Convert dirver 2009 to 8.5
Hello, could you convert this dirver for a keithley 2200 porgrammable power supply from Version 2009 down to 8.5.
And by the way how do I convert a complete plug and play dirver at once?
Thank you very much,
thomas
Solved!
Go to Solution.
Attachments:
Keithley_2200_Series_Power_Supplies_Ver_1.0.zip 512 KB
Attached.
For your second question: http://zone.ni.com/devzone/cda/tut/p/id/8387
Attachments:
Keithley 2200 Series.zip 506 KB
Similar Messages
-
I have a drvier code from Watlow that I need to convert from 2009 to 2013 and is attached. Could someone help with this?
Attachments:
Example Cntl.ctl 5 KBJust open them up in LabVIEW 2013 and save them.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions -
Macbook aluminum 2008 convert to 2009?
I have a Macbook 2008 aluminum , and was wondering if i buy the casings for the early 2009 models can somehow convert it into one? Such as Would i be able to use the same battery as the one in 2009? and could i install an sd card reader in it? also as a side note, is it possible to upgrade the processor to something more modern? such as the core i7 or i5 with turbo boost? If so are there any blogs on upgrading a macbook? in general such as proccesor or other hardware?
I concur shldr2thewheel that none of that is possible at all
Allan -
Converting C3D 2009 dwgs to PDF
Greetings All,
A question in regards to using Adobe 8 Pro to convert AutoDesk C3D dwgs to pdfs, doesn't like it! We have currently migrated to AutoDesk Civil 3D 2009 and the create file command/icons do not show up and do not seem available for this cad version. Does anyone know whether there is a compatibility issue between Adobe 8 Pro and C3D. One of our users create pdfs and needs to include the layers as well, Adobe 8 seems to still work well with pre-2009 dwgs. We have gone through the normal repair, updates, etc. even tried to bring the cui menu from Adobe into C3D (we get icons but the commmand is inactive). Are these issues potentially resolved in Adobe 9?
MCHi,
this the answer from Oracle concerning the issue:
-- the IBR must be on a win machine to have WinNativeConverter installed and enabled AND the native application installed on the IBR machine. In this case, MS Project >and MS Publisher.
- IBR does not support the conversion of mpp or pub files on linux.
Hence enhancement request has been created for the same.
UCM needs to clean up the File Format Wizard to make it clearer as to which conversions are supported on various OS configurations.
You can check the bug for reference where the status is 11 - Code Bug (Response/Resolution) which means "Bug is being worked by Development".
Hence IBR on linux do not support the file formats - .mpp and .pub conversions.Take care! -
Convert labwindows 2009 to 8.5
Is it possible to convert a program written in LabWindows CVI 2009 to LabWindows 8.5? If so how would I go about coverting this file?
ThanksHi, this problem needs to be handled in two different areas: converting UIRs and portinog code back to 8.5.
As per UIR files, files written in CVI2009 cannot be opened in 8.5 natively: you will need to convert them so that they can be opened. This is possible only if you have not used any feature not present in CVI8.5. With an UIR file opened, go to Files >> Save as... and look into Save As field if you can switch back to 8.5. I hope you can but I cannot be sure since I have not installed 2009 yet. This is the very first thing to do since if you cannot convert the UIR porting the code has little interest.
If there isn't a direct option from 2009 to 8.5 you could try installing CVI9 evaluation version and execute the conversion in two steps: from 2009 to CVI9 and from this to 8.5.
In any case, examine the converted UIR files in 8.5 before uninstalling CVI2009 as some controls can result in different aspect and settings when converted (in some cases controls not present in the older versions are simply ignored when saving: this is the case for TAB control passed from version 8.5 to 7.1 where it doesn't exist).
The next step is to port the code back to 8.5. You should have no problem in directly compiling the source in the old environment, provided you have not used any of the feature CVI2009 or CVI9 introduced in the IDE. This table should help you in finding if there can be any incompatibilities.
If you happen to use any additional software like DAQmx or others, be sure it is installed in the older version as well as CVI2009: this can be a problem if you are planning to install 8.5 after installing 2009 on the same machine, as several packages install in the newer release found in the system, not considering previous versions. If this is your case put a note here as in some case it is possible to port the relevant files from the newer to the older release of CVI without running the installation program.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos? -
Hi ,
We are actually going to migrate from BizTalk 2009 to BizTalk 2013 . As a part of this i want to convert all current BizTalk Artifacts to get compatibly with BizTalk 2013. I was able to convert schemas , maps , Orchestration etc to .net 4.5 directly
via Visual Studio 2012 Conversion Wizard. But for BizTalk Rcv Location WebServices (.asmx and .svc) , i was not able to do the same. Could anyone give some insight on how to migrate the Rcv Location during the migration from BizTalk 2009 to BizTalk 2013.
Abhijithwell i guess you need not to re expose the schema, i am not pretty sure though. Because your code relies on .net 2.0 and you are moving it to higher version 4.5, it should work.
So only changes in apppool settings and if required, changes on web.config file for runtime version property will do.
well i am not pretty sure though, just try and trouble shoot it.
