Convert Joomla layout into Dreamweaver
Hallo all,
I'm new to web development and my current site is made with Joomla. Because I want my site to be better found by search engine's, I have read some articles abouw SEO. And one of the thinks that I found is that the amount of code and the amount of text should be in balance. Now my website bouwcoördinatie has a bad balance of code and content. One of the reasons is that this is due to the use of Joomla, which put a lot of code in it. So because I'm also interrested in creating websites, I looked at program's that could help me creating easily a website, but I don't need a re-design of my site.
My question now is, is it possible to convert a layout that is made in Joomla directly into Dreamweaver? That should save me a lot of time!
Thanks in advance!
First of all, there is nothing in Joomla that should "rate you down" in terms of web search. You have a small website with very little content and the more content you have, the better you will be.
If you are doing home renovation, I recommend that you show before and after pictures, galleries of your work and make sure that every photograph has an "alt" tag that describes it. Dedicate a certain number of hours monthly to taking photos and putting them up on your website, expand it with each new project you build and be patient. Within time your website will rise in the rankings, due to the authority it represents as well as the content.
Here is an example. This landscaper came to me and complained because he was not #1-ranked in the search engines in his area. The main issue was that his former partner's website was higher-ranked and he had taken a dislike to his former partner.
My client did what I told him to do. Add to his website. As he's a landscaper, he does this annually, in the winter when he is not working. Every photo is labeled, every photo has an alt tag and is fully-described. I used Project 7's Image Gallery Magic to do his presentations—to good advantage. It took about two years, but if you are looking for a landscaping contractor in Connecticut, his site comes up on top consistently.
Mind you, I did his site in Dreamweaver. There is no content management system. But server-side code is completely invisible to search engines, and they ignore JavaScript. There is not a lot of written content on his website, but each photo is tagged appropriately and visible to the blind (and remember, search engines are like blind people).
Changing to a site managed in Dreamweaver alone will not change your ranking. Content is King. Add more to yur website and you'll be doing the right thing.
If you insist on dumping Joomla, the way to start is to copy the CSS (style sheet) from your Joomla site and rebuild from there. But you'll need to understand CSS and HTML.
By the way, I do like your graphic artist. Very nice images.
Similar Messages
-
Sliced and imported photoshop layout into dreamweaver
First, I am a newbie to all of this web design stuff and
coding and dreamweaver. I wanted to create my first website so here
I am. I went through 2 different tutorials (youtube and on
lynda.com) I created a layout in photoshop and I also sliced it. I
imported it into dreamweaver (CS3 by the way).....I somewhat
understand what I am doing. I did all the defining a site and I
clicked on the content box that I sliced and deleted it and
inserted a div / added the image that go there, then I made that
area editable. The layout I imported I saved it as a
template.Anyway, so basically I am clicking on each sliced area,
deleting it, and inserting a div there. No problem. Now, the sliced
areas that has about, home, contact, etc.....those I needed to make
as links/clickable images. So, before performing the delete then
inserting a div part.....I first clicked on the sliced area then at
the bottom of the screen, where it says link, I did a point to
file, basically linked it. Now, when I preview it in the browser,
it displays boxes around the sliced navigation menu, which it is
nit suppose to. see here is a screen shot...
http://i36.tinypic.com/2eowewm.jpg
What did I do wrong? Why is it showing up in a table when I
didn't create it in a table? How can I remove that purple looking
table border?
Also, when I go to each of the sliced navigation menu, then
delete it and insert a div..... the image there...it will not let
me turn it into a link.
How do I turn my sliced navigation menu images into links. I
know I am doing something wrong but just don't know what it is. Is
there a code I can use or am I suppose to modify or insert
something? and how do I remove the box from around it?
What is an easy way? Is there a tutorial out there?
I want my layout to look like what I mocked up in photoshop.
Is there a way I can create the same layout in dreamweaver? The
problem isn't the background, it's trying to get the pink area in
the center of the lalayout. I didn't know how to do that so thats
why I tried the way of creating it in photoshop.
Please help> youtube and on lynda.com
Regardless of what these tutorials lead you to believe, it is
the WRONG
approach. Read this to get some perspective -
Taking a Fireworks comp to a CSS-based layout in Dreamweaver
http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt1.html
http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt2.html
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"missdrika" <[email protected]> wrote in
message
news:[email protected]...
