Convert clob to string?

hi all,
i'm having a problem getting the returnvalue of a storedproc. i'm using oracle database and created an oracle function that returns a clob data. unfortunately in vb.net, it won't accept clob format. if i change the returnvalue to varchar2 format it works fine.
is there a way to convert clob into string?
thanks.
p.s.
i'm using clob datatype because i need to return a large amount of characters (basically DDL statements like Creating tables with about a hundred partition more or less, also for creating a view with a very large text).

It should be possible since Value is a string type property. Say if your OracleClob object name is clob1 then it should be possible to write something like -
string str = clob1.Value;//C# syntax
If you are using OracleParameter's Value property then you will have to do ".Value" twice as shown below -
OracleParameter paramHavingClobInIt;
string str = (paramHavingClobInIt.Value as OracleClob).Value; //C# syntax

Similar Messages

Any way to convert CLOB to string in DB2?

I'm trying to provide report names in audit reports.
Is there any way to convert CLOB (AUDIT_DETAL.DETAIL_TEXT) to string?
We use BO XI R3 on DB2 v.9.
Thank you.

949767 wrote:
Is there any way to convert PDF document in to Tiff format with inbuilt IBR features?
In our Webcenter Portal app, we create the PDF document with the content of ADF pages and check it in UCM using RIDC api.
There will some batch job which will retrieve the documents from UCM and send them to client internal Document management system. The client / batch job will only process TIFF files. So we need a way to convert the PDF into TIFF. We are okie to have both PDF and TIFF stored in UCM.
When i have done research, i could only see components like PDFexport or TIFFConverter which only converts the other formats into PDF. But i am expecting a reverse conversion. Is it possible ? ThanksYa actually I got a tool that could [convert pdf | http://www.allbestapp.com/products/pdf-converter.html] to other formats, including jpg and tiff. that may fit your need.
You could take a shot through the link above.
Edited by: user13548958 on 2012-8-23 上午10:49
Edited by: user13548958 on 2012-8-23 上午10:52

Failed to convert Clob to String by using dbms_lob.substr

it says that the cache is not enough to do this.
I would like to get some infos from two tables as a View.
and one of the table contains a Clob data which is large
than 4k i think.
and when I tried to create the view, it says that expecting
- but got Clob, so I would like to change it to String by using
dbmas_lob.substr function and met the cache limited problem.
The database I am using is 10.2.0.1.0.

Thanks for reply.
and the problem was fixed.
after I removed 'distinct', which specified after 'select'.

Problem with JTree converting Node to string

I have a problem that I cannot slove with JTree. I have a DefaultMutalbeTreeNode and I need its parent and convert to string. I can get its parent OK but cannot convert it to string.
thisnode.getParent().toString() won't work and gives an exception
thisnode.getParent() works but how do I convert this to string to be used by a database.
Thanks
Peter Loo

You are using the wrong method to convert it to a String array.
Try replacing this line:
String[] tabStr = (String[])strList.toArray();
With this line:
String[] tabStr = (String[])strList.toArray( new String[ 0 ] );
That should work for you.

Is there an easy way to convert a long string into an array?

I can convert a long string into a 1-d array by parsing and using build array, but I would like to know if there is a function to make this easier.
For example:
from/   aaaaaaaabbbbbbbbccccccccdddddddd         (string of ascii)
to/       an array that is 1-d with each element having eight characters
          aaaaaaaa
          bbbbbbbb
          cccccccc
          dddddddd
Thank you.
Solved!
Go to Solution.

Try something like this:
(If you can guarantee that the string length is an integer multiple of 8, you an drop the two triangular modes in the upper left. )
Message Edited by altenbach on 03-14-2010 06:40 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
ChopString.png ‏9 KB

Need a function module to convert xstring to string in web dynpro applicati

hi,
need a function module to convert xstring to string in web dynpro application other than HR_KR_XSTRING_TO_STRING.
Moderator message: please (re)search yourself first.
Edited by: Thomas Zloch on Nov 17, 2010 5:31 PM

Hi,
Check the following link:
FM to convert XString to String
Regards,
Bhaskar

Converting Datetime in String in map

Hello all,
I am reciving a message from a system A, in which I am receiving field DOB as datetime and I am sending same message to system B , problem is that system B not able to handle DOB at there end as datetime - I have checked at BizTalk side that DOB
is going correct so issue is at system B side. now system B wants BizTalk system to send them DOB field as string.
What could be the possible way's to do this ?
1) We can change both schema System A schema and System B schema and map them is one way .
2) Can we take datetime and convert it to string using some funtoid ? and send that string to system B ? How ?
Is there other way for this ?
Thanks,
Nitin
Thanks and Regards, Nitin.

