Convert field type on screen..

i have a field on screen of numc type..but i wanted to display 0 on screen field.so i went to screen attributes
and changed the format to char type..now i can display '0' also..but i'm getting error like
" Invalid Field Format (screen error)"..now what should i do to remove the error?

Hi Anil,
Can you please advice me how u solved that problem.. because i am also facing the same problem but mine is table control.
Thanks and Regards,
Logu

Similar Messages

Field type for Screen Field

Dear all,
Actually i want to store Numeric Value with '+' or '-' sign in module pool's Screen Field.
how can i store that type of data.
currently i m declared as a decimal type variable.
but when value is coming with negative sign in internal table. dum error is occured like this...............
There was a conversion error in the output of fields to the screen.
The formats of the ABAP output field and the screen field may not match.
Some field types require more space on the screen than in the ABAP
    program. For example, a date output field on the screen requires two
    more characters than the corresponding field in the ABAP program. When
    the date is displayed on the screen, an error occurs resulting in this
    error message.
Screen name.............. "ZPPI_SCRAP_RECORD"
                  Screen number............ 9000
                  Screen field............. "T_ITAB-DIFF"
                  Error text............... "FX015: Sign lost."
    Other data:
Plz help me

Hi Anshuman Singh,
Is there any possiblity to adopt the following logic for your requirement?
Just declare a character field with length of maximum number of digit you want to input plus one.
Now input with '+' or '-' sign.
Before processing this value, check for only numbers except sign.
Now except that sign, assign or write the remaining value to the temprary varibale for processing.
Regards,
R.Nagarajan.

How to get the field type from the database dictionary in screen painter

hi,
I wanted to create a new input field that input field should have the data element from the structure that i have created. How to get the data field type from the database dictionary in the screen painter

hi
good
there is two kinds of evernt
PROCESS ON HELP-REQUEST
PROCESS ON VALUE-REQUEST.
which ll help you to give two types of help one is f1 help and another one is f4 help
go through this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/47/e07f622b9911d2954f0000e8353423/content.htm
thanks
mrutyun

How to add Material type(MTART) field on Selection screen of MB5B transaction code.

Hi All,
    Please let me know how to add material type field on selection screen of MB5B transaction
For that i made copy ZMB5B_COPY of original report RM07MLBD.
Thanks in adv .
Samadhan

Hi,
Once you copied the standard report to Z report, you can MTART in selection screen like below.
and in order to inlcude the same in programming logic, we have three option.
1) Check all related select queries, and include MTART in SELECT query using inner join with MARA.
2) In START-OF-SELECTION event fill MATNR as shown below.
3) If user entered any value in MTART, then before displaying the report just check material type of each material in the final internal table(which is used to display report) delete enteries from internal table accordingly.
START-OF-SELECTION.
IF MTART[] IS NOT INITIAL AND MATNR[] IS INITIAL.
    SELECT MATNR FROM MARA INTO MATNR-LOW WHERE MTART IN MTART.
      MATNR-OPTION = 'EQ'.
      MATNR-SIGN = 'I'.
      APPEND MATNR.
      CLEAR MATNR.
    ENDSELECT.
ENDIF.
The above option has one limitation: The selection screen variables has some restriction, please read the below thread.
Facing problem in select statement dump DBIF_RSQL_INVALID_RSQL CX_SY_OPEN_S
Getting Dump in the select query has more than 2000 entries
Hope this will work for you .
regards,
Rajesh Sadula.

