Convert 4.3 SD images into 16.9 DVCPro50 project with Streamclip?

I have 2 instances of Standard video 4.3 images to fit into a 16.9 HD project.  In one case the 4.3 image is quite smaller and square (with 2 black bars top and bottom): it's 800x600 to be fitted in a 1920x1080 project.  In the other the 4.3 image is quite bigger, and Standard video to fit into a DVCPro 50 Project.  I read the definition of Letterboxing in Wikipedia but it describes converting 16.9 to 4.3 and not the other way around.  Is it possible to do it?  Could Streamclip convert the Standard video format to fit the HD project?  Many thanks in advance.

As you said, what you are trying to do is not letterboxing. In order to fill the 1920x1080 frame you will need to scale the clips (in the motion tab) until they fit the width of your frame. But in doing so you will clearly loose quality and top and bottom cropping will occur so you might not be able to frame it as you want.
When you place an HD clip into an SD timeline you will need to downscale pretty much in the same manner.
If you need to scale SD clips to HD on a regular basis, you might want to look into InstantHD.

Similar Messages

  • How do i convert my scanned jpg images into word

    How do i convert my scanned jpg images into word

    No, Acrobat Pro is expensive
    95% of all the professional scanned in books are in PDF, the entire structure and countless years of work have gone into Acrobat being not just the "best" standard for scanned books, but really the ONLY standard for them.
    Yes, many many little programs can convert to PDF after you have them in a file, or even from Safari you can "print as PDF" or "save as PDF"
    however it just saves them as PDF, and you can use Acrobat READER for free,....
    but Reader is just that, a reader, you cannot do pro editing, scale down the file size etc etc, signatures, portfolios etc.
    Ive got a 42 Terabyte collection of PDF books,.....Ive spent too much time staring at PDF books   LoL.

  • Convert binary data (TIFF image) into XML - how ?

    Hi,
    I have the following requirement:
    1. A document is scanned and a TIFF image is saved in a directory
    2. The File adapter picks up the image file and sends into XI
    3. The binary data is converted into XML so a Web Service can be called (this web service will store the image in a database application)
    <b>The part I am struggling with is the convert of the incoming binary data into a XML format document which will allow the Web Service to be called.</b>
    Graphical mapping cannot be used therefore I am left with 3 options:
    1. XSLT mapping
    2. Java mapping
    3. ABAP mapping
    Can anyone suggest the best option to use in these circumstances and provide some sample snippet of code on how to do it.
    I am alright at XSLT mapping but this is beyond me and Java mapping is completely new to me as I have very limited Java knowledge.
    Thanks for your help
    Colin.

    Hi Colin
    Look for the below link
    https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10dd67dd-a42b-2a10-2785-91c40ee56c0b
    <b>***Reward point if helpfull</b>
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10dd67dd-a42b-2a10-2785-91c40ee56c0b">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10dd67dd-a42b-2a10-2785-91c40ee56c0b</a>

  • How do I convert time lapse still images into a video in Premire Elements 13?

    I have 250 images taken at 15 second intervals that I want to convert to a video. I am not having any luck finding how to get elements to put the single pictures together. After I import the images I can play them but have not been able to shorten the time each still plays. So It is like a slide shot and not time lapse.

    Bobclarkfiber
    Please read my blog post very details how to for Time Lapse video and Premiere Elements.
    http://www.atr935.blogspot.com/2013/07/pe-time-lapse-video-basics.html
    and my less preferred way
    http://www.atr935.blogspot.com/2013/08/pe-numbered-stills-in-time-lapse-and.html
    Please review and consider. If you have questions or need clarification on any of the above, please do not
    hesitate to ask.
    Thank you.
    ATR

  • Convert a web clip widget into an actual dashboard widget with Dashcode?

    So, I have created a widget using the Safari web clip option. I want to make it a permanent widget & not have to recreate it every time I relaunch my computer. I know Dashcode is used to make widgets, but is there a way to take my web clip widget and save it/export it and import it into Dashcode and make it a true widget I can save and have in my dashboard at all times?
    Or does Dashcode only allow for building a widget from scratch?
    At this time, I see no place where my temporary web clip widget has been saved on the computer, so not sure where it is even living to try to import it?

    bump.. any help?
    I have used some utilities to reveal hidden files and I cannot even find a hidden webclip widget of the widget I made... so I have no idea where its data is stored as it is not in either the root or users "widgets" directory. The webclip widget I made persist through relaunches of the computer, but is not an available widget in your dashboard to select from so if you close it, you have to go back and remake it.

  • Getting digital cam images into the iPad when shooting with a non-SD card.

    Just thought I'd let people know, I was able to get my really inexpensive Targus USB 2.0 media adapter to connect to the USB camera adapter on my iPad. This allows me to import photos from my Olympus Evolt digital camera that uses an XD or Compact Flash card. Also worked with our two other small digital point and shoot cameras that use non-SD cards. It also lets me use my Micro SD card from my Samsung Moment cell phone.