Hi Nitin,
First find out how the destination system consumes the datatime value. Some system would consume the value in the datetime field as string. It could be the problem in the format of the datetime. Ask them about their expected datetime format. For example
"2004-09-23T10:20:00.000-05:00" is the standard datetime format produced when you set a field as xssd:datetime. May be the destination system not able to handle this format.
If the issue is in the datatype i.e. in the way client consume, the datatype of the destination schema matter:
Then update the destination schema's to have string datetype. And simply map the value from the soruce's datetime field to destination schema's update string field. You don't need any scripting fuctiond to convert the data type. BizTalk's mapper would handle
it.
If the issue is in the date format i.e. in the way client consume, the datatype of the destination schema doesn't matter, and if the actual problem is in the format:
Then update the destination schema's to have string datetype. Use a scripting fuctiond as suggested by others and do the conversion in the script.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Help with Sample on Converting an XML string to a byte stream

Hello All, I am sure this is something simple, but I am just not figuring it out right now. I am following the sample - "Converting an XML string to a byte stream" from the developer guide since I want to prepopulate just 1 field in my PDF form. How do I reference my form field within my servlet code properly?? I have tried a few things now, my field is within a subform, so I thought it would be <root><subformName><fieldname>My data</fieldname></subformName></root> I have also tried adding <page1> in there too. I am following everything else exactly as given in the sample code. I do have an embedded schema within the form and the field is bound. Thanks, Jennifer

Well, if you have a schema defined in the form, then the hierarchy of your data must match what is described in the schema. So, can't really tell you what it would look like, but just follow your schema.
Chris
Adobe Enterprise Developer Support

CIN: Converting a C String to a LabVIEW String

Hi all,
I have been developing CINs in Microsoft Visual C++ 6.0 for LabVIEW as
project needs. However, I am having a problem with converting a C String
to a LabVIEW String in CIN.
I used two ways to try to make the conversion work that were LStrPrintf
and MoveBlock as stated as following:
1. LStrPrintf
#include "extcode.h"
#include "hosttype.h"
#include "windows.h"
struct teststrct{
const char* test;
struct teststrct testinstance;
typedef struct {
LStrHandle test
} TD1;
CIN MgErr CINRun(TD1 *testcluster, LVBoolean *Error) {
char *tempCStr = NULL;
strcpy(tempCStr, testinstance.test); // this would cause LabVIEW crash!
LStrPrintf(testcluster->test, (CStr) "%s", tempCSt
r);
// but if I assigned tempCStr as tempCStr = "test", the string value
"test" could be passed to LabVIEW without any problems.
2. MoveBlock
#include "extcode.h"
#include "hosttype.h"
#include "windows.h"
struct teststrct{
const char* test;
struct teststrct testinstance;
typedef struct {
LStrHandle test
} TD1;
CIN MgErr CINRun(TD1 *testcluster, LVBoolean *Error) {
char *tempCStr = NULL;
int32 len;
tempCStr = (char *)&testinstance.test; //since strcpy didn't work, I
used this way to try to copy the const char* to char*.
len = StrLen(tempCStr);
if (err = NumericArrayResize(uB, 1L, (UHandle*)&testcluster->test,
len))
*Error = LVFALSE;
goto out;
MoveBlock(&tempCStr, LStrBuf(*testcluster->test), len); // the string
was able to passed to LabVIEE, but it was unreadable.
out:
Did I do anything wrong? Any thougths or suggestions would be very
appreciated!

