Convert Calendar database file to importable iCal file

For reasons which would take waay too long to describe here, I find myself in a situation of having to import an iPhone calendar file (Calendar.sqlitedb) into iCal. I've saved the iPhone file to my Mac desktop.
I was flabbergasted to find that this is not one of the formats iCal is designed to import! I found an application (iCal2SQlite) which goes the other way, but I can't find anything which goes the way I'm needing.
Does anyone know of a way to convert an SQ Lite database file into something iCal can import?
Many thanks!

Dogger, I wish I could help, but I searched for days on this, and posted both here and on the iPhone discussion, but I didn't find a solution. I also went to the Genius Bar at the local Apple Store. No luck there, either.
I ended putting the events in by hand from 1/1/09 on...but I lost everything prior to that (although I still have the calendar database file on my Mac).
Definitely an oversight on Apple's part, I'd say...

Similar Messages

Convert iPhone calendar file to importable iCal file

For reasons which would take waaay too long to describe here, I find myself in a situation of having to import an iPhone calendar file (Calendar.sqlitedb) into iCal. I've saved the iPhone file to my Mac desktop. The iPhone file is an SQ Lite database file.
I was taken aback to find that this is not one of the formats iCal is designed to import! I found an application (iCal2SQlite) which goes the other way, but I can't find anything which goes the way I'm needing.
Does anyone know of a way to convert an iPhone calendar file into something iCal can import (like maybe an Outlook calendar file)?
Many thanks!
(P.S. Just so you know...importing the iPhone file into iCal is the ONLY option I have. As I said, it would take too long to explain why that is...but unfortunately that's the bottom line.)

Dogger, I wish I could help, but I searched for days on this, and posted both here and on the iPhone discussion, but I didn't find a solution. I also went to the Genius Bar at the local Apple Store. No luck there, either.
I ended putting the events in by hand from 1/1/09 on...but I lost everything prior to that (although I still have the calendar database file on my Mac).
Definitely an oversight on Apple's part, I'd say...

When I try to import files from iMac HDD into the event, it fails. FCPX dosn't see this files for import. Files are *.m2ts and *.mpg. Should I buy plagin Quicktime component MPEG-2 to resolve a problem?

When I try to import files from iMac HDD into the event, it fails. FCPX dosn't see this files for import. Files are *.m2ts and *.mpg. Should I buy plagin Quicktime component MPEG-2 to resolve a problem?

no you should transcode those files into an format that os suitable for editing. Like proRez. Although you might need some Flip4Mac or perian or something to do the conversion.
adam

Imported iCal files - can't edit

Hello
My MBP is running Mountain Lion, and if I export an event from my Facebook to iCal I can't edit any aspect of it. I can accept or reject an invite, but that's as far as it goes. It also happens if my flying school emails me an iCal thingy, so it must be something to do with the import process.
I'm using my Gmail calender, synced between the Mac and my iPhone 4S (iOS 5.1.1) and I can't edit or delete on there either.
Any help?
Thanks

petesteck wrote:
I created a website a about a year ago and I need to update it. I created it on my girlfriends account and went to open iWEB on her computer and my site is no longer there. My site loads fine and the web address is still working. However I cannot find the files in iWEB to edit the site. Please help!
I went to the index file and found most of the stuff there. How to I open all my previous work back in iWEB so I can edit the site???
iWeb stores its files in a "domain" file. The file is located in your user Library -> Application Support -> iWeb Folder.
Unless it has been moved or deleted, it should still be there. Double click it and see if it launches with your data.
If it's been moved somewhere, you'd need to find it.
However, if the domain file you were using has been deleted and not backed up somewhere, you would need to start from scratch.
Good luck!
(I see Old Toad posted his response while I was still writing mine!
Message was edited by: MattiMattMatt

Trouble getting audio files when importing R3D files into CS5.5 Prem Pro

Importing R3D files into Premiere Pro CS5.5 works for Video but the audio doesn't convert properly.   There is an audio file included in the R3D file that PP can see but it just has a few spikes.
This same file played in REDcine-X plays the video/audio just fine.   Is there some audio setting in Premiere Pro that I should be setting?
Oddly enough if I use REDcine-X to output a RED Trim file and then import it into PP, the audio file is shown separately and is imported correctly.   This of course involves a file conversion step in the workflow and a step that we are hoping to avoid.

