Convert effects from older Logic songs

Hello,
I've got a problem with my Logic songs created in Logic 4.8.
If I open one of these songs all of the audio effects in the mixer
are crossed out – also if similiar or equals are integrated but just
have another name (for example: "SDly" in 4.8 is now in Express 7
"Stereo Delay" with nearly the same interface).
Have I got any chance, to convert these effects or read out the
settings so that I can use them in the same way as before?
Thank you for your help and excuse my maybe bad english...
Regards – derkrebs
G5 1.8 GHz Dual Mac OS X (10.4.8) Logic Express 7.23

Thanks for all responses.. Don't think mine is a space problem, alot of these tracks have hardly any instruments on to open. I am using Logic Pro 6 if that makes a difference?

Similar Messages

Converting files from older mac to newer pc

We have just replaced our older mac with a new Dell pc. My music files are all sitting in a separate hard drive. If I download itunes to the pc can I just then target the folder/my music from itunes and it will work or does the music need to be reconfigured in some way?

*About 1000 of my songs had their format changed to wma and now when I click on one of them it tells me it can not find file*
iTunes for Windows cannot play WMA files but it can convert them. You need to locate the file or files in their folder and drag it to iTunes.
*Also itunes does not see my daughters nano. Is there a way to tell itunes to liik for an attachment.*
Is the iPod formatted for Windows have you tried Resetting the iPod while it's connected to your PC? That usually works for me when iTunes fails to pick up one of my iPods first time around. Toggle the hold switch off and on a few times then hold down the MENU and SELECT (centre) buttons for five or ten seconds until you see the Apple logo appear then the menu button to go to the normal display: How to reset an iPod
Message was edited by: Zevoneer

Older Logic songs won't open..

Hi
Recently, when trying to open song files that opened fine a few months ago, I get the usual Logic startup stuff - checking midi instruments etc. - and then I get the multicoloured spinning wheel, which stays there until I have to force quit. So basically the songs don't open..
I tried removing plugins from the audio library on my hard drive but to no avail. My plugins are legal copies too.
Any suggestions?
Thanks

Thanks for all responses.. Don't think mine is a space problem, alot of these tracks have hardly any instruments on to open. I am using Logic Pro 6 if that makes a difference?

Logic playing delay effect from instruments at start of song PLEASE READ

Hi there,
I have had this strange problem where when i bounce the song I get weird delay or reverb effects from one of the tracks/instruments that comes in at the begining of the track.
almost like the delay and reverb tail at the end of the track appears at the begining. can anyone explain why logic is doing this?

We were discussing this earlier, it has to do with Logic emptying it's buffers. A quick start stop should get rid of it...

How to convert from Logic 7.2 to older Logic on PC

I met a producer who wants to work his magic on a track of mine. He uses an older Logic on a PC. I assume I'll give him all my tracks as audio files (Wave?), but it would be nice to keep the MIDI regions as well. Any suggestions for the best process for this?
Thanks in advance!
George

Export a MIDI file containg the tempo, and any MIDI regions, together with the audio files exported track by track starting from 1 1 1 1, together with some docs to tell the guy what's included and what goes where etc.