Enable Functional Area field in PA30 Info type 0001 Screen

Hi,
I need to enable Functional Area (PA0001-FKBER) field in info type 0001 screen of PA30 and the functional area should pick up value corresponding to cost centre.
I unhide the field in T588M table, but still i dont see the field in PA30 Info type 0001 Screen,
Can someone please let me know what other settings need to be activated for enabling functional area in 0001 screen.
Awaiting quick response.
Thanks.
Sudha

Dear Shuda,
Please check the attached note 763962,798840,701933,755796 and 822157
Also,
If Funds Management and Controlling are updated in an integrated way such that the cost center is always the leading account assignment and the fund center is derived, the HR must not (and does not) support the maintenance of derived information (such as fund center). Thus there are the following three possible scenarios:
- Funds Management (FM) is not active. -> HR doesn't show Fund Center
- FM is active but without CO-Integration-> HR shows Fund Center
- FM is active with CO Integration -> HR doesn't show Fund Center
These scenarios can be maintained with time dependence (active from-dates): There can be a period for the first, a second time interval for the second and a third time interval for the last scenario.
Hope this help
Sarah

Font type of screen field

Hi experts
I added a new field to the screen but the font type of this field label is different from the font type of other field labels which are created by SAP.please tell me how to change my field label font.
Thanks
Regards
Giri.

Go to the screen painter SE51 and have a look at the Screen attributes for any standard field and compare your field. Go to the Display attributes to be specific.
REgards,
Ravi

Field UMSA1 cannot be converted in type CURR - long Text

Hi All,
I am getting the following error
Error records written to application log
Error in an arithmetic operation in record 489
Record 489:Contents 四川省长江滥曝扇备总 from field UMSA1 cannot
Record 489 :Contents 四川省长江滥曝扇备总 from field UMSA1 cannot be converted in type CURR ->lo
This happened for the customized master data Z********(customer number). Data source; 0CUSTOMER_ATTR
I have undertaken the following actions but all failed.
1. Replicated the data source, activated the transfer structure through a program and the load was run but the load failed with the same issue.
2. Pushed the data till PSA and tried to edit it in the PSA, but here too the load failed with the same issue.
It is understood that the data source 0CUSTOMER_ATTR is obtained from the Funtion Module: MDEX_CUSTOMER_MD
Out of 5 data packages, I could find only 3 data packages in PSA which are successful, the remaining had error and could not be found in PSA. Checked in R/3 but could not catch the correct record, since, did not had proper info. UMSA1 refers to Annual Sales, which are empty in R/3 and BW as well.
The UMSA1 field in data source 0CUSTOMER_ATTR in BW.
Data Type: CURR, Length: 15, Decimal: 2, curr/unit: UWAER
The UMSA1 field in R/3
Data Type: CURR, Length: 15, Decimal: 2
Request your timely suggestions.
Raj

Dear Veerandra,
I have already checked in R/3 as you had mentioned. But as I said earlier, could not catch the correct record, since, did not had proper info. UMSA1 refers to Annual Sales, which are empty in R/3 and BW as well.
I have undertaken the following actions but all failed.
1. Replicated the data source, activated the transfer structure through a program and the load was run but the load failed with the same issue.
2. Pushed the data till PSA and tried to edit it in the PSA, but here too the load failed with the same issue.
It is understood that the data source 0CUSTOMER_ATTR is obtained from the Funtion Module: MDEX_CUSTOMER_MD
3. Error Handling option.
Regards.
Raj

Cannot convert ÿØÿà of type class java.lang.String to class BFileDomain.

Hi All,
I am using Jdeveloper 11.1.2.3.0.
I have a scenario of making an ADF page where I have a IMAGE field to show on the page. So,I have a table called "PRODUCT" with fields called photo with BFILE type. Now when I the data i have inserted using the DML command and i can see the path at the backend.
However,when i am runnig my ADF page in the Filed called "PHOTO" I can only see a junk character stating 'yoyo'.
When I click on it, it says ERROR "Cannot convert ÿØÿà of type class java.lang.String to class oracle.jbo.domain.BFileDomain".
Your help will be appreciated ASAP.
Regards,
Shahnawaz

Hi,
did you show the id-value in the user interface as a input-component, and did the input-component include a converter?
If yes, show the id as output-text and remove any existing converter-components.
Best Regards

