Convert 2320 MFP printer from 220v to 110v

I have some HP2320 mfp printers that were mistakenly ordered to operate on 220 volts. How can I convert them to operate on 110 volts? Is it only the power supply that must be changed to accomplish this? If so, I have some defective 2320s that I could take the power supply out of.
I could use a step up transformer but prefer not to take that route.

I do not see a listing for the poser supply, but the fuser has different versions for the 110V and 220V versions.  See the HP parts site and search for the laserjet 2320.
This forum is focused on consumer level products.  For your issue you may have better results in the Enterprise Bussiness Support forum here.  This question arises there with some frequency and an expert there may be able to give you specific details.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • Do the latest iMacs (new slim version) still support auto-switching from 220V to 110V?

    do the latest iMacs (new slim version) still support auto-switching from 220V to 110V?

    Yes. Apple power supplies work with voltages between 110 and 240 v.
    Allan

  • Convert LaserJet 5200 220v to 110v power

    Is it possible to purchase the proper parts to convert a LaserJet 5200 from 220v to 110v?
    I know about power converters, but just thought it would be better to convert the thing if possible. thanks.

    my recommendation is to use an external converter
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Plugged 110V 2320 Printer into 220V. Wont turn on now. Help!

    Plugged 110V 2320 Printer into 220V. Wont turn on now. What do you think needs to be checked/replaced?

    Your printer needs to be serviced to replace power supplies.
    I work for HP

  • MFP M127fn connected, test printing OK, can't print from applications

    Hello Everyone!
    I have just set up my M127fn via USB on a Windows 8 system. The set up went fine. I have a small stack of test pages from the HP software, but it won't print anything from any applications like MSOffice. The HP diagnostic software (Print and Scan Doctor 4.6)  can communicate with the printer and everything checks out OK.
    Any suggestions?
    Thanks in advance.

    Hello! 
    I have replied twice to your last posting, but have heard no response. Unless a solution can be presented quickly, I fell I must return the product. LPug and play was introduced with Windows 95 and this HP product has not lived up to that 20 year old technological standard. My previous replies are copied below.
    Please respond soon.__________________________________________
    Re: MFP M127fn connected, test printing OK, can't print from applications
    Options 
    ‎01-31-2015 08:06 AM
    Hello again!
    I haven't heard a response to my most recent reply. Is there anything you can suggest before I give up and return this HP product to the store? I would like a quick resolution to this. As an update to my previous email (copied below), printing is no longer working through Adobe Reader.
    Thanks,
    Chris
    Re: MFP M127fn connected, test printing OK, can't print from applications
    Options 
    ‎01-28-2015 01:08 PM
    Hi,
    Thanks for getting back to me. I have tried a variety of different programs:
    Mozilla Thinderbird (email) - no results
    MS Word - no
    ms excel - no
    Finale (music software) - no
    Adobe Reader - yes!
    Google Chrome - yes!
    NotePad - yes!
    perplexing!

  • Anyone unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp

    I'm unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp. The HP website says that the HP LaserJet M1319F MFP is compatible with Lion 10.7.2.  Every time I try to perform a Test print I get an Error msg.  I'm using driver version 1.3.0.261

    https://discussions.apple.com/message/23765195#23765195

  • Hp laserjet 100 color mfp m175 does not print from network nor via usb cable

    My hp laserjet 100 color mfp m175 just stopped printing last week. I have tried everything recommended but nothing works. I have re-install it both on wireless network and usb connection = nothing works. It prints all internal reports but nothing from any computer. I have 3 computers which I have tried to print from. It even does not print the test page. Please dont recommend to update drivers etc. as I have spend 2 whole days on this and nothing works!

