Convert from LabVIEW 5 to LabVIEW 2014

hi,
I could not open VI. Could you convert this vi to LabVIEW 2014
Attachments:
mslumsrs.vi ‏432 KB
mslumsrs.vi ‏432 KB

That's okay.  You can't.
The message about the duplicate post is some forum housekeeping to save people's time responding to this message in the event the other message is already answered.  It just directs everyone to the first thread in case they stumble across this one first.

Similar Messages

  • Convert from LabVIEW 2011 to LabVIEW 9.0

    Please convert from LabVIEW 2011 to LabVIEW 9.0
    Attachments:
    Watlow Vis.zip ‏76 KB

    Looks like somebody forgot to attach the zip file.  Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Watflow.zip ‏57 KB

  • Converting from LabView 4.0 to 8.5

    I have a Pico Technology TC-08 thermocouple datalogger (RS232). It has drivers for Labview 4.0 but I use Labview 8.5, which says it can't convert the drivers. From the help pages I have understood that there is separate software that can convert from Labview 4.0 to 8.5. Can anyone tell me where I can download or otherwise obtain this software?

    Hi EKY,
    converted to LV7.1 - should be ok now
    But: there's a "missing dll"-error. You have to check this in LV8.5.
    There is also no guarantee the dll will work with LV8.5 or maybe new operating system (from Win95 to WinXP or Vista?)
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome
    Attachments:
    TC081_LV71.LLB ‏29 KB

  • Down convert from LabView 9.0 to 8.6

    I would greatly appreciate it if someone could convert the attached file from LabView 9.0 to 8.6.
    Thank you.
    Solved!
    Go to Solution.
    Attachments:
    Read_Value_From_Excel_LM6.vi ‏26 KB

    Once again, saved in 8.0
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Read_Value_From_Excel_LM6_nijams.vi ‏36 KB

  • Converting from LabView 4.0 to 9.0

    I also need to convert this llb from LabVIEW 4.0; to 9.0. Anyone willing to do this for me? see attached and thanks...
    Attachments:
    gj18i.llb ‏247 KB

    Hey!! Could somebody help me?? I have an labview 2009 and it would be nice if somebody could convert these files (version 4.0.1)  for me! Thx
    Attachments:
    lgy1m.llb ‏73 KB

  • Convert from Labview 5.1 to labview8.6

    Hello Everyone,
    Can any one please convert this vi from labview 5.1 to labview 8.6 or labview 2009
    Thanks in advance
    Nadim
    [email protected]
    Attachments:
    4-Channel Power Spectrum with estimate.vi ‏750 KB

    Hi,
    Here it is in LV 8 but there are some VI's missing (DAQ)
    Kees
    Attachments:
    4-Channel Power Spectrum with estimate.vi ‏402 KB

  • Conversion from LabVIEW 2014 to LabVIEW 2012

    Couls someone convert me this file from LB 2014 to the 2012 version, please?
    Solved!
    Go to Solution.
    Attachments:
    Ejercicio Optativo.vi ‏38 KB

    Saved for 2012.
    Adam
    CLD & CTD
    Attachments:
    Ejercicio Optativo.vi ‏27 KB

  • Please Convert from LabView 2013 to 2011

    Hello, Could someone please convert these VIs from LV13 to 11 please?
    Thanks, 
    Laura
    Solved!
    Go to Solution.
    Attachments:
    Syringe Pumps New.zip ‏953 KB

    Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Syringe Pumps New.zip ‏364 KB

  • I need a vi converted from LabVIEW 9.0 to 8.6 or 7.1

    I have a few vis that need to be saved to an earlier version. These are in version 9.0 and I need them in 8.6 to open them. It would be better if I could get them in 7.1.
    Solved!
    Go to Solution.
    Attachments:
    Grab_continuously_new.vi ‏380 KB
    Mikrotron.llb ‏337 KB

    I converted them into 8.6, I was missing a few dependancies (mvfgi5.dll) so I just ignored them.
    Attachments:
    Grab_Continuously_New_86.zip ‏390 KB

  • Convert from LabView 6.1 to LabView 6.0

    Can anyone kindly save this VI's in 6.0 version. I do not have LV 6.1 and these VI's are written in LV 6.1 version.
    Thanks,
    Kishor
    [email protected]
    Attachments:
    High_Speed_Data_Logger.llb ‏154 KB

    It appears to be one of the example programs provided and as far as I know, it's there in 6.0 (it's a lot older than that I believe). From the help menu, select Find Examples and then go to Hardware Input and Output>DAQ>Solutions. High Speed Data Reader and High Speed Data Logger should both be there.