Fields missing in Screen 2000 for Infotype 580

Hi,
In PA30, when I go to create or change or display mode for an employee in infotype 580, there are only 4 fields shown. There should actually be over 10 fields in the screen. I checked the layout for the screen 2000 of program MP058000 in SE51 and it had all the fields there. In table T588M there was no entry with the module program name MP058000. I created an entry with this program for screen 2000, and chose the radio button Standard ( The first one) for all the fields that were there and still the screen in PA30 has only 4 fields.
Can anyone please help with this issue?
Additional Info: When i chose create or change for IT0580 in PA30 for an employee, there was a status message saying screen was modified, and that were i got the table name that i've mentioned above.
Thanks & Regards,
Pratheek Bhonsley

Hi Pratheek,
Please check the hiring date of employee to whom you are trying to enter and check the employee who joined before this financial year. If i am right, this info type screens are depends on hiring date of employee, if i am right..
At the same time, Please check the control record period also.
MVR
Edited by: MVRmvr on Jul 19, 2010 7:43 AM

How to modify a lookup field-type to use checkbox instead of radiobutton?

How to modify a lookup field-type to use checkbox instead of radiobutton?
I would like to modify the behavior for the lookup field.
Normally you get a screen where it is possible to search through a lookup. The items resulted from the search are listed as radiobutton items. Therefore you can select only one at the time to be added.
Is it possible to have the items to be listed as checkbox instead? So that you can check multiple items and therefore be able to add multiple items at the time?
For example:
To add the user to 10 different groups on MS-AD.
It is desired to have the ability to check multiple groups to be added instead only one at the time.
My client would like to use this feature in many other situations.

Displaying will not be a big deal but with that you have to customize the action class and its working as well.

