Convert dvd file for web ...

I have a dvd disk that a friend sent to me that he made of a home video. I would like to get that dvd disk and have to converted or compress so that I can upload it to my site.
I have done a similar project, but only with raw mpeg-4 files. Not sure how to go about doing this when the footage has already been converted to dvd format.
any suggestions would be appreciated. I tried to used compressor but it will not recongized the .vob files.

normally I wouldnt suggest this, but since your going to web and probably scaling it down to 320x240 anywayd it shouldnt matter. Pop your dvd into a dvd player (set top) then plug that into your camera and then plug your camera into your computer. Capture the whole thing and then export that through compressor and it should look pretty good. You could also get some kind of app that pulls the vob files apart and gives the streams that were on it. These probably cost money though. Good luck hope this helps.

Similar Messages

Create DVD files for web

This question was posted in response to the following article: http://help.adobe.com/en_US/premiereelements/using/WSeffff8bffc802084-7cb60a1912fd358c4a5- 7ff7.html

The transport controls are present when the screen is scrolled down. Sorry I hadn't investigated this more completely befor posting the original question.

Converting sequence or QT file for Web use

I have a short 13-minute sequence that I need to convert to a QT file in order to then convert to flash for posting to our Web site. I've done this multiple times today with no luck in reducing the file size. By exporting using Quick Time Conversion, using my default settings for compression (H.264) type, the file size of the final .mov file was 200-some MB. After changing my settings to a lower quality final product, I now have a file .mov that is 2GB!?
I have several files that I'll need to convert QT files for posting to the Web. The lengths range from 5 minutes to an hour.
Can anyone give me any kind of advice on the best way to convert to a QT file resulting in a smaller file size? If I am making something very simple, very difficult, please lend your thoughts!

Hi there,
FCP may estimate unusual time remaining but usually that estimate is not accurate. When I export to H.264 very often it appears that FCP hangs on 7% but thing is it eventually will encode within 15 minutes. Circumstances change from case to case (machine specs, length of movie, export settings).
Set an IN and OUT on a portion of your timeline and export again to test quality and the time your machine require to encode.
G.

Convert vob files for use in FCP X

I need to convert VOB files for use in FCP X on my macbookpro in OS X Lion (10.7.5) I use Clipwrap to convert other formats, but it does not seem to accept VOB for conversion (or if it does, I have not figured out how). In searching the web, I've come across several products that tout themselves as the best, fastest, easiest VOB to Prores converters etc., some that advertise as "free" when actually only a watermarked trial version is free. I have no idea of the actual quality of any of these (some examples are Brorsoft video converter for Mac, and Acrok HD Video Converter...), and would like some input from folks w/ experience in these things before dropping $ on the problem.
In another thread on this site I read something about MPEG Streamclip, & something about needing to separately download an MPG2 converter for it w/ Lion or Mountain Lion - the process sounded confusing and I couldn't tell if it applied to my situation or not...
Thanks in advance for any light anyone can shed.

Midnighttrain wrote:
… MPEG Streamclip, & something about needing to separately download an MPG2 converter for it w/ Lion or Mountain Lion - the process sounded confusing …
MpegStremclip is THE Swiss Army Knife, when it comes to conversion, a 100% reliable, it IS absolutely free (any download a dollar = Stefano would be a millionaire!), I dare to say it is THE most recommended 3d party tool in the editor community ....
How & why you need to install the mp2 plug-in does Signore Cinque explain in simple words on his website:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html

Which folder i have to put my .jsp file for web report?

for web report(not the paper report) i put my .jsp files in the
\reports\j2ee\reports_ids\web
folder
this is for the DS(Developer Suite)
i'm trying to move this file to different machine where AS(Application Server)
is installed.
but couldn't find above path. where do i have to put .jsp file for
web report?
or do i have to modify in the registry? if so, where?
Thanks

Hello,
Take a look to the thread :
where to add new jsp reports directory location in path
"...You have to keep jsp files under document root that is OH/j2ee/OC4J_BI_Forms/applications/reports/web directory. You can create sufbolders under this directory and keep jsp files. ..."
Regards

How do you convert .AVI files for using in iMovie without losing the original clip time and date