In order to import all kinds of r3d, we had better convert it to adobe more compaitble video format like dv, mpeg, avi
You may refer to the following step by step guide on how to convert .r3d movies at Convert R3D to ProRes, MOV, AVI, MP4, WMV, 3GP, MKV
The guide applies to:
Convert R3D to ProRes 4444, 422, 422 (HQ), 422 (LT), and 422 (Proxy) to fast import any version of Final Cut Pro or Final Cut Pro X.
Convert R3D to MOV, MP4 to import R3D to iMovie for easy editing or to play R3D in QuickTime, iTunes, iPad, iPod, iPhone, Apple TV.
Convert R3D to AVI, WMV, MPG to edit R3D in Avid, Adobe Premiere, Sony Vegas, Windows Movie Maker or play R3D in Windows Media player, Xbox 360, Microsoft Surface.
Convert R3D to FLV, WebM, H.264, MP4 for upload R3D video files to YouTube
Convert R3D to DV, VOB, ASF, SWF, RM, 3GP, OGV, FLAC, OGG, MP3, WAV, WMA, AC3, AIFF, WMA and etc.

To read dump file without importing dump file

Hi All,
I want to check table data from dump file without import utility.
how can i open dump file in oracle 10g release 2 version.
Thanks in advance.

user647572 wrote:
Hi All,
I want to check table data from dump file without import utility.
how can i open dump file in oracle 10g release 2 version.
Thanks in advance.You cannot open the oracle dumpfile . Though you can see it bu simply using the import utility .(actually data is not imported it show the sql only .)
In datapump , use parameter sqlfile=abc.sql
e.g; impdp scott/tiger@orcl directorory=dpump sqlfile-abc.sql dumpfile=xyz.dmp and logfile=xyz_log.log full=y
in case of original import use the parameter "show"
e.g; imp scott/tiger@orcl file=abc.dmp show=y log=abc_log.log full=y
hope this help u ..
--neeraj

Sync files - already imported local files in DW, what next?

Hi,
I've already imported my files from my local device in Dreamweaver (DW). Now I have copied the whole material in the Sync file map from Creative Cloud. But the files are still the same in my DW and set to my local files on my computer. What can I do next?
A) delete the files in DW (from my local) and then import the ones from my sync map (Creative cloud map) ?
or
B) don't do anything it's a connection... Everything I change in my local files also changes in my Creative cloud map ?
Thanks!

I have no idea what you are describing. What files are you "importing" and what do you mean by "importing"?
To use DW to build a website, one would need to complete each of the following steps:
Install DW on a local computer
Start DW and using DW's Site manager menu option, define a local site (i.e., tell DW where you want your local files stored) and a remote site (where the files will eventually be placed so that they can be seen on the web
Use DW to create your HTML pages
Save the pages within your local site in a folder hierarchy of your choice
Upload the final files/images/dependent files to the remote site
Where are you on that list of things?

How to get the Path of the Current File using Import & Export File -Reg.

Dear all,
I have a mega (big) doubt. I have manually inserted the Figures from the figure folders. Now i need, fully automated. So How can I get the Figure path
Example :
PMString path = "E://development/Figures/";
now i checked, How many subFolders is there in "path", get the All Subfolders and check to the Article Name.
Example
Article Name == subFolder name then get the Files from the SubFolders(E://development/Figures/ChapterF/*.eps files").
now I paste the Document using to For Loop.
Please any one can suggest me, How can We get the Path in SDK.
Note:
Should I have to create the relative path by myself?
No method supplied in SDK to do this directly?
Please I need a help of this Query as soon as posible.
Thanks & Regards
T.R.Harihara SudhaN

http://msdn.microsoft.com/workshop/author/dhtml/reference/objects/input_file.asp?frame=true
When a file is uploaded, the file name is also submitted. The path of the file is available only to the machine within the Local Machine security zone. The value property returns only the file name to machines outside the Local Machine security zone. See About URL Security Zones for more information on security zones.
i need to know on how to get the compelete path /directory of the filename
using <input type="file"> tag You can't. Its a security thing.
is there any other way to get an input file from a local host aside from <input type="file"> tag?No. Not using just html.
You could always go into activex components, but thats different again.
Cheers,
evnafets

How to import a doc file which is a file created by using the codings?

