Convert .caf into .mp3

Hi
I have a problem with converting a CAF file into a MP3 file. I used the SpeakHere example and want to send this file. But I didn't figure it out how to convert this into mp3. According to the iPhone Dev docs there's no mp3 functionality...
Does anybody know how to convert it?
Thanks and Regards

You can play mp3s in the simulator but they won't work on the device. If you really want to convert from a .caf, just use the export function of Quicktime.

Similar Messages

  • New iTunes 4.9 doesn't convert .mpg into .mp3 or aac ?

    hello support!
    I'm a producer in a german radiostation. we're working with soundfiles saved in .mpg files (mpeg1 audio). In past (with version 4.8) it was possible to import that files into itunes and convert it into mp3 or aac. Now, with that new podcast version, it doesn't work. If I try, I get an unknown error "(-50)". does anyone know about this problem?
    and another question: why does itunes play that .mpg files without any problems and ipod doesn't ???
    greetz
    dennis

    Dennis,
    What I did:
    1) I bought apple quicktime pro do not follow me in this it won't help you.. I got angry and at the apple store they said I would get my money back because I asked them BEFORE I bought and they said it would work. It doesn't
    2) I downloaded MPEG streamclip (free) at http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
    AND....
    It works! You do not need to buy the Apple quicktime MPEG 2 component rubbish, you do not need it if you convert just audio!
    I have MP2 files with 384 kbbs and I was looking a bit odd when they showed up as 192 kbbs but that is per stereo channel so the total comes to 384 again.
    I transferred the files into AIFF and it works I do see a conversion into AC3 is that AAC? well if you can convert to AIFF you can use iTunes again to convert to AAC or MP3!
    so now you can do the job! I am now, after a few hours, again back to start to work..... thanks iTunes boys!
    there is another app at http://www.dekorte.com/projects/shareware/SoundConverter/ is seems to do the job as well but it'll cost you 10 dollar. And I do not know if it is as good as the free app...

  • Converting iTunes into MP3 file

    Hey everybody,
    OK, I've purchased music from iTunes store. I want to convert them into mp3 so I can download them into my Palm t/x. But I keep getting the same message telling me that the song is "protected and cannot be converted." Is there any way to get around this? Thanks for any help.

    Thanks so very much that worked like a dream...now I have to buy another card...The one I have just doesn't have enough memory ;o)

  • CAF into MP3: Logic can't do it

    Jjust would like to know why if I import a CAF file into logic and I want to convert it in MP3 it can't do it.
    I tried also to convert first the CAF into AIFF and the into MP3. It can't.
    Simply the MP3 option doesn't appear (it appears normally with others AIFF files)

    Why not import the CAF and bounce it out as an Mp3, same difference.

  • Convert wma into mp3 ?!?

    Hello, I was wondering if anyone can help me : I know that easy WMA is able to convert WMA songs into mp3, but since I Have upgraded my OS to the Tiger version ( 10.4.4 ) this nice application doesn't work anymore. Is there anyone who knows a good free program that will allowed me to convert WMA songs into MP3 ?
    Thanks in advance
    Marco

    Try ffmpegX.

  • I don't see an option to convert caf to mp3, when I export... thoughts?

    I open a CAF file in Quicktime Pro and I wanted to export it as an MP3.
    I didn't see an export to MP3 option, so I exported the file to a WAV file then converted that to MP3.
    Any ideas how I can export directly to MP3?
    I may have missed when I was looking for this...
    Thanks..

    I found a bunch of Apple Loops from an old iLife install that used the Core Audio Format.
    Thanks for the heads up—I think I located them. Managed to find one 2 sec file online, but it was an old IMA 4:1 audio format. In either case, I can only convert the .caf files indirectly using built-in Mac OS X software as follows:
    1) Open the .caf file in either QT X or QT 7 Pro and export. (I prefer the QT 7 Pro "Sound to AIFF" option.)
    2) Open the exported file in iTunes and convert to MP3 for file management to compatible devices.
    3) Delete intermediate and/or sources file(s) if not wanted.