Hi everyone! does anyone know how to convert .AVI files for using in iMovie without losing the original clip time and date? Handbrake, MPEG Streamclip and Evon all replace the original timecode with the date of modification. This is very frustrating when you are trying to keep the chronology right. I know that if you upload the files to iMovie from one device the chronology isn't a problem, but I'm adding video files from a couple of iPhones and a couple of camcorders. any help much appeciated.
paul

Hi everyone! does anyone know how to convert .AVI files for using in iMovie without losing the original clip time and date? Handbrake, MPEG Streamclip and Evon all replace the original timecode with the date of modification. This is very frustrating when you are trying to keep the chronology right. I know that if you upload the files to iMovie from one device the chronology isn't a problem, but I'm adding video files from a couple of iPhones and a couple of camcorders. any help much appeciated.
paul

Convert mts files for editing in Final Cut?

Is there a way to convert mts files for editing in Final Cut Express or Pro?

Well, first, if you are talking about AVCHD video, FCE & FCP can directly import it from your camcorder. They will also import AVCHD from an SD card or even your hard drive provided you have saved the entire AVCHD folder structure, not just the .mts files by themselves.
If you only have the .mts files (without the surrounding AVCHD folder strucutre) then you should be able to use MPEG Streamclip to convert them to QuickTime/Apple Intermediate Codec for editiing in FCE. MPEG Streamclip is free and works great.
If that doesn't work, then look into ClipWrap, which has a $49.99 price tag.
This will work the same for converting .mts files to ProRes assuming you already have FCP installed, which gives you the ProRes codec.
FCE & FCP do not, however, directly import video from DSLRs because the camera manufacturers have each done some proprietary stuff in their implementation of video in their DSLRs. However, if you have a Canon DSLR & FCP (that is, FCP 7) there is a Canon EOS video plugin that will enable you import the video directly from the DSLR into FCP7. Not sure it's supported on Lion (10.7.x) just yet, but if you have a Canon DSLR it's worth a look.

Converting wmv files for use in imovie 9 for users who have pc

To convert wmv files use your pc windows movie maker. (if you have one) On your pc, open windows movie maker, get collections and get your wmv project/video, drag it into the timeline, and then save in your computer, save it as an avi file and rename it. After send file to your memory card reader, that way you can transfer that file onto your mac!! And voila! I tried to email it but file became too large so transfering it to a memory card is the easiest. This took me days to figure out, I hope I have helped someone out there.....

I don't want to use DV because these .m2t files are from an HDV camcorder and I want to preserve the aspect ratio and resolution in the files. What other "flavor" of HD would you suggest that I convert them to since (a) I can't bring the files into FCP6 or Compressor (b) I don't see any other flavors of HD to use in VisualHub.
The whole business of converting .m2t files to a FCP6 compatible format, i.e. a Quicktime format, would seem to be one that is commonly encountered, and yet I have never found a thread on this forum that really answers this question: What is the best workflow for converting .m2t files for use in FCP? Surely, one of the pros who frequent this forum must have dealt with this issue and have an answer.
I don't want to have to recapture the files from tape all over again just to use them in FCP6.
Tom

Converting video files for zen

}Hello,
I recently sold my old desktop and purchased a laptop. I need to obtain software that will convert my video files to suitable files for my creative zen. I will be putting them on the external memory card thats in my zen, so what program can I use to convert the video files on my laptop first before putting onto the memory card?
Thanks!

"Re: Converting video files for zen?Use the Creative Video Converter. ?You can download it from the Creative Support website. ?If you have the Creative Zen (i.e., the credit card sized one that was released after the Zen Vision series and before the Zen MX), then use this link:
http://support.creative.com/download...DownloadId=050

.FLV file for web

Hello, I need to export a .FLV file for web, I dont have access to compressor.
I would like to keep the file size small but keep a professional finish, how low can I go in terms of file size?
Any suggestions for dimensions, fps etc?
Any help would be appreciated, thanks

the file is a .mov
.mov is a container. The video inside could have been made with any one of a number of codecs.
768x576 is the current size.
That tells me it is most likely PAL, 25 fps. What was the source media? Could be any of the Beta formats, 3/4", D1, 1"C etc etc. More information is always a good thing.

