Convert from a 15 pin to work on a G4 MDD Dual Processor

I just purchased a Powermac G4 MDD Dual Processor. I have an Acer AL1916WAB monitor. The monitor is a 15 pin. What do I need to purchase to connect it to the G4? I haven't a clue.
All help is appreciated.

I found my answer with a little research and I'm set! So I don't need help after all lol!

Similar Messages

Converting from 2D to 3D not working for me

I am trying to follow the tutorial "Converting from 2D to 3D" and it is 'not working for me.' When I open the image 'archer...' I do not get layers, but only the background image, and consequently no 3DAxis widget appears.
This is my first try at this, and I am stuck trying to figure out what is wrong.
I am running Adobe Photoshop CS4 Extended, version 11.01 on Vista, with 4GB of RAM, 500GB HD
Processor speed 2200MHz
NVIDIA GeForce 7100
Memory available to PS 3255MB
Memory used by PS 70 percent
If anybody could please point me in the right direction, I would greatly appreciate it!
christian

it can work with the Background layer just fine, go to 3d->New Shape from Layer->Cone (or whatever) and then select one of the 3D tools and it should appear. Note though that OpenGL drawing must be enabled in Edit->Preferences->Performance to be able to see it.
Using the 3D Axis: http://help.adobe.com/en_US/Photoshop/11.0/WS0FB519CE-94B2-44d0-AFBE-7227747D20B9.html

Will a DVR from a G5 Mac Pro work in a G4 MDD?

Specifically, will a Sony Optiarc AD-7170A DVD±RW work in a G4 1.25MHz dual Mirror door? The drive is a pull from Mac Pro G5. The optical bay in the MDD is ATA-33. The burst specs on the drive suggests ATA-66. The optical bay cable will reach the ATA-66 plugin on the logic board. Is this kosher?
As a "This Old Mac" guy, I welcome your suggestions. I hate to discard neat old things that work well.
best regards

Hello Krumer,
Houston, we have a problem!
G5s & Mac Pros are 2 completely different animals though they look quite similar on the outside, G5's are PPC, have one Optical slot & use IDE Optical drives like G4s do, Mac Pros are IntelMacs & have two optic slots, & might use IDE Opticals or SATA Opticals!
So, with the Sony Optiarc AD-7170A being IDE, I suspect no problems, depends which APPs you want to use it with.

Converting from Ipod 30 pin connector to Blackberry Bold 9700 mini for car

I just bought a 2009 Audi A4. It has the ipod hook up that has a plug for the 30 pin Ipod intergration. My wife uses her iphone in the car, but I need a solution for using my blackberry and being able to hook it into this system. Does any one know of a converter cable that goes from the ipod cable to a usb mini for my Blackberry 9700 bold?

No. Video output is not supported through either Lightning to 30-pin adapter (with or without cable).

Converting from aiff to mpg not working

I followed the instructions provided here: http://support.apple.com/kb/ht1550
to convert an aiff file to an mp3 file, but after I do the converstion the file is still an aiff. I do a 'get info' and it says it is an aiff file, and also I try dragging it to my desktop and it an aiff file.
I originally created the file in garageband and imported it into itunes. The file is 20 minutes long.
Strangely I can convert a short song of 3 minutes successfully from aiff to mg3.
Any ideas of what could be happening here and how to fix it?

iTunes converts but makes a new file and also leaves the original.

Converting from MP3 to AAC not working

When I try to convert any of my songs in iTunes I get an error message saying: "An unknown error occurred (0x77686174)." This only happens when trying to convert to AAC. I have tried to convert to AIFF, and Apple Loseless Encoder and it works. I have also tried the default 128kbps and many others. Can anyone help?

When I try to convert any of my songs in iTunes I get an error message saying: "An unknown error occurred (0x77686174)."
hi killbrad!
hmmm. i've seen posts on this topic. see:
http://ipodgarage.com/phpBB2/viewtopic.php?t=494&sid=79e818827474b53cfdab3c8b619 aa0e2
i've also seen toonz say (my fault for any misreading of her post) that it's a QT error message saying something like "codec not found". so if the workarounds aren't helpful for you, we could try a careful standalone QT reinstall. see:
http://discussions.apple.com/message.jspa?messageID=1157322#1157322
keep us posted.
love, b

Hypertext links are not always preserved from Word to PDF, using Aperçu or Adobe, depending on OS 10 or Lion. Why? This generally works perfectly in Windows. Why are Apple and Adobe unable to correctly handle links when converting from Word to PDF?