  • Garageband volume problem after converting project into mp3 formats

    Every time after I convert my music project into MP3 by clicking "send song to i-tune" in GarageBand, the volume of the music always come out to be softer than the original project before its been converted. Is there something I could do to fix that or to boost up the volume after I convert it?

    Boattt wrote:
    Is there something I could do to fix that or to boost up the volume after I convert it?
    http://www.bulletsandbones.com/GB/GBFAQ.html#exportvolumetoolow
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Converting .caf to .mp3 . . . . I get a dash (-) before the .mp3?

    I have been converting .caf music to .mp3 using a preset made from the "Podcasting" preset.
    However, whatever is in the name field in the Inspector appears before the .mp3.
    Originally I called my preset "MP3 Audio" and when I converted say, "Night Music.caf" I ended up with "Night Music MP3 Audio.mp3"!!!!
    I then deleted the title of my preset, which improved matters but I was still left with a dash making the file look like "Night Music-.mp3"
    What must I do to just get "Night Music.mp3"?

    You can take this a step farther if you'd like by setting your new custom destination as the default destination for your setting.
    Select your setting, then click the actions tab in the inspector. The default destination can be changed there. This would save you the extra step of changing the destination on each batch, if you're using the same destinations.
    http://dl.dropbox.com/u/19589/Compressor%20Default%20Destination%20Setting.png

  • Convert midi into mp3

    I am using iTunes 9.2.
    I want to convert a midi-file into mp3.
    I found the function "convert to mp3", iTunes, however, does not accept the midi-file.

    moin moin aus Hamburg !
    maybe [_*MIDI to MP3 Converter for Mac*_|http://www.maniactools.com/soft/midi-to-mp3-converter/index.shtml] can help ?
    JGG

  • Convert AAC into mp3 files?

    Hi all my music is in i tunes and I want to put some onto a 2 gb memory stick so that I can play it in my cay unfortuantly it only accepts MP3 files does any one know how I convert them .
    Many Thanks

    Yes. When you convert them to MP3s the original AAC versions will still be in your library as well.  Anyways, once they have been converrted, locate these newly converted tracks on your HD and copy them over to the memory stick.
    B-rock

  • How to convert flv into mp3 -- please help!

    hi,
    i'm very new to using videos in flash. i uploaded a video into flash in order to add texts to it to upload later to web. my problem is converting the fla file to mp3. i tried the video encoder but i'm stuck. please help if you can..it'll be very much appreciated. thanks!

    i think i see where the problem lies. the file i worked on in flash (i inserted some texts into the video) are saving as .fla. how do i get it to change to flv in order to use the service you suggested? thanks a bunch!

  • Convert Audio into MP3

    I've got two 45min audio files that I'd like to compress/convert to MP3 files. In compressor I chose AAC Audio High Bit Rate High Quality DL. What I got was a 60 mb MP4 QT file which I took into iTunes to convert into an MP3, bringing my file down to 52 mb (down from 500+ mb)
    A couple of questions: Is there an easier way to do this and is 52 mb a good size for a 45 min stretch of VO? I've got solid quality at this point. I'm sure I could shave a few MBs. How do they get a Harry Potter audio book into a reasonable download???
    Thanks - Gene

    Stereo or mono? AAC will give you very good quality at 64Kbps mono, and good quality at 32Kbps or even slightly lower. The latter would give you about 4KB/s which means 45min x 60sec/min x 4KB/s = 10800KB = 10.8MB for mono with a 45 minute recording. In any case, AAC should give you better quality per byte than does MP3. However, MP3 is a more widely used and a more PC-compatible format. Of course, you need to double those data rates if you want to use stereo and maintain equivalent quality.
    You can also gain some control over the quality by adjusting the audio's sample frequency (or sample rate -- the approximate values 8KHz, 11KHz, 22KHz, 32KHz, 44KHz, and 48KHz being common). If you want the best quality make certain that the sample rate you choose for the encoding matches that of the original recording or that it is a simple integer ratio below the original (thus "good" ratios from 44KHz would be 22KHz and 11KHz, or 1/2 and 1/4 the original).
    Note, however, that if you use lower bit rates (e.g. 32Kbps) for the encoding you may be limited to lower sample frequencies (e.g. 22KHz), which is okay as long as the resultant quality is good enough. The encoder may also force fixed limits on the bit rate depending upon the requested sample rate (and vice versa).
    It also depends upon what the source material is -- spoken word, music, etc. -- since you can probably use a higher compression rate (smaller output file) for plain spoken word.<small><hr width="75%"><small>If this suggestion helps in any way, a confirmation or acknowledgment would be appreciated, since that would also help others who may be having the same difficulty. Do for others as you would have them help you.<center>Thanks for sharing, Waymen.</center></small>