For iTunes experts! - My iTunes has been converting WMA files for 11 days!

My question is: If I exit iTunes (i.e. Reboot my computer) and then go back to iTunes, will iTunes continue finishing the conversion process?
My iTunes has been converting WMA files for 11 days now..
It's converting my entire multi-thousand album collection from windows media player into iTunes.
Will it start where it left off?
Or, the dreaded, will it start all over again, causing thousands of duplicates in my new iTunes library?
The ONLY status bar shows the current song, I have no idea which order it's going in or how much longer it has to go.
I understood it would take a long time to convert the thousands of WMA files into iTunes format, but I have no way to know how much longer it will take, or if it's interupted what will happen!
Thanks -
- jb
Message was edited by: jbmanz

Understood. If I quit iTunes before it's done converting the files I had previously selected, it will not continue to convert the WMA's to iTunes format. I will have to re-select the songs I want converted.
Now: What if I select the entire folder (containing all songs, some already converted into iTunes, others not yet converted) - will iTunes RE-Convert songs that it has already converted (therefore creating duplicates in my library)? Or is the software able to recognize that an identical entry is already in its library index?

Convert .fla files for Safari and Chrome

hi boys,
i need to convert .fla file for Safari and Chrome.
i pay for that, after new file is tested, and is ok.
the fee is 40$/file

I'm afraid you have quite a few html errors on the page I tested (about us page) that really need to be fixed - and some of them are likely the cause of the browser rendering the pages differently.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.newpathstherapy.com%2Fabout.h tml
For example, you can only use an ID once per page.
Also a few CSS errors: - in particular the first one - where you have the missing # hash tag before the color declaration. The others relate to the styleing of the scrollbar - which isn't worth the effort really because is a PC IE only thing anyway:
http://jigsaw.w3.org/css-validator/validator?profile=css21&warning=0&uri=http%3A%2F%2Fwww. newpathstherapy.com%2Fabout.html
I think you have 'overwritten the code for the menu.. particularly the way you have used the IDS - which is causing an issue anyway. The menu can be made more simply and minimally styled with css - see this list of styling list menus:
HORIZONTAL / VERTICAL MENUS:
http://css.maxdesign.com.au/listamatic/
You need to fix those errors and then see how the page stands. If you have further problems after the 'fix', then post back.

Converting .PES files for DVD burn.

I have been extracting .PES files from my personal video recorder.
I want to burn these files to DVD on my Mac (10.4) but I can't figure out how to do this. Quicktime won't let me view these files but I can view them files using VLC player but exporting to a format that my copy of Toast 8 recognizes is proving very tricky. Can anyone suggest a way or any software that will let me convert .pes files to something toast or quicktime will read?
Many thanks,
Julian

I received the email notification of your original post which read (and I taking the liberty of quoting it as it is interesting) and which I assume you edited:
Embroidery no, but I do sometimes think that it may be a more worthwhile skill to learn instead of messing about with my mac. .PES stands for Packetized elementary stream and you can read all about them here: http://en.wikipedia.org/wiki/PacketizedElementaryStream
I have no idea on how to convert those files, but you could try (depending on the file sizes) dragging the files straight to Toast to see if it will burn it to a DVD.

Converting MOV files For Best Results in DVD SP

I have about 60 .mov files between 20-80 MBs that I want to burn to a DVD in DVD Studio Pro. What would be the most efficient way to go about converting these files to fit onto a regular DVD? (I don't have a double layer DVD.)
I had originally converted some of the MOV files to DV with MPEG Streamclip, but since that makes each video 1-1 1/2 GB each, I stopped. I figured I could recompress the videos in compressor, but I'm not sure what the best method is to go about this.

If you want them to be playable in a DVD player convert then into mpeg and AC3 files using Compressor (one of the defaults will be fine.). If you just want to store them, put a disc in the computer and drag the files to the disc then burn.
o| TonyTony |o

How can I convert .mov files for use with other apps?

