Convert from swf

Does anyone know of any free programs to convert from .swf to another file type like mpg, avi, wmv, etc.

Google search results in 5,690,000 hits when "convert flash to iPod" is used as search term.
Here ya go sparky: http://www.google.com/search?hl=en&lr=&q=convertflash+toipod&btnG=Search

Similar Messages

Converting from swf to avi or mpg?

I've been searching for a way to convert the swf file that is
generated in Adobe Captivate to an avi or mpg.. but every
tool/converter i have tried fails to do the job for one reason or
another..
Is there a converter project out there that works?
Thanks

You could publish as an exe and convert that to AVI.
Go to this web site for a tool that also converts SWF
http://converter-exe-flash-avi.qarchive.org/
or Google SWF to AVI for a list of sites with that software.
I only did the search, I do not have any experience using any of
these.

Convert AS2 swf to AS3 swf

I have a swf (written in AS3) that loads other swfs into it.
There are no issues when loading other AS3 swfs but there is a
problem loading AS2 swfs. I get the following error:
TypeError: Error #1034: Type Coercion failed: cannot convert
flash.display::AVM1Movie@35d3a51 to flash.display.MovieClip.
Is there any way to convert the AS2 swf into a AS3 swf so it
will be compatible with my loader? I cannot go back and change the
AS2 swfs because I do not have the fla files. Or is there any way
to incorporate AS3 code that will load AS2 swfs properly? It seems
hard to believe that Adobe would neglect this backwards
compatibility issue. Thanks

Hello Andrei1,
Thanks for looking at my simple AS3 code. The AS2 swfs that
I've been working (and having difficulties) with are components
that I've purchased from places like www.flashden.com. Some are
image transitions (such as "Dynamic Image Draw found at
http://www.flashden.net/item/dynamic-image-draw/7532)
while another is used to create a looped banner rotator animation
(IMG_loop, a free d/l from www.afcomponents.net). I have another
that uses an .xml file to configure a slideshow animation.
You mention "needing to do more" if AS2 scripts inside its
swf are to be run by the parent AS3 fla; what would these lines of
code be?
In researching my problem further I've since realized that
most of these issues deal both with the version of AS used, as well
as the version of the Flash player the fla is set up to animate
for. In particular, the "Dynamic Image Draw" component requires
that Flash Player 8 or 9 be used with AS2.
Given that many of my purchased components are like this,
I've since changed my main fla movie from AS3 back to AS2 and have
learned that the scripting needed to call individual multiple swfs
into it at various points in the timeline is MUCH simpler!!!!! One
single, easily interpreted, line of code vs. 5 lines using
variables and much more arcane (to me) function calls.
I started my file with AS3 figuring that I'd be better off
learning the new version of the language; much stress and
forehead-rubbing later, I've seen just how much easier and
understandable AS2 is to learn.
I recognize that there are likely very strong arguments for
the more structured coding approach used by AS3, but for someone
like me who wants to generate customized Flash presentations with
little fuss, I'm not qualified to make them.
Perhaps this is a no brainer for those many flash gurus out
there, but for me this tiny bit of wisdom has been hard fought for!
That being said, is there an easy way to convert a swf file
created using AS2 to something that AS3 can work/interact with?
I've come across a free d/l product called actionscript bridge, but
haven't been able to understand how to get it to work.

HTMLLoader from SWF

I am loading a swf into an AIR app created in CS3.
In the AIR app I use HTMLLoader.createRootWindow() which
works fine.. but I would like to call this function from the SWF
that was loaded into the AIR app.
I cannot call it directly from the swf so I am trying to
reference the Function that uses HTMLLoader.createRootWindow().
Something like:
var html:HTMLLoader = HTMLLoader.createRootWindow();
var urlReq:URLRequest = new URLRequest("
http://www.someplace.com");
html.load(urlReq);
MovieClip(html).call_function = call_ function ;
addChild(html);
That was an attempt to pass the Function into the loaded swf
the same way I pass a variable.
MovieClip(loader.content).var1 = var1; -- That works.
Any Ideas for passing a function? I already declare the
function in the loaded swf.. now just need it to become the one
passed in from AIR.
Is there a way to bring the HTMLLoader capabilities into a
swf without making it an AIR app?

