Convert from 2013 to 2012 files

any idea how to convert from 2013 to 2012 ??
thanks alot
Solved!
Go to Solution.

In LV2013 do File...Save For Previous Version.
I don't know if this is available for all LV version (I have Pro). You can also post your vi to the version conversion board
http://forums.ni.com/t5/Version-Conversion/bd-p/VersionConversion
Ben64

Similar Messages

Convert from 2013 to 2012

From 2013
To 2012
Turns out my school has a lesser version than I do. I need to work on this at school.
Solved!
Go to Solution.
Attachments:
Expression 1.vi ‏32 KB

Here you go.
For future reference, these conversion requests belong in the Version Conversion board. I have asked the moderator to move this thread to that board.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Attachments:
Expression 1.zip ‏18 KB

Plz convert from 2013 to 2012

2013 to 2102
Attachments:
Car Washing System.vi ‏8 KB

Hi,
Here it is in LV 2012
Kees
Attachments:
Car Washing System Folder.zip ‏6 KB

How long does it normally take to convert from PDF to Excel files?

How long does it normally take to convert from a PDF to Excel files?

Sara-
I did see your response. Thanks. The other thing that happened was after I enabled Adobe on my Dell it apparently knocked out my Mozilla. Now I can't get internet connection unless I use Internet Explorer which I would prefer not to. I'm going to visit our IT folks tomorrow and see if I can get some of this resolved.
The PDF files I obtained that I am trying to transfer to Excel may be too complex because there is a great deal of extraneous text information in the basic document that lies outside of the tables I want to transfer. I'm going to try and highlight the tables only and see if this works.
Thanks for taking the time answering.
Best,
Henry

Converting from Quicktime/Midi audio files to MP3 format

Before I upgraded to Tiger, I could use itunes to convert into mp3 form all the Quicktime Midi files that my chorus director emailed to me. Then I burned them on to cds so that everybody in the chorus could play their part in their car on the way to work and learn it really well.
Well, now when I go through the exact same steps that are on the website (go to preferences, go to advanced, change encoder to mp3, etc etc) and itunes says that it cannot convert the file to mp3 because of "unknown error (-50)."
Any ideas on how to get around this other than trashing my Tiger and going back to Panther?

Before I upgraded to Tiger, I could use itunes to
convert into mp3 form all the Quicktime Midi files
that my chorus director emailed to me. Then I burned
them on to cds so that everybody in the chorus could
play their part in their car on the way to work and
learn it really well.
Well, now when I go through the exact same steps that
are on the website (go to preferences, go to
advanced, change encoder to mp3, etc etc) and itunes
says that it cannot convert the file to mp3 because
of "unknown error (-50)."
Any ideas on how to get around this other than
trashing my Tiger and going back to Panther?
I bought and downloaded quicktime Pro and used it to convert my MIDI files. First you have to find your MIDI file on your HD. Then drag it into QuickTime. Then "export" the file and in the export window select aiff as the format. Save it to your HD. Then drag the aiff file into iTunes and it will play in iTunes (6.0.4 is the version I'm using) It will also burn to a CD from within iTunes. If you only want to play the file from within iTunes, you can skip the QuickTime conversion, and simply drag and drop the MIDI file from your HD into iTunes - iTunes will play it but won't allow the file to be burnt to a CD.

How to stop Nitro file converter from altering all Adobe files

I recently wanted to convert a word document to PDF and downloaded a free version of the program Nitro but as the only free part of the downloaded program was to look at it as it then wanted me to purchase the full program before I could use it so I deleted from my computer. But before it finished uninstalling itself it altered all the Adobe files and documents I had on my computer also it now alters the file type of any Adobe file or document sent to me as an email attachment. How can I stop it? would taking the manufacturer to court sort them out? If anyone has any ideas of how to prevent or alter what has happened send to email address [email protected]

Hi Sara
To a point what you said to resolve the problem worked but what the Nitro programme did was convert all my Adobe documents and files into a pdf that can only be opened by a Word programme. If I click on the icon which used to be an Adobe file which has now become a form of greyed out Word icon it automatically opens M/S Word but cannot read it as it’s a pdf file.
Do you know of any way I can convert them back to an adobe readable file?
Many thanks
David Hughes

Converting from pdf to ps file using java

hi i want to convert pdf file into ps file (pdf are in multiple languages ( languages belongs to india))using java.
any one can help me urgent.