When loading movies taken on a friend's digital camera to my PC, the video files were saved as Quicktime .mov files. I am now unable to pull those files into any other software program (I want to put them onto a CD or DVD and play on external players.) How can I convert .mov files to a .wmv or .avi or mpeg?
Thanks - J
RS720G Windows XP

Kodak Digital Camera QuickTime MOV Problems
After battling a number of serious problems with the videos taken by my new Kodak Digital Camera, I decided to write up this page so that anyone searching the web would find out the true answers without as much grief!
I’ve also made some other comments about my experience with the camera, in case anyone was considering buying a Kodak camera in the near future.
I bought the camera just before Christmas 2004 in the US. At the time of writing, it is a pretty good model for domestic use—about 5.2 megapixels, costing about US$400 (or AU$600 back here in Australia). From a company as reputable as Kodak, I expected no problems.
The first disappointing thing was that the spring inside the spring-loaded battery clip, inside the camera, came loose within days. It proved impossible to reattach it without completely dismantling the camera, which (despite my engineering qualifications) I was not willing to do. This would usually have been a warranty item, but Kodak’s warranty does not extend to other countries. I’ve since had to jam cardboard in to keep the battery clip engaged, and have taped the battery bay shut to avoid it opening accidentally when taking the camera out of the case. This works fine with the docking station (an extra AU$100!), but it means I can no longer charge the battery without the docking station (since you need to take it out to charge it). I was not impressed!
The camera takes good photos, and I have no complaint with that. The controls and camera menus are well-designed. The large display is excellent.
The EasyShare software is not as easy to use as it looks, has a habit of crashing, has a web update program that is always running in the background of Windows, and transferring images is nowhere as easy or quick as it should be. I’ve now uninstalled it completely, and simply copy the photos directly from the device. (If the camera memory is nearly full, and you just want to transfer the last few photos, then it’s impossible to use the EasyShare software to browse the camera’s photos without it actually downloading the whole lot through the USB cable—and it takes forever! Copying from the device directly doesn’t hit this bug.)
The capability to take video using the camera was a great attraction when I selected it, and, if it worked properly, it would make it quite a handy little camcorder in its own right. With a 512 MB memory card in it, over an hour of video can be recorded at Video-CD quality (320 x 240 24fps video, 8 kHz audio). It’s not full digital video, but it would still be a pretty good feature for a US$400 camera. If it worked.
The first disappointing thing about taking videos is that the optical zoom cannot be adjusted while the camera is recording. It can only be adjusted between video sequences. I don’t know why this restriction was made in the design.
The real problems, however, start when you try to do anything with the video clips captured by the camera. Kodak has chosen to capture the videos in QuickTime format. This is fine—QuickTime is, technically, excellent—except that there is no simple way to convert QuickTime MOV files to AVI or MPEG or VCD. The Kodak software comes with a QuickTime player, so you can see the video clips on the computer you installed the software on—and they look good. Problem is that you can’t just dump those MOV files onto your Video-CD creator (it will usually want AVI or MPEG files).
It takes some time to realise that Kodak have not even bothered to include any software with the camera that can convert these MOV files to a more useful format. This is a serious PR blunder, and anyone bitten by this is unlikely to go near the Kodak brand ever again.
After some web searching, owners of these cameras generally find that the best (only?) freeware solution to convert MOV to AVI is Bink and Smacker’s RADtools program.
RADtools is amazingly powerful for the price (i.e. free), but it hits two fundamental problems with Kodak Digital Camera MOV video files, that are the fault of the Kodak camera, not RADtools. (I know this because every other MOV converter hits the same problems—except one, as you will see below.)
The first problem is that the sound cannot be converted properly. When you convert any Kodak MOV files, there is an “aliasing” of the sound at the upper frequencies. This is a technical description—you get a whispery, tinny, C3PO type of echo to everything. It really destroys the quality of the video clips (especially bad when I am trying to capture priceless memories of my 4- and 7-year-old sons—I don’t want their voices destroyed for all time).
Every conversion program I tried ended up with the same audio problem. I concluded that it is something strange in the way the Kodak cameras store the MOV files.