Hypertext links are not always preserved from Word to PDF, using Aperçu or Adobe, depending on OS 10 or Lion. Why? This generally works perfectly in Windows. Why are Apple and Adobe unable to correctly handle links when converting from Word to PDF?
Depending on the system version, and Office Word version:
- a pure URL link starting with http or even www sometimes works in PDF, either produced by Aperçu or Adobe, sometimes does not work;
- other kind of links where the text under display is not a URL, never work!
I like everything with Apple computers and software, except PDF generation. Output files are usually bigger in size, and no better quality, than under Windows. Furthermore, it is weird that something as common as hyperlinks does not work correctly!
I related this question with Mac OS X Snow Leopard, but the problem is still there with Mac OS Lion.
This problem seems to have been around for years, without any proper solution from Apple and/or Adobe! To me, this is very embarrassing!

Greetings NoNameGiven,
If I understand the problem correctly (I’m not sure I do) you would prefer ‘iii’ to be read as “eye eye eye” rather than “three”? The alt text property is the only way that I know of to make this happen. Hope this helps.
a ‘C’ student

Are there any headphones that work from the 30 pin connector?

Are there any headphones that work from the 30 pin connector? Neither of my kids auxilary ports on their iPhone/iPods work. Need another way to use with headphones.

http://www.sonicelectronix.com/item_14260_1PR2-Universal-iPod-Adapter-to-RCA-Aud io-Connection-Cable-w-Charging-Capabilities.html

I keep losing my Selection arrow functionalities on documents I've converted from CS2 to CS6. I reinstall preferences and it works for a few minutes but all is lost again. What to do?

I keep losing my Selection arrow functionalities on documents I've converted from CS2 to CS6. I reinstall preferences and it works for a few minutes but all is lost again. What to do?

What OS?
Id you still have CS2 installed someplace, export the original files as .inx (InDesign Interchange) and convert that instead of the .indd.

Converting from indexed color to grayscale no longer works in CS4

I have a number of files to convert from indexed colors to grayscale. Did some but clicked "don't show me again" box on the Discard Colors warning. Now I can't make the conversion. Everything looks fine, but when I close file, then reopen, it's reverted to indexed colors - restarting Photoshop or the computer doesn't help.
I'd appreciate any help....Thanks, Grant

Grant,
All your contact information is posted to the web. These forums are crawled by bots harvesting info.
I don't think you want additional junk mail, unsolicited phone call scams, and possible attempts to crack your website, do you?
People here recommend not to post contact info. Perhaps a forum moderator can remove your personal info, but you might be able to edit your post yourself.
GIF only uses indexed color mode, So if you want your files to NOT be in the Indexed Color mode you need to save them as another file format like .png or .jpg

The bullet list, numbered list and the normal text is not converting when I am converting from RH 9 to MS Word 2010

Hi all,
Greetings for the day
I am created a new CSS in Robohelp 9. I have also created a new template in Word 2010. The style sets for different information elements like (Heading, bullets, body text, ) are more or less same between the CSS and the new templates. I am also able to map the .css styles to Word template when I am converting from RH to Word as I am getting the necessary option in the drop-down list.
However, when the output is generated, the bullet, the numbered list and the body text is not converting at all. The body text works sometimes. However, the numbered list and bullet list is coming out as images.
If anybody knows the solution, I can share the .css and Word template.
Thanks in advance.
Regards,
Parag Deb

Create a new project with two or three topics containing lists of both types. Generate a printed output that shows the problem. Then zip it up and send it to me. See the Contact page on my site for instructions.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How do I convert from pdf to word? I see an option to do so, however, when I click on it, Ia box opens...

when I try to convert from pdf to word, a box opens and suggests I am to click on (select) the file I want to convert. It sounds all well but it does not work. I really really just want my files back in word, all of them, no matter, because after having to reinstall windows 7 (done by techs) and me having to re-download all my HP drivers, and tools, and other software, which I imagine included adobe reader, now I see some pdf files won't open. It says, "access denied" and boy that really makes me wantt o scream. I am the ONLY user, it is my notebook, I am the administrator so I can't figure out why some files open and some don't. I can't ascertain any difference.
I would be grateful for any help. This has become just too exhausting. After reinstalling sooooooooo much, then to have to go through this with what is a free application? I say I think not.
This should NEVER happen with any free application and boy there is NO help to be found. They blow you off the phone fast telling you it's a free application. Then why are you putting in this kind of stuff that it won't open? This is NOT a shared notebook, it's mine. I am the only user, personal use.
HP probook, if anyone needs that info.
Please, will someone help?
I would be so grateful.
thanks,
Gina

