Convert direct??

convert direct will not send me an email back?
is this normal how long doe it take to send an email back?

I think convertdirect.com would be in a better position to answer this. Have you checked their FAQ? You might also want to check that their email wasn't eaten or rerouted by a SPAM filter on your end. This is probably a busy weekfor their servers with lots of people having new toys to play with. They may be having some technical difficulties. You could always try a follow-up.

Similar Messages

  • PR To PO Convertion Directly

    Guru
    Is it Possible to convert directly PR to PO if yes then what is confiration step required to do. without using adopt procedure in ME21N
    Pl guide me
    Thanks
    Sudhir

    Hi,
            I would like to add one more thing. For the system to be able to generate PO automatically, a vendor should be set as the fixed vendor.
           Two things need to be set in source list:
    1) Set the fixed vendor indicator for one entry, to fix the vendor.
    2)For That particular entry the Source List Usage Indicator should be set to 1 (i.e. entry relevant for MRP).
    Apart from maintaining these two settings, the other steps need to be followed as mentioned in the previous post.
    Regards,
    Chiranjib.

  • Converting AVCHD files from .mt2s VS Ingesting Directly with FCE

    I found this out by mistake.
    I am working with lots of older footage taken on a Sony Camera in AVCHD. Originally I downloaded much of that footage to my PC using Sony's software Picture Motion Browser (PMB).
    All of the files stored on my PC were taken from the camera into .mt2s format.
    I have decided to work with Mac and now needed to convert those files to .mov to use in FCE.
    I used a third party program called ClipWrap and it worked well. MPEG Stream Clip will also do this well.
    My files converted to .mov this way ended with files that retained their same file names as existed from the original download to the PC in .mt2s format. I find this an amazing advantage as these file names hold the full date and time shot information. Year, month, day ... e.g. 20090223132124
    If on the other hand I ingest files using FCE, the resulting file names default to clip numbers only e.g. clip #1 Clip #2 etc. ... and all the date information is gone.
    ? My question is this ... Is it OK or advisable to go thru this 2 step process for the file name convenience? Do I lose anything in this double step ... such as file quality, data or anything else that would hurt the end result in my final editing in FCE?

    If you feel the ClipWrap/Streamclip approach is more convenient, go for it. As long as you're using the program to convert directly to the Apple Intermediate Codec then the only thing you lose is time (in my experience Log and Transfer ingests a bit faster + has a nicer interface).

  • Can't convert files to pdf using Acrobat 8 Standard or 9 Pro

    I am having a major problem. I have tried converting both Word 2003 and Excel 2003 documents to pdf using Acrobat 8 Standard (I can't recall which version because I uninstalled and installed a trial version of Acrobat 9 Pro) and Acrobat 9 Pro. I have tried to convert directly from the open document and through Acrobat using create from file. In every instance the process starts and then stops after a few moments. When I try the conversion from within Acrobat, I get the following error message: " Pdf conversion failed, please correct the error and retry." When I try the conversion directly from Word or Excel, the conversion starts, stiops suddenly and gives no error message.  I have had Acrobat 8 Standard installed for a couple of years. It worked fine on this computer until the problem started a week ago or so. There have been no software or hardware changes that woudl trigger suspicion.
    I've tried uninstalling and reinstalling the 8 Standard version. I have uninstalled the 8 Standard version and installed the 9 Pro trial version. I have run the repair module on both versions. I'm sure it is something simple but I just can't figure out what the "error" is that I need to "correct". Any suggestions?
    As an aside, I have several Adobe programs (Photoshop CS5, Contribute 3 and Acrobat), all of them expensive. Their business model of offering no unpaid support (even for this type of problem) is one reason I hate Adobe more than Microsoft... but I rant.

    When you uninstalled, you should have used the MS Installer Cleanup utility. It cleans up a lot of the junk left over in the registry. You should have also deleted the Acrobat folder. Then you would reinstall. You did not indicate your OS and it may be that you need to update the AA8 to get it to work correctly. Also, the installs and uninstalls can mess up your registration process if you are not careful. If you uninstall the AA9 trial, you will not be able to reinstall it for use. At this point, I can only suggest you do a repair of your installation and be sure you have all of the updates.

  • DeserializeJSON - is there a limit on the size of the JSON data that can be converted?