Does this need to be done through a Java app? Ghostscript can do this. As long as it's running on a linux system, I suppose you could use Runtime.exec("gs command");
Not sure exactly what the command is, I just know it can do it.

Problem when converting from spool to XLS file

Hey.
I need to get table data from the spool and send it by mail in an xls file.
so this is what i have done:
I have used the FM 'RSPO_RETURN_ABAP_SPOOLJOB' to get the data table from the spool.
then i am sending the data table in an xls file via the FM 'SO_DOCUMENT_SEND_API1'.
the problem is that the xls file that i am getting through the mail is defected.
All the contents of the spool is located in the first row, first column.
How can i fix it?
Thanks, Barak.

After geting the data in a internal table.from spool......refer this report.....
data: p_email   type somlreci1-receiver
                               value 'MAIL ID'.
data: begin of it001 occurs 0,
      bukrs type t001-bukrs,
      butxt type t001-butxt,
      end of it001.
data:   imessage type standard table of solisti1 with header line,
        iattach type standard table of solisti1 with header line,
        ipacking_list like sopcklsti1 occurs 0 with header line,
        ireceivers like somlreci1 occurs 0 with header line,
        iattachment like solisti1 occurs 0 with header line.
start-of-selection.
select bukrs butxt into table it001 from t001.
Populate table with detaisl to be entered into .xls file
perform build_xls_data .
Populate message body text
clear imessage.   refresh imessage.
imessage = 'Please find attached excel file'.
append imessage.
Send file by email as .xls speadsheet
perform send_email_with_xls tables imessage
                                      iattach
                                using p_email
                                      'Example Excel Attachment'
                                      'XLS'
                                      'TestFileName'
                                      'CompanyCodes'.
     Form BUILD_XLS_DATA
form build_xls_data .
constants: con_cret type x value '0D', "OK for non Unicode
            con_tab type x value '09'.   "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
constants:
    con_tab type c value cl_abap_char_utilities=>horizontal_tab,
    con_cret type c value cl_abap_char_utilities=>cr_lf.
concatenate 'BUKRS' 'BUTXT'
         into iattach separated by con_tab.
concatenate con_cret iattach into iattach.
append iattach.
loop at it001 .
    concatenate it001-bukrs it001-butxt
           into iattach separated by con_tab.
    concatenate con_cret iattach into iattach.
    append iattach.
endloop .
endform.
     Form SEND_EMAIL_WITH_XLS
form send_email_with_xls tables pit_message
                                          pit_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription.
data: xdocdata like sodocchgi1,
        xcnt type i.
Fill the document data.
xdocdata-doc_size = 1.
Populate the subject/generic message attributes
xdocdata-obj_langu = sy-langu .
xdocdata-obj_name = 'SAPRPT' .
xdocdata-obj_descr = p_mtitle .
Fill the document data and get size of attachment
clear xdocdata.
read table iattach index xcnt.
xdocdata-doc_size =
     ( xcnt - 1 ) * 255 + strlen( iattach ).
xdocdata-obj_langu = sy-langu.
xdocdata-obj_name   = 'SAPRPT'.
xdocdata-obj_descr = p_mtitle.
clear iattachment. refresh iattachment.
iattachment[] = pit_attach[].
Describe the body of the message
clear ipacking_list. refresh ipacking_list.
ipacking_list-transf_bin = space.
ipacking_list-head_start = 1.
ipacking_list-head_num = 0.
ipacking_list-body_start = 1.
describe table imessage lines ipacking_list-body_num.
ipacking_list-doc_type = 'RAW'.
append ipacking_list.
Create attachment notification
ipacking_list-transf_bin = 'X'.
ipacking_list-head_start = 1.
ipacking_list-head_num   = 1.
ipacking_list-body_start = 1.
describe table iattachment lines ipacking_list-body_num.
ipacking_list-doc_type   = p_format.
ipacking_list-obj_descr = p_attdescription.
ipacking_list-obj_name   = p_filename.
ipacking_list-doc_size   = ipacking_list-body_num * 255.
append ipacking_list.
Add the recipients email address
clear ireceivers. refresh ireceivers.
ireceivers-receiver = p_email.
ireceivers-rec_type = 'U'.
ireceivers-com_type = 'INT'.
ireceivers-notif_del = 'X'.
ireceivers-notif_ndel = 'X'.
append ireceivers.
call function 'SO_DOCUMENT_SEND_API1'
       exporting
            document_data              = xdocdata
            put_in_outbox              = 'X'
            commit_work                = 'X'
       tables
            packing_list               = ipacking_list
            contents_bin               = iattachment
            contents_txt               = imessage
            receivers                  = ireceivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
endform.
Reward IF.........
Regards
Anbu