Convert.ToByte and logical masks, from VB to LabVIEW

Hi guys,
I have to write a VI communicating via RS232 with a microcontroller for a PWM application. A colleague has given me the GUI he has developpd in VB and I would like to integrate it into my LabVIEW programme by converting the VB code into Labview code. Here's the code:
Private Sub LoadButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles loadButton.Click
        Dim bufLen As Integer = 12      // Buffer length
        Dim freq As Integer = 0      // frequency
        Dim pWidth As Integer = 0      // pulse width
        Dim dac As Integer = 0       // Value used in oscillator setting for generating pulse frequency
        Dim addr As Integer = 0      // Address of the pulse width in the pulse generator.
        Dim rTime As Integer = 0      // duration of machining/pulse train in ms.
        Dim returnValue As Byte = 0      // A variable for storing the value returned by the
//microcontroller after it receives some data
        Dim buffer(bufLen) As Byte       // creates an array of bytes with 12 cells => buffer size = 8 x12 = 96 bits
// can you explain a bit please I know you're converting the entered values into byte and put them one by one in a specific order. This order is how the
//microcontroller expects them
            addr = (Floor((pWidth - Tinh) / Tinc)) // Formula from hardware, calculates address setting for pulse generator to set pulse width.
            buffer(0) = Convert.ToByte(Floor(3.322 * (Log10(freq / 1039)))) // Caluclates OCT value for use in setting oscillator for pulse freq.
            dac = (Round(2048 - ((2078 * (2 ^ (10 + buffer(0)))) / freq))) // Calculates DAC value for use in setting oscillator for pulse freq.
            buffer(1) = Convert.ToByte((dac And &HF00) >> 8)                         //
// &H is the vb.net to tell it its hex code, F00 gives the top 4 bits from a 12 bit value.
            buffer(2) = Convert.ToByte(dac And &HFF) // For values that are larger than 256 (8bits) the value needs to be split across 2 bytes (16 bits) this gets the //bottom 8 bits. &H is the vb.net to tell it its Hex.
            buffer(3) = Convert.ToByte((addr And &HFF0000) >> 16) // This value may be so large it requires 3 bytes (24bits). This gets the top 8 bits.
            buffer(4) = Convert.ToByte((addr And &HFF00) >> 8) // This gets the middle 8 bits.
            buffer(5) = Convert.ToByte(addr And &HFF)// This gets the bottom 8 bits.
            buffer(6) = Convert.ToByte((rTime And &HFF0000) >> 16) //This value may also be 3 bytes long.
            buffer(7) = Convert.ToByte((rTime And &HFF00) >> 8)
            buffer(8) = Convert.ToByte(rTime And &HFF)
            buffer(9) = Convert.ToByte(2.56 * ocpBox.Value) // The ocp pulse period is formed of 256 steps or counts, so if a percentage is requested, this formula gives the number of steps/counts required to set the pulse width
            buffer(10) = Convert.ToByte(tempBox.Value)
            If (tempCheck.Checked = True) Then
                buffer(11) = 1
            Else
                buffer(11) = 0
            End If
            freq = ((2 ^ buffer(0)) * (2078 / (2 - (dac / 1024))))
            pWidth = Tinh + ((((Convert.ToInt32(buffer(3))) << 16) Or ((Convert.ToInt32(buffer(4))) << 8) Or (Convert.ToInt32(buffer(5)))) * Tinc)
            ' Connect to device
            serialPort1.Write(1) // Sends the number 1. This tells the microcontroller we are about to start sending data. It should respond with a zero if it is ready
//and the connection is good.
The line "serialPort1.Write(buffer, 0, bufLen)" sends the buffered data where the variables are: buffer = the buffered data; 0 = the position in the buffer to start from; bufLen = the position in the buffer to stop sending data.
What's the best way to deal with the Convert.ToBytes and the logical masks And ??
Thanks in advance for your time and consideration,
regards
Alex
Solved!
Go to Solution.

Try this
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

TS2830 When I synch my phone or other devices to itunes, I get a message that the following songs could not be synched to itunes because the file could not be converted. However, these are songs that I bought directly from Itunes. Any suggestions?

When I synch my phone or other devices to itunes, I get a message that the following songs could not be synched to itunes because the file could not be converted. However, these are songs that I bought directly from Itunes. Any suggestions?

Hello rafagee,
I understand that you are not able to sync a few songs you purchased from iTunes to your iPhone and other devices. There may be an issue with the file, but if you have the Apple ID and password used to purchase the songs, you can redownload them. You can even download the song directly to your iPhone. I found an article that will give you steps to do this on your computer and on your iPhone:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Why can't i delete songs from older i-pod touch, delete feature greyed out and right click or holding control and clicking do not offer delete option

Why can't i delete songs from older i-pod touch, delete feature greyed out and right click or holding control and clicking do not offer delete option in I-tunes. I've tried using both a Mac Book and PC with newer and older versions of I-tunes.

It sounds like you are try to delete the songs by connecting the iPod to other than the computer from which the songs were synced. You can only delete songs synced to an an older iPod (pre iOS 5) by connecting the iPod to its syncing computer and unsync them.
If you want to change syncing computers see:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Reason - multiple stereo rewire to logic song templates anyone?