    I have some valid JSON data that's being converted successfully by DeserializeJSON... until it gets to a certain size, or that's certainly what appears to be happening.  The breaking point seems to be somewhere in the neighborhood of 35,000 characters... about 35KB.  When the conversion fails, it fails with a "JSON parsing failure: Unexpected end of JSON string" message.  And when the conversion fails, the JSON data is deemed to be valid per tools like this one:  http://www.freeformatter.com/json-validator.html.
    So, is there a limit on the size of the JSON data that can be converted by DeserializeJSON?
    Thanks!

    Thanks Carl.
    The JSON is being submitted in its entirety, confirmed by Fiddler.  And it's actually being successfully saved to a SQL Server nvarchar(MAX) field too.  I can validate that saved JSON.
    I'm actually grabbing the JSON to convert directly from the SQL Server, and your comments / thoughts led me down the path of resolution.
    Turns out that the JSON was being truncated prior to getting to the DeserializeJSON command, but it was the cfquery pull that was doing the truncating.  The fix was to enable "long text retrieval (CLOB)" for this datasource in CF Admin.  I'd never run into that before or even knew that this setting existed.
    Thanks again for your comments!

  • Payment Posting - Replacing a direct deposit with a check

    Dear Experts,
    I need your advise on the following:
    Running SAP ECC 6.0 and gross to net payroll. The net pay wage type is posted to different account based on payment method (Direct deposit or check).
    In instances where the employee has provided a wrong bank account number, the ACH is rejected by bank and we have to perform the payroll replacement via OC workbench to pay the amount via check. After the OCWB process we call a process model to print check and second step of the process model is to call Payment posting program (H99_POST_PAYMENT).
    The payment posting step posts the amount to account for the check (as the employee is now paid via check) but it does not reverse the original entry which was made when the employee was paid via ACH.
    SAP responded back saying it doesnot/cannot reverse a portion of the payment posting document when these types of adjustments are made. I wanted to reach out to other users/experts to see what process they are following to reverse the  entry.
    Any help is greatly appriciated.
    Thanks

    Hi,
    Generally process goes this way.
    If amount posted is incorrect or may be due to incorrect account provided during direct deposit.
    Run prenotification program after payroll to convert direct deposit to checks for 10 days until this time bank is sent with bank account file by client to validate accounts and if there are any changes then they are made in system.
    Once confirmed after 10 days automatically checks will be again converted to direct deposits for employees for whom prenotification was run.
    The steps will be :
    Payroll run
    HR Posting run
    Prenotification run
    Pre-DME run
    Print check and DME run
    Also, if your client does not want prenotifcation then you will need to set-up process model to first run for reversal of postings and then to run for replacement of payment through process model set-up.
    Thanks,
    Ameet

  • How to convert the text field into currency field

    Hi,
    I have an requirement to converting the text field into currency.
    If I convert directly it gives dump.
    If I convert this to Numeric means it takes the decimals also as whole value.
    Is there any FM to convert the text field into Currency field.
    Please advice me.
    Thanks in advance.

    Hi,
    I am on an SRM sytem, which unfortunately does not have th FM: PSSV_TEXT_INTO_FIELD_CURRENCY.
    But I also need to transfer a string value like '12,99' to a field with type curr.
    Can i Do that manually, or is there another FM?
    I have already checked code with write to or pack/unpack.
    But without success yet.
    Something like this:
    DATA: g_str(11) type c.
    DATA: g_p type p.
    WRITE '12,99' TO g_str CURRENCY 'EUR'.
    is no use for me. Finally I need to move g_str to my curr-field, which causes st22.
    also: PACK g_str to <curr-field or g_p> dumps.
    Help appreciated.
    regards, matthias

  • Acrobat X Converts Non-Bold Font to Bold From Word Doc

    I had used Acrobat 8 at work for over three years with no problems converting any MS Office documents to PDF files.  I've purchased Acrobat X Pro for my use at home and now every time I try to convert a Word file (either a doc or a docx), it changes the font on the first page to bold and leaves the second page normal, as the original font in the Word file.  I'm not using an especially unusual font (tried it with both Californian and Antiqua, with the same results) and the font shows as embedded in the Acrobat properties, so I don't think that's the problem.
    Has anyone else experienced this problem and, if so, is this just one of those "improvements" that renders the software useless, or is it possible this is something they hope to fix soon?