Converting from printlayout to pdf file

i converted the printlayout to pdf but in that pdf it didnt shows the images (but logo was existing in the layout)
i need the solution as soon as possible
regards
kavitha s

Dear Kavitha,
There could be the following causes for this.
1. The Picture Folder path may be incorrect or was deleted. You can
check if the path is valid by performing the following steps:
     a) In the Print Template choose the "Field Index" window.
     b) Double click on the row that contains the company logo (e.g. 154
        Picture- company logo name). This will open an "Object
        Properties" window.
     c) Click on "Browse" to check if the path is valid. Continue with
the steps below if it is, if not go to step 2.
     d) Choose "Administration"
     e) Choose "System Initialization"
     f) Choose "General Settings"
     g) Select "Path" tab. There should be a path to a bitmap folder
within the "Picture Folder". If there is not then create   a path to
the relevant bitmap folder.
2. The image(company logo) was set to invisible under "Object
     Properties". To remedy this situation perform the following steps:
     a) In the Print Template choose the "Field Index" window.
     b) Double click on the row that contains the company logo (e.g. 154
Picture company logo name). This will open an "Object
Properties" windowand select the "General" tab.
     c) If the "Visible" checkbox is not ticked activate it by ticking
it.
     d) Click on "OK" and the image (company logo) should become
visible.
Regards,
Gagan Thareja
SAP Business One Forums Team

Why will CS4 not open DNG files converted from Olympus E-M1 raw files?

For several years I have been able to use the DNG Converter to convert .ORF raw files from my Olympus E-M1 and then open them for processing in CS4. Suddenly CS4 quit recognizing these DNG files saying "Photoshop could not complete your request because Photoshop does not recognize this type of file"
I have not changed any preferences. I'm using E-M1 v3.0, DNG Converter v8.3.0.141 on a Mac. I have deleted DNG converter several times, even reinstalled an earlier version but nothing changes.
However, CS4 will open DNG files converted from Pentax raw .PEF files from my K-5. Weird. It's the Olympus raw DNG conversions that won't open.
I can view the DNG converted files in question in Mac's Preview just fine but not CS4. Any ideas will be appreciated.

Be sure the DNG Converter's compatibility is set to provide support for your version of ACR:
Benjamin

Convert from swf

Does anyone know of any free programs to convert from .swf to another file type like mpg, avi, wmv, etc.

Google search results in 5,690,000 hits when "convert flash to iPod" is used as search term.
Here ya go sparky: http://www.google.com/search?hl=en&lr=&q=convertflash+toipod&btnG=Search

Late 2013 Macbook Pro Retina 15' will not boot an external disk from a Mid-2012 MAcbook Pro. What should I do?