    Hello strmchsr,
    Thank you for sharing your issue with the community. We certainly want to resolve this as quickly as possible. I understand you must be frustrated. I would like to ask you a couple of questions to better understand your concerns.
    What specific error message are you receiving on the iPad?
    Have you been able to connect the Mifi 2200 to another device such as a laptop or computer?
    If so what were the results? If not I have included some troubleshooting steps below.
    I recommend trying to activate the Mifi 2200 on a windows based pc using the usb cable that came with the device. http://vzam.net/
    The recommendation to remove the battery while the device is powered on is a great option, as ttb_62 suggested.
    As a final option you can perform a hard reset provided that you have the original sticker from the Mifi 2200, which will include default password and the MEID number. I have included a link below to assist you.
    Hard Reset:
    http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=23749
    Once you have tried these steps please retest your data service for functionality. If the issues persist please advise us and we will provide additional assistance.
    Sincerely,
      JonathanK_VZW
    VZW Support
    Follow Us on Twitter@VZWSupport

  • How to Convert Bitmap Images into WPF XAML files

    I am tasked with converting about twenty bitmap images into a workable XAML file complete with all of the path statements, line segments, arc segments, etc. Is there a tool out there that take the bitmap image and create an entirely new XAML file?
    Thanks,
    Barton

    Hi,
    maybe:
    http://stevenhollidge.blogspot.de/2012/05/converting-images-to-paths.html
    http://stackoverflow.com/questions/129972/convert-an-image-to-xaml
    http://stackoverflow.com/questions/15082716/can-we-convert-an-image-to-xaml-using-expression-blend
    this is not a trivial task [and maybe beyond the scope of this forum]. If you had some vector image like svg images there might be a control out to use, but with raster images, I dont know of any control or code to use; I *think*, you will have to vectorize
    the image content yourself, which isn't that easy...
    So, is Background and Foreground easily distinguishable? Do shapes overlap? ...
    If there are only some shapes in the image and BG and FG can be separated easily then you could "scan" the image by some chaincode like operation to get the contours/contour vectors and then decide what to do. If there are patterns in BG or FG
    things will become more difficult, you then will have to perform more math-to-image operations and a vector-representation while reading/scanning the image might not be enough (keywords are computer vision, pattern recognition [with multi-linear-forms] etc).
    Maybe an existing computer vision [-able] component loke opencv can help a lot...
    Edit: I just did a google lookup and found eg this:
    http://www.cs.ucla.edu/~dt/theses/vasilescu-thesis.pdf
    I havent read it so far, so I cannot say, if its what you need, but title and a quick view into looks promising/interesting.
    Regards,
      Thorsten

  • Converting image into byte array

    Hi all,
    How to convert an integer array image into byte array ?
    here i have a image like this :
    private static int pixelArray[] = {
    0xff000000, 0xff000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
    0xff000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
    From this one i create image like this one :
    Image image = Image.createRGBImage(pixelArray, width, height, true);
    Now i want to convert that pixelArray into byte array ? how to do this
    additionally i want to send this byte array to servlet .
    thanks in advance.

    Hi,
    If you want to convert your int array to a byte array you should
    split each integer into 4 bytes to avoid losing information. You can
    rebuild your integer array later if you need to. I think this code
    will work (i havent tested it):
    byte[] pixel= new byte[pixelArray.length<< 2];
    for (int i= pixelArray.length- 1; i>= 0; i--) {
      int aux= i<< 2;  // i* 4 = i<< 2
      pixel[aux]=    (byte) (pixelArray>> 32);
    pixel[aux+ 1]= (byte) (pixelArray[i]>>> 16);
    pixel[aux+ 2]= (byte) (pixelArray[i]>>> 8);
    pixel[aux+ 3]= (byte) pixelArray[i];
    Greets.

  • Multiple images into a subform in a dynamic non-interactive adobe form

    I want to convert a set of images into a PDF (one page for each image) with Webdynpro. I'm trying with a non-interactive adobe form.
    I followed the tutorial "Dynamic Non-Interactive PDF Form".
    I've got a multiple Context node: 'Images' with a string attribute 'url' for each image.
    In the form, I've created subform1, and subform2 within. I put an image field into subform2, setting its url to: $record.Images[*].url
    and its script to: this.value.image.href = xfa.resolveNode(this.value.image.href).value;
    It doesn't work.
    If I add a field into subform2 binding it to url attribute, I can see some lines with the correct path for each image, but the image isn't displayed.
    It works with a single dynamic image in the page. What am I doing wrong?
    Regards
    Anibal Pozo.