Hi,
I'm a recent convert to (intel) iMac/Logic Pro/Reason from PC/Cubase/Reason.
After a whole weekend of head scratching, manual reading & forum browsing I've finally managed to set up a working environment with reason 3.05 rewired to logic - I have setup the main stereo L&R & Multiple mono channels from reason as well as a number of internal rewire objects to act as instruments.
I've read that its possible to go further & actually create rewired 'stereo' channels, which only need 1 effect added per pair. As far as i can understand this is done by creating two mono channels, panned hard L&R then linking to aux object/buss object then only making the aux (or buss?)object available in the arrange/track mixer page?
Only thing is.. i can't get these stereo channels to work - As i mentioned, I'm new to MAC & logic (although have studied manual in depth) so it may be a rudimentary error in my environment set up or my understanding of aux/buss object behaviour, but i need to get working with reason asap so wondered if anyone has done this already & could either post a simple walkthrough or maybe email a song template so i could copy & paste the stereo rewire layer?
I've already found a page online for some one (http://www.stormchild.net/music/reasonwithlogic.html ) who had done this but with Logic 6 but doesn't seem to work with my intelmac & logic 7.2.1 (& in fact when i loaded his autoload it 'removed' my focusrite saffire from available interfaces & i had to unplug it & restart the mac to get it back)
Any help would be much appreciated
Adam
Intel iMac 20' Mac OS X (10.4.7)

Hi,
Apostol, I do a ton of midi programming & although I'm a massive reason fan the sequencer doesnt do it for me - I've used reason for sounds & beats very happily rewired to cubases sequencer (on PC) for years now.
Got Guitar, I'm impressed (if a little scared!) at your local knowledge of my little hometown, & thanks for the book recomendation & offer of your templates. The rewire templates in logic (on 7.2.1 at least) don't deliver the goods for reason, at least with my intel iMac.
I've since sucessfully set up an environment with a number of mono chammels (& L&R rewire on masterL&R) which works well in that it shows the reason device name in the channel menu on arrange page but it's just creating these 'stereo' tracks that i'm stuck on.
I think I have made some progress late last night as follows.... Obviously reason (with the exception of hardwire interface 1&2 (L&R)outputs isn't designed to output in stereo but so far I've created a number of 'stereo tracks' (2 x audio objects panned L&R), assigned their channels to reason hardware interface outputs 33-34, 35-36 etc etc, & I've then connected each of these 'panned pairs' in the environment to a stereo aux object by assigning the in/out on their audio objects to a buss number then assigning this buss to the relevant aux (so i only have to use one effect/fader per pair).
This setup works great in that i just need, in reason, to assign an instruments output directly to the suitable hardware interface outputs (ie 33-34) & it plays through this new stereo pair.
All i need to do now is to 'clean up' this set up so i can only see these single stereo aux's in my & track mixer (& arrange page if possible?) so there aren't 3 x tracks showing as playing per instrument? - I feel like i'm nearly there, anyone able to help with this last chapter in the saga????

Cannot Play Older Purchased Songs in iTunes

I am having a real problem with some songs that I purchased from iTunes a while ago. Recently my computer was having some problems. The screen would not turn on but the computer would work normally. I brought in my computer (a 2008 15 inch MacBook Pro) to the Genius guys and they fixed it by putting in a new motherboard and a new screen. Ever since then I have been having problems with certain songs on my iTunes. Between the years of 2004 and 2007 I purchased a total of about 70 songs on iTunes but with an older 2004 MacBook Pro. For the last month since my computer was fixed those songs no longer are able to be played on my computer but they still show up in my iTunes playlist. They have since though been deleted off of my ipod. iTunes is saying that those songs need to be authorized in order to play them so i deauthorized my computer and then waited a few minutes and reauthorized the same computer and the error message was still being displayed. The rest of my iTunes playlist including songs I have purchased in the last year are able to be played. I would like to be able to play all songs in my library. Is there anything I can do to fix the situation?

I am a new MAC user and just converted my iTunes over. I do have some songs that were purchased on my PC but I have moved often so my user name was changed based on email addresses. How can I gain access to those older boughten songs. I have about 100 and of course they are my favorite. Thanks, any help would be appreciated.

How can I convert files from pages 08 files without pages 09?

