Convert a blank project to responsive project

Hi, I have created a tutorial in captivate 8. I created it in 'blank project' as I was a new user. I am wondering if there is any way I can change it to a responsive project. Please Help ASAP! Thank you in anticipation.
Hoping to hear from you soon
Regards
Simi

Hi Simi,
You can follow below steps to make your content as responsive.
1) Create a new responsive project.
2) Copy all the slides from your existing blank project and paste them in the responsive project.
3) You can change the object size, position and other things in tablet and mobile view as per your need.
4) Publish and access it from different devices.
Regards,
Hari

Similar Messages

Blank Projects vs. Responsive Projects

I normally develop using the Captivate Blank Project as my customers are not normally concerned about responsiveness yet. However, I may be soon working for a new customer that may. So, I wanted to know a few things. 1. Can I make a Blank Project Responsive?
2. If so, what is the best way of going about this?
3. If so, would I have to make sure that all graphics were vector graphics?
3. If not and only the Responsive Project format publishes responsive projects, again must all graphics used be vector graphics for the project to be responsive?
Thanks!

Thank you for your quick reply. Another question - With a blank project you are able to set the most desired size, but on my initial look at the Responsive Project, it does not appear to allow a user to select a size. Just takes one into 1024 x 627. Am I missing something with the sizing? Is there another place to set a size other than the 1024 X 627, if desired, or are all of the different screens (Primary, Mobile, and phone set at what's considered a standard, but the responsiveness aspect will allow it to do any larger, smaller, or non-standard size (say 1000 x 700)?

Premiere Pro CC scrambles media in-outs when converting CS5.5 Project

Bit of a strange situation here. Created a project in CS5.5, edited some WAV files on the timeline. WAV files had non-zero starting time codes (they were coming from ProTools).
Opened the project in CC, said yes to conversion.
About 20% of the clips are showing the 'media missing' diagonal bars (5 clips are totally slashed out, and 2 clips have some portion of the beginning of them slashed out). No audio plays during the diagonal bar sections.
One footage item (Part 2.wav) starts at 22;29 and runs to 50;03
An instance of this clip on the timeline has in=33;10, out=40;14, which seems right.
This is all the same in both CS5.5 and CC, but CC shows the slashy bars while 5.5 works fine.
Tried offlining/relinking, etc. With and without "align timecode" checked. No dice.
I can replicate this messed up timeline in a variety of ways:
1) Converting the project from 5.5 to CC by opening it in CC
2) Create a blank project in CC and import the whole 5.5 project, and reconnect media when asked
3) Create a blank project in CC and import just the single sequence, and reconnect media when asked
4) Convert the project from 5.5 to CC by opening it in CC; and then import the whole 5.5 project into the new one again
HOWEVER. Two ways do work:
1) If I convert the project from 5.5 to CC by opening it in CC, and then import just the single sequence from the 5.5 project, the imported sequence works perfectly. It doesn't even bring in its own WAV files - it realizes they're already in the project and draws from them instead. (The converted sequence is still broken, even though the identical imported one is working).
2) Opening the sequence in 5.5, copying the contents of the sequence, and pasting them into a CC project, works too.
I'm stumped - anyone have ideas of experiments to run or things to try?

I think you've got two solutions right there. General wisdom is to only work on new projects in the new version. Finish old projects in the version they were started in.
This is why.

Cannot create blank projects at 1280x720 or above on 10.8.4 Mac OSX.

Every time I create a blank project at these specifications, Captivate stops responding and gives me a perpetual loading symbol. I can't begin to think how to fix this, but it is fairly important that I get this to work somehow.
I'm working on a Mac Pro w/ 6GB of memory, and a 3.33 GHz y-Core Intel Xeon Processor.
I went to support about a month ago for this issue and was told it was a known issue on Mac Pros, but since then I never got any follow up or updates that corrected the issue, so I just sit here hoping this software I paid for will eventually work.

7.0.0.118 is the version I have.
I'm currently running on the admin account for this computer. I remember this was the focus of many a support call, as I was instructed to log out and log in about eight different times just for the issue to persist.
In response to my original support call it was stated "we requested you to enable the root user and then try to create the desired project", though I've had the root user enabled and am currently operating with it enabled and it has made no difference.