    No. It's form scripting. In any case I'm working with Webdynpro Java.
    I tried this code in table 'initialize' event.
    for int=0 upto $record.nImages do
    Table1.Row1[int].ImageField.value.image.href = $record.Images[int].url;
    Table1.Row1[int].Cell4.value.#image.href = $record.Images[int].url;
    endfor
    Cell4 is a static image.
    In 04SP9, it show always the same image in the image field (first column), and alternating image in cell4 (second column).
    In 04sSP6, it shows always the same image in all the rows in both columns.
    Any idea? I didn't find any OSS related.

  • Help!  I drag an image into pages but it gives me the images info instead of the picture!  What do I do?

    Does any one know what i need to change.  When i'm dragging an image into pages it ends up with the images info and web address rather than the image itself.  What should I do?
    Thank you.

    Try dragging the image to the desktop and then to the Pages document or
    Select and copy the image and paste it into the document.
    It could be that the webpage is making it impossible to knick the image. I have encountered that a few times.

  • Importing images into projects

    can any1 please tell me how to import images into my netbeans IDE projects?this should be such that the jar file that is created displays them correctly- i am having this said problem with .jar files.
    plz help!!

    i use a function createImageIcon(ImageIcon icon) wfor which i provide a definition.
    the definition is as given in the java tutorial as follows
    protected static ImageIcon createImageIcon(String path)
    java.net.URL imgURL = LabelDemo.class.getResource(path);
    if (imgURL != null) {
    return new ImageIcon(imgURL, description);
    } else {
    System.err.println("Couldn't find file: " + path);
    return null;
    the program executes perfectly from the IDE when i use the run finction of F6 key. I use netbeans IDE. the images are kept in a folder named images in the 'src' folder of the project. this folder is used to store source files by the IDE. The main thing is i put the images in such a place that the program executes perfectly without errors from the IDE. using the IDE which shows the contents of a .jar file, i verified that the images are indeedd present in the JAR file. however i still continue to get the same error. infact after add ing the images folder and running a 'clean and build' operation , the only difference is that the jar file, which still doesnt display images on buttons, labels etc has increased in size confirming tht the images have been added- i also verified this from the command line.
    but the same problem persists.

  • How can i convert an image into gif file as jpeg by using com.sun.image.*

    please help me to convert an image into gif format. i have used sun's impl com.sun.image.code.jpeg package to convert a buffered image into a jpeg file. is there any implementatioln available from sun to handle gif files.

    Many. Try for instance google with 'java image encoders'. Go to the URL http://www.google.com/search?q=java+image+encoders and be amazed of the wonders of modern web search tools.

  • Photoshop CC 2014 - Stack Mode Disabled - Load Image Into Stack Has No "Convert To Smart Object" Option

    Hi,
    I have just installed Photoshop CC 2014.1 and I have "Stack Mode" command disabled.
    Also, I have no option to convert layers into smart object  when I run "Load Image Into Stack" command.
    Can you please tell me how to enable these features?
    Thank you very much.
    Luca

    The 512 MB are a minimum requirement, not some optional thing. Without it, 3D will never work.
    Mylenium

  • Using QuickTime Pro to convert a series of JPEG images into a QT movie?

    Can I use QuickTime Pro to convert a series of JPEG images into a QT (uncompressed) movie? Thanks...
      Windows XP  

    Yes.
    One of the features of the QuickTime Pro upgrade is "Open Image Sequence". It imports your sequencially named (1.jpg, 2.jpg) liked sized images (any format that QT understands) and allows you to set a frame rate.
    http://www.apple.com/quicktime/tutorials/slideshow.html
    You can also adjust the frame rate by adding your image .mov file to any audio clip. Simply "copy" (Command-A to select all and then Command-C to copy) and switch to your audio track.
    Select all and "Add to Selection & Scale". Open the Movie Properties window and "Extract" your new (longer or shorter) file and Save As.
    As you've posted in the Mac Discussion pages but your profile says XP you'll need to subsitute Control key where I reference Command key.

  • HELP - CONVERTING A JPEG IMAGE INTO A LINE DRAWING

    PLEEEASE HELP ME!!!
    sorry to be thick - im only a beginner   ---   is there any way to covert a jpeg image into like a line drawing where there is a block colour background and solid lines that make up the picture like you sometimes get in brochures - somthing different to just the effects that are availible in the filter gallery...
    thanks
    LUK

    As far as I recall there's no magic/easy "convert to vector drawing" functionality in Photoshop, though there are some things you can do to help smooth rough edges (e.g., Filter - Noise - Median).  There are also some things you can do, if you want to get fancy, based on converting selections to paths, but that can get kind of involved and likely requires manual path editing afterward.
    I have heard there are some pretty decent vector conversion functions in other Adobe apps...  Adobe Illustrator, perhaps?  Someone who uses Illustrator may want to chime in here; I don't have that package.
    -Noel

Maybe you are looking for