Strangely enough, I noticed that the QuickTime player didn’t distort the audio like this. The audio sounds just fine through QuickTime. More on this shortly.
The second, more serious problem is that RADtools could not properly convert some of the video clips at all. (This problem only affected less than 10% of the clips I originally filmed, but most of those clips were very short—less than 20 seconds. It seems that the probability of this problem gets worse, the longer the clip.) RADtools would misreport the number of frames in the clip, and would stretch out a small number of frames of video (in slow motion) to match the length of the audio.
Again, I confirmed that this is a property of some of the MOV files stored by the camera. Other conversion tools also had problems with the same MOV clips.
After more angst, I found a number of websites in which frustrated owners of these Kodak cameras have reported the exact same problems.
It was only then that I discovered that QuickTime itself can convert MOV files to AVI. Believe it or not, it’s built into the QuickTime Player that Kodak supplies, or that you can download free from apple.com. The problem is that you can’t use it unless you pay Apple to upgrade to QuickTime Pro.
After realising that this would probably be the only way to get decent audio for these clips, I paid the AU$59 to Apple Australia to get the licence key that enables the extra “Pro” menu options in QuickTime.
Sure enough, you can “Export” any MOV file to a number of formats, including AVI. And guess what? The audio comes out fine!
So, the first piece of advice I can give is: pay Apple the US$29 (or whatever amount it is in your country) to upgrade QuickTime to QuickTime Pro.
From here, however, there are still a few snags to untangle.
The first is that the default settings for Exporting to AVI don’t give a great result. It defaults to the Cinepak codec, medium quality. This looks terrible compared to the original QuickTime movie. Even on maximum quality, that codec just doesn’t give good results.
I finally found that the best option is to use the Intel Indeo Video 4.4 codec, set on maximum quality. This creates AVI files that are 10 to 20 times larger than the original MOV files, but the quality is there. If (like me) you only want the AVI files so you can dump them into your Video-CD program, then you want to keep the quality as high as possible in this first step. The extra hard disk space is not really a concern. When your VCD program converts the AVI files to MPEG, it will compress them to the usual VCD size.
Now for the biggest snag: those problem MOV files are still a problem, even for QuickTime Pro. Unbelievably, these Kodak cameras are spitting out MOV files which have some sort of technical flaw in their data specifications. QuickTime is able to play them back fine—and that seems to be all that the Kodak engineers really checked. However, if QuickTime Pro tries to export them, then when the progress bar gets to the end, it never finishes. It just keeps going. If you check the output folder with Explorer, and keep hitting F5 to update the file listing, you can see the file getting bigger, and bigger, and bigger. It never stops.
That this happens even for QuickTime itself (the native format for these files) confirms that the problem is with the software built into these Kodak cameras. It would be nice it they issued a patch or a fix. I couldn’t find one.
Fortunately, there is a “workaround” for this problem. I found it when trolling the net trying to find solutions to all these problems. The workaround is to use QuickTime Pro’s cut and paste facility. Open the problem MOV file, then press Ctrl-A (the standard key combination for “select all”—in this case it selects the entire film clip, as you can see by the grey selection of frames at the bottom of the player). Then hit Ctrl-C (i.e. copy, which in this case copies all the frames, but not the incorrect data structure in the original MOV file). Now hit Ctrl-N (i.e. new, in this case a new MOV file or player). In this new player, press Ctrl-V (i.e. paste). Now you have a new version of the MOV file with the bad data structure exorcised. You can save this under a new name, but make sure you specify “Make movie self-contained”—otherwise, it will simply be a link to the original (bad) MOV file, which you are probably going to delete once you save the exorcised version. (You also cannot overwrite the original file, because it needs to access that to make the “self-contained” movie. You need to give it a slightly different name, save it “self-contained”, then delete the original and rename the new copy back to what you wanted it to be. A pain, I agree, but at least the **** thing works—finally!)
The exorcised MOV file can now be used to Export to AVI format. (I also keep all the MOV files on a separate CD, in case I want to reconvert them to a different format in the future. I figure it’s better keeping the exorcised ones than the haunted ones.)
So I hope that all this answers a few of your questions. No, you weren’t being incredibly stupid.

Convert dvd file for web ...

Similar Messages

Maybe you are looking for