How can I add a new field in selection screen for this report

*& Report ZGS_BARKODLA_HIZLI_GIRIS
report zgs_barkodla_hizli_giris.
tables: mara,
        mseg,
        mch1,
        *mch1,
        mkpf,
        mchb ,
        makt.
type-pools: esp1.
data: i_message_tab type esp1_message_tab_type,
      wa_message_tab type esp1_message_wa_type ,
      sc_count type i.
ALV
type-pools: slis, kkblo.
data: gs_layout   type slis_layout_alv                     ,
      gt_fldcat   type slis_t_fieldcat_alv with header line,
      gt_header   type slis_t_listheader   with header line,
      gt_sortin   type slis_t_sortinfo_alv with header line,
      g_repid     like sy-repid                            .
define add-fieldcat.
gt_fldcat-fieldname     = &1.
gt_fldcat-ref_tabname   = &2.
gt_fldcat-seltext_s     = &3.
gt_fldcat-seltext_m     = &3.
gt_fldcat-seltext_l     = &3.
gt_fldcat-reptext_ddic = &3.
gt_fldcat-ddictxt       = 'M'.
append gt_fldcat.
clear gt_fldcat.
end-of-definition.
types: begin of titab,
        sel   type xfeld,
        matnr type matnr,
        maktx type maktx,
        charg type charg_d,
        menge type menge_d,
        erfmg type erfmg,
       end of titab.
data : witab type titab.
data : itab type table of titab.
data : ok_code type sy-ucomm.
controls: tc_itab type tableview using screen 0100.
data: gv_header like bapi2017_gm_head_01,
      gv_code   like bapi2017_gm_code.
BAPI export parameters
data: gv_headret type bapi2017_gm_head_ret,
      gv_matdoc type bapi2017_gm_head_ret-mat_doc,
      gv_matyear type bapi2017_gm_head_ret-doc_year.
data : lv_objek like inob-objek .
data : ls_inob like inob .
data : imseg type ty_t_mseg.
data : wmseg type mseg.
data : answer.
data : count type i.
data : v_atinn type atinn.
BAPI movement details
data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
      with header line.
data: i_return type bapiret2 occurs 0 with header line.
start-of-selection.
call function 'CONVERSION_EXIT_ATINN_INPUT'
   exporting
     input = 'Z_ORAN'
   importing
     output = v_atinn.
call screen 100.
*&      Module status_0100 OUTPUT
module status_0100 output.
set pf-status '100'.
set titlebar '100'.
mseg-werks = 1000.
mseg-umwrk = 1000.
**added
sc_count = sc_count + 1.
if sc_count eq 1.
    mseg-bwart = 313.
endif.
mkpf-budat = sy-datum.
**added
describe table itab lines tc_itab-lines.
endmodule.                 " status_0100 OUTPUT
*&      Module user_command_0100 INPUT
module user_command_0100 input.
data field(20).
data: line_t like sy-index.
data: lines like sy-index.
data line_count like sy-loopc.
data: begin of cols,
         screen      like screen,
         index       type i,
         selected(1) type c,
         vislength   like icon-oleng,
         invisible(1) type c,
       end   of cols.
case ok_code.
    when 'DELE'.
      delete itab where sel eq 'X'.
    when 'ENTE'.
      check *mch1-charg is not initial.
      read table itab into witab with key charg = *mch1-charg.
      if not sy-subrc is initial.
        witab-charg = *mch1-charg.
        select single matnr from mch1 into witab-matnr
                           where charg eq witab-charg.
        if not syst-subrc is initial.
          set cursor field '*MCH1-CHARG'.
          message e115(12) with *mch1-charg.
        endif.
        select single maktx from makt into witab-maktx
                           where matnr eq witab-matnr
                             and spras eq syst-langu.
        witab-erfmg = 1.
        concatenate witab-matnr witab-charg into lv_objek .
        clear ls_inob .
        select single * into ls_inob
                        from inob
                        where objek = lv_objek and
                              klart = '023'    and
                              obtab = 'MCH1' .
        select single atflv from ausp into witab-menge
                 where objek = ls_inob-cuobj and
                       klart = '023' .
        append witab to itab.
**added
        clear *mch1-charg.