    I'm not sure what you mean by "checking the font for changes".  In the Word file, only items that are supposed to be bold show as bold; in Adobe, the first page shows entirely as bold and the properties show that I have both regular, italic, and bold fonts - which is correct, because the original Word file has both regular, italic, and bold fonts in it - just not where they are supposed to be (at least on the first page). Second page is fine.  And, as I mentioned, "converting it from Word 2007 using Save As PDF" - that *is* using the plug in.  My point is that whether using the Word PDF plug in or converting directly using Acrobat X created the problem.  I say "created" because this morning, it seems to be working fine.  No rhyme. No reason. Not doing anything differently.  I do know that I've seen a similar problem in a PDF letter I received from a colleague who was using Acrobat X (while I was still using 8).  She reviewed the original Word file and, like mine, it was fine, it was just in converting that the problem arose.  So I've decided that the solution involves rebooting one's 'droid.  It seems that 21st century solutions are the same as they were a quarter of a century ago.  Oh joy.
    Thanks to all for the input, though.

  • Problem converting music file into aiff: 'empty' aiff file

    I can't get on with my edit!! Problem: I try to convert a music file so I can use it in a sequence as background music. When I convert (export using quicktime conversion) the mp3 file into a aiff file (choosing bit depth 16 and 48000 khz) I can convert the file in an aiff file, but then, when I import this aif file and I want to listen to it, it doesn't contain any music, sound doesn't show up, as if it was empty (though shows 3 MB and right duration). What is going on here, what am I doing wrong??
    Please help!!

    It's not DRM protected, not coming from Itunes store... In fact it worked before but I don't know why it doesn't now, following all FCE instructions... MartinR you're right, it works when converting directly in itunes and then importing into FCE.
    Thanks guys!

  • Some advice on audio formats and converting tracks

    _*Some thoughts about audio formats and conversions. These are all supported by iTunes unless stated otherwise.*_
    General principles : there is no point in converting an already compressed track into a higher bit rate - it may seem as if this would give an improved quality, but once information has been lost through compression, there is no recovering it. The sound MAY be improved subjectively through the use of an appropriate EQ setting.
    This is not a definitive list : other formats, for example the one used by Real Player, and the ATRAC minidisc codec used by Sony, are not listed : many of the following can be used in iTunes, or are reasonably well-known.
    To use one of the available formats, they should be set in the Importing tag in *iTunes Preferences* (Advanced prior to iTunes 8, now in General). Once set, the format is used for importing CDs, but can also be used to convert tracks already in iTunes (using the Advanced menu : +Convert Selection to xxx+ ). It is not used when dropping files onto iTunes, or using Add To Library.
    1. _Lossless formats_
    Certain high-quality audio formats are "Lossless". This means that if the track is re-converted into the same format (after editing, for example), it will not degrade no matter how many times that is done.
    .AIFF - a format (common in Macs) representing full CD quality. Bit-rates are over 1400 kbps; +1 minute of music is approx 10MB.+
    .WAV - more or less the same as .AIFF but a Windows format.
    *Apple Lossless* - a 'once-only compression', applied to .AIFF or .WAV tracks to retain quality but reduce file sizes. A little (totally inaudible) information is lost, but also a more efficient 'codec' (compression algorithm) is involved. +1 minute = approx 5MB.+
    .FLAC - similar to Apple Lossless, but less proprietary (a more open standard). Not supported by iTunes.
    2. _'Lossy' formats_
    These formats are so-called because each time the conversion is done, the track is re-compressed, and more information is lost even if the file size remains the same. Various quality settings can be chosen, from around 320 kbps (high) down to below 128 kbps, though 128 is reckoned to be the lowest acceptable bit rate to listen to music in stereo.
    In general, the higher the input quality, the higher the output quality when 'stepping down'. Therefore an .AIFF track converted directly to 128kbps 'lossy' will sound better than a 256kbps track re-compressed to the same 128kbps.
    .MP3 - a standard audio compression format that has been around for many years. Common everywhere, and supported by virtually all contemporary music players. The codec has been improved so that modern MP3s sound markedly better than earlier versions. +1 minute @ 128 kbps = approx 1MB.+
    .AAC - a superior codec to MP3 (though the quality gap has narrowed), which has been chosen by Apple as the iTunes format of choice. Nowadays, a track at 128 kbps .AAC will sound around the same quality as the same track at 160 kbps MP3. +1 minute @ 128 kbps = approx 1MB.+
    .WMA - Windows' own proprietary lossy codec. It seems to have a bright and sparkly sound compared to MP3, but lacks a decent 'bottom end', i.e. the bass tones are somewhat lacking. Not supported by iTunes. (Can be played using VLC).
    .OGG - the open standard Ogg Vorbis format, often held to be superior to MP3 but little-used and therefore not supported in many platforms and players, including iTunes.
    When considering which format to use, the most important things to remember are
    1. how will these tracks be played back? (on a hi-fi? an iPod? expensive earphones?)
    2. the quality will depend finally on the judgement of the listener (some ears are better at telling small differences in quality than others)
    3. how much space is available to store (and expand) the music library?
    As for quality, a good way to decide is to "audition" different formats. Using one CD track known to you, try importing it at several different formats and bit rates (using iTunes Preferences). Then just play them, see which sounds best to you. In this way I came to decide for myself that AAC @ 256kbps was the best for me +(1 minute = approx 2MB).+