Hai to all....
i'm now trying to import a word doc file which is created by using the
CreateFile() method in Win32 Programming....
When i manually created a doc file and import that file using the
PlaceFileInFrame method.... the contents of the doc file is placing in
the document perfectly...
But when i'm trying to create a doc file using CreateFile() method and importing it... and use the PlaceFileInFrame method... its not placing the
contents of the file...
i will show u the codings what i had done...
HANDLE hFile;
DWORD wmWritten;
//FOR CREATING A DOC FILE....
hFile = CreateFile(L"C:\\tab.doc",GENERIC_READ|GENERIC_WRITE,
FILE_SHARE_READ,NULL,OPEN_ALWAYS,FILE_ATTRIBUTE_NORMAL,NULL);
//FOR WRITIND DATA INTO THAT FILE FROM row[2] IN A MYSQL DATABASE
WriteFile(hFile,row[2],(DWORD)(strlen(row[2])),&wmWritten,NULL);
CloseHandle(hFile);
//USED PLACEFILEINFRAME METHOD FOR PLACING THE CONTENTS OF THE DOC FILE
tempfilename="C:/tab.doc";
target = "/" ;
replace = "\\" ;
s.Replace(tempfilename,target,replace);
IDFile idFile;
idFile.SetFileName(tempfilename);
UIFlags uiFlags = K2::kMinimalUI;
UIDRef ref = layoutHelper.PlaceFileInFrame (idFile,placeUIDRef,boundsInParentCoords,
uiFlags,
kTrue, //retainFormat
kTrue, //convertQuotes
kFalse, //applyCJKGrid
NULL);
But the import is failed...
When i manually created a doc file and import that file using the
PlaceFileInFrame method.... the contents of the doc file is placing in
the document perfectly...
Is there any ImportProvider or ImportFilter available for
importing this type of written files?
Can any one plzz explain me?
thanks in advance..
senthil

Hai Oscar, Now i'm trying like this for importing XML files... ---------------------------------------------------------------------- IActiveContext* activeContext = snpRunContext->GetActiveContext(); UIDRef documentUIDRef = ::GetUIDRef(myContext->GetContextDocument()); tempfilename="C:/1.xml"; target = "/" ; replace = "\\" ; IDFile idFile; idFile.SetFileName(tempfilename); IDataBase* db = documentUIDRef.GetDataBase(); InterfacePtr<IDocument> document(documentUIDRef, UseDefaultIID()); ASSERT(document); if(!document) { break; } InterfacePtr<IXMLReferenceData> xmlReferenceData(document, UseDefaultIID()); ASSERT(xmlReferenceData); if(!xmlReferenceData) { break; } XMLReference xmlRef = xmlReferenceData->GetReference(); InterfacePtr<IIDXMLElement> element(xmlRef.Instantiate()); ASSERT(element); if(!element) { break; } InterfacePtr<IK2ServiceRegistry> serviceRegistry(gSession, UseDefaultIID()); ASSERT(serviceRegistry); InterfacePtr<IK2ServiceProvider> xmlParserServiceProvider (serviceRegistry->QueryServiceProviderByClassID(kXMLParserService, kXMLParserServiceBoss)); ASSERT(xmlParserServiceProvider); if(!xmlParserServiceProvider) { break; } InterfacePtr<IXMLAccess> access(xmlParserServiceProvider, UseDefaultIID()); ASSERT(access); if(!access) { break; } // -precondition InterfacePtr<ICommand> importCmd(CmdUtils::CreateCommand(kImportXMLFileCmdBoss)); ASSERT(importCmd); InterfacePtr<IImportXMLData> importXMLData(CreateObject2<IImportXMLData>(kImportXMLDataBoss)); ASSERT(importXMLData); if(!importXMLData) { break; } importXMLData->Set(db, idFile,kInvalidXMLReference, kSuppressUI); InterfacePtr<IXMLImportOptions> docXMLOptions( document->GetDocWorkSpace(), UseDefaultIID() ); ASSERT(docXMLOptions); if(!docXMLOptions) { break; } InterfacePtr<IXMLImportOptions> importXMLOptions(importXMLData, UseDefaultIID()); ASSERT(importXMLOptions); if(!importXMLOptions) { break; } importXMLOptions->Copy(docXMLOptions); InterfacePtr<IPMUnknownData> pmUnknownData(importCmd, UseDefaultIID()); ASSERT(pmUnknownData); if(!pmUnknownData) { break; } pmUnknownData->SetPMUnknown(importXMLData); CmdUtils::ProcessCommand(importCmd); --------------------------------------------------------------------- But it showing the following 2 errors... error C2065: 'snpRunContext' : undeclared identifier error C2227: left of '->GetActiveContext' must point to class/struct/union type is ''unknown-type'' Then i tried to declare snpRunContext like this... InterfacePtr<ISnpRunnableContext>snpRunContext(parentUIDRef,UseDefaultIID()); its sucessfully compiled... But the output is not coming... Its showing unhandled exception in the line IActiveContext* activeContext = snpRunContext->GetActiveContext(); So, what shal i do for declaring snpRunContext... plz give me an idea... thanks. senthil.