Thank you so much for your response, Greg. However, I still have problem after making
corresponding modification for LStrPrintf approach:
int32 len;
char tempCStr[255] = "";
strcpy(temCStr, testinstance.test);
len = StrLen(tempCStr);
LStrPrintf(testcluster->test, (CStr) "%s", tempCStr);
LStrLen(*testcluster->test) = len;
LabVIEW crashes. Any ideas?
Greg McKaskle wrote:
> The LStrPrintf example works correctly with the "test" string literal because
> tempCStr= "test"; assigns the pointer tempCStr to point to the buffer containing
> "text". Calling strcpy to move any string to tempStr will cause
> problems because it is copying the string to an uninitialized pointer,
> not to a string buffer. There isn't anything wrong with the LStrPrintf
> call, the damage is already done.
>
> In the moveblock case, the code:
> tempCStr = (char *)&testinstance.test; //since strcpy didn't work, I
> used this way to try to copy the const char* to char*.
>
> doesn't copy the buffer, it just changes a pointer, tempCStr to point to
> the testinstance string buffer. This is not completely necessary, but
> does no harm and is very different from a call to strcpy.
>
> I believe the reason that LV cannot see the returned string is that the
> string size hasn't been set.
> Again, I'm not looking at any documentation, but I believe that you may
> want to look at LStrLen(*testcluster->test). I think it will be size of
> the string passed into the CIN, and it should be set to len before returning.
>
> Greg McKaskle
>
> > struct teststrct{
> > ...
> > const char* test;
> > ...
> > };
> >
> > struct teststrct testinstance;
> >
> > typedef struct {
> > ...
> > LStrHandle test
> > ...
> > } TD1;
> >
> > CIN MgErr CINRun(TD1 *testcluster, LVBoolean *Error) {
> >
> > char *tempCStr = NULL;
> >
> > ...
> >
> > strcpy(tempCStr, testinstance.test); // this would cause LabVIEW crash!
> > LStrPrintf(testcluster->test, (CStr) "%s", tempCStr);
> > // but if I assigned tempCStr as tempCStr = "test", the string value
> > "test" could be passed to LabVIEW without any problems.
> >
> > ...
> > }
> >
> > 2. MoveBlock
> >
> > #include "extcode.h"
> > #include "hosttype.h"
> > #include "windows.h"
> >
> > struct teststrct{
> > ...
> > const char* test;
> > ...
> > };
> >
> > struct teststrct testinstance;
> >
> > typedef struct {
> > ...
> > LStrHandle test
> > ...
> > } TD1;
> >
> > CIN MgErr CINRun(TD1 *testcluster, LVBoolean *Error) {
> >
> > char *tempCStr = NULL;
> > int32 len;
> > ...
> >
> > tempCStr = (char *)&testinstance.test; //since strcpy didn't work, I
> > used this way to try to copy the const char* to char*.
> > len = StrLen(tempCStr);
> >
> > if (err = NumericArrayResize(uB, 1L, (UHandle*)&testcluster->test,
> > len))
> > {
> > *Error = LVFALSE;
> > goto out;
> > }
> >
> > MoveBlock(&tempCStr, LStrBuf(*testcluster->test), len); // the string
> > was able to passed to LabVIEE, but it was unreadable.
> > ...
> >
> > out:
> > ...
> >
> > }
> >
> > Did I do anything wrong? Any thougths or suggestions would be very
> > appreciated!

Converting a given string to non-english language

{color:#0000ff}Hi can anybody help me how to convert an entered string in textfield to french or spanish or to anyother non-english language?{color}

Hi,
I don't think you get a language translator package.
What you can do is store the fraises, words in a database.
//SQL Code
CREATE TABLE [Language_Data]
[ID]    INT NOT NULL IDENTITY PRIMARY KEY,
[Lang] VARCHAR(30) NOT NULL,                             //Lang English/French.....
[Type] CHAR(1) NOT NULL,                                 //is Fraise or Word
[Words] VARCHAR(100) NOT NULL                             //Fraise or Word data
GO
CREATE TABLE [Translate]
[ID]       INT NOT NULL IDENTITY PRIMARY KEY,
[FK_Orig] INT NOT NULL REFERENCES [Language_Data]([ID]), //ID of the original language
[FK_Trans] INT NOT NULL REFERENCES [Language_Data]([ID]) //ID's for all known translations
GO Create Stored procedures to add a new word/fraise to the [Language_Data] table,
Create a Stored Procedure to add a translation to the [Translate] table
Please note that to add a translation you will first insert into the [Language_Data] table then
insert the original's ID and the translation ID to the [Translate] table Also make prevision for backwards translation

Converting a binary string to a number...