**added
      endif.
    when 'SAVE'.
      if mkpf-budat is initial.
        set cursor field 'MKPF-BUDAT'.
        message e055(00).
      endif.
      if mseg-lgort is initial.
        set cursor field 'MSEG-LGORT'.
        message e055(00).
      endif.
      if mseg-umlgo is initial.
        set cursor field 'MSEG-UMLGO'.
        message e055(00).
      endif.
      if mseg-bwart is initial.
        set cursor field 'MSEG-BWART'.
        message e055(00).
      endif.
      refresh imseg.
      loop at itab into witab.
        move-corresponding witab to wmseg.
        append wmseg to imseg.
      endloop.
      call function 'ZMM_POPUP_WITH_DATA'
        exporting
          imseg = imseg
        importing
          answer = answer.
      if answer eq 'Y'.
        perform create_goods_movement.
      endif.
    when 'P--'.
      clear ok_code.
      perform paging using 'P--'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P-'.
      clear ok_code.
      perform paging using 'P-'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P+'.
      clear ok_code.
      clear lines.
      perform paging using 'P+'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P++'.
      clear ok_code.
      perform paging using 'P++'.
      set cursor field 'MARA-MATNR' line 1.
    when 'SORA'.
      read table tc_itab-cols into cols with key selected = 'X'.
      if sy-subrc is initial.
        field = cols-screen.
        field = field+5(10).
        sort itab ascending by (field).
      endif.
    when 'SORZ'.
      read table tc_itab-cols into cols with key selected = 'X'.
      if sy-subrc is initial.
        field = cols-screen.
        field = field+5(10).
        sort itab descending by (field).
      endif.
    when 'PRNT'.
      perform write_alv.
endcase.
endmodule.                 " user_command_0100 INPUT
*&      Module read_table OUTPUT
module read_table output.
mara-matnr = witab-matnr.
makt-maktx = witab-maktx.
mch1-charg = witab-charg.
mseg-menge = witab-menge.
mseg-erfmg = witab-erfmg.
line_count = sy-loopc.
endmodule.                 " read_table OUTPUT
*&      Module write_table INPUT
module write_table input.
witab-matnr = mara-matnr.
witab-maktx = makt-maktx.
witab-charg = mch1-charg.
witab-menge = mseg-menge.
witab-erfmg = mseg-erfmg.
modify itab from witab index tc_itab-current_line.
endmodule.                 " write_table INPUT
*&      Module exit INPUT
module exit input.
leave to screen 0 .
endmodule.                 " exit INPUT
*&      Form create_goods_movement
form create_goods_movement .
clear : gv_header, i_return[], i_goodsmvt_items[].
gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
gv_header-pr_uname = sy-uname.
GM with reference to reservation
loop at itab into witab.
    i_goodsmvt_items-material   = witab-matnr.
    i_goodsmvt_items-entry_qnt = witab-erfmg.
    i_goodsmvt_items-entry_uom = 'ST'.
    i_goodsmvt_items-move_type = mseg-bwart.
    i_goodsmvt_items-plant      = mseg-werks.
    i_goodsmvt_items-stge_loc   = mseg-lgort.
    i_goodsmvt_items-move_plant = mseg-umwrk.
    i_goodsmvt_items-move_stloc = mseg-umlgo.
    i_goodsmvt_items-batch      = witab-charg.
    append i_goodsmvt_items.
endloop.
find BAPI processing transaction
if gv_code is initial.
    perform determine_bapi_code using mseg-bwart
                             changing gv_code.
endif.
call function 'BAPI_GOODSMVT_CREATE'
    exporting
      goodsmvt_header = gv_header
      goodsmvt_code    = gv_code
    importing
      goodsmvt_headret = gv_headret
      materialdocument = gv_matdoc
      matdocumentyear = gv_matyear
    tables
      goodsmvt_item    = i_goodsmvt_items
      return           = i_return[].
cancel blocking process
loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
    exit.
endloop.
if sy-subrc ne 0.
    refresh i_message_tab.
    call function 'BAPI_TRANSACTION_COMMIT'
      exporting
        wait = 'X'.
    wa_message_tab-msgid = 'M7'..
    wa_message_tab-msgty = 'S'.
    wa_message_tab-msgno = '060'.