    Hi @einar1854, 
    I see by your post that you are unable to print by a USB or Wireless connection on 3 different computers, but the printer will print the hardware self tests. I can help you with this.
    Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
    For the USB connection, follow these steps if the there are no errors from the Print and Scan Doctor.
    (once we get the printer printing this way, we can setup the wireless)
    Here are steps to remove the jobs from the spool folder and restart the print spooler.
    How to Clear Current Print Queue In Windows Vista & Windows 7.
    Follow the steps in this document to get to the device manager to check for the printer entries.
    How do I get into Windows Device Manager?
    Then click on Identifying problems in Windows Device Manager.
    In the list click on Universal Serial Bus controllers and look for USB mass storage device and USB printing support, (make sure any other printers are turned off or disconnected)
    Let me know what it showed in the device manager.
    Check to make sure the proper port is selected.
    Go to start, Devices and Printers, right click the printer and left click Printer Properties, select the Ports tab.
    Make sure the USB has a check mark beside it, if not put the check mark there and apply the changes.
    Check the print Queue.
    In the Devices and Printers folder.
    Right-click the name of the product and then click See what's printing .
    Click the Printer button, then click Cancel All Documents if there are any documents in the queue.
    Click Yes to confirm the action.
    If documents remain in the print queue, restart the computer.
    Try printing again.
    What operating system are you using on the 3 computers? How to Find the Windows Edition and Version on Your Computer.
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    Print a configuration page to see also if the printer has a valid IPV4 address, so we have that information for when we setup the wireless. Printing a Configuration Report.
    Provide the first 3 sets of numbers in the IPV4 address.
    Please provide in detail the results if you are still having issues.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Converter to reduce 220v to 110v

    do I need one for the battery charger for my  iPhone 4 in Europe ?

    I made it to Europe and you do not need a 220v to 110v converter,
    You do need a battery charger.

  • How to print from iphone to hp color laserjet CM1017 MFP printer

    How to print from iphone to hp color laserjet CM1017 MFP printer

    In order to AirPrint from your iPad/iPhone, here's all you need to do:
    1. Make sure the printer and iPad/iPhone are connected to the same local network.
    2. Open something you want to print (on the iPad/iPhone).
    3. On the iPad/iPhone, tap the "Action" button (arrow curving out of a box).
    4. Tap "Print".
    If you have any issues with printing, below are some steps that should help you out!
    1. Power off the printer.
    2. Completely power off the iOS devices (hold the Sleep and Home buttons simultaneously until a message appears asking you to "Slide to power off". Slide across that bar, and it should completely power off).
    3. Power the printer back on.
    4. Power the iOS devices back on.
    5. Try to print again.
    Those steps usually resolve the issue. If they do not, try this additional steps:
    6. Power cycle your router (usually done by unplugging the router’s power cord, waiting 20 seconds, and plugging it back in).
    7. Make sure that the iOS devices and the printer are all connected to the same network, then try to print.
    If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • When i try to print from Parallels Desktop to my mac printer, it cannot convert the prescript file.  what should i do?

    i use Quickbooks accounting for windows and when i bought my new mac i had to buy parallels desktop so that i could continue to use my accounting software.  it has been working since then and i dont know what happened, but now when i print something i get a message saying that states "Unable to Convert The ProScript File".
    Help Please!!!
    Niko96
    i need this fixed a.s.a.p!!!!

    I don't have Parallels; I use Fusion. And in Fusion you have the option to use the installed printer is OS X to print. I have seen printing from Windows 7 to the Mac printer result in errors and there is a chance you are having the same issue.
    If Parallels has the same facility where you can use the Mac's printer then I would suggest that you install a Windows driver for your printer in Parallels and not use the Mac printer. This should stop the conversion error you are getting.

  • HP LaserJet Pro 100 Color MFP M175nw - Problems printing from Mac laptop

    Hi 
    I have never managed to get my prnter to prnt wirelessley from my laptop (Mac Book Pro - (OS X Version 10.6.8). It will print when connected via the USB cable however when I try to print wirelessly, the printer dialogue indicates that the printer is offline. Both of our iphones will print wirelessly from the printer.
    Please help!