Where are iCal files stored

I’m using iCal 2.0.3 with OS 10.4.5 and wanted to better understand where the files are stored. Under the help files it says iCal files are stored under home/library/Calendars. While that was the case under 1.5 it doesn’t seem to be true now. Is that an error in the help file? And how does the files structure work?

That apparently is an error. You'll find the files here:
Macintosh HD:Users:<username>:Library:Application Support:iCal
The Sources folder at that level contains individual files associated with specific calendars. In general terms, these files are sets of BLoB—or Binary Large Object—files each named corestorage.ics, accompanied by an index file, an info.plist file and in the case of a subscribed calendar, a properties preference list.
In the case of the auto-generated Birthdays calendar where the source data is the Address Book, there is no BLoB file: the data is stored externally in a file named com.apple.ical.sources.birthdays.

Importing RAW files with keywords from Bridge

Hi everyone,
I downloaded the trial version of Aperture and have now imported RAW files (Canon 20D) with keywords and IPTC data applied via Bridge.
The import of the RAW files was no problem however the files lacked the keywords and IPTC data, which I applied in Bridge.
I also tried to import JEPG files and here Aperture could show me keywords and IPTC data.
Why does this not work for RAW files? What do I have to do in order to get it to work?
Thanks in advance for your advise
/David

When you add metadata (keywords etc.) to most proprietary raw formats (including Canon .CR2 files), Bridge doesn’t know how to embed that data in to the file—Canon and other manufacturers haven’t told Adobe (or anyone else) what the structure of these raw files is and how metadata can be stored within the file itself. Therefore, Bridge creates a ‘sidecar’ file to go with the raw file: the sidecar file sits alongside the raw file, with the same filename and a .xmp extension. This sidecar file contains any metadata you may have applied, as well as adjustments you have made in Adobe Camera Raw.
Unfortunately, Aperture doesn’t read these sidecar files when importing raw files, so you lose any adjustments from ACR (not surprising, since Aperture is obviously a different raw converter to ACR so the adjustments would be different anwyay), but also you lose any metadata you may carefully have applied.
There may be an answer, however. But it’ll cost. That would be to use iView Media Pro (which has recently been bought by Microsoft, but a Mac version still exists). There is a 21-day free trial for iVMP—since my suggestion is to use it as a temporary conduit for importing all your existing raw files into Aperture, you won’t necessarily have to pay the £129 GBP asking price for iVMP (others can debate the morality of that statement, however; fortunately I already owned iVMP and so didn’t have to worry about such things). I believe iVMP can read the XMP sidecar files created by Bridge. Create a new iVMP catalogue with all your raw files which you want to move into Aperture. It should bring all your existing metadata into the iVMP catalogue as well.
Then, import all the raw files into Aperture. As you have found, they’ll be without any metadata. As long as the filenames are the same in both the iVMP catalogue and the Aperture library, you can use Adam Tow’s application Annoture to transfer metadata from the iVMP catalogue into the Aperture library.
Sort of circuitous, but possible. If only Aperture read the metadata from those sidecar files, eh? If I’m wrong in thinking that iVMP imports the XMP metadata, then what you can do is get Bridge to convert all your .CR2 raw files into .DNG files. If you don’t know about DNG, read about it at Adobe. But briefly, Bridge is able to embed its metadata into the DNG files and iVMP is able to read that embedded metadata when importing DNG files into the catalogue. I know that for certain: I used iVMP and DNG files (from my own 20D) before using Aperture; when I started using Aperture (which I love, now) I used Annoture to transfer all my metadata from iVMP into Aperture.
Perhaps someone else will explain this better than I.