    wa_message_tab-msgv1 = gv_matdoc.
    wa_message_tab-msgv2 = ''.
    wa_message_tab-msgv3 = ''.
    wa_message_tab-msgv4 = ''.
    append wa_message_tab to i_message_tab.
else.
    refresh i_message_tab.
    call function 'BAPI_TRANSACTION_ROLLBACK'.
write a message as there is an unexpected error.
    loop at i_return.
      wa_message_tab-msgid = i_return-id.
      wa_message_tab-msgty = i_return-type.
      wa_message_tab-msgno = i_return-number.
      wa_message_tab-msgv1 = i_return-message_v1.
      wa_message_tab-msgv2 = i_return-message_v2.
      wa_message_tab-msgv3 = i_return-message_v3.
      wa_message_tab-msgv4 = i_return-message_v4.
      append wa_message_tab to i_message_tab.
    endloop.
endif.
call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
    tables
      i_message_tab = i_message_tab.
endform.                    " create_goods_movement
*&      Form determine_bapi_code
form determine_bapi_code using p_bwart type bwart
changing p_code type bapi2017_gm_code.
data: lt_t158b type table of t158b with header line.
clear p_code.
select tcode from t158b into corresponding fields of table lt_t158b
where bwart eq p_bwart.
loop at lt_t158b.
    select single gmcode from t158g into p_code
    where tcode eq lt_t158b-tcode.
    if sy-subrc is initial.
      exit.
    endif.
endloop.
endform. " determine_bapi_code
*&      Form paging
form paging using code.
data: i type i,
        j type i.
case code.
    when 'P--'. tc_itab-top_line = 1.
    when 'P-'.
      tc_itab-top_line = tc_itab-top_line - line_count.
      if tc_itab-top_line le 0.
        tc_itab-top_line = 1.
      endif.
    when 'P+'.
      i = tc_itab-top_line + line_count.
      j = tc_itab-lines - line_count + 1.
      if j le 0.
        j = 1.
      endif.
      if i le j.
        tc_itab-top_line = i.
      else.
        tc_itab-top_line = j.
      endif.
    when 'P++'.
      tc_itab-top_line = tc_itab-lines - line_count + 1.
      if tc_itab-top_line le 0.
        tc_itab-top_line = 1.
      endif.
endcase.
endform.                    " paging
*&      Form write_alv
form write_alv .
perform find_list_header.
perform fill_field_cat.
perform fill_sortinfo.
g_repid = sy-repid.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra             = 'X'.
answer = 'Y'.
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_buffer_active        = ''
      i_callback_program     = g_repid
      i_save                 = 'A'
    i_callback_top_of_page = 'TOP_OF_PAGE'
      is_layout              = gs_layout
      it_fieldcat            = gt_fldcat[]
     it_sort                = gt_sortin[]
    tables
      t_outtab               = itab[].
endform.                    " write_alv
     Form find_list_header
form find_list_header.
data : v_datum(10),
         v_datlo(10),
         v_dathi(10),
         v_uzeit(8).
clear: gt_header, gt_header[].
gt_header-typ = 'H'.
gt_header-info = sy-title.
append gt_header.
clear gt_header.
gt_header-typ = 'S'.
gt_header-key = 'Çalıştırma Zamanı : '.
write syst-datum to v_datum.
write syst-uzeit to v_uzeit.
concatenate v_datum '/' v_uzeit into gt_header-info.
append gt_header.
endform.                    " find_list_header
     Form fill_field_cat
form fill_field_cat.
refresh gt_fldcat.
clear   gt_fldcat.
gt_fldcat-key = 'X'.
add-fieldcat 'MATNR' 'MARA' ''.
add-fieldcat 'MAKTX' 'MAKT' ''.
add-fieldcat 'CHARG' 'MSEG' ''.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'MEINS' 'MARA' 'Olcu Birimi '.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'ERFMG' 'MSEG' 'Adet'.
endform.                    " fill_field_cat
     Form fill_sortinfo
form fill_sortinfo.
gt_sortin-up            = 'X'.
gt_sortin-fieldname     = 'MATNR'. append gt_sortin.
endform.                    " fill_sortinfo
     Form top_of_page                                              *
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
      i_logo             = 'ZKUTAS'
      it_list_commentary = gt_header[].
endform.                    " top_of_page