    Hi rachelwallace,
    Not sure what happened there. Should have gotten a blue wireless light when connected to the printer's network.
    You could restore the printer's defaults and try one more time.
    Restore the printer's network defaults.
    Touch the Setup button. (wrench)
    Select Network Setup Menu.
    Then select Restore Defaults.
    Print out a configuration report to make sure the IP address is 0.0.0.0.
    Try the previous steps for setting up the Adhoc to Infrastructure connection.
    If you are still having issues and you have a Ethernet cable, connect it from the printer to the router.
    Wait about a minute, print the configuration page to see if you get a IP address.
    Printing a Configuration Report.
    Then type the IP address into Internet Explorer's address bar to bring up the printer's web page.
    Select the networking tab, wireless on the left hand side.
    Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings.
    Then disconnect the Ethernet cable.
    Then wait a minute to see if you get a wireless light on the printer, print the configuration page and check the IP address again. Then type the IP address into Internet Explorer's address bar to bring up the printer's web page. That way you will know that the printer is now networked.
    Since the software is already installed, all you have to do now is add the printer on the Mac.
    Click the Apple icon ( ), and then click System Preferences.
    Click on Print and Scan.
    Click on the + sign.
    Highlight the printer in the list.
    Click on the add button.
    Test the printer.
    In case you don't have a Ethernet cable you may try the wireless direct setup.
    On the printer, touch the setup button, (wrench) then select network setup menu, select wireless menu, select wireless direct and turn it on.
    On the Mac, click on the Airport and select the printer from the list to connect to.
    Then open Safari and type in the IP address for the wireless direct  (192.168.223.1) for the printer in the address bar. (don't worry about the light on the printer)
    This will load the embedded web server for the printer.
    Select the networking tab, wireless on the left hand side.
    Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption.
    Apply settings.
    Click on the Airport and connect back to your network name.
    Print out a configuration report to make sure the IP address is valid. (192... or 10....)
    Then add the printer on the Mac.
    Test the printer.
    Please let me know the results.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HT204135 not able to add my hp laser jet 3330 mfp printer, I get a message that it is not currently available from the software update server. What do I do?

    how can I installed my hp printer when I get a message that it is not currently available from the software update server?

    The drivers are there.  I see this quite often.  What's happened is the supported devices list on the Mac is a little out of date.  All you should have to do is disconnect the printer from the Mac, run Apple Software Updates, restart the Mac, connect the printer back to the Mac, and add the printer's queue to the Mac.  You can find a little more information on this and other helpful tips in the link below.  Let me know what happens.
    Basic Printer Troubleshooting Steps for Mac
    I am a printer tech for HP.

  • Convert the smartform output to PDF when giving print from vf31

    Hi Gurus,
    I am facing one problem.I developed the program to chnage smartform output to PDF file when giving invoice print from VF02/VF03.
    The same functionality i want to appy when i am giving print for the invoice through VF31.
    I put the break-point in the driver program.But it is not stopping there when i am giving print from VF31.
    How can i do this one..
    Please Help Me.
    Thanks &Regards,
    R.P.Sastry

    Which Program you are putting the Breakpoint?

  • How to print from 14 without converting to pdf? running ics on galaxy s iii

    i have galaxy s iii on sprint. currently still on ics. when i open the main hardware menu for general options i have no button for print. there is save to pdf... which i could print through another app after finding the file. but it would be nice if there was a way just to click print from menu.

    you two clearly have no experience or are in any way knowledgeable regarding android programs. printing is widely available through many programs. both browser and also independant printing apps as well. previous versions of the Firefox app supported printing through addons. howvlever at least now i am aware of how useless asking on this forum is

  • My Andoid Devices wil not wake up my printer from Power Save Mode

    I have an HP LaserJet Pro 200 color MFP M276nw istalled as a wireless network printer. I have various computers with XP and Windows 8 operating systems that wake up  the printer from Power Save mode without problems. I also can print wirelessly from my Windows 8 phone. The problem arises when I try to print from my Android devices. I have installed the HP All-In-One Remote App from the Android Store and they seem to have installed correctly. They recognise the network printer, tell me that it is Power Save mode but are unable to wake it up. Can anyone help with this one please?
    The Andoid version on the Tablet is 4.2.2
    This question was solved.
    View Solution.

    Hello Jerends and thank you for your attention to my printer problem. My printer already has a fixed IP address so no need to go down that road. I managed to get around the problem by deleting the HP All in One App from my Android devices and replacing it with the HPePrint App. It's not perfect but does the job.
    Thanks again.

Maybe you are looking for