Can I convert my VBA project to some sort of batch submitted executable

Thanks to the help from you all, I have written VBA macros that open huge word documents and pluck out specific information and put it into Excel. The files I've received have grown in size from 1500 to 3500 pages. I'm currently running the VBA
macros by opening the document in word and then clicking "View....Macros...mymacro....Run. The macro then runs for any where from 10 minutes to 2 hours.
Is there a way I can convert my VBA project into some sort of executable so that I can "submit" the word file to the executable? Sometimes I run this on a term server. I'd like to start the job, log off the term server, and then later
check for the resulting excel file.
Is there a way to queue up a list of input files for this?

Hi Denis Backer,
>>Can I convert my VBA project to some sort of batch submitted executable<<
Yes, it is possible. We can write an application to automate open the Word documents and run the macro using
Application.Run. Also we can convert all the VBA project with mange code, however the Office automation is not supported on the server enviroment.
Microsoft does not currently recommend, and does not support, Automation of
Microsoft Office applications from any unattended, non-interactive client
application or component (including ASP, ASP.NET, DCOM, and NT Services),
because Office may exhibit unstable behavior and/or deadlock when Office is run
in this environment.
You can get more detail about it from link below:
Considerations for server-side Automation of Office Print Print Email Email
And here are two helpful links about Office automtaion using C# for your reference:
C# app automates Word (CSAutomateWord)
How to automate Microsoft Excel from Microsoft Visual C#.NET
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
That is a really curious disclaimer considering the number of options for automation Microsoft itself integrates into its products.

How to convert my NTSC project to PAL?

Hi! I'd like know how i can convert my ntsc project into PAL.
I need finish a DVD for my client take to ANGOLA and there is PAL system.It is possible? My Encore is 2.0.
Or It is possible put my NTSC movie into PAL project and let encore transcode the movie? Thank you very much and sorry my english.

You have several options.
1 - Create a new PAL project in Premiere Pro. Capture your footage in the usual manner, and as soon as it is in the project, hit the ENTER key to render it.
2 - Create an NTSC project in Premiere Pro, capture to NTSC DV footage, and export it out again.
Close project.
Create new PAL project, import the NTSC clip & then interpret/conform the footage to the project settings.
3 - Set up an NTSC project, capture footage, export to PAL DV or MPEG-2 from Premiere.
4 - Use TMPGEnc Xpress 4 - it's standards conversion is very good.
5 - Use ProCoder, as Ruud suggests
6 - Use CCE SP if you have it.
I'd try as many different ways as you can, and view the lot to see what looks the best.

[svn:osmf:] 16580: Converted classes and project files to work in flex 3.5

Revision: 16580
Revision: 16580
Author:   [email protected]
Date:     2010-06-16 17:08:07 -0700 (Wed, 16 Jun 2010)
Log Message:
Converted classes and project files to work in flex 3.5
Modified Paths:
    osmf/branches/zeri-certification/Test_Apps/FlexUnit4/.actionScriptProperties
    osmf/branches/zeri-certification/Test_Apps/MediaTests/.actionScriptProperties
    osmf/branches/zeri-certification/Test_Apps/MediaTests/html-template/history/history.js
    osmf/branches/zeri-certification/Test_Apps/MediaTests/html-template/index.template.html
    osmf/branches/zeri-certification/Test_Apps/MediaTests/src/InstructionsForm.mxml
    osmf/branches/zeri-certification/Test_Apps/MediaTests/src/MediaTests.mxml
    osmf/branches/zeri-certification/Test_Apps/MediaTests/src/ZeriTests.mxml
    osmf/branches/zeri-certification/Test_Apps/Zeri_Custom_Player/.actionScriptProperties
    osmf/branches/zeri-certification/Test_Apps/Zeri_Custom_Player/html-template/history/histo ry.js
    osmf/branches/zeri-certification/Test_Apps/Zeri_Custom_Player/html-template/index.templat e.html
    osmf/branches/zeri-certification/Test_Apps/Zeri_Custom_Player/src/Zeri_Custom_Player.mxml
    osmf/branches/zeri-certification/Test_Apps/Zeri_Custom_Player/src/comps/LogBuffer.mxml
Added Paths:
    osmf/branches/zeri-certification/Test_Apps/MediaTests/html-template/AC_OETags.js
    osmf/branches/zeri-certification/Test_Apps/Zeri_Custom_Player/html-template/AC_OETags.js
Removed Paths:
    osmf/branches/zeri-certification/Test_Apps/MediaTests/html-template/swfobject.js
    osmf/branches/zeri-certification/Test_Apps/Zeri_Custom_Player/html-template/swfobject.js

Hi for anyone getting similar issues,
the solution is described in http://forums.adobe.com/message/3302944#3302944
This is not a bug.
Arnoud

How to adapt Marty Hall's jsf-blank project to WebSphere 7?