Reg import dmp file.

hi friends
what is the command to import DMP file in Oracle 10g database.
how to import this file in particular schema..
pls. help..

Prior to import you must have below requirement,
1. Directory created on DB where you have your dump file, you must have priviledge on this directory.
2. dump file on above mentioned directory.
3 use imp if you have export your dump with exp command , use impdp if have exported your dmp file using impdp.
4. Also you must have correct priviledge on exp,expdp utilities.
try to run 'impdp help=y' on your putty, it will open help for impdp.
hope it will help you in some extend.
Edited by: imkhan on Oct 22, 2012 4:32 PM

Error 3307 when importing build file in Essbase

We have a level-based dimension build file, which is a CSV file with 5 fields and some 13,000+ rows. We are getting 75 errors in the .err file when importing the file using a load rule. An extract of the .err file is as follows:
\\Record #4242 - Incorrect Parent [G] For Member [G4S] (3307)
C057038317,C057038317 - G4S,G4S,G,Other Accounts,Customer Group,Customer
\\Record #11502 - Incorrect Parent For Member [UG Ltd] (3307)
C043678386,C043678386 - UG Ltd,UG Ltd,U,Other Accounts,Customer Group,Customer
\\Record #11503 - Incorrect Parent [U] For Member [UG Ltd] (3307)
C044178034,C044178034 - UG Ltd,UG Ltd,U,Other Accounts,Customer Group,Customer
I have double checked the existing members and there are no duplicate member names / conflicts here. Can anyone please suggest what the issue might be? I found a similar post at the below but this was not fruitful:
Incorrect Parent Error during Dimension build type "Add as child of"

This typically means the member was added to the outline already to another parent either prior to the dimension build or within the dimension build and in your dimension build settings you do not allow moves of members.
For example your member G4S If you look in your outline, I'll bet you find it (either as a member name or alias) and its parent is not "G"

Want to import favorites from IE. Click file, and import is dimmed. Cant use it when dimmed. Other way to import them ?

Following instructions from Fierfox to import favorites from IE to bookmarks in firefox. Instructions say in Firefox, click on "file", then "import". But "import" is dimmed and unable to use. Is there another way to import?

* Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode
* In Private Browsing mode some menu items are disabled (grayed) and features like visited links are disabled and not showing
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting Firefox will: Use custom settings for history
* Uncheck: [ ] "Automatically start Firefox in a private browsing session"
Export the Favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager.
* Export the favorites in IE to an HTML file (bookmarks.html): File > Import and Export
* Import the HTML file in Firefox: Bookmarks > Organize Bookmarks > Import & Backup > Import HTML: From File
See also http://kb.mozillazine.org/Import_bookmarks ("Import from another browser" and "Import from file")

'import' in file menu isn't highlighted. How do I import my favorites from IE8?

Everything under my file menu is highlighted and usable, except 'import'. I wanted to import my favorites from IE8. Cannot do it unless there is a way to get 'import' functioning.

* Make sure that you not run Firefox in [[Private Browsing]] mode
* In Private Browsing mode some menu items are disabled (grayed) and features like visited links are disabled and not showing
* You are in Private Browsing mode if you see "Tools > Stop Private Browsing", possibly grayed
You export the Favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager.
* Export the favorites in IE to an HTML file (bookmarks.html): File > Import and Export
* Import the HTML file in Firefox: Bookmarks > Organize Bookmarks > Import & Backup > Import HTML: From File
See also http://kb.mozillazine.org/Import_bookmarks ("Import from another browser" and "Import from file")

Convert Calendar database file to importable iCal file

Similar Messages

Maybe you are looking for