Gee, Pat, this is a real big help.
Nobody could possibly think anyone would ask for help without first trying to fix the issue oneself. Or maybe you do. I have opened the file and looked under security. I have changed it to owner-notebook (which is what the techs called me) and clicked accept but geepers it didn't work.
Maybe someone else has an idea.
Take Ownership of a File or Folder
The above should be a link. At least I copied and pasted the link. I did what was stated in there. It isn't like brain surgery. But it is not working. I ended up being able to open some pdf files after transferring them from one partition category to another. I wish it was that easy as you seem to think.
Thanks for the help. Have a great year.

Applescript to convert from AW6 spreadsheets to Excel

I have an iMac (iMac12,2) running OS 10.9.1 with applications of Pages’09 (4.3), Pages (5.0.1), Numbers’09 (2.3) and Numbers (3.0.1) available.
One of my laptops is a MBA (MacBookAir1,1) that I have kept at 10.6.8 with applications Appleworks (6.2.2) and Appleworks (6.6.9) available.
Recently, I converted many CWWP documents from AW6 into Pages. This was done on the iMac with an Applescript that copied a file (AnyDocumentCWWP) to the desktop as a file named AWV6, opened AWV6 with Pages’09, saved the result as AWV6.Pages, applied the creation date and modify dates of the original to AWV6.Pages, moved the new AWV6.Pages to the original directory and moved the original file to the trash, renamed AWV6.Pages to the original filename (excluding extension). The Pages version of the original document does not preserve the formatting of the CWWP, but the content was now discoverable with Spotlight. Since I was primarily concerned with the content, I would consider the conversion effort successful enough.
I performed the same sort of process on the iMac with CWSS documents converting from AW6 into Numbers. Here the results were less successful. I discovered that many of the converted spreadsheets had cells where the cell contained the last calculated value in substitute for the formula originally present -or- Numbers was unable to open the CWSS spreadsheet due to size limitations. Neither problem occurs when the file is converted on the MBA by Appleworks into an Excel format. For those CWSS files that did not properly convert to Numbers, I would like to perform a conversion to Excel.
When a given spreadsheet is manually opened on the MBA with either version of Appleworks, one can “Save as” using several formats of Excel. That operation will preserve the formula which cannot be recognized in Numbers’09. An example of this issue is when a spreadsheet has a cell that contains a formula with the function “ISNUMBER”. When I manually open a CWSS in Appleworks (either 6.2 version), I can Save As Excel Win 97 … or Excel Mac 98 … creating an XLS file that preserves the formula.
I have attempted two techniques with Applescript to be able to convert my CWSS documents into XLS format. Neither seem to work.
The first technique is very similar to a few lines extracted from a canned script found on http://macscripter.net/viewtopic.php?id=8296 the relevant code is:
set theSprTranslator to "Excel Win 97, 2000, XP 2002 spr"
tell application "System Events" to set mfpath to get path of disk item ("~/desktop/" as string)
set newfile to (mfpath & "AWV6" as string)
set NewFilename to AWV6XLS
tell application "AppleWorks 6"
    activate
    open newFile -- alias reference is ok
    save using translator theSprTranslator with NewFilename and replace
    close front document without saving
end tell
When this did not work, I attempted a scripted GUI solution as a second option. The GUI code I had found at http://stackoverflow.com/questions/17348326/applescript-to-save-an-appleworks-do cument-wont-compile-end-tell-vs-end-easy is:
tell application "System Events"
         tell process "AppleWorks"
                 click menu item "Save As…" of menu "File" of menu bar 1
                 click menu button "File Format" of window "Save : AppleWorks 6"
                 click menu item "Excel Mac 5 spreadsheet" of menu 1 of menu button "File Format" of window "Save : AppleWorks 6"
                 keystroke return
         end tell
end tell
Unfortunately there is no “File Format” menu button, after a bit of further research, I discovered UI Browser and wrote my own Applescript equivalent:
set mytempwork1 to AWV6
set theSprTranslator to “Excel Win 97, 2000, XP 2002 spr”
tell application "Finder" to open file (mytempwork1 as string) of the desktop
tell application "System Events"
    tell process "AppleWorks"
        click menu item "Save As…" of menu "File" of menu bar 1
        tell text field 1 of window "Save : AppleWorks 6"
            set value to "XX" & mytempwork1
        end tell
        click pop up button 1 of group 1 of window "Save : AppleWorks 6"
        click menu item theSprTranslator
        —click radio button 2 of group 1 of window "Save : AppleWorks 6"
        —delay 3
        —click radio button 1 of group 1 of window "Save : AppleWorks 6"
    end tell
end tell
tell application "System Events"
    tell process "AppleWorks"
        delay 10 — <<<<<IF YOU CLICK ON THE BUTTON WHILE IN THIS DELAY, THE SCRIPT WILL BEHAVE PROPERLY
        click button "Save" of window "Save : AppleWorks 6"
        delay 1
    end tell
end tell
This GUI script behaves almost as I would like. It seems to ignore the setting of the “pop up button 1” unless I actually intervene while the script is running and I click on the button. When I do so, the script runs as intended.
Is there a way to force Appleworks to recognize the Applescripted value of the “clicked” menu item?