Marty Hall had a great idea for getting your feet wet in JSF2: He provides a project named jsf-blank that you deploy in Eclipse on a Tomcat container.
In 10 minutes you are running a JSF 2 project!
How can I deploy this jsf-blank project on WebSphere 7? I tried a quick-and-dirty, but it seems to fail on mapping.
Thanks
Eli

How can I deploy this jsf-blank project on WebSphere 7?There just isn't an easy way out. The project should deploy with no problems of Websphere is truly compliant - if something fails then you have no choice but to try and figure out what exactly it is that Websphere doesn't like about the deployed application. It might be a configuration issue, it might be a JVM issue, it might be a rights issue, who knows.
If you want further help then you might want to try and post the errors you are getting.

How to convert an NWDI project into a Local project?

Hi Experts,
Please tell me " how to convert an NWDI project into a Local project? "
If you c

Hi Srini
1. Copy/Paste Webdynpro components in the new project as was suggested before
2. Or create new project, copy _comp folder from old project to the new one. But, do not forget to update .dcdef & .project files manually after this. You have to set the correct project name in .dcdef and set the correct local project path in .project.
BR, Sergei

Every time I convert a CVI project to Visual C++(6.0) project, there are errors: easyio.fp, fieldpoint.fp,niimaq.fp

Every time I convert a CVI project to Visual C++(6.0) project, there are errors:
Wizard was unable to locate the following function panel modules referenced by your project: easyio.fp
Wizard was unable to locate the following function panel modules referenced by your project: fieldpoint.fp, niimaq.fp
what's the problem?

Every time I convert a CVI project to Visual C++(6.0) project, there are errors:
Wizard was unable to locate the following function panel modules referenced by your project: easyio.fp
Wizard was unable to locate the following function panel modules referenced by your project: fieldpoint.fp, niimaq.fp
what's the problem?

Converting RoboHelp7 FlashHelp project to RoboHelp8

Hi! Was looking for some best practices regarding converting existing help projects (FlashHelp) from RoboHelp 7 to RoboHelp 8. What you need to copy down so that you can verify and if necessary, recreate in RH8. Also, what major differences in just basic functions should I be aware of?
Reason I'm asking is because I've been doing some testing and have noticed that my some of my applied styles are not coming across correctly. Normal style is being changed from Verdana 9pt to Times Roman 12pt. Numbered lists have 12pt Times Roman numbers and rest of paragraph is Verdana 9pt.
In the attached css file, I'm seeing Kadov styles, which is strange because this project was created in RH7.
In addition, the ftp information that I had set up in the Primary Source Layout did not get copied over into RH8. Is that common because now I have to make sure that I've got it all copied down (which I do) but it would have been nice if it just imported during the conversion.
Another thing that I noted in the Primary Source Layout window after I converted my project was the "enable substring search" check box. Selecting this check box seems to really slow down the generation of my project when it gets to the Full Text Search process.
So basically, I'm asking for a handy-dandy checklist of what to check before you convert and things to review after the conversion.

As you realise, RH7 CSS files should not have kadov so my guess is somewhere along the line, a backup from an earlier version got applied and missed the upgrade. Doesn't really matter how, we are where we are.
First make a backup of the CSS that you posted and then strip out all the kadov definitions so that you can see the definitions that apply. That should not affect the output as it is now but at least you will be able to read the CSS.
Where normal is showing as TNR, look at the HTML. Is the <P> tag applied?
The list problem is because no font is set for the OL tag.
You also have two definitions of the P tag, maybe others with a conflict?
Your CSS needs a tidy up as the first step. Try Top Style, there is a free version and it is widely regarded as THE editor for CSS files.
I don't think we lost our publish details but we don't use them with FTP.
I am not surprised the sub-string search takes longer. It has more work to do would be my guess. Only Adobe can confirm that. I haven't seen anyone else comment on the additional time.
Handy dandy list? Sorry it doesn't work that way. Every project and author will be different so what might affect one will be OK for another. It's trial and error.
See www.grainge.org for RoboHelp and Authoring tips

Convert Trailer to Project on iMovie

How do you convert an iMovie trailer to a project on the iPad? I want to use photos instead of videos, but since the trailer doesn't allow photos I have to convert to a project. I'm fairly new to iMovie and the iPad, so any help or advice/tips is appreciated. :)
P.S. This is for a book trailer I have to make for a school project.

