Convert EBS RDF to XMLP - anyone had any success with the converter

I have converted the ARXCAR rdf to XML Publisher which was surprising simple. However getting it to work seems to be a different matter. The PL/SQL contained multiple bugs which were easily fixed. The dataTemplate contains lexicals for KFF's which don't work and I have already posted a message here and raised a TAR. Working round the lexical issue I ran into a NULL POINTER EXCEPTION dead end.
The base report for this conversion is not overly complex in the EBS scheme of things and I am just wondering if anyone has had any success in converting EBS reports with this utility?
Cheers,
Dave
Cheers,
Dave

Hi
This phone is very bad choice.
Apparently nokia pc suite isn't compatible with this phone.
I still wait for fix.
Good luck.
Click link under for another discussion from the same problem in this forum.
/discussions/board/message?board.id=pcsuite&message.id=36954&query.id=119523#
/discussions/board/message?board.id=pcsuite&message.id=35640&query.id=119909#M35640
Message Edited by jusking on 29-Aug-2009 04:01 PM

Similar Messages

TS1702 Has anyone had any issues with the app scramble with friends after updating to iOS 6. The touch screen is not responding properly when selecting the tiles but worked fine before the update

Has anyone had an issue with the app scramble with friends after upgrading to iOS 6. Tapping the screen will not select the tiles and hold them.

Yes I am having the same problem. I can't find any info about it and nothing seems to help. I am just posting this in hope that if it's a wider problem, there will be a quick solution.

Has anyone had any problems with the 10.0.3 upgrade?

I'm running WinXP and presently have Adobe Reader 9.4.3. Before I upgrade I would like to find out if anyone has had any problems with the new release? The last time I upgraded an Adobe product (Flash) it screwed up my ability to watch videos on my browser.
Any information would be appreciated.
Thanks,
Spin45

Adobe Reader has the original 10.0.0 with its associated vulnerabilities and the patch of 10.0.1 which seems unable to run in protected mode in my environment or any that have roaming profiles. The vulnerabilities that prompted the last two patches (would have been 10.0.2 and 10.0.3) have been forgone by Adobe, because "Protected Mode mitigates those vulenrabilities". See here: http://www.adobe.com/support/security/bulletins/apsb11-06.html
and here: http://www.adobe.com/support/security/advisories/apsa11-02.html
In my opinion, Reader X is not ready, they are soliciting for testers for a new release. Version 9 with its attendant problems seems to be the only viable solution for me, if I can get the patches to apply properly, and the installer to work properly.

Has anyone had any problems with the latest upgrade for iPad?

I have an iPad 1 and am being prompted to upgrade to the latest version software. Has anyone had any problems when doing this? Our PC runs on Wndows 7.
Having just resolved iTunes not connecting to the store after the recent upgrade, I'm reluctant to do something that could potentially screw up the iPad which does what we want as it is.

bobtheblob wrote:
Ok, thanks for that. I'll hang fire for the moment & see if anyone else has any comments.
That's probably a good idea. If you are happy with the system as is, I'd wait to upgrade. I can report that my friends and family have mostly upgraded to iOS 5 without any problems, but as you can probably tell from other posts on this board, lots of people have run into problems.
As the old saying goes, if it ain't broke, don't fix it!

Has anyone had any success solving the stuttering problem in iTunes?

A few months ago, my iTunes began skipping after playing fine for twenty minutes or so. The skips or stutters then get closer and closer together until it is simply unlistenable. A restart finds the tunes that skipped before now working fine, but with new ones eventually stuttering. My RAM and HD space are in good shape. Advisors have offered assistance, but to no avail. (Neither was familiar with the problem). Judging from the number of entries one gets when Googling "iTunes skipping", I'd say this is a well-documented problem, yet nobody connected with Apple seems to know exactly what I'm talking about. I've tried fixing permissions, re-installing Snow Leopard, resetting PRAM, safe-booting; my next step is uninstalling and re-installing iTunes, which disheartens me because of all the people who have tried it to no avail. Any ideas?

To be honest if you had experienced it you would know exactly what i am talking about. I am running a top of the range retina display and get a bad laging issues when doing something a simple as maybe changing the volume of a kick in ultra beat and it will freeze for 30 odd seconds. it shouldnt be happening with such a powerful machine. I have reinstalled it, i have tried it in loew res i have tried it in 64 bit all of which still have the same issue. Even after being in to the apple store and being on the phone numerous times i still havent come to a conclusion therefore i was trying to gauge if anyone else had the same issues or if apple just need to hurry up and release an update.

Has anyone had any trouble with the Move tool in Photoshop (v14.2.1)? I'm getting a dimmed bounding box akin to the transform bounding box, but this one won't let me apply or escape.

Having trouble suddenly with the Move tool creating a bounding box that wont let me release it by any means. It remains there no matter what, and now I'm having trouble using the Paste Into command.