Hello
As far as I know, there's no need to resort to GUI scripting. The problem in exporting in AppleScript is that AppleWorks 6 only accepts typeChar (TEXT) data as translator name while AppleScript string has become always being represented as typeUnicodeText (utxt) since OS X 10.5. This makes passing translator name to save command difficult but there's a workaround method as shown in the sample code below. The |TEXT|() handler does the job. Tested with AppleWorks 6.2.4 under 10.6.8.
main()
on main()
    set export_translator to "Excel Mac 98, 2001 spreadsheet"
        "Excel Mac 5 spreadsheet"
        "Excel Mac 98, 2001 spreadsheet"
        "Excel Win 5 spreadsheet"
        "Excel Win 97, 2000, XP 2002 spr"
    set export_translator_TEXT to my |TEXT|(export_translator)
    set src to (path to desktop)'s POSIX path & "in.cwk"
    set dst to (path to desktop)'s POSIX path & "out.xls"
    set srca to src as POSIX file as alias
    set dsta to touch(dst) as POSIX file as alias
    tell application "AppleWorks 6"
        --return export translators
        open srca
        tell document 1
            if document kind = spreadsheet document then
                save in dsta using translator export_translator_TEXT
            end if
            close saving no
        end tell
    end tell
end main
on touch(f)
    do shell script "touch " & f's quoted form
    return f
end touch
on |TEXT|(u)
        string u : source text
        return data : «data TEXT...» representing u converted to MACROMAN encoding
    do shell script "u=" & u's quoted form & "; printf '%s' \"$u\" | iconv -f UTF-8 -t MACROMAN | xxd -p"
    run (run script "
script
    «data TEXT" & result & "»
end script")
end |TEXT|
Hope this helps,
H

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

IPod Classic 160GB film library sync problem - trying to sync films that have converted from purchased DVD to mp4 format locally, not purchases from the online store - all other libraries sync perfect - why?

Hello Apple and the iTunes Windows PC users community.
I am trying to sync films that I have converted from purchased DVD to mp4 format locally, not purchases from the online store. The mp4s all appear and play successfully in my iTunes application but will not sync across to the iPod film library folder.
For your information: I am using iTunes 11.1.3.8 on a Windows 7 64bit machine with 500GB hard disk and 8GB of Ram in the UK.
I have restored the iPod classic 160GB three times now to see if it was a hardware problem with no joy. Each time all the music restores properly as do the podcasts and all the items in TV programmes all appear to sync and work fine.
I have also tried to copy films into the TV Programmes to get around it with no joy. They always go to the films section to start with. It is just the Films library that does not sync - all others work perfectly. As a last resort I have uninstalled and re-installed iTunes with no joy either.
I am technically savvy and have gone through the itunes and ipod settings but nothing appears to make a difference - This is the first time I have had to post here as I can usually solve the majority of the ipod anomilies but this one has me flummoxed.
Has the film encoding type changed in the newest itunes update? - Has this happened to anybody else and is it a hardware, software, or operating system problem.

Having uninstalled the current version 11.1.3.8 and loaded and older version of iTunes 10.7.0.21 I can now categorically confirm that the newest update seems to be causing the problem as the films and TV Programmes are syncing perfectly on this older version.
If you are going to do this please dont forget to remove the ' iTunes Library.itl' file as this stops the older versions from running as I've just found out

Convert from a 15 pin to work on a G4 MDD Dual Processor

Similar Messages

Maybe you are looking for