in opening this document'.
This is not the case when working on the HTML document. it works both with
and without the parameters.i have the pdf acrobat version of 4.05b, and ie 5.5
Kindly help urgently.

Use text_io package of developer to write records to excel using OLE
Thanks
null

Typical scenario- urgent reply,,,

Hi All,
I have a requirement-
we get damaged products into plant- and we do value addition to the damaged product and sent it as a finished product to the customers, also we dont want to valuate it at plabt level as its customer product. And to that finished product we consume some raw material on shop floor.
( as I recieve it as x-material code, and as I am doing some value addition to the same X-material( want to create a production order, can nn this case we maintain same material code?),
any explanation & suggestions on this? in SAP R/3
reply at the earliest,
regards
svrinsapscm

Hi Srinivas,
This is an MTO scenario.
You recieve material from customer as X and u do some value addition and return the material to customer as X again. Please confirm if this is right.
Assuming Yes as answer, Suggest you to create Recursive BOM for each of such Finished material. Do not worry about the raw material in BOM you can add this directly to production order when you get the material and finish analyzing what component must be used.
Create sales order and you will run MRP for it. Convert the plan order to production order and then add the raw material in the production order. I assume that you will be doing quality inspection or prilimanary analysis to find out what compoenent must be added. Maintain this step as oper. 10 in your routing so that inspection activity time is also captured.
Routing can be maintained as default for base Qty. and minor chnages can be taken care of later. Since this is MTO and repair for damage material will require different amount of time for each time the finished material arrives for repair, you will have to make manual changes in timing of production order after inspection of damage has been done. This will ensure the planned cost is captured as well. Making chnages in CO11N directly is not recommended because it will create the variance in month end process.
Please note that in MTO scenario settlement of cost is important. you need to sit with finance and SD and decide where will the Cost for GR against production order be settled (SDI or MAT). Based on this, you might have to create a new strategy type as well.
Do let me know if u need more

UNICODE CONVERSION urgent

Hi friends,
can any one send the commom errors in unicode conversion project?

Hi ,
Hope it will help you,
The Link will be helpful to you.
Re: Upgrade 4.6 to ECC - What are the responsibilites
regarding Unicode influence in Standard programs
Very good document:
http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a
You need to use the transaction UCCHECK.
The report documentation is here
ABAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Display Modified SAP Programs Also
By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
Call transaction SAMT
Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.
Thanks
Jagadeesh.G

How to install Apache on Red Hat Linux Server-5.....Urgent Reply

I have rhel-5 and i need to instal apache on that.I dont have any idea about that.
Someone please explain step by step how to proceed with it.

944096 wrote:
I have rhel-5 and i need to instal apache on that.I dont have any idea about that.
Someone please explain step by step how to proceed with it.why is it URGENT for me to provide you with any assistance?
when all else fails Read The Fine Manual
http://www.oracle.com/pls/db112/portal.portal_db?selected=11
Handle:     944096
Status Level:     Newbie
Registered:     Jul 2, 2012
Total Posts:     10
Total Questions:     6 (5 unresolved)
why do you waste time here when you rarely get your questions answered?

Need UrGent ReplY

Hello everyone, i registered here just to ask a question and see if i can get good suggestions because other forums gave me nothing informative so i am trying this one.....so here goes
I am a Oracle beginner(no knowledge)
I am quite good with windows
Very Little or no knowledge with linux
Very Fast Learner ( due to EXcessive free time, and Very Fast internet connection with determination )
An undergraduate(1 more year) student studying Information Technology in university
Am grounded with other disciplines like programming, networking, troubleshooting, maintenance, web design, installations etc.
So i wanna begin with oracle but im left with a choice....what operating system( WINDOWS vs LINUX ) is preferred to learn...please i need informative answers with reasons and specifications.:D:D:D...thanks!!

You mentioned that you are a quick learner so read this to learn that how one should ask questions on a public and free forum like this one and why its not appropriate to mention urgent especially for a question like what you have asked.
http://catb.org/~esr/faqs/smart-questions.html
I am a Oracle beginner(no knowledge)Okay. Bookmark this site before you do anything else and from it, start reading Concepts guide of *11.2* version. The link is, http://tahiti.oracle.com .
I am quite good with windowsOkay
Very Little or no knowledge with linuxYou can start with a basic course over it. I would suggest to stick with learning Oracle and not to mix it with tens of things like learning linux or anything else. Be good in Oracle and than you can learn it.
Very Fast Learner ( due to EXcessive free time, and Very Fast internet connection with determination )No comments over it!
An undergraduate(1 more year) student studying Information Technology in universityFinish your studies first so that you can devote complete attention towards one thing, whatever it may be!
Am grounded with other disciplines like programming, networking, troubleshooting, maintenance, web design, installations etc.So what does this mean? If you are already so busy, do you really think that you would be able to learn oracle or anything for the matter of the fact with precision?
So i wanna begin with oracle but im left with a choice....what operating system( WINDOWS vs LINUX ) is preferred to learn...please i need informative answers
with reasons and specifications.:D:D:D...thanks!!Wanna? What's that word or you wanted to say 'want to' ? Use professional language over forums like this one not IM speak like u , wanna, plz! About learning, I guess from what you just mentioned above, you are already having a year with you to decide it and to get free time to learn anything with complete attention. Other than that, there is no such thing that linux is better than windows and windows is totally useless. Both are good but that depends on how much good is that person who is managing it. So learn anyone but be good in it. Linux is spreading more across everywhere so having its knowledge surely would help in addition to windows knowledge ( which you have already said you are very good at).
HTH
Aman....

Congiguring jsps with oracle8i,urgent reply needed

Beginner for oracle8i ---need ur help
I have installed oracle8i database server8.1.5 on winNT workstation which has Jserver to run java components.
Please tell me how to run jsps with oracle8i.
Ihave written certain jsp files but don't know where to put them and how to start the server to test them.This is an urgent requirement for my client,if anybody can help.
A great thanks in advance.
null

Do you refer to the 9i AS Metadata Repository / iasdb?
then,
1) yes, if mid-tier components (like Reports) metadata is stored there
2) do you consider your apps important?
Also note that Infra. and Mid-tier installs should be backed up sync'd (both at same time). There is a paper on OTN about this.

Conversion - Urgent reply

Similar Messages

Maybe you are looking for