Please mark the post as answer if this answers your question. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Errors with VI after down converting from 2009 to 8.x and porting from Windows to Linux
Hi All,
I'm pretty new to Labview so I've been trying to learn along the way. I've been tasked with porting a .VI that my supervisor developed on Windows to a Linux machine. The ultimate goal would be to build an executable that would be able to run on Linux based VMEs. The .VI was developed on Labview 2009 and the Linux machine has Labview 8.2. From what I understand I would need to downconvert the .VI in 2009 to be compatible with 8.2, then from there I would compile the .VI on 8.2 in Linux and create the executable.
After having downconverted the .VI I tried to run the .VI to see if the program still worked/if any parts were broken. Unfortunately, it seems like after having downconverted and porting to Linux the program is unable to communicate over TCP/IP with the module that the program was designed to work with. My supervisor ran the debugging application where it showed the progress of the data as it travelled along the block diagram and it seems to break at the TCP write blocks.
The error that I've recieved was Error 56 at TCP Read in WriteThenReadRegister.vi->E_LINAC_BPM_REV.1.0.vi
Possible reasons: labview: the network operation exceeded the user-specified or system time limit.
We've tested the connection outside of Labview and the Linux VME can definitely communicate with the module in xterm.
Can anyone point me in the right direction to start trouble shooting this?
When I performed the downconvert operation I recieved a bunch of warnings that stated:
C:\BPM_Labview_Files\My_LabVIEW\New folder\E_LINAC_BPM_Rev.1.0 Folder\E_LINAC_BPM_Rev.1.0.vi (E_LINAC_BPM_Rev.1.0.vi)
The object "Increment" does not support output configuration in the previous version.
The object "Divide" does not support output configuration in the previous version.
The object "Increment" does not support output configuration in the previous version.
The object "Divide" does not support output configuration in the previous version.
The object "Divide" does not support output configuration in the previous version.
The object "Multiply" does not support output configuration in the previous version.
The object "Divide" does not support output configuration in the previous version.
The object "Increment" does not support output configuration in the previous version.
The object "Divide" does not support output configuration in the previous version.
The object "Increment" does not support output configuration in the previous version.
The object "Divide" does not support output configuration in the previous version.
The object "Increment" does not support output configuration in the previous version.
The object "Divide" does not support output configuration in the previous version.
The object "Increment" does not support output configuration in the previous version.
The object "Increment" does not support output configuration in the previous version.
The object "Divide" does not support output configuration in the previous version.
The object "Boolean Array To Number" does not support output configuration in the previous version.
The object "Increment" does not support output configuration in the previous version.
The object "Multiply" does not support output configuration in the previous version.
The object "Boolean Array To Number" does not support output configuration in the previous version.
The object "Boolean Array To Number" does not support output configuration in the previous version.
The object "Increment" does not support output configuration in the previous version.
The object "Increment" does not support output configuration in the previous version.
C:\BPM_Labview_Files\My_LabVIEW\New folder\E_LINAC_BPM_Rev.1.0 Folder\PowerScan.vi (PowerScan.vi)
The object "Multiply" does not support output configuration in the previous version.
The object "Multiply" does not support output configuration in the previous version.
The object "Multiply" does not support output configuration in the previous version.
The object "Multiply" does not support output configuration in the previous version.
The object "Subtract" does not support output configuration in the previous version.
Thanks in advance,
Jason.I guess I should also post the .VIs in case someone could give some insight as to what's breaking.
Again, I need to downconvert this from 2009 to 8.2 to run on a linux machine.
In the mean time I'll be playing around with the "save as previous version" and the tool kit options.
Thanks again in advance.
Jason.
Attachments:
E_LINAC BPM 2009.zip 266 KB -
User Event Case getting tied up for long duration in LV 2009 (with SP1)?
Quick question here...is there any decent reason the user event case is getting tied up for long durations in LV 2009.SP1? In 8.5 I never had an issue with my code doing this, though when converting to 2009.SP1 I am running into huge lock-up issues with the user event case.
I have not seen aby issues...
You are saying that the code from LV8.5 (unmodified) behaves differently in LV2009 SP1?
Can you post your code? -
I want to aggregate the sum of cash transactions year to date, weekly.
I have the following code:
SELECT SUM(T2.Debit-T2.Credit), datepart(wk, T1.refdate)
FROM OACT INNER JOIN
JDT1 T1 ON T1.Account = OACT.AcctCode Join JDT1 T2 on T1.transid = T2.transid
and datePart(wk, T2.RefDate)<= DatePart(wk, T1.RefDate)
and datePart(wk, T2.RefDate)>= CAST(CAST(YEAR(T1.RefDate) as CHAR(4)) + '0101' AS DateTime)
WHERE (OACT.FatherNum = N'1000') AND (T1.RefDate > CONVERT(DATETIME, '2009-01-01 00:00:00', 102))
Group by datepart(wk, T1.refdate)
Order by datepart(wk, T1.refdate)
This is not working, I get all zero values.
Any help is appreciated.