I am extremely dissatisfied with the latest iWork (13?) applications. My 2008 MacbookPro crashed on me, so I purchased a new 15" MacbookPro last month. Due to a known issue that prohibits my new Mac from being restored from my Time Capsule backup (thanks, Apple...), we finally got it worked out so that all my files were restored, but I had to reinstall my applications as I could find them. I had iWork 09 on my old machine, but it was from a family pack years ago, for which I do not have the discs. So, now I don't have Pages 09 to convert all my older files (I had no legitimate reason to convert my graduate work from 08 because it all worked in '08 and '09) so that I can open all my .pages files in Pages. Why would Apple make Pages that cannot open .pages files?! This is quite frustrating, and I'm hoping someone has an answer for how to convert .pages files from iWork '08 so that I can open them in the latest Pages without having to purchase iWork '09 (AGAIN!). Apple is really ramping up its leaving people behind...

Those are your choices.
Buy iWork '09 which is a good solution or somehow reinstall Pages '08 so you can export to Word .doc/x files.
We warned long and hard that not updating to Pages '09 would eventually lead to Pages '08 being left behind, although Apple was particularly ruthless the way it finally did it.
Also that anything using Apple's proprietary formats is going to end up with the same fate.
Peter

Realistic Page Turn Effects from a PDF document

Is there a way to create animated page turn effects from within Acrobat or in combination with Flash?
I would like to create books, magazines, brochures that have hot links to other pages within the same document, web links, and multimedia capabilities, but which display animated page turns. Something along the style of http://page-flip.com/products.htm
Ideally, I would like to create the documents in various programs, and then turn them into a PDF with the hot links and multimedia capabilities. I then want them to display as a Flash video with the animated, realistic page turn effects, along with pagination and zoom controls.
There are software programs available that will do this but they cost big $$$$. Is there a way to export/print/save a PDF file to a SWF format and automatically have the page turn effects added?
I have CS4 with Acrobat Pro and Flash Pro. I found a couple of Flash extension that appear to do this but they are clumsy to use and I am not very experienced with Flash and ActionScript. I am looking for an easy way to accomplish this, hopefully, right from within Acrobat.
Thanks in advance for your suggestions.
Dan

Adobe CS5 support animated Flash and movies in PDF files, you can visit the home page for detail. When it comes to convert PDF to SWF with Page-Flip effect, Adobe didn't work that good. I recommend convert online at http://www.axmag.com/submit.html , this seems to be free.

Receiver service ??? cannot be converted into an ALE logical system

Hi,
I am hoping for some help with an Idoc issue in XI version 3.0. The scenario is like this:
Flat file->File adapter->XI->Idoc adapter->R/3
I have configured a scenario in one system like this that works fine. But in the current system I am getting the error message "Receiver service ??? cannot be converted into an ALE logical system" from the Idoc adapter.
As it is XI 3.0, I have set the Agency and Scheme in the destination communication channel to <Service>, ALE#LS and in the destination party, I have created a alternative identifier <Service>, ALE#LS, SYSCLNT200.
I have configured an ALE logical system name in the SLD.
I have cleared the SLD cache in the integration builder.
The ALE logical system name was not in the SLD when the message first appeared, but I thought clearing the cache would fix that. I have not tried deleting the service and re creating it. That is my next step....if all else fails.
Not sure what else I haven't tried.
Can anyone offer any advice?