Yes, there is a software that will convert SWF back to the
original fla. Do a Google search for "from SWF to .fla"
John

Converting to swf

Premiere doesn't export to .swf so I've been trying to find online converters that will allow me to do so. However, with each one comes a new glitch in the .swf - is there a simple way to export from Premiere or convert to .swf?

Well, a swf file is a Flash file, but you're trying to create a flash video, which is an flv file which would then go inside of a swf file.
For example, the videos you see on YouTube and other similar sites are flash, but the player is the swf file while the videos themselves are flv files.
If you have Adobe Flash, it comes with a built-in converter to make your video files flash video files and it also comes with video players built-in. Then from flash, you export your project as a swf file which includes the player and can either include the video as well or it points to the location of the video.

Converting a swf to quicktime mov file

I created a swf file useing Flash and need to convert this to a mov file. I watched a training video and under Publish Settings > Format their should be a Quicktime mov option. I do not have this option on my CS5 Flash version. Also, if I try to export as a mov file, nothing happens. I have QuickTime Player version 7 on my computer. It just will not show up as an option in Flash. How do I convert a swf file to a mov file without going online and purchasing a converter?

I tried using the movie export option. A popup comes up titled "Recording Flash Content." It freezes and does not ever finish creating the file. I tried downgrading the player from Flash Player 10 to Flash Player 5. This did not work either.

How can make byteArray from swf

Hi all,
i need to make byteArray from swf and save it into DB, because i need load the swf(in byteArray) to adobe air with URLLoader and loadBytes(). But I do not know how can i convert swf to byteArray, is it possible with php, or i need as3 script, which make byteArray...
thanks for help!

I don't know if you better post this in the Adobe AIR forum?

How do I convert a .swf to .flv

Hi,
I'm currently developing content for a flash e-learning
environment that requires .flv extension. I'm using Captivate 3 for
the task of creating the content, but have not found a way to
export or convert the .swf output of Captivate to make it .flv
I'm totally at a loss - can anyone help?

I'm not sure this will help, but what I know is that the FLV
format is designed for streaming or progressive download of video
from the server to the user's browser by converting it to the flv
format via an import procedure into a Flash doc. Normally I use
Flash to import a movie into a Flash file layer, add a sound layer
for, say, a background music loop, on another layer and publish it
as a swf and flv, using the Component Inspector to set the rewind
to "true" or "false".
This process creates two required files: the final swf and an
flv which calls the swf when the page opens or other event occurs
on the web page. The user experience is absent the jerky appearance
that often occurs from swf alone or movies alone.
The video component that is imported into my Flash doc as
described in my first paragraph above, can either be a .mov from
anywhere or one I create in Flash and export as an .mov
I don't know about formats other than .mov I think it depends
on your final deployment, i.e. web, dvd, whatever.
I have not used captivate, but if it will create a .mov for
you, should do it. You may have, however, other controls to build
in as well. Flash 8 and above allows you to do that in the process
of creating the .flv
Then, you must load the .flv and swf onto the server at the
same level. Or, you must make other code changes so the flv "finds"
the swf. A different path can be entered using the Component
Inspector in Flash.
Hope that helps.

How to edit a Animated Gif file and convert to SWF

I am using the creative cloud with fireworks. I chose the free trial with buying in mind if I saw it work properly. I simply want to upload an animated GIF file and then download it as a SWF file. I saw someone on youtube do this and it's not that if I get on the correct page I would not know how to do that but I just cannot find how to get the GIF into the software to edit. It has just simply put them in the creative cloud folder which can open them on IE> How do i make it available to edit and convert to SWF please? Thanks in advance.

You will likely get better program help in a program forum
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

ABAP code needed to convert from 0calmonth2 & 0calyear to 0calmonth

Hi SAP GURUS,
Can anybody give me the ABAP code to convert from 0calmonth2 and 0calyear to 0calmonth.and please suggest me whether i have to write start routine or end routine in transformations.
Thanks ALL.

hi,
in the transformation map 0calmonth2 and 0calyear to the 0calmonth field, and from drop down choose routine.
there will be an area where it will be mentioned write your piece of code below this line.
paste the below code:
Concatenate source_fields-0calmonth2 source_fields-0calyear into result.
also delete the line result = .
save the routine and execute the package.
regards,
Arvind.