RobThis is how I solved the problem
SELECT Distinct DatePart(wk, T1.refdate) as Week,
(Select SUM(T2.Debit-T2.Credit) from JDT1 T2
Where DatePart(wk, T2.RefDate)<= DatePart(wk, T1.RefDate)
and T2.Account < '_SYS00000000020' and Year(T2.RefDate) = 2009 ) as 'Cash Balance'
FROM JDT1 T1
Where Year(T1.RefDate) = 2009
and DatePart(wk, T1.refdate) <= datePart(wk,getdate())
Order By DatePart(wk, T1.refdate)
It isn't elegant, but it works.
Rob -
Unified Storage Simulator and ESXi
Hello all, I'm trying to test out Sun's Unified Storage system via their Simulator for VMware. I tried loading the system into ESXi (copied the files into my datastore and used vmware-cmd to register it). The machine shows up in my list, but as "invalid".
Will this only work under VMware Player?Earlier versions of the Simulator (2008 and 2009 versions) have been released as a VMware as well as VirtualBox version simulator.
Newer versions are only release as a version for Virtualbox and don't do well converting.
You can try using tools as VMware converter, OVFtool, extractors, creating a new VMware VM and manually adding the VMDK files. You'll see all will fail.
The first simulator version of 2008 would let you convert it to a ESX VM from VMware Workstation with the VMware Converter tool. Unfortunately this simulator version is the one version that doesn't allow updating to a later 2009 or 2010 release.
Trying to convert a 2009 version of the simulator from VMware Workstation to VMware ESX gives you problems booting the VM (panic, bug in OpenSolaris with devices?).
Converting a 2010 release simulator won't work either as described earlier.
So, waiting for the VMware release mentioned earlier would be your best and probably only option. Hopefully the 'devices' problem is fixed so you can use the VMware Converter tool to create and ESX vm.
Good luck. -
Convert from 5.1.1 to 2009
Hi, could you please convert from 5.1.1 to 2009 ?
thank you
YG
Solved!
Go to Solution.
Attachments:
Lost and Found.zip 34 KBHi,
Here it is in LV 8 You can read this in LV 2009
Kees
Attachments:
ZSweep-bias sub-simple2Nikhilmodified.vi 16 KB -
Error -2009 Converting a file to real media
Hi
I need some help, i've upgraded my Quicktime 7.1.2 to Pro and i can't seem to convert files to real media and i keep getting error -2009 can anybody help??There's no codec for converting to Real Media that
works on a Mac with QuickTime 7 that I know of; the
one from Real only works with QT6 and earlier. To
covert to Real's format, you may have to use a
Windows system.
Now I'm confused. I upgraded to QuickTime 7 Pro (I had QT Player 7.1.3) so I could use the Real 10 Export Plug-in. The specs at Real say the plug-in needs QT6.0 or later. I'm getting the same -2009 error. (Original AIFF files were created with Audacity, but I tried turning them into QT files first when I started having trouble.) I understand about the incompatibility with OS 10.4, but I'm running 10.3.9 Panther. Does this mean I'd have to downgrade to QT6 Pro to use the plug-in -- is that even possible? Or is this enterprise a complete loss and I just threw away $30?
G4 PPC Mac OS X (10.3.9) -
Convert labview file 2010 to 2009
Hi,
Can anyone convert the file from labview 2010 version to labview 2009.
File attached as attachment.
Thanks in advance
Owen
Solved!
Go to Solution.
Attachments:
LAPP.vi 37 KBFor future reference, there is the Conversion Board for this kind of thing.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
LAPP.vi 96 KB -
Version convert from 5.0 to 2009
version convert from 5.0 to 2009
Attachments:
KIAI.LLB 567 KBSee your other post.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Convert labview 5.1 R&S SMG driver to 2009
I need help in converting this driver from 5.1 to 2009.
Thanks!
Solved!
Go to Solution.
Attachments:
rssmhu_lv5_1_0.zip 747 KBhttp://forums.ni.com/t5/Version-Conversion/Upconversion-from-5-0-1-to-9-0-1/td-p/1882761
Maybe you are looking for
-
Hi Experts, I want a query that will pick all AR invoices that meet the following conditions:- The card code belongs to a particular customer group, in this case the group code is 108 The invoice posting date is after 21/05/2012 The invoice status is
-
How can I change an image to look like a watercolor painting?
I'm using FW CS6 and need to change an image (.bmp, .jpeg, .jpg or .fw) to look like a watercolor painting. All help is appreciated. -Jack Ripley
-
Surface Pro pen pressure is not working in Photoshop
I just bought Microsoft Photoshop. But Adobe Photoshop doesn't provide pen pressure sensitivity. I tested Microsoft OneNote, Fresh Paint, and Autodesk Sketchbook. They are working well. Please provide the pen pressure function in Photoshop too.
-
How can I copy a photo from iphoto to PReview to make it smaller for uploading to a site that requires a smaller image?
-
I would like to install Creative Suite 5.5 on my new work computer and i erased the programm from another work pc. But while installing the programm on a new computer i get the error message: Error "This serial number is not for a qualifying product"