Anybody? Would like to convert trailer to project using imovie on ipad2. Can this be done?

Converting cs3 Flash Project ( .flp ) to cs4 Flash Project

hello;
I have attempted to convert an old .flp to the new system, according to Flash Help instructions; but when I do, the new converted Project is nothing more than navigation-panel of the directory that contains the project ( .flp );
old .flp's were not directories, but collections of pertinent files, in a relational tree structure that I put together for ease of authoring, such as a bunch of .as files and a few .fla files that might be associated with one_module of a larger app , where...
some of those .as files might be coming from my papervision directory,
some from my personal as3 library,
and some from a local_directory
thus I have .as files coming from distant places on my computer, and a .flp allows me to put those pertinent .as files into one quick collection; an old .flp might look like:
my_project
- module_1
-- A.as ... located in C://.../.../..././//././././/./../././../?
-- B.as ... located in C://../../.././../././././././././.../...//./../?
-- C.as ... located in the same directory as the .flp
-- A.fla
- module_2
-- A.as
-- D.as
-- E.as
-- F.as
- generic_stuff
according to the new approach ( as I currently understand it ) an entire directory structure(s) - with all the crap that gets dropped into directories while building an app - is the definitive aspect of a Project; furthermore if there are files that are not included in that directory that I want included in the Project, I will have to also include the entire directory that includes that file ... when all is said and done my Project will consist of 30% of all of the crap that is on my computer ... I only wanted 15 or 20 files;
consider:
project_root_dir/sub_dir_A/sub_dir_B/sub_dir_C/pertinent_file.fla
project_root_dir/sub_dir_A/sub_dir_B/sub_dir_C/non-pertinent_readme.txt
now if I want to quickly open pertinent_file.fla, I have to use the Project panel to navigate down through 3 directories ... but I do that using Windows, so the Project panel has not really helped me;
and I surely do not want a bunch of clutter, like a readme.txt, included in a project, though I do want that readme in the directory on my computer ... but not in the Project;
am I missing something?
thanks,
dsdsdsdsd

Nice episode Paul,
I saw it on http://tv.adobe.com/watch/flash-downunder/converting-a-flash-project-to-air/
you mention the fireworks Icon script in it that makes the relevant size png files.
Can you paste a link where to get it and if it is good for cs6
Thanks

Help needed converting 2 Captivate projects...

Hi,
I have troubles with Captivate (another post on this forum) and was wondering whether someone would be willing to help in converting 2 captivate projects to .swf?
I can provide a link to the files.
Help wpuld be appreciated.

Hi there
I'll try to help.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Converting old imovie projects

Hi,
I just bought a new imac and used migration assistant to move all my files from the old mac. When I look in the movies folder I see all my old movies from my old mac however when I open imovie, there sees to be no "open" command under the file menu. It seems to only list projects that were created in this version. When I goto the movies folder and double click on one of the old files, the mac asks me what application to open it with? Is there a way to convert these old projects??
Thanks
Joe

When I look in the movies folder I see all my old movies from my old mac however when I open imovie, there sees to be no "open" command under the file menu. It seems to only list projects that were created in this version... Is there a way to convert these old projects?
Correct. iMovie '08 is a completely new application using a totally different method of storing source and project files. You cannot open your "original" files as such but can "import" projects produced by previous versions of iMovie to some degree. (I.e., it can only import source clips with compatible transitions but no "special effects." You will find this option under the "File" menu. (You can also import source clips, as well as, rendered transitions and special effects or the entire timeline without "tween" tracks manually or an exported version of the timeline if you so desire.)
When I goto the movies folder and double click on one of the old files, the mac asks me what application to open it with?
The project file is set to open in your previous version of iMovie which it appears you may not have been "migrated" to your new computer. iLife '08 does not restrict your use of iMovie '06 along side of iMovie '08. Had you installed the application yourself, your old version would have been moved to a folder entitled "iMovie (previous version)" so you could continue to use it. Since iLife '08 is already present, you can download a free copy of iMovie v6.0.4 at the following URL:
http://www.apple.com/support/downloads/imovieHD6.html

Convert a blank project to responsive project

Similar Messages

Maybe you are looking for