Are you trying to move a background layer by any chance or a layer that is partially locked?? If you have show bounding checked in the option bar you should see the bounding box.

Am having a problem locating autocad lt 2012 edition on mac app store. anyone had any success with this. all the websites state that it has been launched on mac app store last week

has anyone been able to purchase the autocad 2012 lt edition that apparently is available on mac app store. dont seem to be able to find it?

This article was posted on August 16th: http://blogs.wsj.com/digits/2011/08/16/autodesk-adopts-apple-app-store-for-mac-s oftware/
Perhaps this coming Tuesday.

Has anyone had any problem with the multi choice tick boxes on a windows computer?

I have just created a form with check boxes on my iMac, emailed it to a windows based account and found that the check boxes don't work in windows explorer. Has anyone else had this problem?

If your Mac is truly running MacOS 10.2.x, you are limited to using 128-bit WEP security - WPA is not supported.
On the Linksys router, select 128-bit WEP and enter a passphrase. The router will generate, from the passphrase, four hexadecimal-format WEP keys. Copy down the FIRST of those four WEP keys - and use that WEP key on your Mac when prompted.

Has anyone had any success with an external antenna on a UMW190?

Although I am getting good service from my UMW190 without an external antenna, I am in a low signal area and would like to have rock solid coverage.
I have tried a 1900Mhz yagi, a blade antenna, an omni, and a grid antenna. I am not seeing any difference in signal strength at all regardless of whether or not an antenna is connected and which way it is pointed. I have also tried two different pigtails form two different sources, and even borrowed a second UMW190 and tried it, all with no success. I know exactly where the tower serving my house is located, but I did try each of the directional antennas in a full 360 degree circle, stopping every few degrees to see if the RSSI improved. I tried both polarities too, although I understand it should be vertical.
When I contacted Verizon customer support they had very little information about it. I contacted Pantech, and they told me that support for this device is now handled by UTstarcom. UTStarcom told me that support for this device is now handled by Personal Communication Devices. When I contacted them the response was (and I quote) "We don't have any information on any external antenna support of our devices".
So I throw myself on the mercy of the Gurus here in the forum.
Am I missing something obvious? Is there a command that "activates" the external antenna connector? Does the connector even have anything connected to it inside the modem?
Any guidance on this would be greatly appreciated!
-Rick

Usually the external antenna works best where service is obstructed by certain materials and the external antenna is placed in a different area . If the signal is steady for the external antenna and the UMW190 in the area where you are using the devices, that would be the general signal strength of that area.
The recommend accessory for your device can be found at the link below:
Copy and paste the link below into your browser's address bar.
http://www.verizonwireless.com/b2c/store/accessory?action=accessoryDetails&archetypeId=11424

Has anyone had any issues with the most recent update?

I just did the latest software update for my Apple TV, and now the little light is blinking fast, and the only picture on the screen is of the Apple TV with a white cable leading to the iTunes icon. Any ideas what's going on with my Apple TV? I tried unplugging it, but it didn't change a thing.. Any ideas or suggestions on the way ahead are much appreciated!
Thanks

The microUSB cables are fairly common... most portable electronics today use them for file transfer/charging.
If the user does not own one, they can be purchased from most retailers fairly inexpensively.

Has anyone had any issues with the sleep indicator light?

I have a 15.4-inch MacBook Pro 2.8 GHz (Late 2009) and recently I have noticed some issues involving the sleep indicator light and my Mac sleeping.
I learned that the sleep indicator light is supposed to be on when you press the power button until the chime sounds and then its supposed to be recognized when the computer sleeps or when the lid is closed.
Lately, the sleep indicator light has not be working when the computer boots (it still chimes), when the computer shuts down or when the computer is sleeping. The computer still sleeps if you close the lid, but it acts up when you don't and use the Apple menu (Apple > Sleep), keyboard shortcuts (CmdOptionMedia Eject) or use the power button and select "Sleep". Usually when I use this method instead of closing the lid, the authentication login window appears and when I click "cancel", the computer sleeps.
But still the sleep indicator light does not appear any time. I'm wondering if I need to get my Mac serviced. I still have a 2-year Best Buy Geek Squad warranty on the MacBook Pro.
+It is weird that this is happening to me, cause my computer is only 1 year and 4 months old.+
Is there anything you know that would help fix this issue.
Message was edited by: studabaker
Message was edited by: studabaker

The microUSB cables are fairly common... most portable electronics today use them for file transfer/charging.
If the user does not own one, they can be purchased from most retailers fairly inexpensively.

Anyone had any experience with the Samsom C01u?