Thanks Sam Raju for the reply.
On your questions:
1. I checked IDX1 - port for the receiving R/3 is defined as SAPIR1_300 (port: SAPIR1 and Client: 300) and it is mapped to RFC destination of IR1300.
2. Checked RFC destination IR1300 - it is setup as R/3 connection and checked test connection and remote login and both are working fine
3. Checked IDX5 - did find one message (status is successful) corresponding to the file I am sending into R/3 and this entry is an Outbound entry.
Question: Should there be two entries here in IDX5 - one for inbound and the other for outbound?
May be I am doing something wrong here in setting up the interface mapping and endpoints. Anyway when I check the IDOCOutbound in the Soap Header, I see the following:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:IDocOutbound xmlns:SAP="http://sap.com/exchange/MessageFormat/">
<SAP:TABNAM>EDI_DC40</SAP:TABNAM>
<SAP:MANDT>100</SAP:MANDT>
<SAP:DOCNUM>0000000000008002</SAP:DOCNUM>
<SAP:DIRECT>2</SAP:DIRECT>
<SAP:IDOCTYP>FLIGHT_SAVEREPLICA01</SAP:IDOCTYP>
<SAP:MESTYP>FLIGHT_SAVEREPLICA</SAP:MESTYP>
<SAP:SNDPOR>SAPBXI</SAP:SNDPOR>
<SAP:SNDPRN>PRISM</SAP:SNDPRN>
<SAP:SNDPRT>LS</SAP:SNDPRT>
<SAP:RCVPOR>SAPIR1</SAP:RCVPOR>
<SAP:RCVPRN>IR1CLNT300</SAP:RCVPRN>
<SAP:RCVPRT>LS</SAP:RCVPRT>
</SAP:IDocOutbound>
Do you see anything wrong or missing here. SNDPOR is XI port, SNDPRN is the source partner (file) and RCV... information is all the receiving R/3.
I am suspecting that something is missing either here or in the endpoint setup.
Also, in the TechnicalRouting I have this:
- <SAP:address version="20">
<SAP:systemKey>IR1CLNT300</SAP:systemKey>
<SAP:endpointType>IDOC</SAP:endpointType>
<SAP:url>IDOC://SAPIR1?RFCDEST=IR1300&DOCREL=&VERSION=3&SAPREL=46C</SAP:url>
</SAP:address>
Any issues you see here in url?
Also, when I look on the XI server, I do not see these files deposited anywhere- so they are going somewhere (as the status in IDX5 is successful)!
Do I need to activate any queues or triggers anywhere.
Can you please offer advice and help us out.
Thanks again.
Srini
[email protected]

HT5409 can i convert movies from iPad to mac laptop

Ihave download a movie from ipad but it will not play on my mac air laptop with quicktime installed..??

Ihave download a movie from ipad but it will not play on my mac air laptop with quicktime installed..??
Are you going to give us any additional clues as to what you are really asking here?
1) The "HT5409" in your subject title reference implies you are dealing with AVCHD content. If true, then how did you transfer them to your iPad and how did you transfer them from your iPad to your your MacBook Air platform? As the HT409 topic clearly stated, this can be very important. In addition, how are the files stored? For instance , have you extracted the MPEG-4 AVC content as transport streams or is the content still in the device recorded file form? Are you trying to edit the content or convert it to M4V, MP4, or MOV files directly?
2) The "can i convert movies from iPad to mac laptop" part of your subject title is confusing. Yes, AVCHD files can be converted to simpler MPEG-4 AVC content that is compatible with all current and most older Mac computers and Apple mobile devices in MOV, MP4, and/or M4V file formats. However, how you do this will depend on the current form of the data and the target settings you wish to employ to ensure compatibility with the various target device possibilities. Further, non-AVCHD content (e.g., HD iPad video recordings) can also be downconverted to simpler settings in a similar manner if needed or required if that is your questing.
3) Depending on your operating system, both AVCHD and MPEG-4 AVC content should already be compatible with QT X v10.2 and v10.3 players if properly transferred to your laptop from the recording device. And, even if improperly transferred, may still be converted to useable/compatible formats as long as the file itself has not been corrupted by your, as yet, unspecified workflow.
4) What does "will not play on my mac air laptop with quicktime installed" mean here? Are you trying to play an AVCHD movie in the QT 7 player or one of the QT X players? If the latter, which one? Are you getting any error message? If so, what are they? If not playing in your main user account on the computer, does it play useing a different account? Do the files play in other, third-party multimedia players?
Basically, your question is the equivalent of my saying my car won't start but failing to mention whether or not I am out of gas, my battery is dead, or that I have removoed the distributor cap, wires, or spark plugs from the engine. To properly solve the issue we need all possible information that you can provide describing exactly what you are doing, how you are doing it, what is not working as your expect it should, and what your goals are. In cases where you cannot answer such questions, it is often helpful to simply post/upload a sample "problem" file and let other users here examine it to determine the problem and/or suggest a specific solution for your particular system/configuration combination.

My EZ Vinyl Converter software won't export songs to ITunes

Can't export songs from EZ Vinyl Converter to ITunes. Would prefer to Windows Media Player...either would do. Have tried all the tricks I know...but I'm still not very good on the pc. This software worked for me years ago. Please help.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your EZ Vinyl Converter software will not export songs to iTunes or Windows Media Player, and I would be happy to help! For further assistance in this matter, I recommend contacting Numark Technical Support to find out the requirements of the EZ Vinyl Converter software with MP3 playing software. Best Regards

Convert effects from older Logic songs

Similar Messages

Maybe you are looking for