> First, I am a newbie to all of this web design stuff and
coding and
> dreamweaver. I wanted to create my first website so here
I am. I went
> through 2
> different tutorials (youtube and on lynda.com) I created
a layout in
> photoshop
> and I also sliced it. I imported it into dreamweaver
(CS3 by the
> way).....I
> somewhat understand what I am doing. I did all the
defining a site and I
> clicked on the content box that I sliced and deleted it
and inserted a div
> /
> added the image that go there, then I made that area
editable. The layout
> I
> imported I saved it as a template.Anyway, so basically I
am clicking on
> each
> sliced area, deleting it, and inserting a div there. No
problem. Now, the
> sliced areas that has about, home, contact,
etc.....those I needed to make
> as
> links/clickable images. So, before performing the delete
then inserting a
> div
> part.....I first clicked on the sliced area then at the
bottom of the
> screen,
> where it says link, I did a point to file, basically
linked it. Now, when
> I
> preview it in the browser, it displays boxes around the
sliced navigation
> menu,
> which it is nit suppose to. see here is a screen shot...
>
>
http://i36.tinypic.com/2eowewm.jpg
>
> What did I do wrong? Why is it showing up in a table
when I didn't create
> it
> in a table? How can I remove that purple looking table
border?
>
> Also, when I go to each of the sliced navigation menu,
then delete it and
> insert a div..... the image there...it will not let me
turn it into a
> link.
>
> How do I turn my sliced navigation menu images into
links. I know I am
> doing
> something wrong but just don't know what it is. Is there
a code I can use
> or am
> I suppose to modify or insert something? and how do I
remove the box from
> around it?
>
> What is an easy way? Is there a tutorial out there?
>
> I want my layout to look like what I mocked up in
photoshop. Is there a
> way I
> can create the same layout in dreamweaver? The problem
isn't the
> background,
> it's trying to get the pink area in the center of the
lalayout. I didn't
> know
> how to do that so thats why I tried the way of creating
it in photoshop.
>
> Please help
> -
Converting the layout from OTF format into PDF
Hi Experts,
I am new to SMART FORMS,I don't have a clue about how to convert the layout from OTF format into PDF format and how to store it in Presentation server.
Please send me a Model program or step by step approach of the same.
Useful inputs will be rewarded higher points.
Thanks in Advance,
DharaniHi,
The steps are given below:-
1) First get the name of your generated function module for the smartforms.
2) Then call the generated function module.
3) Then use the FM:CONVERT_OTF' to convert into PDF as shown below:-
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
IMPORTING
bin_filesize = w_pdf_len
bin_file = w_pdf_xstring
TABLES
OTF = OUTPUT_DATA-OTFDATA
LINES = LT_LINES
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
others = 5.
Hope this is clear.
Pravat.
<i>*Reward points if helpful.</i> -
How Do I Import A Photoshop CS4 Template into Dreamweaver CS4
Ok. Here's the deal, my friend and I spent alot of time working in Photoshop to come up with a nice template. He's even done all the coding to animate the buttons for standard, hover over, and click and all that. It's really cool, the buttons slide back and "lock" into place dependent upon which page you're on. However, I want to take all of that information and plug it into my website without loosing the button functionality. Unfortunately, every time I try to put the photoshop web template into Dreamweaver, it always converts it into an image. So, how do I add my complete photoshop web template and all it's functionality into Dreamweaver?
I'm afraid Photoshop is a graphics program ill suited for generating good HTML and CSS code. Use Photoshop to create your images only. Use DW to build your HTML, CSS and menus.
Have a look at this tutorial:
Taking a Fireworks (or Photoshop) comp to a CSS based layout in DW
Part 1 --
http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt1.html
Part 2 --
http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt2.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com -
How to setup a default direction for new divs in fluid grid layout in dreamweaver?
Hi,
how to setup a default direction for new divs in fluid grid layout in dreamweaver? I am an RTL interface user, I need my new divs to be inserted from right to left not Left to Right! could it be in dreamweaver?
Thanks.This may get me into strife, but my experience is that you are better off finding another platform for your RWD.
The framework that I tend to use is by Zub-Foundation http://foundation.zurb.com/.
A commercial product that I have come to appreciate can be found here http://www.projectseven.com/products/tools/composer/index.htm. Please do not mention me if you happen to choose this product. -
Convert pdf files into wiki pages, and export wiki pages as word and pdf files
I am working on an enterprise wiki site collection inside my SharePoint server 2013. And there was a requirement to automatically generate wiki pages from word documents. As I read that the built-in service within SharePoint does not support importing the
pictures within the word documents. So I looked into 3rd party tools and I settle on the “Kaboodle Word to Wiki” link
which will manage to convert word docs into wiki pages, with only minor layout problems.