The bullet list, numbered list and the normal text is not converting when I am converting from RH 9 to MS Word 2010

Hi all,
Greetings for the day
I am created a new CSS in Robohelp 9. I have also created a new template in Word 2010. The style sets for different information elements like (Heading, bullets, body text, ) are more or less same between the CSS and the new templates. I am also able to map the .css styles to Word template when I am converting from RH to Word as I am getting the necessary option in the drop-down list.
However, when the output is generated, the bullet, the numbered list and the body text is not converting at all. The body text works sometimes. However, the numbered list and bullet list is coming out as images.
If anybody knows the solution, I can share the .css and Word template.
Thanks in advance.
Regards,
Parag Deb

Create a new project with two or three topics containing lists of both types. Generate a printed output that shows the problem. Then zip it up and send it to me. See the Contact page on my site for instructions.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How do I convert from pdf to word? I see an option to do so, however, when I click on it, Ia box opens...

when I try to convert from pdf to word, a box opens and suggests I am to click on (select) the file I want to convert. It sounds all well but it does not work. I really really just want my files back in word, all of them, no matter, because after having to reinstall windows 7 (done by techs) and me having to re-download all my HP drivers, and tools, and other software, which I imagine included adobe reader, now I see some pdf files won't open. It says, "access denied" and boy that really makes me wantt o scream. I am the ONLY user, it is my notebook, I am the administrator so I can't figure out why some files open and some don't. I can't ascertain any difference.
I would be grateful for any help. This has become just too exhausting. After reinstalling sooooooooo much, then to have to go through this with what is a free application? I say I think not.
This should NEVER happen with any free application and boy there is NO help to be found. They blow you off the phone fast telling you it's a free application. Then why are you putting in this kind of stuff that it won't open? This is NOT a shared notebook, it's mine. I am the only user, personal use.
HP probook, if anyone needs that info.
Please, will someone help?
I would be so grateful.
thanks,
Gina

Gee, Pat, this is a real big help.
Nobody could possibly think anyone would ask for help without first trying to fix the issue oneself. Or maybe you do. I have opened the file and looked under security. I have changed it to owner-notebook (which is what the techs called me) and clicked accept but geepers it didn't work.
Maybe someone else has an idea.
Take Ownership of a File or Folder
The above should be a link. At least I copied and pasted the link. I did what was stated in there. It isn't like brain surgery. But it is not working. I ended up being able to open some pdf files after transferring them from one partition category to another. I wish it was that easy as you seem to think.
Thanks for the help. Have a great year.

How do you stop DNG Converter from embedding Adobe's ACR default settings instead of custom settings?

I notice that the new version of Adobe DNG Converter (8.6, and maybe earlier) appears to place Adobe's ACR defaults in the converted file. Thus, the converted files open up in Bridge with an indication that they already have settings made, and, hence, ACR does not apply the custom camera settings. One has to Clear Settings first in Bridge, then open in ACR.
This behavior is new, perhaps to 8.6. But it's presence defeats the purpose of having custom Camera Defaults.
Is there any way to prevent DNG Converter from installing settings?

ssprengel wrote:
What do you mean by “custom camera settings”? Do you mean you’ve changed the Camera Raw defaults for a particular camera and those aren’t being seen until you do a Reset? Or do you mean some sort of Nikon-settings that Adobe never looks at?
Also at what point in the workflow are you converting these files, just after copying them to your hard-disk and before touching them with any other Adobe software, or after they’ve been adjusted in Nikon software, or after they’ve been adjusted in Bridge/ACR, initially as NEFs?
I mean my custom camera defaults that are set by the Save New Camera Defaults for a given camera.
My workflow is to take my original raw files first into Adobe DNG Converter. I then open the folder in Bridge. At this point I notice that my original raw files remain unaltered (there is no "settings" icon in the top right corner – circle with two lines and up-arrows – in the image's thumbnail), but the converted dng's (otherwise untouched and unopened in ACR) have a "settings" icon. When I open the original raw file in ACR, it opens using my custom camera defaults. When I open the otherwise virgin dng in ACR, it opens using the Adobe defaults (the same defaults that would be employed if no custom camera default had been set).
This behavior is new. DNGs formed by earlier versions of the DNG Converter did not apply any settings to the converted file, and when they opened in Bridge, they were given the custom camera settings.
In order to retain the old (and proper) behavior, I now have to take the just-converted documents into Bridge, select them, and immediately apply Develop Settings/Clear Settings. That gets rid of the settings that have been installed by the DNG Converter (as well as the "settings" icon on the thumbnail).
I notice there is a new feature in Adobe DNG Converter 8.6, namely, a panel-specific toggle between the settings and the default settings. This indicates to me the likelihood that Adobe has been making some alterations with the settings that is having unintended consequences. It clearly is not proper for DNG Converter to be adding (installing) settings, because that prevents the custom camera default settings from being applied, and hence defeats the purpose of the custom camera default settings.