I've been seeing this microphone about but I'm hearing distressing reports on its compatibility with Macs. Any first-hand users?
G5 2.3 mhz Mac OS X (10.4.3)

It's the convenience issue that interests me most. My daughter is a flautist and she likes to record her practice sessions onto her laptop so she may analyze them afterward. Setting up a condenser mic and a preamp and a phantom power source becomes cumbersome (and her mother complains about the spaghetti tangle of cables and interfaces in her practice room/guest room). She'd like something that doesn't require a recording engineer to be on hand. She doesn't want to make professional quality recordings. The quality of the recording should be good enough, however, where it might be used as an audition.
g5 2.3 ghz Mac OS X (10.4.3) 2.5 ghz ram

Anyone had any success with rapid install of NW14 on SQL2005?

Folks,
I installed NW14 on a clean machine. However, I still cannot get SAP to communicate with SQL 2005 correctly. I would appreciate it if someone could help me.
Here is what I did:
1. Created a new virtual machine with enough RAM and hard disk.
2. Installed Windows 2003 (with the latest service pack)
3. Installed SQL 2005 (with the latest service pack). Picked the right collation order required for SAP.
4. Installed JDK 1.4.2.17
5. Went through SAP rapid install for Windows and SQL Server.
The installation went through fine. I did not have even one error. After the install, I could see that instance 0 and instance 1 are both running. Green indicator under MMC.
I could also logon to the portal from the local machine.
The problem is that I could not connect using SAP GUI. The error I get is port sapdp00 is not found.
Services file does contain this entry.
When I run netstat, I can see that sapdp01 is available. However, sapdp00 is not present at all.
On someone's suggestion, I ran r3trans -d. The error I got was that dbms/type is not defined.
I set the environmental variable DBMS_TYPE to mss and ran r3trans once again. This time, the error I get is that it is not able to load dbmsslib.dll.
I shouldn't be running into such problems. I am wondering if I missed some major step after the rapid install. Is there a post-install configuration I need to run?
Thank you in advance for your help.
Regards,
Peter

Did you try a Reset while it is connected to the wall charger? Hold down the sleep and home buttons, ignore the OFF slider if it appears, wait for the Apple logo. Should take about 10 seconds, leave it on the charger for about 30 minutes before trying this.
If that doesn't work get it serviced/replaced.

SOLVED - Has anyone had any problems with xorg 1.11.14-1?

Last night I had a double catastrophe. The first was nothing to do with Linux, but was the result of a rogue drive trashing my sata ports and killing both Arch and Windows. I managed to rescue Windows, but since Arch was running at the time (and updating) nothing I tried could bring it back. After restoring from a backup (10 days old) I started the updates again (a gargantuan 415Mb) which completed, though after a reboot X failed to start. Nothing in the logs, and no activity at all. My usual fix is to remove xorg.conf and reboot, which will generally get me to the desktop to troubleshooting stage using vesa drivers instead of catalyst, but even this couldn't get me to a desktop. I tried removing catalyst altogether from single user mode, but nothing would fix.
I restored the backup again, and did all updates except kernel, catalyst, and xorg. Everything worked fine, so next I updated catalyst - still working. A fresh backup and I updated the kernel. Still working, which means the only thing not updated at this point (and in my mind the most likely culprit for the failures) is xorg.
Now I'm not daft enough to try updating before I make a fresh backup (I've remade several tweaks to my system that got lost after the original crash), but before I go to the trouble, I wondered has anyone else had any problems with the updated xorg?
For info, I'm running on a Phenom X4 965BE, AMD 4670HD with catalyst 12.1, kernel 3.2.2-1.
TIA
Last edited by Roken (2012-02-06 00:30:59)

Any idea where the problem was?
X also fails to start for me now, when the catalyst driver is loaded. It used to work before, but after recent upgrades and changes to the system it's somehow broken.
(Same catalyst and xorg versions as you mentioned, but with kernel 3.2.4-1)
Switching to the open-source radeon driver makes X start fine, switching back to catalyst breaks it again.
Last edited by sas (2012-02-07 16:02:50)

Has anyone had any problems with their charger blowing out?

Has anyone had any problems with their charger blowing out? mine blew, there's now a charred pin on the charger and in the socket of the macbook. The plastic around the charge socket is also cracked & distorted from the blow-out. It wasn't a power surge as no other electrical items were affected. It wasn't liquid or dust, as I'm the only person who uses it & I'm very careful. I'm concerned that the consequences could have been terrible. I wasn't present when it happened though, I can just see the evidence after the event.
I have a mid 2010 13" Macbook running the latest software & use the original magsafe charger that came with it.
Will I have to fork out for a costly repair or is there a safety issue that Apple will sort out for me?
Any advice would be much appreciated.

Everything in the box with iPhone is covered by the iPhone warranty ,go to Apple genius bar before warranty expires

Convert EBS RDF to XMLP - anyone had any success with the converter

Similar Messages

Maybe you are looking for