  • Need to convert to labview 11 from labview 12

    hello
    I need to convert the following Labview 12 VIs to Labview 11.
    thank you in advance
    Attachments:
    QAM Demodulation.vi ‏30 KB
    QAM Modulation.vi ‏30 KB
    rx QAM.vi ‏57 KB

    The conversion was done here: http://forums.ni.com/t5/Version-Conversion/need-to-convert-from-Labview-12-VI-to-Labview-11/m-p/3021...
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Please Convert tktds5xx from LabView 2012 to LabView 2011.

    I was directed here to have an instrument driver converted from LabView 2012 to LabView 2011.
    Thanks in advance!
    Solved!
    Go to Solution.
    Attachments:
    tktds5xx.zip ‏777 KB

    Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Attachments:
    tktds5xx.zip ‏529 KB

  • Conversion LabVIEW 2014 to LV 2013

    Hello. please help me by converting this program from LabVIEW 2014 to LabVIEW 2013 version. This file is very important for me and you will help me a lot. Thx.
    Solved!
    Go to Solution.
    Attachments:
    alarm_2.vi ‏17 KB

    Here you go.  There is a missing subVI though.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    alarm_2.zip ‏10 KB

  • LabVIEW 2014 toLabVIEW 2013

    Hi,
    Can someone please help me and convert these files from LabVIEW 2014 to LabVIEW2013 ?
    Thank you very much !
    Solved!
    Go to Solution.
    Attachments:
    Aufgabe3.vi ‏8 KB
    MatheSubVI.vi ‏11 KB

    Here are all of your VI saved in 2013.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    2013.zip ‏17 KB

  • Making labview 2014 and Access 2013 db working correctly

    Hi all,
    i'm trying to gain access to a database created by Access 2013 from Labview 2014. Since we dont want to buy the NI toolkit i thought to use the old LabSQL library. Has anyone tried to do the same thing or give me some hints about it?
    Actually i have tryed to run the example shipped with LabSQL but i received an error:
    Exception occured in Microsoft OLE DB Provider for ODBC Drivers: [Microsoft][Driver Manager ODBC] Nome origine dati non trovato e driver predefinito non specificato. in ADO Connection Open.vi->Example - Fetch a Table.vi
    Reading the README file of the LabSQL i found this:
    2. As with any database application on Windows, you'll need to create a DSN (Data Source Name) in the ODBC control panel. This DSN is used in your LabVIEW application to connect to the appropriate database. If you want to set up the example database, do the following:
        a.Go to your Windows Control Panels, and open "ODBC Data Sources"
        b.Click on the "System DSN" tab
        c.Click on the "Add..." button.
        d. From the list of drivers, choose "Microsoft Access Driver"
        e.At the dialog box, type in "myDB" for the Data Source Name. Then click on "Select..." button, and find the file "Sample Database.mdb" included with the LabSQL examples. Leave everything else as it is, and hit OK.
        f. Close the ODBC control panel
        g. Test the connection by running one of the examples provided.
    My problem is that i can't find the driver named "Microsoft Access Driver" so i can't continue through the points of the instructions. I only found "SQL Server" and "SQL Server Native Client 11.0" but if i select one of this the dialog box that appear later is different from the one described in the README instructions...

    You can certainly access the database without the toolkit. There are drivers that I posted on the forum and I have a small complete application on my blog -- you can even download the code from my SVN repository.
    In terms of you specific problem, you don't need a DSN. What you need is something called a "connection string". Also, don't waste your time with ODBC. The built-in ADO drivers are easier to use. Again, check my posts for details -- I did a 3-part series on database connectivity.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Maybe you are looking for