    The Windows version of iTunes supports importing of WMA files, converting them to one of the other formats. Mac iTunes offers now support of WMA files at all.
    Good point - and if I knew more about iTunes on Windows I would amend that and post a different version of the article in their forum.
    I accept the point about .WAV files being used also for compressed formats but didn't want to make it too complicated; the most common use for .WAV I believe, is full quality audio.
    On the subject of Lossless compressed audio (FLAC and AL), Wikipedia has this :
    _*Difficulties in lossless compression of audio data*_
    +It is difficult to maintain all the data in an audio stream and achieve substantial compression.+ +First, the vast majority of sound recordings are highly complex, recorded from the real world. As one of the key methods of compression is to find patterns and repetition, more chaotic data such as audio doesn't compress well. In a similar manner, photographs compress less efficiently with lossless methods than simpler computer-generated images do. But interestingly, even computer generated sounds can contain very complicated waveforms that present a challenge to many compression algorithms. This is due to the nature of audio waveforms, which are generally difficult to simplify without a (necessarily lossy) conversion to frequency information, as performed by the human ear.+
    +The second reason is that values of audio samples change very quickly, so generic data compression algorithms don't work well for audio, and strings of consecutive bytes don't generally appear very often. However, convolution with the filter [-1 1] (that is, taking the first difference) tends to slightly whiten (decorrelate, make flat) the spectrum, thereby allowing traditional lossless compression at the encoder to do its job; integration at the decoder restores the original signal.+
    +Codecs such as FLAC, Shorten and TTA use linear prediction to estimate the spectrum of the signal. At the encoder, the estimator's inverse is used to whiten the signal by removing spectral peaks while the estimator is used to reconstruct the original signal at the decoder.+
    This seems to imply that even Lossless codecs make changes, but it IS a very complex subject. If I could still edit the main article I would remove that bit about AL losing information.

  • How to convert row into column

    Hi All,
    My oracle apps version is r12 and db is 10 and i am using Bi publisher version 10g.
    Is it possible to convert row into column in Rtf template,
    My Query is
    SELECT distinct pvs.vendor_site_code,sum(aia.invoice_amount)
    FROM ap_invoices_all aia, po_vendors po, po_vendor_sites_all pvs
    WHERE aia.org_id = pvs.org_id
    AND aia.vendor_id = po.vendor_id
    AND aia.vendor_site_id = pvs.vendor_site_id
    AND aia.org_id=204
    group by pvs.vendor_site_code
    And output is like this
    Vendor sitecode Invoiceamt
    EAM-ERS 79240
    STAR GATE - PAY 3245902.31
    UPS - HQ 10792040.9
    Like this
    So in template i need the output like this
    Vendor sitecode EAM-ERS STAR GATE - PAY UPS - HQ
    Invoiceamt 79240 3245902.31 10792040.9
    I tried to achieve the output using sql query but by hardcoding only i have achieved it, so i have tried to convert directly in RTF template.
    can any one tell me is it possible.
    And if new project is added from the front end ie(now the query will produce 4 rows but now in template i have created only three columns)
    Is it possible to add a new column dynamically.
    Can any one please guide me and tell me is there any example.
    Thanks & regards
    Srikkanth

    Take a look at this post: http://blogs.oracle.com/roller-ui/bsc/spider.jsp?entry=MT%3aENTRY%3a5001
    Thanks,
    Bipuser

  • MPG file, used QT7.x Pro to convert to iPod:  No Sound

    I have some MPG files from my camera and when I load them into iTunes, they work, but I cannot get them on my iPod. When I run the iPod convert (either in iTunes or QT7Pro) The conversion works, but the video has no sound.
    Any ideas?