But I want to know if there are additional tools which support the following:-
Converting pdf files to SharePoint wiki pages.
Exporting SharePoint wiki pages into pdf and word documents?
RegardsI haven't seen any third party tool converting pdf files to SharePoint wiki pages and and exporting SharePoint wiki pages into pdf and word files.
You need to write custom feature where you can use iTextSharp pdf for pdf conversion. you can also check below blog which shows the export of SharePoint Wiki to Word/PDF without 3rd party tools:
http://blogs.msdn.com/b/thomsven/archive/2011/09/09/export-sharepoint-wiki-to-word-pdf-without-3rd-party-tools.aspx
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.
the link you posted is a manual process for converting wiki to pdf ,, i was looking for a tool which allow converting wiki to pdf ? -
How to put Photoshop templates into Dreamweaver
After purchasing templates and downloading, I discovered the
page layouts for the templates were Photoshop files. I made the
changes I wanted to make in Photoshop and now need to put in
Dreamweaver. There is a Flash file that is giving me error messages
when I open the index page. When I try to insert an image (the
page) it comes in a new window. I'm definitely not doing this
correctly.
Can anyone tell me how to insert them into
Dreamweaver?Actually, I had forgotten about SiteGrinder. Its code is not
bad, to tell
you the truth. They have taken alot of trouble to make things
more stable
than a slap-dash, layer-based layout, but it is, to be sure
still strongly
rooted in absolute positioning. It might be an expedient way
to go, but
there is no substitute for some good HTML/CSS knowledge.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"jon@cmiwebstudio" <[email protected]> wrote
in message
news:gjohrn$ch9$[email protected]..
> There is software by media lab called sitegrinder that's
designed to
> export css
> based html websites from your photoshop designs, and I'd
say that's about
> as
> close to what you're talking about as I'm aware of.
>
>
http://www.medialab.com/sitegrinder/
>
> HOWEVER, this is along the same lines as using fireworks
to design html
> websites. The code is bloated and sensitive to fall
apart while
> adjusting, and
> in any professionals opinion, really only intended to
show clients a
> demonstration of what their website will look like.
>
>
>
> -
How to get PSD layout in Dreamweaver fixed to all resolutions and browsers
I designed a web layout in Photoshop. I sliced it and than used save for web option. I opened photoshop template in Dreamweaver but I can't figure out how to have it automatically adjust to different resolutions or monitors. When my resolution is set anywhere below 1152x864 the PSD template is too big when viewed in browser. I'm getting so frustrated. I've googled for hours and hours with no solution that worked.
To be blunt, what you want to do can't be done. There is no option, selection or setting that will turn a PS generated table based/sliced layout into a responsive design that changes with the browser.
Photoshop is great for making images, however the html it creates is horrible for anything other than a web page mock-up, basically something to show a client "this is how it will work, roughly". You should not use PS to create the html for your actual live website.
To create a responsive design requires an understanding of CSS in general and Media Queries specifically. Dreamweaver CS6 has some tools that can help, however they still require some knowledge of cascading stylesheets to make them work correctly across all browsers.
Here is a good reference website for CSS : http://www.w3schools.com
Here are some links discussing some of the tools you would use in Dreamweaver...
http://www.adobe.com/devnet/dreamweaver/articles/introducing-media-queries.html
http://tv.adobe.com/watch/digital-design-cs6/creating-adaptive-designs-using-fluid-grid-la youts-in-dreamweaver-cs6/ -
Converting a PDF into an Indesign doc.
Hello everybody,
Is it possible to convert a PDF into an Indesign File? I am using Indesign CS5.5
Thanks in advance for the help!
QntaDesignNo you can´t.
There´s couple of thing you can try, but I´m afraif none of them are quite perfect...
1) Open you PDF into Illustrator and copy/paste or drag&drop the content of the page into InDesign from there. Cons are; you can do only one page at the time and your text will be converted to outlines during the process
2) Save your PDF as RTF or Word document from Acrobat Professional and place resulting file to InDesign with File>Place commans. You probably have to redo most of the layout, but with correct settings you may be able to preserve text as editable mode and have some styles and graphic elements still after placing....