Applescript to convert from AW6 spreadsheets to Excel

I have an iMac (iMac12,2) running OS 10.9.1 with applications of Pages’09 (4.3), Pages (5.0.1), Numbers’09 (2.3) and Numbers (3.0.1) available.
One of my laptops is a MBA (MacBookAir1,1) that I have kept at 10.6.8 with applications Appleworks (6.2.2) and Appleworks (6.6.9) available.
Recently, I converted many CWWP documents from AW6 into Pages. This was done on the iMac with an Applescript that copied a file (AnyDocumentCWWP) to the desktop as a file named AWV6, opened AWV6 with Pages’09, saved the result as AWV6.Pages, applied the creation date and modify dates of the original to AWV6.Pages, moved the new AWV6.Pages to the original directory and moved the original file to the trash, renamed AWV6.Pages to the original filename (excluding extension). The Pages version of the original document does not preserve the formatting of the CWWP, but the content was now discoverable with Spotlight. Since I was primarily concerned with the content, I would consider the conversion effort successful enough.
I performed the same sort of process on the iMac with CWSS documents converting from AW6 into Numbers. Here the results were less successful. I discovered that many of the converted spreadsheets had cells where the cell contained the last calculated value in substitute for the formula originally present -or- Numbers was unable to open the CWSS spreadsheet due to size limitations. Neither problem occurs when the file is converted on the MBA by Appleworks into an Excel format. For those CWSS files that did not properly convert to Numbers, I would like to perform a conversion to Excel.
When a given spreadsheet is manually opened on the MBA with either version of Appleworks, one can “Save as” using several formats of Excel. That operation will preserve the formula which cannot be recognized in Numbers’09. An example of this issue is when a spreadsheet has a cell that contains a formula with the function “ISNUMBER”. When I manually open a CWSS in Appleworks (either 6.2 version), I can Save As Excel Win 97 … or Excel Mac 98 … creating an XLS file that preserves the formula.
I have attempted two techniques with Applescript to be able to convert my CWSS documents into XLS format. Neither seem to work.
The first technique is very similar to a few lines extracted from a canned script found on http://macscripter.net/viewtopic.php?id=8296 the relevant code is:
set theSprTranslator to "Excel Win 97, 2000, XP 2002 spr"
tell application "System Events" to set mfpath to get path of disk item ("~/desktop/" as string)
set newfile to (mfpath & "AWV6" as string)
set NewFilename to AWV6XLS
tell application "AppleWorks 6"
    activate
    open newFile -- alias reference is ok
    save using translator theSprTranslator with NewFilename and replace
    close front document without saving
end tell
When this did not work, I attempted a scripted GUI solution as a second option. The GUI code I had found at http://stackoverflow.com/questions/17348326/applescript-to-save-an-appleworks-do cument-wont-compile-end-tell-vs-end-easy is:
tell application "System Events"
         tell process "AppleWorks"
                 click menu item "Save As…" of menu "File" of menu bar 1
                 click menu button "File Format" of window "Save : AppleWorks 6"
                 click menu item "Excel Mac 5 spreadsheet" of menu 1 of menu button "File Format" of window "Save : AppleWorks 6"
                 keystroke return
         end tell
end tell
Unfortunately there is no “File Format” menu button, after a bit of further research, I discovered UI Browser and wrote my own Applescript equivalent:
set mytempwork1 to AWV6
set theSprTranslator to “Excel Win 97, 2000, XP 2002 spr”
tell application "Finder" to open file (mytempwork1 as string) of the desktop
tell application "System Events"
    tell process "AppleWorks"
        click menu item "Save As…" of menu "File" of menu bar 1
        tell text field 1 of window "Save : AppleWorks 6"
            set value to "XX" & mytempwork1
        end tell
        click pop up button 1 of group 1 of window "Save : AppleWorks 6"
        click menu item theSprTranslator
        —click radio button 2 of group 1 of window "Save : AppleWorks 6"
        —delay 3
        —click radio button 1 of group 1 of window "Save : AppleWorks 6"
    end tell
end tell
tell application "System Events"
    tell process "AppleWorks"
        delay 10 — <<<<<IF YOU CLICK ON THE BUTTON WHILE IN THIS DELAY, THE SCRIPT WILL BEHAVE PROPERLY
        click button "Save" of window "Save : AppleWorks 6"
        delay 1
    end tell
end tell
This GUI script behaves almost as I would like. It seems to ignore the setting of the “pop up button 1” unless I actually intervene while the script is running and I click on the button. When I do so, the script runs as intended.
Is there a way to force Appleworks to recognize the Applescripted value of the “clicked” menu item?