In order to simplify moving all my files from the previous mid-2012 macbook pro 15' when moving to my new late-2013 macbook pro, i superdup-ed the full hard-disk to an external ssd. Unfortunatelly the new mac resuses to boot from this external disk (i get the grey disk with a line over it). The external disk works just fine so if I boot the new mac from its internal SSD I can read/write the external disk without problems.
Old OS X is 10.9 as is the OS on the new mac.
What I need to do is to boot the new mac from the external ssd, use the same superduper to copy the external content onto the internal ssd.
How can I solve this issue?

Welcome to Apple Support Communities
If you made a backup of your files with SuperDuper, use Migration Assistant (in /Applications/Utilities) to transfer your files from the external drive > http://pondini.org/OSX/MigrateLion.html It will create a new user account with the transferred files, so you may want to merge both user accounts > https://discussions.apple.com/docs/DOC-5472
The Late 2013 MacBook Pro uses a special OS X Mavericks version which makes OS X compatible with it, and older OS X versions do not work with it. That's the reason why you cannot start up from the external drive created from the Mid 2012 MacBook Pro

From LabVIEW 2013 to 2012

Convert from LV 2013 to LV2012
Solved!
Go to Solution.
Attachments:
Generate_Voice_Event.vi ‏35 KB
Main Voice.vi ‏35 KB
Text Callback.vi ‏43 KB

Hi,
Here it is in LV 2012
Kees
Attachments:
Voice Init Folder.zip ‏131 KB

Why can I open a saved htm page from 2008 to 2012 but not 2013?

I have saved an htm and or html page for 4 days a week since 2008 to 2012. those pages have had no issues opening as the saved page. but ever since approximately 2013 those saved pages will not open as saved. I have asked at the site that the page is coming from if it had changed anything, they said no. my system is the same as it has been for many years(10), windows XP service pack 3. as for other saved files there are no issues, I would be happy to send as an attachment a page from 2008 and any of the saved pages from 2013.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information such as bookmarks and history.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences, you may also want to backup those htm/html just in case if something goes wrong.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Slow applications start from win 2012 file server using win 7 workstations

I hope someone can help me with why applications are slow to load i have replaced a 8 year old server running win 2003 and replaced it with dell t620 running win 2012 r2 it is like 20 times faster but it is slower than the old server. the office has
7 win 7 x64 machines all our applications are running from win 2012 file server. The server is set up as following the server runs with two hyper-v machines one machine runs ad, file server, dhcp, dns and printer server and the other is domino server and remote
desktop.
the machine is more than capable but it is not so i started reading after i run out of ideas. i looked every where but the issue is with the server after trying everything else i did a simple test If i go to the application folder and click on it apps load
instantly if i then type a unc path it takes from instant load to 3 and a bit seconds the same as the workstations. The same speed if I use ip address.
network cards are intel
i would really appreciate if somebody has suggestions that i could try
thank you

Hi,
Do you mean that applications in the application folder start slowly when you access the application folder on the Windows 2012 R2 file server from Windows 7 workstations using UNC path or IP address. Do all the files in the application folder have the same
issue? Please create a shared folder on the file server, then access the shared folder from Windows 7 workstations to check if the issue still exists.
You could disable SMBv3 on server 2012 to check if the issue related to SMB protocol.
How to enable and disable SMBv1, SMBv2, and SMBv3 in Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8, and Windows Server 2012
http://support.microsoft.com/kb/2696547/en-us
Warning: We do not recommend that you disable SMBv2 or SMBv3. Disable SMBv2 or SMBv3 only as a temporary troubleshooting measure. Do not leave SMBv2 or SMBv3 disabled.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Convert from 2013 to 2012 files

Similar Messages

Maybe you are looking for