Hi guys,
I'm trying to convert a binary string into a decimal integer. I'm not sure if LabVIEW has a VI that does that. I haven't found one yet. Basically, say I have the string '0101'. I want to convert that to the value '5'. Or say I'm using hex, I want '10101111' to be converted to 'AF'. So that's my dilemma. I'm hoping I'm not going to have to make my own VI. Thanks a lot!
-Mike

LabVIEW has exactly what you want even if it can be hard to find it.
To convert a binary text string like "0101" to a decimal value can easily be done using the Scan Value function found under the String/Number conversion section. If you provide the format %b to it (not mentioned in the manual) you will get the decimal value of your binary string.
Also, on your front panel you can change the format of your numerical indicators by right clicking on it and selecting Format & Precision. If you have a numerical indicator you can set it do display the numbers in e.g. hexadecimal form.
However, if you want to convert a number to a hexadecimal text string you can use the Number to Hexadecimal String function also found under the String/Number conversion section.
I
attached a simple example, Conversions.vi, that shows how it works. I hope this helps. /Mikael
Attachments:
conversions.vi ‏14 KB

Is there an easy way to convert from a String with a comma, ie. 1,000.00 to

Is there an easy way to convert from a String with a comma, ie. 1,000.00 to a float or a double?
thanks,
dosteov

Like DrClap said: DecimalFormat. However, make sure you understand the Locale things, as explained at http://java.sun.com/j2se/1.3/docs/api/java/text/DecimalFormat.html (which refers to NumberFormat as well) and use them explicitly. Like
public class FormatTest
public static void main(String args[])
    try
      // see NumberFormat.getInstance()
      DecimalFormat fmt = new DecimalFormat();
      Number num = fmt.parse("1,000.01");
      System.out.println(num.doubleValue());
    catch(ParseException pe)
      System.out.println(pe);
}most likely seems OK on your system, but may print "1.0" (or even fail) on some non-English platforms!
When performing calculations, also see http://developer.java.sun.com/developer/JDCTechTips/2001/tt0807.html
a.

Converting double to strings

I'm having a problem in getting my double to convert to a string, here's my code so far.
     public void calculatePayments()
          double paymentAmount;
          double monthlyInterestRate = (Double.parseDouble(interestBox.getText())/12)/100;
          double amountOfLoan = Double.parseDouble(balanceBox.getText());
          double numberOfPayments = Double.parseDouble(yearsBox.getText()) * 12;
          paymentAmount = (amountOfLoan * monthlyInterestRate) / (1 - Math.pow(1/(1 + monthlyInterestRate),numberOfPayments));
          Double.toString(paymentAmount);
          tableBox.append(paymentAmount);
And here's the error message I get:
ProgramInterface.java:134: append(java.lang.String) in javax.swing.JTextArea cannot be applied to (double)
          tableBox.append(paymentAmount);
As always, help is appreciated.

This line returns a String but has no affect on paymentAmount.
Double.toString(paymentAmount);To covert the double to String you can save the return in a variable
String s = Double.toString(paymentAmount);
tableBox.append(s);or combine them
tableBox.append(Double.toString(paymentAmount));

Converting double to String

I am looking for a way to convert double to String.
I think that I have to use wrapper like Double class and use toString(double d), but I am not sure how to do it.
Since toString() is static method, I do not have to have an instance of the Double class, so I was wondering what's the correct way to do it.
I need something like this:
String MyString = new String (String1.concat ( My_doubleNumber.Double.toString() ) );
Any Suggestions?
Thanks!!!

WOW thanks a lot. These are definately better than what I thought of doing originally.
In case I need to use the wrapper class somewhere else, I am just wondering what would be a proper use of Double and String?

Converting LRAW to STRING

Dear All
I am trying to convert LRAW to STRING, but all the FMs available are for RAW to STRING.
Is there any FM that can convert LRAW to RAW keeping in mind that the LRAW field has length about 32000
<moderator: please use meaningfull subject!>
Edited by: Jan Stallkamp on Aug 6, 2008 2:39 PM

Hi Vaibhav
I had solved this problem with a different work around where I used the ABAP program for sxmb_moni and used its features to get the output.
Thanks

Convert clob to string?

Similar Messages

Maybe you are looking for