Hello
As far as I know, there's no need to resort to GUI scripting. The problem in exporting in AppleScript is that AppleWorks 6 only accepts typeChar (TEXT) data as translator name while AppleScript string has become always being represented as typeUnicodeText (utxt) since OS X 10.5. This makes passing translator name to save command difficult but there's a workaround method as shown in the sample code below. The |TEXT|() handler does the job. Tested with AppleWorks 6.2.4 under 10.6.8.
main()
on main()
    set export_translator to "Excel Mac 98, 2001 spreadsheet"
        "Excel Mac 5 spreadsheet"
        "Excel Mac 98, 2001 spreadsheet"
        "Excel Win 5 spreadsheet"
        "Excel Win 97, 2000, XP 2002 spr"
    set export_translator_TEXT to my |TEXT|(export_translator)
    set src to (path to desktop)'s POSIX path & "in.cwk"
    set dst to (path to desktop)'s POSIX path & "out.xls"
    set srca to src as POSIX file as alias
    set dsta to touch(dst) as POSIX file as alias
    tell application "AppleWorks 6"
        --return export translators
        open srca
        tell document 1
            if document kind = spreadsheet document then
                save in dsta using translator export_translator_TEXT
            end if
            close saving no
        end tell
    end tell
end main
on touch(f)
    do shell script "touch " & f's quoted form
    return f
end touch
on |TEXT|(u)
        string u : source text
        return data : «data TEXT...» representing u converted to MACROMAN encoding
    do shell script "u=" & u's quoted form & "; printf '%s' \"$u\" | iconv -f UTF-8 -t MACROMAN | xxd -p"
    run (run script "
script
    «data TEXT" & result & "»
end script")
end |TEXT|
Hope this helps,
H

How do I convert from PAL to NTSC in compressor?

I have a project I converted from mp4 file to Apple Pro Res to edit it in FCP. I exported using Compressor and tried to import the files to DVD Studio Pro. It said it can't put PAL files into an NTSC project. I didn't even realize it was filmed in PAL (yes, I have the rights to use the footage). How do I convert the files from PAL to put it into FCP...in Compressor? If so, how? Thanks for any help!

To convert the 25fps PAL file to a 29.97fps file staying within the ProRes codec:
• Open up compressor. In the Settings window select: Apple>Formats>Quicktime>ProRes 422
• Select the "Duplicate Selected Setting" icon in the upper left of the Settings window
• This creates duplicate of the preset that you can edit
• Select the preset copy and, in Inspector, give it a new name (something like ProRes PAL>NTSC)
• In Encoder>Video Settings>Frame rate - and change the frame rate to 29.97
• In Frame Controls> turn them on and set Resize Filter and Rate Conversion to BETTER. (If so set them to BEST, be prepared for a long wait)
• In the Geometry tab, set the Frame Size to 720x480 (you don't say if the file is 16:9 or 4:3)
• Submit the file and go have dinner. Depending on the length of the file, it may take hours.
Have fun.
x

Convert from swf

Similar Messages

Maybe you are looking for