Steve´s suggestion is only deasent way to do that. -
I created a website layout template in Photoshop cs5 once i opened it into Dreamweaver i was trying to Align it to Center but it would not go center still stays to the left. I know that something is not right i am missing something and i am new to this not much experience with Dreamweaver, can someone please tell me how to fix this issue in a way a beginner would understand, i greatly appreciate the help.
Did you export HTML from PShop? Graphics apps generated code is not suitable for real web pages. It's really only acceptable for quick comps to show the client before you undertake the real work of building the layout in DW with HTML & CSS code.
To center pages, you need 3 basic things.
A valid doc type declaration on the first line of your code.
A stated width in px, % or ems.
A margin-left and margin-right of auto.
Copy & paste this code into a new, blank document in DW. Save and preview in browsers.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5, centered 1-col layout</title>
<style>
body {
margin:0;
padding:0;
background: #696;
font-family:Segoe, "Segoe UI", "DejaVu Sans", "Trebuchet MS", Verdana, sans-serif;
font-size: 100%;
#wrapper {
width:90%;
margin:0 auto; /**with width, this is centered on screen**/
padding:1%;
background: #FFF;
</style>
</head>
<body>
<div id="wrapper">
<h3>Heading 3</h3>
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris vitae libero lacus, vel hendrerit nisi! Maecenas quis velit nisl, volutpat viverra felis. Vestibulum luctus mauris sed sem dapibus luctus. Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius. Quisque varius scelerisque nunc eget rhoncus. Aenean tristique enim ut ante dignissim. </p>
<h3>Heading 3</h3>
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris vitae libero lacus, vel hendrerit nisi! Maecenas quis velit nisl, volutpat viverra felis. Vestibulum luctus mauris sed sem dapibus luctus. Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius. Quisque varius scelerisque nunc eget rhoncus. Aenean tristique enim ut ante dignissim. </p>
</div>
</body>
</html>
Nancy O. -
How do You import an MS Access MDB into Dreamweaver CS5?
Hi;
How do You import an MS Access MDB into Dreamweaver CS5?
Developed a DBase application for a vertical market using MS Access. Worked on it for over a decade.
Have been in contact with a rather large company and we are talking about licensing my program with them.
BUT; they want it "On the Cloud"
Here is what needs to be accomplished. Ideally a user can log in from anywhere, (similar to on-line banking), enter data and print reports.
Read this a few days ago:
"If I were in your situation and felt that there's a growth market for your offerings, I would personally go with a PHP/MySQL-based model. The printing issue can be readily resolved with PDF-based output.
So the Querys, Forms and VBA Code needs to be brought in from MS Access to Dreamweaver.
Can this be done? Or is there a better way that I haven't learned yet?
Would someone be so kind and point me in the correct direction.
Thank You for taking the time to read this post.
Andy>Can this be done?
No, not any way that I know of. You would need to completely rewrite this as a web application. Obviously the MS Access tables can be migrated to MySQL and the Access queries converted to views. But the forms and custom code needs to be written from scratch in html and your choice of server side programming language. -
How can I find (or at least get specs of) Dreamweaver CS6 layouts in Dreamweaver CC?
Hello!
I'm a student taking a course in web design, and many of our assignments require that I use liquid layouts from Dreamweaver CS6. The problem is that I have Dreamweaver CC (which cut out many of the templates), and buying the older version for this class seems silly.
Does anyone know where I can find the standard set of CS6 layouts to download? If not, does anyone know where I could at least find specs on those layouts? I'm proficient at coding and web scripting, but I don't want to be docked class points because I set a width to 75% instead of 80% or used an inconsistant class name.
Thank you for your help!If you have DWCC, you can also install DWCS6 for free as part of your CC Subscription...
http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html
FWIW, DWCC removes those old layouts because they were viewed as either redundant (since they were just variations of a base layout) and/or not current HTML standards compliant.
You can download DWCS6 and have access to all of them, open one, save it into your site and switch back to DWCC if you like.
As far as I know, they can't be added back into DWCC, but you get both programs as a CC subscriber, they just don't run at the same time. -
Inserting Images into Dreamweaver through Div Tag
Hi im quite new to Dreamweaver and i've got CS3...I've just
designed and sliced up a website in Photoshop and have started to
compile it together in Dreamweaver using HTML and CSS. I've just
added a Div tag and added images into the page and i've got stuck,
i cant seem to put another image next to one iv already placed
their.