HI,
if it is a normal report program then you can directly create a Selection screen field.
After the Type-pool you can use Parameters or Select-options to create the selection screen field..
If it is a Modulpool program then you can create a selection scren field like
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
PARAMETERS: p1(10) TYPE c.
SELECTION-SCREEN END OF SCREEN 1100.
defines a selection screens 1100 as subscreens.
The next screen number of screen 100 is 100 (statically-defined).
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN area INCLUDING sy-repid number.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
CALL SUBSCREEN area.
MODULE user_command_0100.
look at the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
Regards
Sudheer

Search help for input fields in a screen

Hi,
Pls help me
how to set search help property for the I/O fields in screen in se80?
1. do we want to add any property for search help in the property window?
2.do we want to create a MODULE PROCESS ON VALUE REQUEST ?
PLS tell me how to set search for the I/O field in se80?pls tell me the process?
i want to set the search help for more I/O fields in se80 but all the fields belongs to the same table?
can i create a single search for all these fields and use that for all the I/O fields ?
elementary search help or collective search help?
thanks & regards in advance,
vsnl.

Hi,
Input Help on the Screen
Within the Screen Painter, you can define two types of input help:
1. The FIELD statement with one of the additions VALUES or SELECT.
2. Linking a search help directly to a screen field.
If you link a search help directly to a screen field, it overrides the additions of the FIELD
statement. However, the input check [Page 581] functions of the FIELD statement remain
unaffected.
Input Help in Flow Logic
The following input help methods are obsolete and should not be used. They are still supported
for compatibility reasons.
In the screen flow logic, you can specify a value list for a screen field <f> as follows:
FIELD <f> VALUES (<val1>, <val2>,...).
The value list contains a series of single values <vali>. The NOT and BETWEEN additions for the
input check [Page 581] are not appropriate for input help.
You can also create a value list by accessing a database table as follows:
FIELD <f> SELECT *
FROM <dbtab>
WHERE <k1> = <f1> AND <k2> = <f2> AND...
In the WHERE condition, the fields of the primary key <ki> of the database table <dbtab> are
checked against the screen fields <fi>. The WHENEVER addition, used with input checks [Page
581], is not necessary for input help.
If you have used a ABAP Dictionary reference for field <f>, the selection and the hit list formatting
may be affected by any check table attached to the field.
Attaching a Search Help
Search helps from the ABAP Dictionary can be attached to a screen field [Ext.]. To do this, enter
the name of the search help in the corresponding field in the attributes of the screen field in the
Screen Painter. This assigns the first parameter of the search help to the screen field. It is only
possible to place a value from the hit list onto the screen.
Input help on a screen.
REPORT DEMO_DYNPRO_F4_HELP_DYNPRO MESSAGE-ID AT.
DATA: CARRIER(3) TYPE C,
CONNECTION(4) TYPE C.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
602 April 2001
Cancel
Airline
Flight number
Screen field with search help
Input help in the flow logic
The input fields have been adopted from the program fields CARRIER and
CONNECTION. The function code of the pushbutton is CANCEL, with function type
E. The search help DEMO_F4_DE with the search help parameter CARRID is
assigned to the screen field CARRIER. The search help uses the database table
SCARR.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
FIELD CARRIER VALUES ('AA', 'LH').
FIELD CONNECTION SELECT *
FROM SPFLI
WHERE CARRID = CARRIER
AND CONNID = CONNECTION.
When the user chooses the input help for the individual fields, the following input
help is displayed:
For the Airline field, the search help displays the names of the airlines and places the airline
code in the input field for the chosen line. If the airline code is not one of those listed in the
VALUES list of the screen flow logic, the input check triggers an error message in the PAI
event. So the search help overrides the VALUES addition for the input help, but not for the
input checks. This is therefore not an appropriate place to use the VALUE addition.
For the Flight number field, the flow logic displays the selected entries from the database
table SPFLI and places the selected line in the input field.
Regards,
Bhaskar

Acrobat 9.1.0 Standard ... Can a field type be changed?

Created a new pdf form from Excel. All fields were converted/created as Text fields. Some I want to change to List fields and some I want to change to Check Box fields. Can this be done within Acrobat Standard? I can only find the ability of creating new List fields or Check Boxes (not changing).

Unfortunately this is no quick and easy way to change form field "types" only the properties. You'll need to delete the text form fields and replace them with check boxes or list boxes as appropriate.

Problem with a Dynpro field (type numc)

hi everybody.
I'm developping a ModulPool application in wich i have 2 RadioButtons with 2 textbox fields.
What i pretend to do is, when the user clicks a radiobutton and strikes Intro, enable the corresponding textbox field and disable the other one.
My code runs fine, but i have a little problem. When I loop the screen table, to set the appropiate value to the 'input' property, in this case, when i try to disable it (input = '0'), I get a zero character in that field. This field has NUMC type, i'm sure this is the problem
'cos i've got no problem with the other field (type char). But i can't solve it.
Anybody's got an idea?
Thanks

What you are seeing is the normal behavior of a numeric field represented by the SAPgui. This is how all numeric fields are displayed via SAPgui. If you don't want to see the 0, then you just change the field type to CHAR and handle accordingly.
Regards,
Rich Heilman

Need to add a new field in Milestone screen

Hi Gurus
I have a request to add a new field in milestone screen. Milestone under WBS element and Milestone under network.
Is there any Exit for the same ? can you tell me the different ways we can add a field in the screen
- Pithan

Hi,
i did create a new milestone usage. There i have the option to put "billing Plan Type", "Date Category" and "Start/Finish". I did not see an option where i can add a custom field. I also checked the node for "Billing Plan Types" and there also i saw only the standard screens / fields. Did i miss something here?
Thanks
Sreekanth

Convert field type on screen..

Similar Messages

Maybe you are looking for