  • I have the new version of itunes and i cant find where i can convert my songs into mp3s... anyone know where?

    can someone help me find where the tab is for converting songs into MP3's... my copnmputer just updated iTunes and i cant convert them... i need these songs in that format and i cant find it anywhere... help!

    iTunes prefs > General - Import settings button.
    my copnmputer just updated iTunes
    Really? This option was changed in iTunes 8, about 4 years ago.

  • Wave not converting into MP3

    I have been sent a wave file that is 2:47 in length. When I convert it into MP3 format it only converts half of the file and it is 1:30 in length??  I have tried many time but I keep getting the same result.  Is it because the file is too big? 

    Hey Limnos: 
    I'm not sure if the WAV is mono or stereo.  While it did actually convert, the MP3 fades out at 1 min. 30 sec.  It is a song being mastered for a CD so I am figuring that the WAV is stereo.  There are 10 songs on the CD and all of the WAV files converted to MP3 with the exception of two. Both fade out in the middle of the song.  The bar indicates that this is the end of the song.  So, in fact it converts about half the song. The actual song is 2 min. 47 sec.  The sound technician says that some of the files are huge and perhaps they are just too big to convert. I'll be getting the actual audio master on Monday so we will test it on every media for corruption.   Very strange however as I have not had this problem before. 

  • How do i convert a voice memo into MP3 with itunes 12?

    I need to convert a voice memo into MP3 with itunes 12.

    Today, I emailed myself an .m4a voice recording from an Android smartphone that had created that sound file minutes earlier.
    After opening that email message, I saved the .m4a sound file (a whopping 352 KB) to my Mac (iMac 21.5 inch running Yosemite).
    Clicking on the sound file's icon launched iTunes (version 12.0.1.26), which then did nothing no matter what I tried.
    However, when I selected the file on the desktop and navigated to the Finder/File/Open With dropdown window, a dialog box opened with alternative applications to use for opening the sound file. The available applications shown were VLC, QuickTime Player, Flip Player, and RealPlayer. I was pleased to find that VLC, QuickTime, Flip Player, and RealPlayer each opened and played the file straightforwardly and flawlessly.
    Apparently, Flip Player Pro (which I do not own) has a "save as" feature that might help you convert the file to the format you desire.

Maybe you are looking for

  • Audio disappeared on several timelines in project. How do I get it back?

    I am working on a project that I started in CS4 and continued in CS5 after the upgrade.  At first I had to do a lot of re-linking for some reason, but most everything works fine.  However on 3 of the 6 timelines the audio is gone.  It shows up as a s

  • Improving performanc​e.

    Before i wiped my computer, i was able to get 60 frames or higher all the time in a game called Guild Wars. Since then im lucky to get 30. Ive closed start up programs, and requested help by email and nothing seems to help it. I was told to do memory

  • FTXP-error-Domain MWART fixed value  does not exist- Message no. F4341

    Hi, I am trying to created a new record for a tax code, and i get this error Domain MWART fixed value  does not exist Message no. F4341 I looked up OB40, and not sure how to fix this. Do you know how to check the tax codes? How to validate OB40? Than

  • Why a " # " is coming while printing chinese characters from SAP script?

    Hi All, Facing one issue. We have a SAP script for printing delivery note thru T-code VL03N. The script has chinese characters in it. When I print this form the chinese characters that are hardcoded in the script can be seen in the print out but the

  • Cannot see NAS on my local network by its name (Linksys EA4500)

    Hello, I have just bought a new EA4500 and set it up at home. Most things worked like a charm except one. I can no longer see my Synology NAS on my home network byt its name. I have the router connected to internet (local ISP, PPPoE). I have the NAS