I need help on how to work with Div Tags and applying images
so that i can fix my website like a Jigsaw.
I have provided the code i hav in my HTML so far...Maybe this will help you -
Taking a Fireworks comp to a CSS-based layout in Dreamweaver
http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt1.html
http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt2.html
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"DThandi" <[email protected]> wrote in
message
news:gk8anj$4qc$[email protected]..
> Let me show you the before and after images of the site
im working on,
> then
> maybe what im trying to describe can become more
clearer...Your right that
> i do
> need some basic understanding, I actually used to know
the answer to my
> own
> question but since i havn't played around with
Dreamweaver for a while i
> seem
> to have forgotten.
>
> This was the image on Photshop:
>
http://i187.photobucket.com/albums/x151/ohhchakdeh/SAMPLE.jpg
>
> This is where I am stuck now:
>
http://i187.photobucket.com/albums/x151/ohhchakdeh/stuck.jpg
>
> These are all the small images i have sliced up from
Photshop:
>
http://i187.photobucket.com/albums/x151/ohhchakdeh/Untitled.jpg
>
> As you can see i have trouble coding in HTML. So far i
have been
> following a
> tutorial video showing me how to had images and align
them through Div
> Tag...But now i am trying to put images side by side in
the Navigation
> area and
> on top of and underneath each other. As you can see i
have Home.jpg and
> Home-Scrap.jpg. Home Scrap needs to go under Home and
both of them images
> need
> to go next to image Left-Short.jpg.
>
> Thank You
> -
Hi my question abt 2 convert a list into pdf format
hi
experts
i had problem to convert displayed list into pdf format showing an error cannot open the file file format not supported, but i am have downloaded the file in .pdf format
please help me
thank you allHi,
check out this program. this might help:
report zabap_pdf.
tables:
tsp01.
data:
mstr_print_parms like pri_params,
mc_valid(1) type c,
mi_bytecount type i,
mi_length type i,
mi_rqident like tsp01-rqident.
*-- INTERNAL TABLES
data:
mtab_pdf like tline occurs 0 with header line,
mc_filename like rlgrap-filename.
*-- SELECTION SCREEN
parameters:
p_repid like sy-repid, " Report to execute
p_linsz like sy-linsz default 132, " Line size
p_paart like sy-paart default 'X_65_132'. " Paper Format
start-of-selection.
concatenate 'c:\'
p_repid
'.pdf'
into mc_filename.
*-- Setup the Print Parmaters
call function 'GET_PRINT_PARAMETERS'
exporting
authority= space
copies = '1'
cover_page = space
data_set = space
department = space
destination = space
expiration = '1'
immediately = space
in_archive_parameters = space
in_parameters = space
layout = space
mode = space
new_list_id = 'X'
no_dialog= 'X'
user = sy-uname
importing
out_parameters = mstr_print_parms
valid = mc_valid
exceptions
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
others = 4.
*-- Make sure that a printer destination has been set up
*-- If this is not done the PDF function module ABENDS
if mstr_print_parms-pdest = space.
mstr_print_parms-pdest = 'LOCL'.
endif.
*-- Explicitly set line width, and output format so that
*-- the PDF conversion comes out OK
mstr_print_parms-linsz = p_linsz.
mstr_print_parms-paart = p_paart.
submit (p_repid) to sap-spool without spool dynpro
spool parameters mstr_print_parms
via selection-screen
and return.
*-- Find out what the spool number is that was just created
perform get_spool_number using sy-repid
sy-uname
changing mi_rqident.
*-- Convert Spool to PDF
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
exporting
src_spoolid= mi_rqident
no_dialog = space
dst_device = mstr_print_parms-pdest
importing
pdf_bytecount = mi_bytecount
tables
pdf = mtab_pdf
exceptions
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
others = 12.
call function 'DOWNLOAD'
exporting
bin_filesize = mi_bytecount
filename = mc_filename
filetype = 'BIN'
importing
act_filename = mc_filename
tables
data_tab = mtab_pdf.
FORM get_spool_number *
Get the most recent spool created by user/report *
--> F_REPID *
--> F_UNAME *
--> F_RQIDENT *
form get_spool_number using f_repid
f_uname
changing f_rqident.
data:
lc_rq2name like tsp01-rq2name.
concatenate f_repid+0(8)
f_uname+0(3)
into lc_rq2name separated by '_'.
select * from tsp01 where rq2name = lc_rq2name
order by rqcretime descending.
f_rqident = tsp01-rqident.
exit.
endselect.
if sy-subrc ne 0.
clear f_rqident.
endif.
endform." get_spool_number -
Can I turn Frontpage webs into Dreamweaver ones?