    I used MPEG Streamclip to convert it to .dv, then used iTunes to convert it for the iPod, now it has sound but the file size went from 47 meg to nearly 1 gig!
    If you use MPEG Streamclip as suggested by Dick above to convert directly, your iPod file should be on the order of 23-24 MBs. (Cutting the video data rate to 500 kbps and audio to 44.1KHz/128 kbps would further reduce the file size to about 19 MBs for the file specified.) As to your file size increasing to almost 1 GB, that is because the DV file you created has a data rate roughly 20 times the data rate of your original MPEG-1 file and roughly 40 times that of the H.264 file created by the default iPod setting in MPEG Streamclip. Use the intermediate DV conversion method only if you plan to edit the content in an editing application like iMovie or plan to use the new "Movie to iPod" converter which produces a 640 x 480 iPod compatible file that is 3 to 3.5 times the size of the 320 x 240 file produced by the MPEG Streamclip iPod default settings.

  • Converting string to float

    I have a decimal string "122339994" which i am trying to convert to float using Float.parseFloat. This results in incorrect value of 1.22339992E8.
    I thought for floats precsision comes into effect after decimal places.
    public static void main(String[] args) {
    String floatString = "122339994";
    float floatNumber = Float.parseFloat(floatString);
    System.out.println("Float is "+floatNumber+". Now double "+Double.valueOf(floatString));
    }

    See this API
    [Java2SE Float|http://download-llnw.oracle.com/javase/6/docs/api/java/lang/Float.html#valueOf%28java.lang.String%29]
    Note that trailing format specifiers, specifiers that determine the type of a floating-point literal (1.0f is a float value; 1.0d is a double value), do not influence the results of this method. In other words, the numerical value of the input string is converted directly to the target floating-point type. In general, the two-step sequence of conversions, string to double followed by double to float, is not equivalent to converting a string directly to float. For example, if first converted to an intermediate double and then to float, the string
    "1.00000017881393421514957253748434595763683319091796875001d"
    results in the float value 1.0000002f; if the string is converted directly to float, 1.0000001f results.
    Its better to see the Java APIs first for any information, we will get almost all the information we need from APIs
    Regards,
    Venkatesh

  • *Newbie Question* Acrobat 8.1 SDK: Converting Files and Multithreading

    I'm new to the SDK concept so please bare with me:
    1.) Can .DWG files be converted directly to PDFs?
    2.) **Must a version of Adobe Acrobat be installed on a computer for an application to function if it is using the SDKs class libraries?
    3.) If the application is installed on one computer, how many users are allowed to access it simultaneously.
    Thanks for the answers!

    >1.) Can .DWG files be converted directly to PDFs?
    Acrobat can use AutoCAD to do this, through the user interface. A
    plug-in can also invoke this.
    >2.) **Must a version of Adobe Acrobat be installed on a computer for an application to function if it is using the SDKs class libraries?
    Absolutely. Just as the Windows SDK is for computers with Windows on
    it, so the Acrobat SDK is for computers with Acrobat on it. The SDK
    itself does not add any interfaces, they all exist in Acrobat.
    >3.) If the application is installed on one computer, how many users are allowed to access it simultaneously.
    Only the logged in user. Acrobat is not for network or server use.
    Aandi Inston

  • Converting .OV to .ASF to play on a Windows Media Server

    Hello everyone,
    I am trying to create a good quality video file from Final Cut Pro that will stream on a Windows Media Server. I am being told by the tech guys at my work that it needs to stream as an .asf file because we use a Windows Media Server for our media here.
    I have searched but as far as I can tell there seems to be no direct plugin for Final Cut to export as an ASF or a WMV file.
    I work for a college, and I use a Mac to create our videos, but most people use PCs here to do everything else - including our technicians and web developers - so most people here are in the dark.
    I am really stuck here folks. Ideally, I want to be able to stream video files of about 60mbs on our college website - and find a way to have these videos running on a Windows Media Server.
    Thanks a lot - if anyone can help me I would be extremely grateful.
    Simon

    Thanks so much for all your responses.
    I will trial the two programmes that have been mentioned - in terms of streaming .asf I am still in the dark as to the best way to proceed.
    Would you all recommend converting first to a WMV file and then using a PC and related software to convert to .ASF - as I would have to do with Flip4Mac
    Or... using software that will convert directly from .MOV to .ASF on a Mac - as the Aimersoft programme seems to suggest it does?
    Thanks once again - I have been really impressed and really grateful with how quick these forums are to help people out!
    Simon

Maybe you are looking for