Hi all
I've been designing a web on Frontpage 2002, but that
program, although OKAY, is pretty lame. Is it at all possible to
use the html from my Frontpage site, paste it into Dreamweaver (at
which I am also a novice) and do fancy stuff with it using CSS? Are
there any tutorials for this sort of thing?
ThanksBefore doing anything else, take a couple of weeks to
gothrough the DW
tutorials, and also to study HTML and CSS. The more you know
about those,
the easier your transition will be. DW expects alot more from
you than FP
did, and as a result, you may find it much more frustrating
to have the raw
reality of web development staring you in the face rather
than the wizards
of FP.
> Is there a way to convert a Frontpage site into a
> Dreamweaver site
1. I'd define a Dreamweaver site that points to a location on
your hard
drive for the local site's root, and to the current FP site
on the web as
the remote site
2. I'd use Dreamweaver (if your host supports FTP
connections) to download
the remote site to the root of the site you just defined on
the hard drive.
This will pick up all the pages *after* webbot action so that
shared borders
and all are already present in the page HTML. This will also
pick up all of
the server scripting. Note - in the event that you are not
able to connect
using FTP since some FP hosts block that protocol, you will
have to use a
third party 'site copier' like Black Widow, QuadSucker, or
WebCopier, (or
even the DW extension called SiteAssist from WebAssist) to
connect and
download using http protocols. Doing it this way will *not*
retrieve any of
your server-script code, if any (unless you have used the
WebAssist
extension).
3. I'd create a DW template for the pages, that captures the
"shared
border"
effect you had in FP.
4. I'd copy and paste content from each FP pages to a new
template child
page and then save the new child page with an easily
identifiable
nomenclature that is distinct from what was used on the FP
site (since you
are saving the new child pages into the same local site as
the FP pages).
5. When the basic site is completed, I'd upload the new DW
pages to some
staging area/webspace, and by using the browser, I'd verify
that the site
(as it now exists remotely) is complete.
6. Then I'd create a *new* DW site in a new location on the
hard drive, and
connect to and download all the files from the staging site.
7. You can now delete the original FP site from your local
system if you
want.
You now have a complete site (minus any of the FP extension
server-side
code) that has no FP footprint.
If you have used any FP server extension functions on the
original FP site
(form processing, guestbooks, tables of contents, includes,
etc.), you will
have to recreate those functions in DW using 3rd party
scripts, or scripts
that you write yourself.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"60251977" <[email protected]> wrote in
message
news:[email protected]...
> Hi all
>
> I've been designing a web on Frontpage 2002, but that
program, although
> OKAY,
> is pretty lame. Is it at all possible to use the html
from my Frontpage
> site,
> paste it into Dreamweaver (at which I am also a novice)
and do fancy stuff
> with
> it using CSS? Are there any tutorials for this sort of
thing?
> Thanks
>
>
Maybe you are looking for
-
Adobe Reader 10.1.4 Lock-Ups
Hello, When our campus users launch Adobe Reader 10.1.4 after logging on to a campus machine via a network account (with a re-directed app data folder) and launch a PDF from a network location by double-clicking it from Windows Explorer, Adobe Reader
-
Can you assign a default ring tone to a single Group (in 1 hit)?
Anyone know if you can assign the same ring tone to all members of a group WITHOUT having to go into each member of the group & do it 1 at a time? Thus you can have different ring tones for each group. You can do this on most other phones out there.
-
Can I use the iPad charger as a live USB hub?
If i was to use my iPad charger (after removing the cable), as a live USB hub for my external speakers, would that cause damage to the charger? Would this set up work? I've blown up a mac charger before with these experiments, don't wanna do another.
-
Hello friends while creating invoice the numbers are missing, for example we assign number range between 1 to 100 for a perticular invoice, once the invoice is created the system should take invoice number between 1 to 100 in a sequential manner , i
-
Windows 2003 server, Incompatible with Developer 6i and Oracle db 9i???
Hi, Is there some reason for migrating from Developer 6i and Oracle db 9i to 10g when operating system is migrated from Windows 2000 to Windows 2003 server??? Any document? whitepaper?? thanks